The influence of dietary supplementation with cranberry tablets on the urinary risk factors for nephrolithiasis.

PURPOSE: Cranberry supplements are commonly used as a natural deterrent to urinary tract infection. However, one small study (n = 5) which showed an increase in urinary oxalate levels following cranberry supplementation has led to its use with caution among patients susceptible to nephrolithiasis. Furthermore, most commonly available cranberry tablet preparations contain vitamin C, which has been independently shown to increase urinary oxalate excretion. The aim of this study is to investigate the influence of cranberry supplementation on urinary oxalate excretion. METHODS: Fifteen participants were randomised to receive cranberry tablets alone or cranberry tablets containing vitamin C. Tablets were taken at the manufacturers recommended dosage for a period of 14 days. Participants provided a 24 h urine collection at trial entry and day 14. Urinary variables were compared to assess for changes in oxalate levels. RESULTS: The median age was 27 years (21-43). There was no difference in the 24 h urine volume pre or post commencement of cranberry tablets (1.7 vs 2 L, p = 0.07). An increase in median urinary oxalate excretion was observed in participants taking both cranberry-only tablets (0.10 mmol/day) and tablets containing vitamin C (1.15 mmol/day). CONCLUSION: Dietary supplementation with cranberry increases urinary oxalate excretion and should be avoided in patients at risk of urolithiasis.

Silver colloids as plasmonic substrates for direct label-free surface-enhanced Raman scattering analysis of DNA.

Ultrasensitive direct SERS analysis offers a powerful analytical tool for the structural characterization and classification of nucleic acids. However, acquisition of reliable spectral fingerprints of such complex biomolecules poses important challenges. In recent years, many efforts have been devoted to overcome these limitations, mainly implementing silver colloids as plasmonic substrates. However, a reliable cross-comparison of results reported in the recent literature is extremely hard to achieve, mostly due to the broad set of different surface properties of the plasmonic nanoparticles. Herein, we perform a thorough investigation of the role played by the metal/liquid interface composition of silver colloids in the direct label-free SERS analysis of DNA. Target molecules of increasing complexity, from short homopolymeric strands to long genomic duplexes, were used as probes. We demonstrate how apparently subtle changes in the colloidal surface chemistry can dramatically modify the affinity and the final SERS spectral profile of DNA. This has significant implications for the future design of new analytical strategies for the detection of DNA using SERS without labels.

1064 nm SERS of NIR active hollow gold nanotags.

Surface enhanced Raman scattering (SERS) tags are in situ probes that can provide sensitive and selective probes for optical analysis in biological materials. Engineering tags for use in the near infrared (NIR) region is of particular interest since there is an uncongested spectral window for optical analysis due to the low background absorption and scattering from many molecules. An improved synthesis has resulted in the formation of hollow gold nanoshells (HGNs) with a localised surface plasmon resonance (LSPR) between 800 and 900 nm which provide effective SERS when excited at 1064 nm. Seven Raman reporters containing aromatic amine or thiol attachment groups were investigated. All were effective but 1,2-bis(4-pyridyl)ethylene (BPE) and 4,4-azopyridine (AZPY) provided the largest enhancement. At approximately monolayer coverage, these two reporters appear to pack with the main axis of the molecule perpendicular or nearly perpendicular to the surface giving strong SERS and thus providing effective 1064 nm gold SERS nanotags.

Qualitative SERS analysis of G-quadruplex DNAs using selective stabilising ligands.

Nucleic acids are of key biological importance due to their range of functions and ability to form various different structures, with an example of emerging significance being quadruplexes formed by guanine-rich sequences. These guanine rich sequences are found in different regions of the genome such as telomeres, gene promoters and introns and UTRs of mRNAs. Here a new approach has been developed that utilises surface enhanced Raman scattering (SERS) for the detection of the formation of G-quadruplexes. Three G-quadruplex stabilising ligands that each have their own unique SERS response were used in this study and their ability to act as reporters assessed. A SERS response was only obtained from the ligands in the absence of G-quadruplex formation. This resulted in an "on/off" method which was successfully used to qualitatively detect the formation of G-quadruplex using quadruplex-forming sequences such as human telomeric and C-MYC promoter DNAs. The unique SERS spectra of each stabilising ligand offer the potential for use of SERS to study higher order DNA structures. This work shows that the ligands used can act simultaneously as a potential therapeutic stabilising agent and a SERS reporter, therefore allowing the use of SERS as a method of analysis of the formation of G-quadruplex DNAs.

Interaction of fluorescent dyes with DNA and spermine using fluorescence spectroscopy.

Oligonucleotides labelled with fluorescent dyes are widely used as probes for the identification of DNA sequences in detection methods using optical spectroscopies such as fluorescence and surface enhanced Raman scattering (SERS). Spermine is widely used in surface enhanced based assays as a charge reduction and aggregating agent as it interacts strongly with the phosphate backbone and has shown to enhance the signal of a labelled oligonucleotide. The fluorescence intensity of two commonly used labels, FAM and TAMRA, were compared when spermine was added under different experimental conditions. There was a marked difference upon conjugating the free dye to an oligonucleotide, when FAM was conjugated to an oligonucleotide there was around a six fold decrease in emission, compared to a six fold increase when TAMRA was conjugated to an oligonucleotide. Dye labelled single and double stranded DNA also behaved differently with double stranded DNA labelled with FAM being a much more efficient emitter in the mid pH range, however TAMRA becomes increasingly less efficient as the pH rises. Upon addition of the base spermine, signal enhancement from the FAM labelled oligonucleotide is observed. Increasing probe concentrations of TAMRA oligonucleotide above 0.5 µM led to signal reduction most likely through quenching, either by an interaction with guanine, or through self-quenching. By using different bases for comparison, spermine and triethylamine (TEA), different affects were observed in the measured fluorescence signals. When TEA was added to FAM, a reduction in the pH dependence of fluorescence was observed, which may be useful for mid pH range assays. With the drive to increase information content and decrease time and complexity of DNA assays it is likely that more assays will be carried out in complex media such as extracted DNA fragments and PCR product. This model study indicates that dye DNA and dye spermine interactions are dye specific and that extreme care with conditions is necessary particularly if it is intended to determine the concentrations of multiple analytes using probes labelled with different dyes.

Quantitative surface-enhanced resonance Raman scattering of phthalocyanine-labelled oligonucleotides.

The evaluation of phthalocyanine labels for the surface-enhanced resonance Raman scattering (SERRS) detection of oligonucleotides is reported. Three phthalocyanine-labelled oligonucleotides were assessed, each containing a different metal centre. Detection limits for each labelled oligonucleotide were determined using two excitation frequencies where possible. Limits of detection as low as 2.8 x 10(-11) mol. dm(-3) were obtained which are comparable to standard fluorescently labelled probes used in previous SERRS studies. The identification of two phthalocyanine-labelled oligonucleotides without separation was also demonstrated indicating their suitability for multiplexing. This study extends the range of labels suitable for quantitative surface-enhanced resonance Raman scattering with silver nanoparticles and offers more flexibility and choice when considering SERRS for quantitative DNA detection.

Introducing 12 new dyes for use with oligonucleotide functionalised silver nanoparticles for DNA detection with SERS.

Oligonucleotide functionalised metallic nanoparticles (MNPs) have been shown to be an effective tool in the detection of disease-specific DNA and have been employed in a number of diagnostic assays. The MNPs are also capable of facilitating surface enhanced Raman scattering (SERS) enabling detection to become highly sensitive. Herein we demonstrate the expansion of the range of specific SERS-active oligonucleotide MNPs through the use of 12 new Raman-active monomethine and trimethine chalcogenopyrylium and benzochalcogenopyrylium derivatives. This has resulted in an increased ability to carry out multiplexed analysis beyond the current small pool of resonant and non-resonant Raman active molecules, that have been used with oligonucleotide functionalised nanoparticles. Each dye examined here contains a variation of sulphur and selenium atoms in the heterocyclic core, together with phenyl, 2-thienyl, or 2-selenophenyl substituents on the 2,2',6, and 6' positions of the chalcogenopyrylium dyes and 2 and 2' positions of the benzochalcogenopyrylium dyes. The intensity of SERS obtained from each dye upon conjugate hybridisation with a complementary single stranded piece of DNA was explored. Differing concentrations of each dye (1000, 3000, 5000 and 7000 equivalents per NP-DNA conjugate) were used to understand the effects of Raman reporter coating on the overall Raman intensity. It was discovered that dye concentration did not affect the target/control ratio, which remained relatively constant throughout and that a lower concentration of Raman reporter was favourable in order to avoid NP instability. A relationship between the dye structure and SERS intensity was discovered, leaving scope for future development of specific dyes containing substituents favourable for discrimination in a multiplex by SERS. Methine dyes containing S and Se in the backbone and at least 2 phenyls as substituents give the highest SERS signal following DNA-induced aggregation. Principal component analysis (PCA) was performed on the data to show differentiation between the dye classes and highlight possible future multiplexing capabilities of the 12 investigated dyes.

Elucidation of the bonding of a near infrared dye to hollow gold nanospheres - a chalcogen tripod.

Infrared surface enhanced Raman scattering (SERS) is an attractive technique for the in situ detection of nanoprobes in biological samples due to the greater depth of penetration and reduced interference compared to SERS in the visible region. A key challenge is to understand the surface layer formed in suspension when a specific label is added to the SERS substrate in aqueous suspension. SERS taken at different wavelengths, theoretical calculations, and surface-selective sum frequency generation vibrational spectroscopy (SFG-VS) were used to define the surface orientation and manner of attachment of a new class of infrared SERS labels with a thiopyrylium core and four pendant 2-selenophenyl rings. Hollow gold nanospheres (HGNs) were used as the enhancing substrate and two distinct types of SERS spectra were obtained. With excitation close to resonance with both the near infrared electronic transition in the label (max 826 nm) and the plasmon resonance maximum (690 nm), surface enhanced resonance Raman scattering (SERRS) was obtained. SERRS indicates that the major axis of the core is near to perpendicular to the surface plane and SFG-VS obtained from a dried gold film gave a similar orientation with the major axis at an angle 64-85° from the surface plane. Longer excitation wavelengths give SERS with little or no molecular resonance contribution and new vibrations appeared with significant displacements between the thiopyrylium core and the pendant selenophene rings. Analysis using calculated spectra with one or two rings rotated indicates that two rings on one end are rotated towards the metal surface to give an arrangement of two selenium and one sulphur atoms directly facing the gold structure. The spectra, together with a space filled model, indicate that the molecule is strongly adsorbed to the surface through the selenium and sulphur atoms in an arrangement which will facilitate layer formation.

Laser induced SERS switching using plasmonic heating of PNIPAM coated HGNs.

This is the first report of SERS switching 'on and off' using laser induced plasmonic heating of poly(N-isopropylacrylamide) (PNIPAM) coated hollow gold nanoshells (HGNs). The degree of Raman enhancement for these thermosensitive SERS nanotags was controlled by plasmonic tuning of the properties of the HGNs.

Characterization of novel Ag on TiO2 films for surface-enhanced Raman scattering.

Novel Ag on TiO2 films are generated by semiconductor photocatalysis and characterized by ultraviolet-visible (UV/Vis) spectroscopy, scanning electron microscopy (SEM), and atomic force microscopy (AFM), as well as assessed for surface-enhanced Raman scattering (SERS) activity. The nature and thickness of the photodeposited Ag, and thus the degree of SERS activity, is controlled by the time of exposure of the TiO2 film to UV light. All such films exhibit the optical characteristics (lambda(max) congruent with 390 nm) of small (< 20 nm) Ag particles, although this feature becomes less prominent as the film becomes thicker. The films comprise quite large (> 40 nm) Ag islands that grow and merge with increasing levels of Ag photodeposition. Tested with a benzotriazole dye probe, the films are SERS active, exhibiting activity similar to that of 6-nm-thick vapor-deposited films. The Ag/TiO2 films exhibit a lower residual standard deviation (approximately 25%) compared with Ag vapor-deposited films (approximately 45%), which is, however, still unacceptable for quantitative work. The sample-to-sample variance could be reduced significantly (< 7%) by spinning the film during the SERS measurement. The Ag/TiO2 films are mechanically robust and resistant to removal and damage by scratching, unlike the Ag vapor-deposited films. The Ag/TiO2 films also exhibit no obvious loss of SERS activity when stored in the dark under otherwise ambient conditions. The possible extension of this simple, effective method of producing Ag films for SERS, to metals other than Ag and to semiconductors other than TiO2, is briefly discussed.

Assessment of silver and gold substrates for the detection of amphetamine sulfate by surface enhanced Raman scattering (SERS).

Methods of detection of amphetamine sulfate using surface enhanced Raman scattering (SERS) from colloidal suspensions and vapour deposited films of both silver and gold are compared. Different aggregating agents are required to produce effective SERS from silver and gold colloidal suspensions. Gold colloid and vapour deposited gold films give weaker scattering than the equivalent silver substrates when high concentrations of drug are analysed but they also give lower detection limits, suggesting a smaller surface enhancement but stronger surface adsorption. A 10(-5) mol dm(-3) solution (the final concentration after addition of colloid was 10(-6) mol dm(-3)) of amphetamine sulfate was detected from gold colloid with an RSD of 5.4%. 25 microl of the same solution could be detected on a roughened gold film. The intensities of the spectra varied across the film surface resulting in relatively high RSDs. The precision was improved by averaging the scattering from several points on the surface. An attempt to improve the detection limit and precision by concentrating a suspension of gold colloid and amphetamine sulfate in aluminium wells did not give effective quantitation. Thus, positive identification and semi-quantitative estimation of amphetamine sulfate can be made quickly and easily using SERS from suspended gold colloid with the appropriate aggregating agents.