Combined transcriptomic and pangenomic analyses guide metabolic amelioration to enhance tiancimycins production.

Exploration of high-yield mechanism is important for further titer improvement of valuable antibiotics, but how to achieve this goal is challenging. Tiancimycins (TNMs) are anthraquinone-fused enediynes with promising drug development potentials, but their prospective applications are limited by low titers. This work aimed to explore the intrinsic high-yield mechanism in previously obtained TNMs high-producing strain Streptomyces sp. CB03234-S for the further titer amelioration of TNMs. First, the typical ribosomal RpsL(K43N) mutation in CB03234-S was validated to be merely responsible for the streptomycin resistance but not the titer improvement of TNMs. Subsequently, the combined transcriptomic, pan-genomic and KEGG analyses revealed that the significant changes in the carbon and amino acid metabolisms could reinforce the metabolic fluxes of key CoA precursors, and thus prompted the overproduction of TNMs in CB03234-S. Moreover, fatty acid metabolism was considered to exert adverse effects on the biosynthesis of TNMs by shunting and reducing the accumulation of CoA precursors. Therefore, different combinations of relevant genes were respectively overexpressed in CB03234-S to strengthen fatty acid degradation. The resulting mutants all showed the enhanced production of TNMs. Among them, the overexpression of fadD, a key gene responsible for the first step of fatty acid degradation, achieved the highest 21.7 ± 1.1 mg/L TNMs with a 63.2% titer improvement. Our studies suggested that comprehensive bioinformatic analyses are effective to explore metabolic changes and guide rational metabolic reconstitution for further titer improvement of target products. KEY POINTS: • Comprehensive bioinformatic analyses effectively reveal primary metabolic changes. • Primary metabolic changes cause precursor enrichment to enhance TNMs production. • Strengthening of fatty acid degradation further improves the titer of TNMs.

Alcoholamine enhanced fractionation of cellulose from lignocellulosic biomass in ionic liquids.

Ionic liquid based technology is promising in the pretreatment of lignocelluloses. More efforts are still being made to intensify the separation of the main components in this biomass and to inhibit biopolymer degradation, especially in the fabrication of functional materials where excellent mechanical properties are often requisite. In this study, additives with amino and/or hydroxyl groups were proposed to improve the dissolution of lignocellulosic biomass in ionic liquids and to inhibit the degradation of cellulose. Among the tested additives (i.e., urea, L-2-aminobutyric acid, DL-aminopropanol, 3-aminopropanol and ethanolamine), 3-aminopropanol showed the best performance in enhancing wheat straw dissolution and cellulose recovery in 1-ethyl-3-methylimidazolium acetate ([EMIM]Ac). Further study revealed that this additive could also inhibit cellulose degradation in [EMIM]Ac. The interactions between the ionic liquid and additive were revealed by NMR and IR analysis. It was found that the formation of hydrogen bonds between 3-aminopropanol and [EMIM]Ac changed the interactions between ionic liquids and biomass, resulting in improved dissolution efficiency and inhibition of cellulose degradation. Optimization investigation showed that when using the 3-aminopropanol/[EMIM]Ac composite system as the solvent and pine as the raw biomass, the cellulose content in the recovered cellulose-rich material was increased from 33.3% (for the raw pine) to 66.9%. Correspondingly, the regenerated cellulose spinning in the composite system exhibited improved mechanical properties, with the elongation at break reaching 15.6% and the tensile fracture strength of 184.1 N per tex (in comparison with 9.6% for elongation at break and 99.7 N per tex for tensile fracture strength for the sample obtained in neat [EMIM]Ac).

Fabrication of highly crystalline covalent organic framework for solid-phase extraction of three dyes from food and water samples.

Herein, a covalent organic framework, which was fabricated at room temperature by using 1,3,5-tris(p-formylphenyl) benzene and 1,3,5-tris(4-aminophenyl)benzene as building blocks, was employed as an adsorbent for solid-phase extraction of dyes including congo red, methyl blue and direct red 80 for the first time. The prepared covalent organic framework was properly characterized by different techniques and the results revealed that it had a uniform spherical structure, high crystallinity, satisfactory surface area, and good thermal stability. Moreover, the adsorption performance of the material was explored by using static and dynamic adsorption experiments and the results indicated that the material showed good adsorption capacities for three dyes with adsorption capacities in the range of 55.25-284.10 mg/g and the adsorption equilibrium can be achieved in 15 min. Further, to achieve the best adsorption effects of the material, the influence parameters such as pH, ionic strength, type of desorption solvent, and the material dosage in the solid-phase extraction column, were optimized in turn. Finally, under optimal conditions, the solid-phase extraction coupled with HPLC was applied to the analysis of dyes in food and water samples. The recoveries of dyes in actual samples were satisfactory, revealing the unique applicability of the material in the sample pretreatment field.

Nonlinear behavior in preparative liquid chromatography: A method-development case study for hydroxytyrosol purification.

Preparative liquid chromatography has become an important purification method owing to its advantages of high separation efficiency, good reproducibility, and low solvent consumption. Because overloading in preparative liquid chromatography must be performed to increase the throughput in a cycle, nonlinear chromatographic behavior is observed. Therefore, it is crucial to carefully study nonlinear chromatography for the purification of a given product, which facilitates the efficient optimization of the purification parameters. In this work, a method for the development of a purification method using preparative liquid chromatography based on nonlinear chromatography is proposed. Hydroxytyrosol was selected as the subject for method demonstration. Using methanol and ethanol as organic modifiers, the optimum flow rate was determined on three commercial columns entitled C8 TDE, C18 ME, and C18 TDE, respectively. The curves were fitted with the van Deemter equation, with thorough analysis of the A, B, and C terms. Adsorption isotherms were subsequently studied to explore the distribution of solutes between the stationary and mobile phases at equilibrium. C18 TDE, 5 vol% ethanol-water, and 0.2 mL/min were selected as the optimal separation material, elution solvent, and flow rate, respectively. Purification of hydroxytyrosol was tentatively confirmed on a C18 TDE column with 1.6% sample loading, 90.98% recovery, and 98.01% purity.

Nanoscale Hierarchically Micro- and Mesoporous Metal-Organic Frameworks for High-Resolution and High-Efficiency Capillary Electrochromatographic Separation.

Metal-organic frameworks (MOFs) have been widely applied in a variety of fields. However, most of the developed MOFs are micrometer scale in crystal size and contain only micropores, which will limit the mass transport and diffusion of various analytes into their internal interaction sites, severely restricting the potential of MOFs in separation science. Herein, nanoscale hierarchically porous MOFs (NHP-MOFs) were first explored as a novel MOF-based stationary phase with excellent mass transfer performance and abundant accessible interaction sites for high-performance chromatographic separation. As a proof-of-concept demonstration, the nanoscale hierarchically micro- and mesoporous UiO-66 (NHP-UiO-66) was firmly immobilized on the capillary inner surface and utilized as the porous stationary phase for high-resolution and high-efficiency electrochromatographic separation. A wide range of low-, medium-, and high-molecular-weight analytes, including substituted benzenes, chlorobenzenes, polycyclic aromatic hydrocarbons, nucleosides, polypeptides, and proteins were all separated well on a NHP-UiO-66-coated column with excellent resolution and repeatability, exhibiting significantly improved column efficiency and separation ability compared to those of a microporous UiO-66-modified column. The maximum column efficiencies for all the six kinds of analytes reached up to 1.2 × 105 plates/m, and the relative standard deviations of the migration times of substituted benzenes for intraday, interday, and column-to-column were all lower than 5.8%. These results reveal that NHP-MOFs can effectively combine the advantages of the high specific surface area of microporous MOFs and the excellent mass transfer performance and abundant accessible interaction sites of NHP materials, possessing great prospect for high-performance chromatographic separation.

Preparation and evaluation of a molybdenum disulfide quantum dots embedded C18 mixed-mode chromatographic stationary phase.

Molybdenum disulfide quantum dots (MoS2 QDs) were chosen as a functional two-dimensional material to improve the separation performance of a traditional C18 column. In this work, MoS2 QDs were synthesized by the combination of sonication and solvothermal treatment of bulk MoS2. The prepared MoS2 QDs were characterized by transmission electron microscope (TEM), Zeta potential measurement, UV-visible absorption and fluorescence spectroscopy. Then, a novel MoS2 QDs embedded C18 (Sil-MoS2-C18) stationary phase was prepared for performing mixed-mode liquid chromatography. The results of elemental analysis (EA), thermogravimetric analysis (TGA), Fourier transform infrared spectrometry (FT-IR), X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM) and Brunauer-Emmett-Teller (BET) measurements indicated the stationary phase was prepared successfully. Five types of compounds including alkylbenzenes, polycyclic aromatic hydrocarbons (PAHs), nucleosides and nucleobases, anilines and flavonoids were utilized to evaluate reversed phase, weak cation exchange and hydrophilic interaction of the new column. To a certain extent, the column could achieve separation for different properties of samples on one column, with less organic solvent and shorter time than conventional alkyl and amino columns. Furthermore, the mechanism for separation was studied by investigating effects of mobile phase composition and pH on retentions. In summary, the Sil-MoS2-C18 stationary phase was deemed able to serve the performance of various types of phases, which revealed the prepared mixed-mode column could be potentially applied for the analysis of complex samples. Graphical abstract.

Green synthesis of carbon dots using the flowers of Osmanthus fragrans (Thunb.) Lour. as precursors: application in Fe3+ and ascorbic acid determination and cell imaging.

In this work, dried flowers of Osmanthus fragrans Lour. were applied as green precursors to synthesize carbon dots (CDs) by a green hydrothermal method for the first time. The CDs showed strong blue fluorescence at 410 nm under 340-nm excitation with a quantum yield of approximately 18.53%. Furthermore, the CDs were applied for the sensitive detection of Fe3+. The linear response of Fe3+ ranged from 10 nM to 50 µM with a limit of detection as low as 5 nM. In addition, other ions were used as competitive substances to explore the selectivity of CDs for Fe3+. The fluorescence quenching effect of Fe3+ was much stronger, which demonstrated that the CDs had high selectivity for Fe3+ and they can be employed for the selective detection of Fe3+. The potential fluorescence quenching mechanism between CDs and Fe3+ was identified as the inner filter effect. The CDs were then used as a fluorescent sensor for the detection of Fe3+ in water samples and human serum; the recovery range was 93.76-113.80% (relative standard deviation less than 0.79%). These results indicate that the CDs can be applied for the sensitive and selective detection of Fe3+ in real samples. Moreover, on the basis of the redox reaction between Fe3+ and ascorbic acid (AA), the CD-Fe3+ system can be used as a fluorescent "off-on" sensor for the detection of AA with a limit of detection of 5 µM. What is more, because of their low toxicity and biocompatibility, the CDs can also be used for cell imaging and acted as a fluorescent probe for fluorescence imaging of Fe3+ and AA in living cells. These results demonstrate that the CDs have great potential for application in the fields of sensing, bioimaging, and even disease diagnosis.

Discovery of gas vesicles in Streptomyces sp. CB03234-S and potential effects of gas vesicle gene overexpression on morphological and metabolic changes in streptomycetes.

Gas vesicles are usually found in aquatic microbes to help against adverse growth conditions and also present applied potentials in various biotechnological areas. Although gvp genes encoding gas vesicle proteins are occurred in many bacteria, the formation of gas vesicles in streptomycetes has not been reported yet. During the transcriptome analysis of Streptomyces sp. CB03234-S, a high producer of 10-membered enediynes tiancimycins (TNMs) generated in our previous studies, the notable activation of a gvp gene cluster (gvp3234) was detected, which may be related to the morphological change and yield increase in CB03234-S. Subsequent bioinformatic analysis revealed that gvp3234 possessed some unique features different from other gvp gene clusters, and its relative expression level was much higher than homologues in Streptomyces coelicolor. The overexpression of gvp3234 further improved the total titer of TNM-A and TNM-D from 12.3 ± 0.1 mg/L up to 21.4 ± 0.8 mg/L in CB03234-S, and TEM analysis clearly showed the emergence of gas vesicles, while the heterologous expression of gvp3234 in Streptomyces sp. CB09001 also resulted in the similar formation of fluffy mycelial pellets with long hyphae like in CB03234-S and enhanced the production of xanthone derivative. Our work reported a functionally expressed gvp gene cluster and the corresponding formation of gas vesicles in streptomycetes for the first time. The revealed potential effects of gas vesicles on morphological and metabolic changes shall provide an alternative strategy for strain improvement of industrial streptomycetes to obtain better performances in liquid cultivation and enhance production of secondary metabolites.

Extraction and determination of bioactive flavonoids from Abelmoschus manihot (Linn.) Medicus flowers using deep eutectic solvents coupled with high-performance liquid chromatography.

A highly efficient and ecofriendly extraction method using deep eutectic solvents was developed to extract bioactive flavonoids from Abelmoschus manihot (Linn.) Medicus flowers. First, a series of deep eutectic solvents using choline chloride as hydrogen bond acceptor with different hydrogen bond donors was successfully synthesized. Then, the types of deep eutectic solvents and the extraction conditions for bioactive flavonoids (hyperoside, isoquercitrin, and myricetin) were optimized based on the flavonoids extraction efficiencies. The optimized deep eutectic solvent for hyperoside and isoquercitrin extraction was composed of choline chloride and acetic acid with a molar ratio of 1:2. The optimized deep eutectic solvent for myricetin extraction was composed of one mole of choline chloride and two moles of methacrylic acid. The optimal extraction conditions were set as: solid to solvent ratio, 35:1 (mg/mL); extraction time, 30 min; extraction temperature, 30°C. Qualitative and quantitative analysis were performed using ultra high performance liquid chromatography with tandem mass spectrometry and high-performance liquid chromatography. And the extraction efficiencies of hyperoside, isoquercitrin, and myricetin under optimal extraction conditions were calculated as 11.57, 5.64, and 1.11 mg/g, much higher than those extracted by traditional extraction solvents. Therefore, the prepared deep eutectic solvents can be selected as alternative solvent to extract bioactive flavonoids.

Magnetic covalent organic frameworks with core-shell structure as sorbents for solid phase extraction of fluoroquinolones, and their quantitation by HPLC.

A core-shell structured magnetic covalent organic frameworks of the type Fe3O4@COFs was prepared by using the Fe3O4 nanoparticles as magnetic core, and 4,4"-diamino-p-terphenyl and 1,3,5-tris(p-formylphenyl)benzene as two building blocks. The Fe3O4@COFs were characterized by scanning electron microscopy, transmission electron microscopy, energy dispersive spectrum, Fourier transform infrared spectroscopy, zeta potentiometric analysis, X-ray diffraction, vibrating sample magnetometry, thermogravimetric analysis and the nitrogen adsorption-desorption isotherms. The Fe3O4@COFs have core-shell structure with average diameter of 200 ± 2.4 nm, a high specific surface area (124 m2·g-1), uniform pore size distribution (3.1 nm), good magnetic responsivity (36.8 emu·g-1), good thermal and chemical stability. They were applied as the sorbents for magnetic solid phase extraction (MSPE) for fluoroquinolones (FQs) ciprofloxacin, enrofloxacin, lomefloxacin, gatifloxacin, levofloxacin and pefloxacin. The effects of sorbent dosage, extraction time, p H value, ionic strength, desorption solvent and desorption time were investigated. By combining MSPE with HPLC-DAD analysis, a rapid and sensitive method was developed for the enrichment and determination of these FQs. The method had good linearity in the range of 2.5-1500 ng·g-1 FQ concentration range and low limits of detection (0.25-0.5 ng·g-1). The method was successfully applied to the extraction and determination of FQs in (spiked) pork, milk and human plasma samples. Recoveries ranged from 78.7-103.5% (with RSD<6.2%). Graphical abstract Schematic representation of the magnetic covalent organic frameworks which prepared by using the Fe3O4 nanoparticles as magnetic core, 4,4"-diamino-p-terphenyl and 1,3,5-tris(p-formylphenyl)benzene as two building blocks. The Fe3O4@COFs were applied as adsorbents for magnetic solid phase extraction of six fluoroquinolones (FQs) and HPLC-DAD was applied to analysis the extraction efficiencies.

A magnetic and carbon dot based molecularly imprinted composite for fluorometric detection of 2,4,6-trinitrophenol.

A magnetic molecularly imprinted composite was prepared by reverse microemulsion using carbon dots (CDs), Fe3O4 as the co-nucleus, and a molecularly imprinted polymer (MIP; with 2,4,6-trinitrophenol as the template) acting as recognition sites. The composite of type CD/Fe3O4@MIPs was characterized by transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS), Fourier transform infrared spectroscopy (FT-IR), zeta potentiometric analysis, X-ray diffraction (XRD) and vibrating sample magnetometry (VSM). The results showed that the composite MIP has a spherical shape with average diameter of 200 nm. They also showed that the composite contains core-shell structures with several Fe3O4 nanoparticles and CDs embedded in each of the microsphere. The composite can extract 2,4,6-trinitrophenol (TNP) and has an imprinting factor of 3.6. It has high selectivity and sensitivity for TNP which acts as a quencher of the fluorescence of the CDs (with excitation/emission maxima at 370/470 nm). The limit of detection of this fluorometric TNP assay is 0.5 nM. The method was successfully applied to the determination of TNP in spiked tap water and river water samples, and recoveries ranged from 89.4% to 108.5% (with an RSD of <6%). Graphical abstract Schematic representation of the magnetic molecularly imprinted composite containing fluorescent carbon dots, Fe3O4 and molecularly imprinted polymer (CD/Fe3O4@MIPs). The CD/Fe3O4@MIPs were applied to the selective and sensitive detection of 2,4,6-trinitrophenol (TNP) by fluorometry.

Comparing coagulation activity of Selaginella tamariscina before and after stir-frying process and determining the possible active constituents based on compositional variation.

CONTEXT: Selaginella tamariscina (P. Beauv.) Spring (Selaginellaceae) (ST) has been widely used in China as a medicine for improving blood circulation. However, its processed product, S. tamariscina carbonisatus (STC), possesses opposite haemostatic activity. OBJECTIVE: To comprehensively evaluate the activity of ST and STC on physiological coagulation system of rats, and seek potential active substances accounting for the activity transformation of ST during processing. MATERIALS AND METHODS: The 75% methanol extracts of the whole grass (fine powder) of ST and STC were prepared, respectively. Male Sprague-Dawley rats were randomly divided into five groups: control group, model group, model + ST group, model + STC group and positive control group (model + Yunnanbaiyao). The duration of intragastric administration was 72 h at 12 h intervals. Haemorheology parameters were measured using an LB-2 A cone-plate viscometer and the existed classic methods, respectively. SC40 semi-automatic coagulation analyzer was employed to determine coagulation indices. Meanwhile, HPLC and LC-MS were applied for chemical analyses of ST and STC extracts. RESULTS: STC shortened tail-bleeding time, increased whole blood viscosity (WBV) and plasma viscosity (PV), decreased erythrocyte sedimentation rate blood (ESR), reduced activated partial thromboplastin time (APTT) and increased the fibrinogen (FIB) content in the plasma of bleeding model rats. Although ST could shorten APTT and TT, the FIB content was significantly decreased by ST. Dihydrocaffeic acid with increased content in STC vs. ST showed haemostatic activity for promoting the platelet aggregation induced by collagen and trap-6, and reducing APTT and PT significantly with a concentration of 171.7 µM in vitro. Amentoflavone with reduced content in STC vs. ST inhibited ADP and AA-induced platelet aggregation significantly with a concentration of 40.7 µM. DISCUSSION AND CONCLUSIONS: As the processed product of ST, STC showed strong haemostatic activity on bleeding rat through regulating the parameters involved in haemorheology and plasma coagulation system. Two active compounds, dihydrocaffeic acid and amentoflavone, might be partially responsible for the haemostatic and anticoagulant activity of STC and ST, respectively.

Molecularly imprinted polymers for the selective extraction of tiliroside from the flowers of Edgeworthia gardneri (wall.) Meisn.

Nano-sized molecularly imprinted polymers for tiliroside were successfully prepared by a precipitation polymerization method. Acrylamide, ethylene glycol dimethacrylate, azobisisobutyronitrile, and acetonitrile/dimethyl sulfoxide were used as functional monomer, cross-linker, initiator, and porogen, respectively. The structural features and morphological characterization of tiliroside-imprinted polymers were characterized by Fourier transform infrared spectroscopy and scanning electron microscopy, respectively. The adsorption experiments indicated that the tiliroside-imprinted polymers exhibited high selective recognition property to tiliroside. Scatchard analysis indicated that the homogeneous-binding sites were formed in the polymers. The selectivity test revealed that the adsorption capacity and selectivity of polymers to tiliroside was significantly higher than that of rutin, astragalin, and kaempferol. Finally, the tiliroside-imprinted polymers were employed as adsorbents in solid-phase extraction for the extraction of tiliroside from the ethyl acetate extract of the flowers of Edgeworthia gardneri (wall.) Meisn. The results demonstrated that the extraction recoveries of tiliroside ranged from 69.3 to 73.5% by using tiliroside-imprinted polymers coupled with solid-phase extraction method. These results indicated that the tiliroside-based molecularly imprinted solid-phase extraction method was proven to be an effective technique for the separation and enrichment of tiliroside from natural medicines.

Molecularly imprinted polymer for the selective extraction of luteolin from Chrysanthemum morifolium Ramat.

In this work, luteolin-imprinted polymers were prepared by noncovalent precipitation polymerization for the first time. Their structural features and morphologies were analyzed by using Fourier transform infrared spectroscopy and scanning electron microscopy, respectively. The adsorption experiments revealed that the luteolin-imprinted polymers presented high selective recognition property to luteolin. The selectivity experiment showed that the adsorption capacity and selectivity of polymers to luteolin was higher than that of three structural analogs, including quercetin, isorhamnetin, and ombuin. Furthermore, an efficient method based on luteolin-imprinted polymers coupled with solid-phase extraction was developed for the pretreatment of luteolin from Chrysanthemum morifolium Ramat. The results demonstrated that the luteolin-imprinted polymers coupled with solid phase extraction method was proven to be a potentially competitive technique for the separation and enrichment of luteolin in complex samples such as Chinese patent medicines and biological samples.

MXene/ZnS/chitosan-cellulose composite with Schottky heterostructure for efficient removal of anionic dyes by synergistic effect of adsorption and photocatalytic degradation.

Nowadays, dye water pollution is becoming increasingly severe. Composite of MXene, ZnS, and chitosan-cellulose material (MX/ZnS/CC) was developed to remove anionic dyes through the synergistic effect of adsorption and photocatalytic degradation. MXene was introduced as the cocatalyst to form Schottky heterostructure with ZnS for improving the separation efficiency of photocarriers and photocatalytic performance. Chitosan-cellulose material mainly served as the dye adsorbent, while also could improve material stability and assist in generation of free radicals for dye degradation. The physics and chemistry properties of MX/ZnS/CC composite were systematically inspected through various characterizations. MX/ZnS/CC composite exhibited good adsorption ability to anionic dyes with adsorption capacity up to 1.29 g/g, and excellent synergistic effects of adsorption and photodegradation with synergistic removal capacity up to 5.63 g/g. MX/ZnS/CC composite performed higher synergistic removal ability and better optical and electrical properties than pure MXene, ZnS, chitosan-cellulose material, and MXene/ZnS. After compounding, the synergistic removal percentage of dyes increased by a maximum of 309 %. MX/ZnS/CC composite mainly adsorbs anionic dyes through electrostatic interactions and catalyzes the generation of •O2-, h+, and •OH to degrade dyes, which has been successfully used to remove anionic dyes from environmental water, achieving a 100 % removal of 50 mg/L dye.

Chitosan-alginate sponge with multiple cross-linking networks for adsorption of anionic dyes: Preparation, property evaluation, mechanism exploration, and application.

A chitosan-alginate sponge (CAS) with multiple cross-linking networks was developed using chitosan, sodium alginate, polyvinyl alcohol, and glutaraldehyde to adsorb and enrich the anionic dyes form the food samples. The multiple networks in CAS refer to the electrostatic cross-linking network, hydrogen bonding cross-linking network, and covalent cross-linking network. Compared with pure chitosan and alginate sponges, the CAS showed better three-dimensional network structure, mechanical behavior, and stability, which is benefit by multiple cross-linking networks. The physical and chemical properties of CAS were systematically studied by a series of characterizations. The adsorption performance of CAS on anionic dyes was inspected with different dye concentration, time, temperature, and pH conditions. CAS exhibited a good and stable adsorption property to amaranth, carmine, and sunset yellow with the saturation adsorption capacity of 94.34, 111.5, and 80.05 mg∙g-1, respectively. Furthermore, CAS performed outstanding selectivity to anionic dyes with the selectivity factor up to 16.99. Through electrostatic potential analysis, it is inferred that CAS mainly adsorbs anionic dyes through electrostatic interactions. CAS showed satisfactory reusability, maintaining 97 %-99 % of adsorption performance after six cycles of recycling. Finally, CAS was combined with high-performance liquid chromatography for the enrichment and detection of anionic dyes in candy and cocktail samples, achieving the enrichment factor up to 84.77.

Magnetic molecular imprinted covalent organic framework composite for the magnetic solid-phase extraction of bisphenol AF.

A magnetic molecular imprinted covalent organic framework composite (MCOF-MIP) that possessed the 'dual-selectivity' of a covalent organic framework and molecular imprinted polymer (MIP) with rapid response performance was successfully prepared for the removal of bisphenol AF (BPAF) from real water and blood samples. First, the MCOF was separately synthesized using magnetic Fe3O4 as the magnetic core, 1,3,5-triaminobenzene and 2,5-dibromobenzene-1,4-diformaldehyde as precursors and a deep eutectic solvent (DES) as the solvent using a solvothermal synthesis method. The MCOF showed high crystallinity and good adsorption capacities for BPAF (107.4 mg g-1), bisphenol A (113.6 mg g-1), bisphenol S (120.0 mg g-1) and bisphenol F (82.1 mg g-1). To further improve the selectivity for BPAF, an MIP, which uses BPAF as a template, was introduced to form the MCOF-MIP. Due to the dual selectivity of MCOF and MIP, the MCOF-MIP exhibited relatively high selective adsorption capacity to BPAF (243.1 mg g-1) compared to that for the MCOF (107.4 mg g-1), while the adsorption capacities (149.7-109.4 mg g-1) for the other three compounds were not significantly improved. Furthermore, a magnetic solid-phase extraction (MSPE) method was established, and MSPE parameters such as adsorbent dosage, adsorption time, desorption solvent and desorption time were optimized. Combined with high-performance liquid chromatography with diode-array detection (HPLC-DAD) analysis, a rapid and sensitive method was developed to detect BPAF, which showed good linearity (r > 0.9969) ranging from 0.1 to 400 µg mL-1. Low limits of detection (0.04 µg mL-1, S/N = 3) and quantitation (0.1 µg mL-1, S/N = 10) and good precision with low relative SDs (<1.2 % for intra-day and <1.1 % for inter-day) were also obtained. Finally, MSPE coupled with HPLC-DAD was employed for the analysis of BPAF in water and blood samples, and the recoveries of BPAF were satisfactory (91.1-112.6 %).

Sulfuric acid induced-synthesis coupled with ethanol extraction-water precipitation purification method for orange fluorescent carbon dots with dual-emission: Application for methyl blue detection and cell imaging.

In this work, by adjusting the sulfuric acid content in reaction solvent of ethanol, orange fluorescent carbon dots (O-FCDs) with dual-emission wavelength and blue fluorescent carbon dots (B-FCDs) with single-emission wavelength were successfully prepared using 1,3-dihydroxynaphthalene as precursor. Coupling with ethanol extraction-water precipitation purification method, pure O-FCDs and B-FCDs with yields of 9.0 % and 21.3 %, quantum yields (QYs) of 43.0 % and 13.7 % were obtained, respectively. The structures and optical properties of O-FCDs and B-FCDs were investigated by TEM, AFM, Raman, FT-IR, XPS, UV-vis, fluorescence analysis etc. The results revealed that sulfuric acid promoted the carbonization and the oxidation of precursor in the reaction process. In comparison with the B-FCDs, O-FCDs showed narrower lattice spacing and band gap, demonstrating the important role of sulfur-doping in fluorescence tuning. Additionally, O-FCDs showed good sensitivity for methyl blue with a linear response range of 0.05-100 µM (LOD was 20 nM) and the satisfactory results were obtained when O-FCDs were applied to the detection of methyl blue in real fish sample. Moreover, two FCDs showed good biocompatibility and negligible cytotoxicity proved by MTT experiment, while, O-FCDs showed better cell imaging effects than that of B-FCDs. Therefore, the O-FCDs had a broad application prospect as sensing platform in detection of methyl blue and for imaging in biological field.

ZnS/CuFe2O4/MXene ternary heterostructure photocatalyst for efficient adsorption and photocatalytic degradation of azo dyes under visible light: Synergistic effect, mechanism, and application.

ZnS/CuFe2O4/MXene (ZSCFOM) composite with ternary heterostructures was prepared by solvothermal methods for the first time to effectively adsorb and photodegrade the azo dyes. ZSCFOM mainly adsorbed azo dyes through the hydrogen bonding and electrostatic interactions, with saturated adsorption capacities of 377 mg g-1 for direct brown M and 390 mg g-1 for direct black RN. ZSCFOM exhibited both characteristics of Schott heterostructure and p-n heterostructure, but it is not a simple superposition of the two heterostructures, but rather achieves better photocatalytic property. ZSCFOM performed a higher separation efficiency of electrons and holes than pure CuFe2O4 and pure ZnS. Under visible light, ZSCFOM was more effective in removing the azo dyes than MXene, CuFe2O4, ZnS, CuFe2O4/MXene, ZnS/MXene, and ZnS/CuFe2O4. The migration pathways of photogenerated carriers in ZSCFOM were inferred as that the electrons were concentrated in MXene and conduction band of ZnS, and holes were gathered in valence band of CuFe2O4. MXene served as a cocatalyst to accelerate the separation of electrons and holes. ZSCFOM mainly degraded DBM and DBRN by catalyzing the generation of holes, superoxide radicals, and hydroxyl radicals. The 100% of 0.05 g L-1 azo dyes were removed by ZSCFOM within 30 min from the environmental water systems.

Fluorescent covalent organic frameworks for environmental pollutant detection sensors and enrichment sorbents: a mini-review.

Covalent organic frameworks (COFs) are a class of porous crystalline materials based on organic building blocks containing light elements, such as C, H, O, N, and B, interconnected by covalent bonds. Because of their regular crystal structure, high porosity, stable mechanical structure, satisfactory specific surface area, easy functionalization, and high tunability, they have important applications in several fields. Currently, most of the established methods based on COFs can only be used for individual detection or adsorption of the target. Impressively, fluorescent COFs as a special member of the COF family are able to achieve highly selective and sensitive detection of target pollutants by fluorescence enhancement or quenching. The construction of a dual-functional platform for detection and adsorption based on fluorescent COFs can enable the simultaneous realization of visual monitoring and adsorption of target pollutants. Therefore, this paper reviews the research progress of fluorescent COFs as fluorescence sensors and adsorbents. First, the fluorescent COFs were classified according to the different bonding modes between the building blocks, and then the applications of fluorescent COF-based detection and adsorption bifunctional materials for various environmental contaminants were highlighted. Finally, the challenges and future application prospects of fluorescent COFs are discussed.