RESUMO
A structured double-period CsI scintillation screen was successfully developed to improve its detection efficiency based on an oxidized silicon micropore array template with a period value on the order of micro-scale. The structure comprises a main structure along with a sub-structure. The main structure with a period of 8â µm was arranged in a square array consisting of square columnar scintillator units. The micropore walls between the main structure units were purposely fabricated from a SiO2-Si-SiO2 layered structure. The pore walls in commonly used single-structure with a period of 4â µm use the same layered structure composition to obtain a fair comparison. The thickness of both Si and the SiO2 layers was around 0.4â µm. The unique feature of the double structure lies in the even separation of each unit within the main structure into four square columnar scintillator sub-units. These four sub-units within each sub-structure were isolated solely by SiO2 layers with a thickness of approximately 0.8â µm. As a result, the X-ray-induced optical luminescence intensity of the double-structure screen exhibited a 31% increase compared to the corresponding single-structure scintillation screen. In X-ray imaging, a spatial resolution of 109 lp/mm was achieved, which closely matched the results obtained with the single-structure CsI screen. Furthermore, the detective quantum efficiency also displayed a notable improvement.
RESUMO
Structured scintillation screen based on oxidized Si micropore array template can effectively improve the spatial resolution of X-ray imaging. The purpose of this study is to investigate the effect of SiO2 layer thickness on the light guide and X-ray imaging performance of CsI scintillation screen when the structural period is as small as microns. Cylindrical micropores with a period of 4.3â µm, an average diameter of 3.3â µm and a depth of about 40â µm were prepared in Si wafers. SiO2 layer was formed on the pore walls after thermal oxidation. Increasing SiO2 layer thickness would be beneficial to the propagation of scintillation light along the cylindrical channels. What was not previously anticipated was that the pore size gradually shrank as the SiO2 layer thickened. The pore shrinkage would reduce the filling rate of CsI in the templates and thus would reduce the production of scintillation light. The structured CsI scintillation screens with different SiO2 layer thicknesses were fabricated by filling CsI scintillator into the oxidized silicon micropore array template. The morphology, crystallinity, X-ray excited optical luminescence, and X-ray imaging performance of the screens were studied. The results show that the spatial resolutions of X-ray images measured using the structured CsI scintillation screens with different SiO2 layer thicknesses are close to each other, and they are all about 110 lp/mm. However, the X-ray excited optical luminescence of the screen and detective quantum efficiency of X-ray imaging vary with the thickness of the SiO2 layer. The optimal thickness is about 350â nm.
RESUMO
To obtain better light guidance and optical isolation effects under a limited microcolumn wall thickness, the influence of the thickness of a SiO2 reflective layer on the performance of a structured CsI(Tl) scintillation screen based on an oxidized Si micropore array template in X-ray imaging was simulated. The results show that the SiO2 reflective layer should maintain a certain thickness to achieve good light-guide performance. However, if the template is entirely composed of SiO2, the light isolation performance of the microcolumn wall will be slightly worse. The results provide a basis for optimizing the thickness of SiO2 reflective layer.
RESUMO
BACKGROUND: Renal fibrosis is the strongest prognostic predictor of end-stage renal disease (ESRD) in chronic kidney disease (CKD). Diffusion kurtosis imaging (DKI) is a promising method of magnetic resonance imaging successfully used to assess renal fibrosis in immunoglobulin A nephropathy. This study aimed to be the first to evaluate the long-term prognostic value of DKI in CKD patients. METHODS: Forty-two patients with CKD were prospectively enrolled, and underwent DKI on a clinical 3T MR scanner. We excluded patients with comorbidities that could affect the volume or the components of the kidney. DKI parameters, including mean Kurtosis (K), mean diffusivity and apparent diffusion coefficient (ADC) of kidney cortex were obtained by region-of-interest measurement. We followed up these patients for a median of 43 months and investigated the correlations between each DKI parameter and overall renal prognosis. RESULTS: Both K and ADC values were correlated well with the estimated glomerular filtration rate (eGFR) on recruitment and the eGFR of the last visit in follow-up (P Ë 0.001). K and ADC values were also well associated with the eGFR slopes in CKD patients, both with the first-last time point slope (P = 0.011 and P Ë 0.001, respectively) and with the regression slope (P = 0.010 and P Ë 0.001, respectively). Cox proportional hazard regression indicated that lower eGFR and ADC values independently predicted eGFR loss of Ë30% and ESRD. The receiver operating characteristic analysis showed that K and ADC values were predictable for renal prognosis, and ADC displayed better capabilities for both ESRD [area under the curve (AUC) 0.936, sensitivity 92.31%, specificity 82.76%] and the composite endpoint (eGFR loss Ë30% or ESRD) (AUC 0.881, sensitivity 66.67%, specificity 96.3%). CONCLUSIONS: Renal ADC values obtained from DKI showed significant predictive value for the prognosis of CKD patients, which could be a promising noninvasive technique in follow-up.
Assuntos
Falência Renal Crônica , Insuficiência Renal Crônica , Biomarcadores , Fibrose , Humanos , Falência Renal Crônica/diagnóstico por imagem , Prognóstico , Insuficiência Renal Crônica/diagnóstico por imagem , Sensibilidade e EspecificidadeRESUMO
ß-Ga2O3 semiconductor crystal is of wide band gap and high radiation resistance, which shows great potential for applications such as medical imaging, radiation detections, and nuclear physical experiments. However, developing ß-Ga2O3-based X-ray radiation detectors with high sensitivity, fast response speed, and excellent stability remains a challenge. Here we demonstrate a high-performance X-ray detector based on a Fe doped ß-Ga2O3 (ß-Ga2O3:Fe) crystal grown by the float-zone growth method, which consists of two vertical Ti/Au electrodes and a ß-Ga2O3:Fe crystal with high resistivity. The resistivity of the ß-Ga2O3:Fe crystal exceeds 1012 Ω cm owed to the compensation of the Fe ions and the free electrons. The detector shows short response time (0.2 s), high sensitivity (75.3 µC Gyair -1 cm-2), and high signal-to-noise ratio (100), indicating great potential for X-ray radiation detection.
RESUMO
To address the reduction in the detection efficiency of a structured CsI(Tl) scintillation screen when its structure period reaches the order of microns, a dual-periodic structure of the screen is proposed. The special feature of the dual structure is that each unit of the primary structure is divided equally into either four or nine square column-shaped scintillation sub-units. The sub-units are separated only by SiO2 layers to form a secondary structure. The results show that the performance of a dual-structure CsI(Tl) screen in X-ray imaging is much better than that of a corresponding single-structure screen.
RESUMO
ß-Ga2O3 is a new type of fast scintillator with potential applications in medical imaging and nuclear radiation detection with high count-rate situations. Because of the severe total internal reflection with its high refractive index, the light extraction efficiency of ß-Ga2O3 crystals is rather low, which would limit the performance of detection systems. In this paper, we use hollow nanosphere arrays with a high-index contrast to enhance the light extraction efficiency of ß-Ga2O3 crystals. We can increase the transmission diffraction efficiency and reduce the reflection diffraction efficiency through controlling the refractive index and the thickness of the shell of the hollow nanospheres, which can lead to a significant increase in the light extraction efficiency. The relationships between the light extraction efficiency and the refractive index and thickness of the shell of the hollow nanospheres are investigated by both numerical simulations and experiments. It is found that when the refractive index of the shell of the hollow nanospheres is higher than that of ß-Ga2O3, the light extraction efficiency is mainly determined by the diffraction efficiency of light transmitted from the surface with the hollow nanosphere arrays. When the refractive index of the shell is less than that of ß-Ga2O3, the light extraction efficiency is determined by the ratio of the diffraction efficiency of the light transmitted from the surface with the hollow nanosphere arrays to the diffraction efficiency of the light that can escape from the lateral surface.
RESUMO
ß-Ga2O3 is a promising candidate as a fast scintillation crystal for radiation detection in fast X-ray imaging and high-energy physics experiments. However, total internal reflection severely limits its light output. Conventional photonic crystals can improve the light output, but such improvement decreases dramatically with increased scintillator thickness due to the strong backward reflection by the photonic crystals. Here, graded-refractive-index photonic crystals composed of nanocone arrays are designed and fabricated on the surfaces of ß-Ga2O3 crystals with various thicknesses. Compared to the conventional photonic crystals, there is still an obvious light output improvement by using the graded-refractive-index photonic crystals when the thickness of the crystals is increased by three times. The effect of thickness on the improved light output is investigated with numerical simulations and experiments. Overall, the graded-refractive-index photonic crystals are beneficial to the improvement of light output from thick scintillators.
RESUMO
Scintillators play an important role in the field of nuclear radiation detection. However, the light output of the scintillators is often limited by total internal reflection due to the high refractive indices of the scintillators. Furthermore, the light emission from scintillators typically has an approximately Lambertian profile, which is detrimental to the collection of the light. In this paper, we demonstrate a promising method to achieve enhancement of the light output from scintillators through use of mixed-scale microstructures that are composed of a photonic crystal slab and a microlens array. Simulations and experimental results both show significant improvements in the scintillator light output. The X-ray imaging characteristics of scintillators are improved by the application of the mixed-scale microstructures. The results presented here suggest that the application of the proposed mixed-scale microstructures to scintillators will be beneficial in the nuclear radiation detection field.
RESUMO
Today, a large number of targets operate in space, and there are mainly four kinds of attitude targets: triaxial stabilized targets, spin stabilized targets, triaxial stabilized targets on tumbling, and spin stabilized targets on tumbling. It is of great significance to classify and identify these targets. First, the infrared radiation characteristic model of the target is established, taking different attitude targets into account, which, to the best of our knowledge, has seldom been considered. Then, through the simulation of specific example targets, the differences in infrared characteristics of four kinds of attitude targets are analyzed and explained. Finally, according to the orbit distribution and typical geometry structure of space targets, the infrared characteristic data sets of four kinds of attitude targets are simulated, and a classifier is established to classify and recognize these targets. The results show that the infrared characteristics of different attitude targets are obviously different, and the classifier can successfully classify and recognize different attitude targets.
RESUMO
The low light-extraction efficiency of scintillators is due to total internal reflection and has led to the extensive use of photonic crystals to improve the light output. However, in some applications, photonic crystals cannot be fabricated directly on scintillators. Here, we demonstrate a promising method to improve the light output of scintillators by using a buffer layer coated with photonic crystals and then fixed to the scintillator. Through both numerical simulations and experiments, we investigate how the refractive indexes of the buffer layer and photonic crystal affect the light output from scintillators. The experimental results indicate that the light output of (Lu,Y)2SiO5:Ce scintillators is enhanced 1.9 times by using a sapphire buffer layer coated with an array of polystyrene nanospheres. This method can be used to improve the detection efficiency of radiation-detection systems when photonic crystals cannot be fabricated directly on the scintillator.
RESUMO
BACKGROUND: Biopsy Gleason score (GS) is crucial for prostate cancer (PCa) treatment decision-making. Upgrading in GS from biopsy to radical prostatectomy (RP) puts a proportion of patients at risk of undertreatment. PURPOSE: To develop and validate a radiomics model based on multiparametric magnetic resonance imaging (mp-MRI) to predict PCa upgrading. STUDY TYPE: Retrospective, radiomics. POPULATION: A total of 166 RP-confirmed PCa patients (training cohort, n = 116; validation cohort, n = 50) were included. FIELD STRENGTH/SEQUENCE: 3.0T/T2 -weighted (T2 W), apparent diffusion coefficient (ADC), and dynamic contrast enhancement (DCE) sequences. ASSESSMENT: PI-RADSv2 score for each tumor was recorded. Radiomic features were extracted from T2 W, ADC, and DCE sequences and Mutual Information Maximization criterion was used to identify the optimal features on each sequence. Multivariate logistic regression analysis was used to develop predictive models and a radiomics nomogram and their performance was evaluated. STATISTICAL TESTS: Student's t or chi-square were used to assess the differences in clinicopathologic data between the training and validation cohorts. Receiver operating characteristic (ROC) curve analysis was performed and the area under the curve (AUC) was calculated. RESULTS: In PI-RADSv2 assessment, 67 lesions scored 5, 70 lesions scored 4, and 29 lesions scored 3. For each sequence, 4404 features were extracted and the top 20 best features were selected. The radiomics model incorporating signatures from the three sequences achieved better performance than any single sequence (AUC: radiomics model 0.868, T2 W 0.700, ADC 0.759, DCE 0.726). The combined mode incorporating radiomics signature, clinical stage, and time from biopsy to RP outperformed the clinical model and radiomics model (AUC: combined model 0.910, clinical model 0.646, radiomics model 0.868). The nomogram showed good performance (AUC 0.910) and calibration (P-values: training cohort 0.624, validation cohort 0.294). DATA CONCLUSION: Radiomics based on mp-MRI has potential to predict upgrading of PCa from biopsy to RP. LEVEL OF EVIDENCE: 3 TECHNICAL EFFICACY: Stage 5 J. Magn. Reson. Imaging 2020;52:1239-1248.
Assuntos
Prostatectomia , Neoplasias da Próstata , Biomarcadores , Biópsia , Humanos , Imageamento por Ressonância Magnética , Masculino , Neoplasias da Próstata/diagnóstico por imagem , Neoplasias da Próstata/cirurgia , Estudos RetrospectivosRESUMO
BACKGROUND: BTBD7_hsa_circ_0000563, which is located on chromosome 14, contains conserved binding sites with miR-155/130a and RNA-binding proteins according to bioinformatic prediction. We investigated the association of BTBD7_hsa_circ_0000563 expression in coronary artery segments with atherosclerotic stenosis and identified the proteome-wide BTBD7_hsa_circ_0000563-regulated proteins in human coronary artery. METHODS: The atherosclerotic grade and extent in coronary artery segments were determined by hematoxylin and eosin staining. BTBD7_hsa_circ_0000563 expression in eight coronary artery segments from one patient was quantified by RT-qPCR assay. A proteomic approach was adopted to reveal significant differences in protein expression between among four groups differing in their BTBD7_hsa_circ_0000563 expression levels. RESULTS: The RT-qPCR assay revealed that coronary artery segments with severe atherosclerotic stenosis had significantly low BTBD7_hsa_circ_0000563 levels. The proteomic analysis identified 49 differentially expressed proteins among the segment groups with different BTBD7_hsa_circ_0000563 expression levels, of which 10 were downregulated and 39 were upregulated with increases in the BTBD7_hsa_circ_0000563 level. The 10 downregulated proteins were P61626 (LYSC_HUMAN), P02760 (AMBP_HUMAN), Q02985 (FHR3_HUMAN), P01701 (LV151_HUMAN), P06312(KV401_HUMAN), P01624 (KV315_HUMAN), P13671 (CO6_HUMAN), P01700(LV147_HUMAN), Q9Y287(ITM2B_HUMAN), and A0A075B6I0 (LV861_HUMAN). The top 10 upregulated proteins were Q92552 (RT27_HUMAN), Q9UJY1(HSPB8_HUMAN), Q9Y235(ABEC2_HUMAN), P19022 (CADH2_HUMAN), O43837(IDH3B_HUMAN), Q9H479(FN3K_HUMAN), Q9UM22(EPDR1_HUMAN), P48681(NEST_HUMAN), Q9NRP0(OSTC_HUMAN), and Q15628(TRADD_HUMAN). CONCLUSION: BTBD7_hsa_circ_0000563 is involved in the atherosclerotic changes in human coronary artery segments. Verification, mechanistic, and function studies are needed to confirm whether patients with coronary artery disease would benefit from such personalized medicine in the future.
Assuntos
Vasos Coronários , Proteoma , RNA Circular , Idoso , Vasos Coronários/química , Vasos Coronários/metabolismo , Regulação da Expressão Gênica/genética , Humanos , Masculino , Pessoa de Meia-Idade , Mapas de Interação de Proteínas/genética , Proteoma/análise , Proteoma/genética , Proteoma/metabolismo , Proteômica , RNA Circular/genética , RNA Circular/metabolismoRESUMO
The influence of silicon wall thickness on the performance of structured CsI(Tl) scintillation screen based on oxidized silicon micropore array template in X-ray imaging was simulated using Geant4 Monte Carlo simulation code in terms of light output (LO), modulation transfer function (MTF) and detective quantum efficiency (DQE). The results show that when the thickness of the silicon wall is less than 0.5 µm, the increase in the bottom light output (BLO) of the screen and the decrease in the spatial resolution of the X-ray imaging system using the screen become more significant as the thickness decreases. At low spatial frequency, the thicker the silicon wall, the lower the DQE. However, the DQE with a thick silicon wall can exceed the DQE with a thin silicon wall at high spatial frequency. All the results provide the quantitative relation between the silicon wall thickness of the structured CsI(Tl) scintillation screen and the quality of the X-ray imaging.
RESUMO
Plastic scintillators are widely used in various radiation measurement systems. However, detection efficiency and signal-to-noise are limited due to the total internal reflection, especially for weak signal detection situations. In the present investigation, large-area photonic crystals consisting of an array of periodic truncated cone holes were prepared based on hot embossing technology aiming at coupling with the surface of plastic scintillator to improve the light extraction efficiency and directionality control. The experimental results show that a maximum enhancement of 64% at 25° emergence angle along Γ-M orientation and a maximum enhancement of 58% at 20° emergence angle along Γ-K orientation were obtained. The proposed fabrication method of photonic crystal scintillator can avoid complicated pattern transfer processes used in most traditional methods, leading to a simple, economical method for large-area preparation. The photonic crystal scintillator demonstrated in this work is of great value for practical applications of nuclear radiation detection.
RESUMO
The total internal reflection restricts light extraction efficiency of scintillator, leading to reduced detection efficiency and signal-to-noise ratio in the field of scintillator-based radiation detection system. This research presents the method of applying microlens arrays to improve the light extraction efficiency as well as achieve directional control of emission for scintillators. For BGO (Bi4Ge3O12) scintillator covered with PMMA (polymethyl-methacrylate) hemispherical microlens array, the 2.59-fold in particular angle (θem = 45°) and overall 1.94-fold angle-integrated enhancement ratios have been obtained. Furthermore, we analyze and optimize some parameters of microlens arrays such as the packing arrangement, duty ratio, size, refractive index, and shape. As a result, when the refractive index of microlens is slightly larger than that of scintillator, a maximum 6.23-fold angle-integrated enhancements can be achieved. It can be concluded that the microlens array covered on scintillator has considerable value for practical applications on radiation detection.
RESUMO
Under excitation of high-energy and low-flux density of X-ray beam, a 1-µm system spatial resolution was initially achieved by using an 18-µm thickness ZnO nanorod array as the scintillator layer in X-ray imaging beamline at Shanghai Synchrotron Radiation Facility. The decay time measurements indicated the ultraviolet and visible emissions of the arrays were subnanosecond and nanosecond, respectively. Through hydrogen annealing treatment, the ultraviolet luminescence was intensively enhanced and the visible luminescence was remarkably suppressed simultaneously. In conclusion, it can be determined that the ZnO-based nanorod arrays are the decent candidates for applications in ultrafast and high-spatial-resolution X-ray imaging systems.
RESUMO
It is intuitively expected that an enhanced light extraction of a scintillator can be easily achieved by photonic crystal structures. Here, we demonstrate a modified timing characteristic for a detection system induced by enhanced light extraction with photonic crystal structures. Such improvement is due to the enhanced light extraction which can be clearly proven by the independent measurements of the light output and the timing resolution. The present investigation is advantageous to promote the development of a scintillation detection system performance based on the time-of-flight measurement.
RESUMO
Thin-film luminescent layers as wavelength shifters using in the scintillation detection system suffer with low efficiency due to the total internal reflection and the non-directional emission. In the present work, we design and fabricate a photonic crystal on the surface of LuTaO(4):Eu(3+) thin-film which is a newly developed luminescent material using in radiation detection systems. The entire structure shows guided-mode resonances with only one TE and TM mode. As a result, the emitting light is effectively extracted. Furthermore, due to only two modes existing in the layer, the directionality of emission is strongly controlled. This result enables the structured LuTaO(4):Eu(3+) thin-film to be a potential wavelength shifter with high-efficiency.
RESUMO
Objective To summarize the positive signs on multi-detector CT angiography (CTA) for active severe gastrointestinal bleeding (GIB).Methods We retrospectively evaluated the clinical records and CT images of 93 patients with active severe GIB confirmed by digital subtraction angiography (DSA),endoscopy or surgery. The positive CT signs indicating the locations and causes of the bleeding were recorded. Results Intraluminal extravasation of contrast material was identified in 44 cases (47.3%),vascular malformation was found in 22 cases (23.7%),gastrointestinal tumor was detected in 18 cases (19.4%),focal or segmental abnormal bowel mucosal enhancement was present in 7 cases (7.5%),and diverticulum with abnormal enhancement was found in 2 cases (2.2%). Conclusion Positive signs for active severe GIB on CT are diverse and thus should be carefully interpreted in clinical setting.