RESUMO
Extrusion-based 3D printing has emerged as the most versatile additive manufacturing technique for the printing of practically any material. However, 3D printing of functional materials often activates thermo-mechanical degradation, which affects the 3D shape quality. Herein, we describe the structural changes of eight different starch sources (normal or waxy) as a consequence of the temperature of an extrusion-based 3D printing system through in-depth characterization of their molecular and structural changes. The combination of size-exclusion chromatography, small-angle X-ray scattering, X-ray diffraction, dynamic viscoelasticity measurements, and in vitro digestion has offered an extensive picture of the structural and biological transformations of starch varieties. Depending on the 3D printing conditions, either gelatinization was attained ("moderate" condition) or single-amylose helix formation was induced ("extreme" condition). The stiff amylopectin crystallites in starch granules were more susceptible to thermo-mechanical degradation compared to flexible amorphous amylose. The crystalline morphology of the starch varieties varied from B-type crystallinity for the starch 3D printing at the "moderate" condition to a mixture of C- and V-type crystallinity regarding the "extreme" condition. The "extreme" condition reduced the viscoelasticity of 3D-printed starches but increased the starch digestibility rate/extent. In contrast, the "moderate" condition increased the viscoelastic moduli, decreasing the starch digestion rate/extent. This was more considerable mainly regarding the waxy starch varieties. Finally, normal starch varieties presented a well-defined shape fidelity, being able to form a stable structure, whereas waxy starches exhibited a non-well-defined structure and were not able to maintain their integrity after printing. The results of this research allow us to monitor the degradability of a variety of starch cultivars to create starch-based 3D structures, in which the local structure can be controlled based on the 3D printing parameters.
Assuntos
Amilose , Amido , Amido/química , Amilose/química , Amilopectina/análise , Amilopectina/química , Amilopectina/metabolismo , Difração de Raios X , TemperaturaRESUMO
By considering the hydrolysates of soy protein produced by trypsin as an example, the emulsion stabilizing properties of plant-based protein fragments have been investigated theoretically. We apply Self-Consistent-Field (SCF) calculations to determine the colloidal interactions induced between a pair of droplets stabilized by adsorbed layers of various soy protein fragments. The study is extended to conjugates of such polypeptides, formed by covalent bonding with a suitable hydrophilic sidechain (e.g. a polysaccharide). Our results show that the relatively longer fragments, with a greater number of hydrophobic amino acids, will display a stronger degree of adsorption affinity compared to the smaller hydrolysates, even where the latter may have a higher overall ratio of hydrophobic residues. This suggested that the degree of protein hydrolysis should be carefully controlled and limited to modest values to avoid the generation of a large number of short polypeptides, while still sufficient to improve solubility. While the emulsion stabilizing performance of a protein fragment type is strongly dependent on the conformation it adopts on the interface, we find this to be less critical for the conjugated polypeptides. However, we argue that with increasing degree of hydrolysis, many small fragments will not have the chance to form bonds with polysaccharides. It is demonstrated that the abundance of these unreacted polypeptides in the system severely reduces the efficiency of the conjugated longer protein fragments, preventing their presence on the surface of the droplets through competitive adsorption process.
Assuntos
Peptídeos , Proteínas de Soja , Emulsões/química , Proteínas de Soja/química , Hidrólise , Peptídeos/química , Polissacarídeos/química , Proteínas de PlantasRESUMO
We outline techniques for the control and measurement of the nucleation of crystalline materials. Small angle x-ray scattering/wide angle x-ray scattering x-ray diffraction measurements are presented that demonstrate the impact of low power, continuous, non-cavitational ultrasound on the nucleation and crystallization of a wax-n-eicosane dissolved in a heptane/toluene solvent. A mathematical-physical approach based on the rectification of heat and mass transport by such a low power oscillating pressure field is outlined, and it is suggested that this approach be combined with dissipative particle dynamics computational modeling to develop a predictive method capable of modeling the impact of low power oscillating pressure fields (acoustics and ultrasonics) on a wide range of nucleating systems. Combining the ultrasound pitch and catch speed of sound measurements with low power harmonically oscillating pressure fields to monitor and control nucleation presents the prospect of entirely new industrially significant methods of process control in crystallization. It also offers new insights into nucleation processes in general. However, for the acoustic control technique to be widely applied , further theoretical and modeling work will be necessary since, at present, we are unable to predict the precise effect of low power ultrasound in any given situation.
RESUMO
Conventionally, methanol is the solvent of choice in the synthesis of gamma-cyclodextrin metal-organic frameworks (γ-CD-MOFs), but using ethanol as a replacement could allow for a more food-grade synthesis condition. Therefore, the aim of the study was to compare the γ-CD-MOFs synthesised with both methanol and ethanol. The γ-CD-MOFs were characterised by scanning electron microscopy (SEM), surface area and pore measurement, Fourier transform infrared spectroscopy (FTIR) and powder X-ray diffraction (PXRD). The encapsulation efficiency (EE) and loading capacity (LC) of the γ-CD-MOFs were also determined for curcumin, using methanol, ethanol and a mixture of the two as encapsulation solvent. It was found that γ-CD-MOFs synthesised by methanol and ethanol do not differ greatly, the most significant difference being the larger crystal size of γ-CD-MOFs crystallised from ethanol. However, the change in solvent significantly influenced the EE and LC of the crystals. The higher solubility of curcumin in ethanol reduced interactions with the γ-CD-MOFs and resulted in lowered EE and LC. This suggests that different solvents should be used to deliberately manipulate the EE and LC of target compounds for better use of γ-CD-MOFs as their encapsulating and delivery agents.
RESUMO
Developing biocatalytic cascades in abiological conditions is of utmost significance, but such processes often suffer from low reaction efficiency because of incompatible reaction environments and suppressed intermediate transportation. Herein we report a new type of biocatalytic cascade by localizing two different enzymes separately in the outer and inner interfacial layers of Pickering emulsion droplets. This versatile approach enables the localization of two enzymes in their preferred reaction microenvironments and simultaneously in nanoscale proximity of each other. The thus-designed interfacial biocatalytic cascades show outstanding catalytic efficiency in alkene epoxidation and thioether oxidation with in situ generation of hydrogen peroxide under mild conditions, 6.9-13.6 times higher than the catalytic efficiency of the free enzymes in solution and their multi-enzymatic counterparts. The remarkable interfacial effect of Pickering droplets was found to be responsible for the significantly enhanced cascading efficiency.
RESUMO
Co-immobilization of enzymes and cofactors in a manner suitable for use in continuous flow catalysis remains a great challenge because of the difficulty in ensuring the free accessibility of immobilized enzymes and cofactors. Herein, we present a continuous flow catalysis system based on co-compartmentalization of enzymes and cofactors within Pickering emulsion droplets, enabling regeneration of cofactors within the droplets. As exemplified by enzyme-catalyzed ketone enantioselective reduction and enantioselective transamination, our systems exhibit long-term stability (300-400â h), outstanding total turnover number (TTN, 59204â mol mol-1 ) and several-fold enhancement in the enzyme catalytic efficiency (CEe ) in comparison to conventional biphasic reactions. As well as giving insight into the co-compartmentalization effects, our system will provide the opportunity to significantly advance continuous-flow biocatalysis towards the level of practical applications.
Assuntos
Enzimas Imobilizadas , Emulsões , Catálise , BiocatáliseRESUMO
It is possible that Pickering emulsions can optimize the transport of nutraceuticals, pharmaceuticals, and other bioactive compounds in human physiology. So-called ultrastable Pickering emulsions are often destabilized in the gastric digestion regime if the particles are proteinaceous in nature. The present study seeks to test how the interfacial structure can be engineered via synergistic particle-particle interactions to impact the gastric coalescence of Pickering emulsions. In this study, we designed plant-based protein-particle-stabilized oil-in-water emulsions (PPM-E, with 20 wt % sunflower oil) via pea protein microgels (PPM at 1 wt %). The PPM hydrodynamic diameter is â¼250 nm. In vitro gastric digestion of PPM-E confirmed droplet coalescence within 30 min of pepsin addition. Supposedly surface-active cellulose nanocrystals (CNCs, 1-3 wt %) were added to PPM-E at pH 3.0 to determine if they could act as a barrier to interfacial pepsinolysis due to the CNC and PPM being oppositely charged at this gastric pH value. A combination of confocal microscopy, zeta potential, and Langmuir trough measurements suggested that CNCs and PPMs might form a combined layer at the O/W interface, owing to the electrostatic attraction between them. CNCs at >2 wt % inhibited the pepsinolyis of the adsorbed PPM film and thus droplet coalescence. However, increasing concentrations of CNC also increased the bulk viscosity of the PPM-E and eventually caused gelation of the emulsions, which would also delay their gastric breakdown. In conclusion, tuning the bulk and interfacial structure of Pickering emulsions via synergistic interactions between two types of particles could be an effective strategy to modify the enzymatic breakdown of such emulsions, which would have important applications in pharmaceuticals, foods, and other soft-matter applications.
Assuntos
Microgéis , Nanopartículas , Celulose , Digestão , Emulsões , Humanos , Proteínas de PlantasRESUMO
The manufacture of next-generation 3D-printed foods with personalized requirements can be accelerated by in-depth knowledge of the development of a multifunctional biopolymeric-based ink. As a fat replacer in the food industry, microcrystalline cellulose (MCC) has the potential to address the growing need for sustainable healthy reduced-fat 3D printed foods. The modification of MCC structure by polyphenols gives the way to produce a multifunctional antioxidative Pickering emulsion with improved emulsifying properties. In this study, different types of polyphenols, including gallic acid (GA), tannic acid (TA), and cyanidin-3-O-glucoside (C3G), were individually used to synthesize the grafted MCC-g-polyphenol conjugates by the free-radical grafting method. Then, the antioxidative grafted microconjugates were added to a soy protein-based emulsion gel to partially substitute its oil, and each Pickering emulsion gel variant was printed through an extrusion-based 3D printing system. Emulsifying properties and antioxidant character of MCC were proven to be enhanced after the fabrication of grafted microconjugates. Compared to MCC-g-TA, MCC-g-GA and MCC-g-C3G could efficiently improve the stability of a reduced-fat soy-based emulsion gel upon storage. Moreover, the reduced-fat soy-based emulsion gel containing grafted microconjugates endowed a characteristic shear-thinning behavior with a gel-like structure and superlative thixotropic properties. Following the printing, the antioxidative Pickering emulsion gels containing grafted microconjugates produced well-defined 3D structures with superior lubrication properties. This study demonstrated that the grafting of polyphenols onto MCC could enhance bioactive properties and improve emulsifying performance of MCC, making it a useful component in the development of personalized functional foods.
Assuntos
Antioxidantes , Celulose , Polifenóis , Impressão Tridimensional , Emulsões , GéisRESUMO
The objective of this study was to investigate antibacterial activities and action mode of alkyl gallates against three food-related bacteria. Results show that the length of the alkyl chain plays a critical role in eliciting their antibacterial activities and octyl gallate (GAC8) exhibited an outstanding bactericidal effect against these strains. A possible bactericidal mechanism of GAC8 against E. coli was fully elucidated by analyzing associated changes in cellular functions of E. coli, including assessments of membrane modification and intracellular oxidation state. Our data strongly suggested that GAC8 functions outside and inside the bacterial membrane and causes increased intracellular reactive oxygen species (hydroxyl radicals) and subsequent oxidative damage. We demonstrated that the hydroxyl radical formation induced by GAC8 is the end product of an oxidative damage cellular death pathway involving a transient depletion of NADH, the tricarboxylic acid cycle, intrinsic redox cycling activities, and stimulation of the Fenton reaction. Also, chitosan-based edible films containing GAC8 have unique superiorities for icefish preservation at 4 °C. This research highlights the effectiveness of GAC8 as an attractive antibacterial, which possesses both antioxidant and antibacterial activities and can be used as a multifunctional food additive combined with the benefit of active packaging for food preservations.
Assuntos
Antibacterianos/farmacologia , Ésteres/farmacologia , Conservação de Alimentos/métodos , Conservantes de Alimentos/farmacologia , Ácido Gálico/análogos & derivados , Animais , China , Escherichia coli/efeitos dos fármacos , Escherichia coli/crescimento & desenvolvimento , Escherichia coli/metabolismo , Peixes/microbiologia , Conservação de Alimentos/instrumentação , Ácido Gálico/farmacologia , Testes de Sensibilidade Microbiana , Estresse Oxidativo/efeitos dos fármacosRESUMO
The force-displacement curve for removal of an elongated solid particle from the surface of liquid droplets or gas bubbles is calculated and compared to our previous reported results for spherical particles. The surface adsorption energy for prolate particles is known to be larger than that for spheres. We show that in fact the minimum possible work done upon removal of an elongated particle from surface can be less than that for a sphere. This result is obtained when the dissipation of interfacial energy, stored in the fluid film, attaching the particles to the surface during their displacement, is properly accounted for. This dissipation is unavoidable, even if the particles are removed infinitely slowly. Once the particle actually leaves the surface, the formed liquid bridge relaxes thus dissipating any stored interfacial energy as the surface returns to its original undistorted state. The difference between the work of removal of a particle from surface and its adsorption energy is seen to become increasingly larger with smaller particle to droplet size ratios. For example, for a size ratio of 1 : 100, the work of removal is 1.93 times greater than the adsorption energy. However, we also find that for any given size ratio, there is a value of particle aspect ratio for which the work of removal of particles (combined dissipated and adsorbed energy) attains its minimum value.
RESUMO
We describe a novel method to prepare a liquid-solid hybrid catalyst via interfacial growth of a porous silica crust around Pickering emulsion droplets, which allowed us to overcome the current limitations of both homogeneous and heterogeneous catalysts. The inner micron-scaled liquid (for example, ionic liquids) pool of the resultant catalyst can host free homogeneous molecular catalysts or enzymes to create a true homogeneous catalysis environment. The porous silica crust of the hybrid catalyst has excellent stability, which makes it amenable to packing directly in fixed-bed reactors for continuous flow catalysis. As a proof of concept, the enzymatic kinetic resolution of racemic alcohols, CrIII(salen) complex-catalyzed asymmetric ring opening of epoxides and Pd-catalyzed Tsuji-Trost allylic substitution reactions were used to verify the generality and versatility of our strategy for bridging homogeneous and heterogeneous catalysis. The hybrid catalyst-based continuous flow system exhibited a 1.6â¼16-fold enhancement in activity relative to homogeneous counterparts even over 1500 h, and the afforded enantioselectivities were completely equal to those obtained in the homogeneous counterpart systems. Interestingly, the catalytic efficiency can be tuned through rational engineering of the porous crust and the dimensions of the liquid pool, resulting in features of an innovatively designed catalyst. This contribution provides a new method to design efficient catalysts that can bridge the conceptual and technical gaps between homogeneous and heterogeneous catalysis.
RESUMO
We have computed the free energy per unit area (i.e., interfacial tension) between a solid surface and two coexisting polymer solutions, where there is no specific interaction between the particles and either polymer, via self-consistent field calculations. Several different systems have been studied, including those where the two polymers differ in molecular weight (Mw) by a factor of â¼2 or where the polymers have the same Mw, but one set of chains is branched with the other linear. In the absence of any enthalpic contribution resulting from adsorption on the solid particle surface, the differences in the free energy per unit area resulting from the polymer-depleted regions around the particles in the two coexisting phases are found to be â¼1 µN m-1. Although this value may seem rather small, this difference is more than capable of inducing the partitioning of particles of 100 nm in size (or larger) into the phase with the lower interfacial free energy at the solid surface. By examining the density profile variation of the polymers close to the surface, we can also infer information about the wettability and contact angle (θ) of solid particles at the interface between the two coexisting phases. This leads to the conclusion that for all systems of this type, when the incompatibility between the two polymers is sufficiently large, θ will be close to 90°.
RESUMO
We develop a novel strategy to more effectively and controllably process continuous enzymatic or homogeneous catalysis reactions based on nonaqueous Pickering emulsions. A key element of this strategy is "bottom-up" construction of a macroscale continuous flow reaction system through packing catalyst-containing micron-sized ionic liquid (IL) droplet in oil in a column reactor. Due to the continuous influx of reactants into the droplet microreactors and the continuous release of products from the droplet microreactors, catalysis reactions in such a system can take place without limitations arising from establishment of the reaction equilibrium and catalyst separation, inherent in conventional batch reactions. As proof of the concept, enzymatic enantioselective trans-esterification and CuI-catalyzed cycloaddition reactions using this IL droplet-based flow system both exhibit 8 to 25-fold enhancement in catalysis efficiency compared to their batch counterparts, and a durability of at least 4000 h for the enantioselective trans-esterification of 1-phenylethyl alcohol, otherwise unattainable in their batch counterparts. We further establish a theoretical model for such a catalysis system working under nonequilibrium conditions, which not only supports the experimental results but also helps to predict reaction progress at a microscale level. Being operationally simple, efficient, and adaptive, this strategy provides an unprecedented platform for practical applications of enzymes and homogeneous catalysts even at a controllable level.
RESUMO
Deformation of a spherical droplet or bubble containing a pair of particles on its surface is considered when equal but opposite forces are applied to the particles. The particles are placed opposite each other, thus providing a symmetric problem that is more amenable to analytical treatment. We extend our previous calculations concerning such arrangements with constant contact angles to situations where it is the contact line now that is pinned on the surface of the particles. The force-displacement curves are calculated as the particles are pulled apart and are found to be linear for small displacements. However, it is also found that the "Hookean constant" for the pinned contact line problem is different from the one derived for systems with a constant contact angle, the constant being larger if the pinned line is at the equator of the particles.
RESUMO
Emulsions stabilized by soft whey protein microgel particles have gained research interest due to their combined advantages of biocompatibility and a high degree of resistance to coalescence. We designed Pickering oil-in-water emulsions using whey protein microgels by a facile route of heat-set gel formation followed by mechanical shear and studied the influence of heat treatment on emulsions stabilized by these particles. The aim of this study was to compare the barrier properties of the microgel particles and heat-treated fused microgel particles at the oil-water interface in delaying the digestion of the emulsified lipids using an in vitro digestion model. A combination of transmission electron microscopy and surface coverage measurements revealed an increased coverage of heat-treated microgel particles at the interface. The heat-induced microgel particle aggregation and, therefore, a fused network at the oil-water interface were more beneficial to delay the rate of digestion in the presence of pure lipase and bile salts compared to intact whey protein microgel particles, as shown by the measurements of zeta potential and free fatty acid release, plus theoretical calculations. However, simulated gastric digestion with pepsin impacted significantly on such barrier effects, due to the proteolysis of the particle network at the interface irrespective of the heat treatment, as visualized using sodium dodecyl sulfate polyacryl amide gel electrophoresis measurements.
Assuntos
Temperatura Alta , Proteínas do Soro do Leite/química , Proteínas do Soro do Leite/metabolismo , Ácidos e Sais Biliares/química , Biomimética , Digestão , Emulsões , Ácidos Graxos não Esterificados/metabolismo , Géis , Mucosa Intestinal/metabolismo , Cinética , Lipase/metabolismo , Óleos/química , Tamanho da Partícula , Água/químicaRESUMO
We calculate the deformation of a spherical droplet, resulting from the application of a pair of opposite forces to particles located diametrically opposite at the two ends of the droplet. The free-energy analysis is used to calculate the force-distance curves for the generated restoring forces, arising from the displacement of the particles relative to each other. While the logarithmic dependence of the "de Gennes-Hooke" constant on the particle to droplet size ratio, ν, is rather well known in the limit of very small ν, we find that for more realistic particle to droplet size ratios, i.e. ν = 0.001 to 0.01, the additional constant terms of O(1) constitute a significant correction to previously reported results. We derive the restoring force constant to be 2πγ[0.5 - ln (ν/2)](-1), in perfect agreement with the exact semi-numerical analysis of the same problem. The deviation from the linear force-displacement behaviour, occurring close to the point of detachment, is also investigated. A study of the energy dissipated shows it to be an increasingly dominant component of the work done during the detachment of the particles, as ν decreases. This indicates the existence of a significantly higher energy barrier to desorption of very small particles, compared to the one suggested by their adsorption energy alone. The influence of the line tension on the detachment force is also considered. It is shown that where line tension is important, the contact angle is no longer a constant but instead alters with the displacement of the particles from their equilibrium positions.
Assuntos
Modelos Químicos , Propriedades de Superfície , TermodinâmicaRESUMO
Using a model based on the primary structure of αs1 -casein, the colloid stabilizing ability of fragmented protein and that of the intact chains are compared. We perform self consistent field (SCF) calculations to obtain the induced interaction potentials between the oil droplets, resulting from the overlap of adsorbed protein layers in each case. For the intact αs1 -casein, we confirm the known result, that the mediated interparticle interaction potential develops a deep attractive energy minimum at high salt concentrations and pH values close to the isoelectric point of the protein. The same does not occur for the appropriately fragmented systems, with improved emulsion stability predicted as a result, even at pH values close to pI. It is shown that this superior performance, for the case considered, is due to the diblock-type behavior of one of the fragments. However, it is well known that αs1 -casein more closely resembles the less favorable triblock structure. However, it is also demonstrated that the presence of a "diblock" like fragment by itself may not always be enough to produce a better emulsion stabilizer. It is seen that the hydrolysis of some peptide bonds may indeed lead to a suitable polypeptide, but that this is displaced from the interface by the structurally less desirable ones, also generated by the fragmentation process. The displacement occurs due to the competitive adsorption between different fragments. The removal of the undesirable fragments from the solution is found to greatly enhance the predicted colloid stabilizing ability of the remaining polypeptide.
Assuntos
Caseínas/química , Emulsões/química , Alimentos , Modelos Teóricos , Adsorção , Coloides , Peptídeos/química , Sais/química , SolventesRESUMO
The degree of shrinkage of particle stabilised bubbles of various sizes, in a polydisperse bubble dispersion, has been investigated in the light of the finite adsorption times for the particles and the disproportionation kinetics of the bubbles. For the case where the system contains an abundance of particles we find a threshold radius, above which bubbles are stabilised without any significant reduction in their size. Bubbles with an initial radius below this threshold on the other hand undergo a large degree of shrinkage prior to stabilisation. As the ratio of the available particles to the bubbles is reduced, it is shown that the final bubble size, for the larger bubbles in the distribution, becomes increasingly governed by the number of particles, rather than their adsorption time per se. For systems with "adsorption controlled" shrinkage ratio, the final bubble distribution is found to be wider than the initial one, while for a "particle number controlled" case it is actually narrower. Starting from a unimodal bubble size distribution, we predict that at intermediate times, prior to the full stabilisation of all bubbles, the distribution breaks up into a bimodal one. However, the effect is transient and a unimodal final bubble size distribution is recovered, when all the bubbles are stabilised by the particles.
Assuntos
Adsorção , Nanopartículas/química , Termodinâmica , Difusão , Cinética , Tamanho da Partícula , TemperaturaRESUMO
Flocculation is a type of aggregation where the surfaces of approaching droplets are still at distances no closer than a few nanometers while still remaining in close proximity. In a high internal-phase oil-in-water (O/W) emulsion, the state of flocculation affects the bulk flow behavior and viscoelasticity, which can consequently control the three-dimensional (3D)-printing process and printing performance. Herein, we present the assembly of O/W Pickering high-internal-phase emulsions (Pickering-HIPEs) as printing inks and demonstrate how depletion flocculation in such Pickering-HIPE inks can be used as a facile colloidal engineering approach to tailor a porous 3D structure suitable for drug delivery. Pickering-HIPEs were prepared using different levels of cellulose nanocrystals (CNCs), co-stabilized using "raw" submicrometer-sized sustainable particles from a biomass-processing byproduct. In the presence of this sustainable particle, the higher CNC contents facilitated particle-induced depletion flocculation, which led to the formation of a mechanically robust gel-like ink system. Nonetheless, the presence of adsorbed particles on the surface of droplets ensured their stability against coalescence, even in such a highly aggregated system. The gel structures resulting from the depletion phenomenon enabled the creation of high-performance printed objects with tunable porosity, which can be precisely controlled at two distinct levels: first, by introducing voids within the internal structure of filaments, and second, by generating cavities (pore structures) through the elimination of the water phase. In addition to printing efficacy, the HIPEs could be applied for curcumin delivery, and in vitro release kinetics demonstrated that the porous 3D scaffolds engineered for the first time using depletion-flocculated HIPE inks played an important role in 3D scaffold disintegration and curcumin release. Thus, this study offers a unique colloidal engineering approach of using depletion flocculation to template 3D printing of sustainable inks to generate next-generation porous scaffolds for personalized drug deliveries.
Assuntos
Celulose , Emulsões , Floculação , Tinta , Impressão Tridimensional , Porosidade , Emulsões/química , Celulose/química , Nanopartículas/química , Alicerces Teciduais/química , Humanos , Coloides/química , Sistemas de Liberação de Medicamentos , Tamanho da PartículaRESUMO
Hierarchically porous structures combine microporosity, mesoporosity, and microporosity to enhance pore accessibility and transport, which are crucial to develop high performance materials for biofabrication, food, and pharmaceutical applications. This work aimed to develop a 4D-printed smart hierarchical macroporous structure through 3D printing of Pickering-type high internal phase emulsions (Pickering-HIPEs). The key was the utilization of surface-active (hydroxybutylated) starch nanomaterials, including starch nanocrystals (SNCs) (from waxy maize starch through acid hydrolysis) or starch nanoparticles (SNPs) (obtained through an ultrasound treatment). An innovative procedure to fabricate the functionalized starch nanomaterials was accomplished by grafting 1,2-butene oxide using a cold plasma technique to enhance their surface hydrophobicity, improving their aggregation, and thus attaining a colloidally stabilized Pickering-HIPEs with a low concentration of each surface-active starch nanomaterial. A flocculation of droplets in Pickering-HIPEs was developed after the addition of modified SNCs or SNPs, leading to the formation of a gel-like structure. The 3D printing of these Pickering-HIPEs developed a highly interconnected large pore structure, possessing a self-assembly property with thermoresponsive behavior. As a potential drug delivery system, this thermoresponsive macroporous 3D structure offered a lower critical solution temperature (LCST)-type phase transition at body temperature, which can be used in the field of smart releasing of bioactive compounds.