Engineering van der Waals Contacts by Interlayer Dipoles.

Tuning the interfacial Schottky barrier with van der Waals (vdW) contacts is an important solution for two-dimensional (2D) electronics. Here we report that the interlayer dipoles of 2D vdW superlattices (vdWSLs) can be used to engineer vdW contacts to 2D semiconductors. A bipolar WSe2 with Ba6Ta11S28 (BTS) vdW contact was employed to exhibit this strategy. Strong interlayer dipoles can be formed due to charge transfer between the Ba3TaS5 and TaS2 layers. Mechanical exfoliation breaks the superlattice and produces two distinguished surfaces with TaS2 and Ba3TaS5 terminations. The surfaces thus have opposite surface dipoles and consequently different work functions. Therefore, all the devices fall into two categories in accordance with the rectifying direction, which were verified by electrical measurements and scanning photocurrent microscopy. The growing vdWSL family along with the addition surface dipoles enables prospective vdW contact designs and have practical application in nanoelectronics and nano optoelectronics.

Breaking the Temperature Limit of Lithium-Ion Batteries With Carbon Nanotube-Based Electrodes and "Constructive Alliance" Electrolyte Strategy.

Lithium-ion batteries (LIBs) are paramount in energy storage in consumer electronics and electric vehicles. However, a narrow operating temperature range severely constrains their evolution. In this study, a wide-temperature operating LIB system is constructed utilizing carbon nanotube (CNT)-based electrodes and a "constructive alliance" electrolyte. The unique microstructure of the CNT current collector, with high electrical and thermal conductivity, accelerates the reaction kinetics of active materials at subzero temperatures and optimizes the thermal management of the entire electrode at elevated temperatures. Furthermore, a strategy employing the "constructive alliance" electrolyte is proposed, demonstrating that a simple combination of commercially available electrolytes can enhance resilience to harsh thermal conditions. Molecular dynamics simulations and density functional theory calculations reveal that the hybrid electrolyte predominantly adopts aggregate solvation structures and possesses low Li+ desolvation barriers regardless of thermal variations. Consequently, the assembled Li4Ti5O12//LiCoO2 full cell, with a negative/positive electrode material ratio of 1.2, exhibits outstanding electrochemical performance in the wide temperature range of -40 and 60 °C. This innovative strategy overcomes challenges in wide-temperature electrolyte research and offers promise for next-generation wide-temperature LIBs.

Power Generation by Thermal Evaporation Based on a Button Supercapacitor.

Thermal evaporation generators exhibit remarkable output performance, sustainability, and economy and, as a result, have attracted considerable interest as a prospective energy-converting technology for harvesting renewable energy. Here, we investigate power generation induced by water evaporation within a button supercapacitor with a simple sandwich structure. For conventional water evaporation devices, the thermodiffusion direction of hydrated ions driven by the Soret effect is opposite to the migration direction of hydrated ions driven by the streaming potential effect during thermal evaporation, which could reduce the output performance of the device. By tuning the thermodiffusion direction to be consistent with the thermal evaporation direction, our button supercapacitor achieves enhanced output performance as high as 674.4 mV, 70.7 mA, and 4.68 mW cm-2 due to the synergistic mechanism of the streaming potential effect and the Soret effect. Moreover, the system could effectively achieve in situ energy generation and storage owing to the device's ability to act as a supercapacitor. Our findings supply a feasible strategy for the synergistic integration of waste energy sources (low-grade waste heat, etc.) to generate electricity.

Microheater Chips with Carbon Nanotube Resistors.

The specific and excellent properties of the low-dimensional nanomaterials have made them promising building blocks to be integrated into microelectromechanical systems with high performances. Here, we present a new microheater chip for in situ TEM, in which a cross-stacked superaligned carbon nanotube (CNT) film resistor is located on a suspended SiNx membrane via van der Waals (vdW) interactions. The CNT microheater has a fast high-temperature response and low power consumption, thanks to the micro/nanostructure of the CNT materials. Moreover, the membrane bulging amplitude is significantly reduced to only ∼100 nm at 800 °C for the vdW interaction between the CNTs and the SiNx membrane. An in situ observation of the Sn melting process is successfully conducted with the assistance of a customized flexible temperature control system. The uniform wafer-scaled CNT films enable a high level of consistency and cost-effective mass production of such chips. The as-developed in situ chips, as well as the related techniques, hold great promise in nanoscience, materials science, and electrochemistry.