RESUMO
Stable aluminosilicate zeolites with extra-large pores that are open through rings of more than 12 tetrahedra could be used to process molecules larger than those currently manageable in zeolite materials. However, until very recently1-3, they proved elusive. In analogy to the interlayer expansion of layered zeolite precursors4,5, we report a strategy that yields thermally and hydrothermally stable silicates by expansion of a one-dimensional silicate chain with an intercalated silylating agent that separates and connects the chains. As a result, zeolites with extra-large pores delimited by 20, 16 and 16 Si tetrahedra along the three crystallographic directions are obtained. The as-made interchain-expanded zeolite contains dangling Si-CH3 groups that, by calcination, connect to each other, resulting in a true, fully connected (except possible defects) three-dimensional zeolite framework with a very low density. Additionally, it features triple four-ring units not seen before in any type of zeolite. The silicate expansion-condensation approach we report may be amenable to further extra-large-pore zeolite formation. Ti can be introduced in this zeolite, leading to a catalyst that is active in liquid-phase alkene oxidations involving bulky molecules, which shows promise in the industrially relevant clean production of propylene oxide using cumene hydroperoxide as an oxidant.
RESUMO
For zeolites synthesized using imidazolium cations, the organic matter can be extracted at very low temperatures (100 °C) using ozone. This is possible for zeolites with 12-ring or larger pores but requires higher temperatures in medium-pore zeolites. The first chemical events in this process occur fast, even at room temperature, and imply the loss of aromaticity likely by the formation of an adduct between ozone and the imidazole ring through carbons C4 and C5. Subsequent rupture of the imidazole ring provides smaller and more flexible fragments that can desorb more readily. This process has been studied experimentally, mainly through infrared spectroscopy, and theoretically by density functional theory. Amazingly, fluoride anions occluded in the small double-four-ring units (d4r) during the synthesis remain inside the cage throughout the whole process when the temperature is not too high (≤150 °C). However, fluoride in larger cages in MFI ends up bonded to silicon in penta or hexacoordinated units, likely out of the cages, after ozone treatment at 150 °C. For several germanosilicate zeolites, the process allows their subsequent degermanation to yield stable high-silica zeolites. Quaternary ammonium cations require harsher conditions that eventually also extract fluoride from zeolite cages, including the d4r unit.
RESUMO
Zeolites are microporous crystalline materials that find a very wide range of applications, which, however, are limited by the size and dimensionality of their pores. Stable silica zeolites with a three-dimensional (3D) system of extra-large pores (ELP, i.e., pores with minimum windows along the diffusion path consisting of more than 12 SiO4/2 tetrahedra, 12R) are in demand for processing larger molecules than zeolites can currently handle. However, they have challenged worldwide synthetic capabilities for more than eight decades. In this review we first present a brief history of the discovery of ELP zeolites. Next, we show that earlier successes of zeolites with 3D ELP were not actually zeolites, but rather interrupted structures with, in addition, a composition that severely detracted from their stability. Finally, we present three new fully connected stable silica-based 3D ELP zeolites ZEO-1, ZEO-3 and ZEO-5, discuss their preparation methods and stability as well as the clear advantage of their increased porosity in catalysis and adsorption processes involving large molecules. We will discuss peculiar characteristics of their preparation and present two new reaction types giving rise to zeolites (1D-to-3D topotactic condensation and interchain expansion), highlighting how new synthesis methods can provide materials that would otherwise be unfeasible.
RESUMO
One common strategy in the search for new zeolites is the use of organic structure-directing agents (OSDA). Typically, one seeks to achieve a high specificity in the structure-directing effect of the OSDA. This study shows, however, that an OSDA lacking strong specificity towards any particular zeolite may provide opportunities for discovery when other synthesis parameters are systematically screened. Thus, 1-methyl-2-ethyl-3-n-propylimidazolium has allowed to crystallize the new large/medium pore zeolite HPM-16 as well as the recently reported extra-large pore -SYT and the medium/small pore and chiral STW. The sophisticated OSDA originally affording -SYT and the new simple OSDA have very little in common, both in terms of size, shape and flexibility, while both may still direct the synthesis of the same zeolite. In fact, molecular simulations show that the new OSDA is located in three different positions of the -SYT structure, including the discrete 8MR where the original organic could not fit.
RESUMO
HPM-16 is a highly porous germanosilicate zeolite with an interrupted framework that contains a three-dimensional system of 12+10×10(12)×12+10-membered ring (MR) pores. The 10(12)â MR pore in the bâ direction is a 10â MR pore with long 12â MR stretches forming 30â Å long tubular supercages. Along one direction the 10â MR pores are fused, meaning that the separation between adjacent pores consists of a single tetrahedron that is, additionally, connected to only three additional tetrahedra (a Q3 ). These fused pores are thus decorated by T-OH groups along the whole diffusion path, creating a hydrophilic region embedded in an otherwise essentially hydrophobic environment. The structure is built from highly porous 12×12×12â MR uninterrupted layers that are connected to each other through Q3 producing a second system of 10×10×10â MR pores. This zeolite can be extensively degermanated yielding a material with high thermal stability, despite its interrupted nature.
RESUMO
HPM-14 is a new extra-large pore zeolite synthesized using imidazolium-based organic structure-directing agents (SDAs), fluoride anions, and germanium and silicon as tetrahedral components of the framework. Owing to the presence of stacking disorder, the structure elucidation of HPM-14 was challenging, and different techniques were necessary to clarify the details of the structure and to understand the nature of the disorder. The structure has been solved by three-dimensional electron-diffraction technique (3D ED) and consists of an intergrowth of two polymorphs possessing a three-dimensional channel system, including an extra-large pore opened through windows made up of sixteen tetrahedral atoms (16-membered ring, 16MR) as well as two additional sets of odd-membered (9MR) and small (8MR) pores. The intergrowth has been studied by scanning transmission electron microscopy (Cs -STEM) and powder X-ray diffraction simulations (DIFFaX), which show a large predominance of the monoclinic polymorphâ A.
RESUMO
An organic cation lacking specificity in its structure-directing action offers the possibility, through the screening of other structure-directing parameters, to synthesize a variety of zeolites. In this work we show that the organic structure-directing agent 2-isopropyl-1,3-dimethylimidazolium (2iPr13DMI) can produce up to seven different zeolite phases depending on water concentration, the presence of inorganic impurities, crystallization temperature and time, and germanium molar fraction. The obtained phases are very different in terms of pore system, connectivity of the zeolite structure and structural units. At the pure SiO2 side, ZSM-12 and SSZ-35 dominate, with ZSM-12 being favored by the presence of potassium impurities and by less concentrated conditions. The introduction of Ge at low levels favors SSZ-35 over ZSM-12 and as the Ge fraction increases it successively affords CSV, -CLO and two distinct UOS zeolites, HPM-11 and HPM-6. These two zeolites have the same topology but distinct chemical compositions and display powder X-ray diffraction patterns that are much different from each other and from that of as-synthesized IM-16 (UOS reference material). They also show different symmetry at 96 K. Rietveld refinements of the three as-made UOS materials mentioned are provided. HPM-6 and HPM-11 are produced in distinct, non-adjacent crystallization fields. The frequent cocrystallization of the chiral STW zeolite, however, did not afford its synthesis as a pure phase. Molecular mechanics simulations of the location of the organic cation and host-guest interactions fail to explain the observed trends, but also considering the intrinsic stability of the zeolites and the effect of germanium help to rationalize the results. The study is completed by DFT calculations of the NMR chemical shifts of 13C in UOS (helping to understand splittings in the spectrum) and 19F in CSV (supporting the location of fluoride inside the new [4452], which is an incomplete double 4-ring).
RESUMO
Zeolites are microporous silicates with a large variety of applications as catalysts, adsorbents, and cation exchangers. Stable silica-based zeolites with increased porosity are in demand to allow adsorption and processing of large molecules but challenge our synthetic ability. We report a new, highly stable pure silica zeolite called ZEO-3, which has a multidimensional, interconnected system of extra-large pores open through windows made by 16 and 14 silicate tetrahedra, the least dense polymorph of silica known so far. This zeolite was formed by an unprecedented one-dimensional to three-dimensional (1D-to-3D) topotactic condensation of a chain silicate. With a specific surface area of more than 1000 square meters per gram, ZEO-3 showed a high performance for volatile organic compound abatement and recovery compared with other zeolites and metal-organic frameworks.
RESUMO
Zeolites are crystalline porous materials with important industrial applications, including uses in catalytic and adsorption-separation processes. Access into and out of their inner confined space, where adsorption and reactions occur, is limited by their pore apertures. Stable multidimensional zeolites with larger pores able to process larger molecules are in demand in the fine chemical industry and for the oil processing on which the world still relies for fuels. Currently known extra-large-pore zeolites display poor stability and/or lack pore multidimensionality, limiting their usefulness. We report ZEO-1, a robust, fully connected aluminosilicate zeolite with mutually intersecting three-dimensional extra-large plus three-dimensional large pores. ZEO-1 is stable up to 1000°C, has an extraordinary specific surface area (1000 square meters per gram), and shows potential as a catalytic cracking catalyst.
RESUMO
The new zeolite NUD-3 possesses a three-dimensional system of large pore channels that is topologically identical to those of ITQ-21 and PKU-14. However, the three zeolites have distinctly different frameworks: a particular single 4-membered ring inside the denser portion of the zeolite is missing in PKU-14, disordered in ITQ-21 and fully ordered in NUD-3. We document these differences and use molecular simulations to unravel the mechanism by which a particular structure directing agent dication, 1,1'-(1,2-phenylenebis(methylene))bis(3-methylimidazolium), is able to orient this inner ring.