RESUMO
The water-oil-rock system's surfactant and electrostatic interactions are essential for removing oil droplets from rock substrates. Our work illustrates the impact of surface charge on the oil contact angle in an ideal system comprising silica, water, and dodecane; smaller contact angles are observed for more polar substrates. Modifying the polarity of the model silica surface allows for the observation of the creation of heteromolecule channels and the process of stripping crude oil while accounting for the impacts of water flow and different types of surfactant molecules. In solutions containing ionic surfactants, the injection and diffusion of water molecules between the oil layer and the silica substrate are facilitated by the disturbance of the oil molecules by the surfactant molecules. By comparing different surfactants in water flow, the characterization of water molecular channels and the stripping process of crude oil can be observed. The disruption of oil molecules by the surfactant molecules has been found to enhance the injection and diffusion of water molecules between the oil layer and the silica substrate in solutions containing ionic surfactants. The size of the contact angle and the extension of the water channel are simultaneously greatly influenced by the surfactant's molecular characteristics and the substrate's polarity. These simulation results show that several factors influence the process of water molecule channel creation that water molecules diffuse, and the detachment of oil from the silica substrate is facilitated by the migration of surfactants to the bottom of the oil molecule and the electrostatic interactions between the water molecules and the silica substrate.
RESUMO
Ionic liquid as a chemical flooding agent has broad application prospect in enhancing oil recovery. In this study, a bifunctional imidazolium-based ionic liquid surfactant was synthesized, and its surface-active, emulsification capacity, and CO2 capture performance were investigated. The results show that the synthesized ionic liquid surfactant combines the characteristics of reducing interfacial tension, emulsification, and CO2 capture. The IFT values for [C12mim][Br], [C14mim][Br], and [C16mim][Br] could decrease from 32.74 mN/m to 3.17, 0.54, and 0.051 mN/m, respectively, with increasing concentration. In addition, the emulsification index values are 0.597 for [C16mim][Br], 0.48 for [C14mim][Br], and 0.259 for [C12mim][Br]. The surface-active and emulsification capacity of ionic liquid surfactants improved with the increase in alkyl chain length. Furthermore, the absorption capacities reach 0.48 mol CO2 per mol of ionic liquid surfactant at 0.1 MPa and 25 °C. This work provides theoretical support for further CCUS-EOR research and the application of ionic liquid surfactants.
RESUMO
Surfactants play an important role in enhancing oil recovery (EOR). With the development of tertiary oil recovery technology and the continuous improvement of environmental protection requirements, green environmentally friendly surfactants play an important role in replacing conventional surfactants. In this paper, cardanol polyoxyethylene ether (CPE) was synthesized from natural biomass cardanol. Its structure was characterized, and its surface/interface properties, salt and temperature resistance, wettability, emulsification, and oil displacement effect were studied experimentally. The results showed that CPE had good interfacial activity and temperature and salt tolerance, which can reduce the oil-water interfacial tension to 10-1 mN/m. The emulsion formed by CPE had good stability. With the increase in CPE dosage, the droplet size of the emulsion decreases. The emulsion stabilized by CPE can effectively enhance oil recovery by 11.8%. Therefore, CPE not only is environmentally friendly but also has great application potential in the field of EOR.
RESUMO
The emulsions formed by conventional surfactants have poor stability in high temperature and high salinity reservoirs, which limits the fluidity control ability of emulsion flooding systems. Hydroxyl sulfobetaine surfactants have excellent emulsifying properties and can maintain good activity under high temperature and high salinity conditions. In this study, an emulsion synergistic-stabilized by hydroxyl sulfobetaine surfactant LHSB and SiO2 nanoparticles was reported for the first time, and the feasibility of its enhanced oil recovery was investigated. The results show that the stability, temperature and salt resistance of the emulsion were significantly improved after adding nanoparticles, which positively affected the exploitation of harsh reservoirs. The synergistic-stabilized mechanism between LHSB and SiO2 nanoparticles was revealed by the measurements of zeta potential, surface tension and contact angle. Moreover, core flooding experiments reflect the emulsion synergistic-stabilized by LHSB and SiO2 nanoparticles can effectively enhance oil recovery by 11.41%. This study provides an emulsion flooding system with excellent performance for enhanced oil recovery in harsh reservoirs.
RESUMO
Water-sensitivity damage is inevitable during hydraulic fracturing for tight reservoir stimulation. A polymer clay stabilizer is the most effective and commonly used agent for reducing this kind of permeability damage. However, due to the small pore throat radii of tight reservoirs, polymers may be captured and detained, resulting in secondary permeability damage caused by polymer plugging. Therefore, it is necessary to clarify the matching relationship between the relative molecular mass of the clay stabilizer and the permeability of tight cores, which has not been reported yet. In response to this problem, the residual resistance factor and the permeability damage rate of PDMDAAC (poly dimethyl diallyl ammonium chloride, a kind of commonly used polymer clay stabilizer) to tight cores from Xinjiang Oilfield were investigated in cores with permeabilities of 0.10 × 10-3 µm2 (0.08-0.17 × 10-3 µm2), 0.05 × 10-3 µm2 (0.035-0.065 × 10-3 µm2), and 0.01 × 10-3 µm2 (0.007-0.020 × 10-3 µm2) through flow experiments. It was found that the relative molecular masses of PDMDAAC, which did not cause obvious core permeability damage, should be less than 10â¯000, 5000, and 2000, respectively. In addition, the bridging flocculation principle between the hydrodynamics radius of the clay stabilizer and the radius of the tight core pore throat can be used to explain the matching relationship between the relative molecular mass of the polymer clay stabilizer and the permeability of the tight reservoir. This study points out the direction for the optimization of the polymer clay stabilizer used in tight reservoir hydraulic fracturing and provides some references for the construction of hydraulic fracturing fluid systems for the efficient development of unconventional oil and gas resources.
RESUMO
Welan gum is one of the most promising polymers used in polymer flooding for enhancing oil recovery, due to its excellent temperature resistance and salt-tolerance performance. However, welan gum, as a polymer with higher molecular weight, can be adsorbed and detained in the pore throat of the reservoir, which is characterized by a smaller size. Montmorillonite, a kind of clay mineral with high content in reservoir rocks, has strong adsorption capacity. Therefore, the adsorption behavior of welan gum on montmorillonite, as well as its influencing factors, are studied in this paper. The results show that the adsorption capacity is 2.07 mg/g. The adsorption capacity decreased with the increase in temperature. Both acidic and alkaline conditions reduced the adsorption capacity. The existence of inorganic salt affected the adsorption capacity. In addition, the higher the cation value, the lower the adsorption capacity. The characterization tests showed that the adsorption of welan gum on montmorillonite was characterized by physical adsorption and surface adsorption, indicating that there were no changes in the internal structure of montmorillonite. This study provides feasible methods to reduce the amount of welan gum adsorbed on montmorillonite, which is of great significance for reducing the permeability damage caused by welan gum adsorption and promoting the application of welan gum in polymer flooding for enhancing oil recovery.
RESUMO
The composite flooding system composed of a surfactant and nanoparticles has shown great application potential in enhancing oil recovery. However, at present, these research studies are mainly focused on anionic surfactants. Relatively speaking, alkanolamide (CDEA), a nonionic surfactant, has the characteristics of a small adsorption amount on the rock surface, no cloud point, good temperature resistance, and good salt resistance. However, to the best of our best knowledge, there is no research report on the composite flooding system composed of CDEA and nanoparticles. Therefore, the surfactant/nanoparticle (S/NP) flooding system based on CDEA and nano-SiO2 was studied in this paper. The S/NP flooding system (0.1% CDEA + 0.05% SiO2) was constructed based on the performance in reducing the oil-water interfacial tension (IFT) and the stability of the composite system. The IFT between the S/NP flooding system and the crude oil can reach ultra-low values (3 × 10-3 mN/m), and there is no obvious sedimentation within 72 h. The sandpack flood tests show that the oil recovery rate is increased by 16.8% compared with water flooding and finally reaches 58.2%. Based on micromodel flooding tests, the mechanisms of the S/NP flooding system are studied as follows: the synergistic effect of nanoparticles and surfactants can re-enforce its oil-water interface performance and improve the oil displacement efficiency and the Jamin effect of emulsified oil droplets, combined with the thickening property and retention plugging of nanoparticles, improves the sweep efficiency. As the surfactant and nanoparticle used in this study are commercially available industrial products, the research results have important guiding significance for promoting the industrial application of surfactant/nanoparticle composite flooding technology.
RESUMO
To effectively investigate the influence of activated carbon on the adsorption of volatile organic compounds (VOCs), physical and chemical factors of activated carbon including pore wall thickness, pore size, and functional groups were studied using grand canonical Monte Carlo (GCMC) simulation. In addition, benzene and acetone were taken as two representative components of VOCs. Simulation results was presented by the changes in characteristics of benzene and acetone. The results show that at the saturated vapor pressure (P0), the adsorption density hardly varies with the mentioned factors of activated carbon. Differently, the saturated adsorption capacity increases considerably with the rise of pore size or the reduction of pore wall thickness, and the rise of pore size also leads to a dramatic increase in adsorption layer and a subsequent fall in ordering. However, when the pressure is less than 0.001P0, the monomolecular interaction energy and the isosteric heat are strengthened greatly with the addition of carboxyl and amino groups, while the threshold pressure shows an opposite change to the monomolecular interaction energy. In the meantime, the decrease of pore size or the increase of pore wall thickness will result in the same results. Findings in this paper can provide valuable insights into the microscopic mechanisms of the adsorption between activated carbon and VOCs.
Assuntos
Carvão Vegetal , Compostos Orgânicos Voláteis , Adsorção , Benzeno , Simulação por ComputadorRESUMO
Graphene and its derivatives, with their unique two-dimensional structures and excellent physical and chemical properties, have been an international research hotspot both in the research community and industry. However, in application-oriented research in the oil and gas industry they have only drawn attention in the past several years. Their excellent optical, electrical, thermal and mechanical performance make them great candidates for use in oil and gas exploration, drilling, production, and transportation. Combined with the actual requirements for well working fluids, chemical enhanced oil recovery, heavy oil recovery, profile control and water shutoff, tracers, oily wastewater treatment, pipeline corrosion prevention treatment, and tools and apparatus, etc., this paper introduces the behavior in water and toxicity to organisms of graphene and its derivatives in detail, and comprehensively reviews the research progress of graphene materials in the upstream oil and gas industry. Based on this, suggestions were put forward for the future research. This work is useful to the in-depth mechanism research and application scope broadening research in the upstream oil and gas industry.