Effect of mPEG-PLGA on Drug Crystallinity and Release of Long-Acting Injection Microspheres: In Vitro and In Vivo Perspectives.

PURPOSE: Traditional progesterone (PRG) injections require long-term administration, leading to poor patient compliance. The emergence of long-acting injectable microspheres extends the release period to several days or even months. However, these microspheres often face challenges such as burst release and incomplete drug release. This study aims to regulate drug release by altering the crystallinity of the drug during the release process from the microspheres. METHODS: This research incorporates methoxy poly(ethylene glycol)-b-poly(lactide-co-glycolide) (mPEG-PLGA) into poly(lactide-co-glycolide) (PLGA) microspheres to enhance their hydrophilicity, thus regulating the release rate and drug morphology during release. This modification aims to address the issues of burst and incomplete release in traditional PLGA microspheres. PRG was used as the model drug. PRG/mPEG-PLGA/PLGA microspheres (PmPPMs) were prepared via an emulsification-solvent evaporation method. Scanning electron microscopy (SEM), powder X-ray diffraction (PXRD), and differential scanning calorimetry (DSC) were employed to investigate the presence of PRG in PmPPMs and its physical state changes during release. RESULTS: The addition of mPEG-PLGA altered the crystallinity of the drug within the microspheres at different release stages. The crystallinity correlated positively with the amount of mPEG-PLGA incorporated; the greater the amount, the faster the drug release from the formulation. The bioavailability and muscular irritation of the long-acting injectable were assessed through pharmacokinetic and muscle irritation studies in Sprague-Dawley (SD) rats. The results indicated that PmPPMs containing mPEG-PLGA achieved low burst release and sustained release over 7 days, with minimal irritation and self-healing within this period. PmPPMs with 5% mPEG-PLGA showed a relative bioavailability (Frel) of 146.88%. IN CONCLUSION: In summary, adding an appropriate amount of mPEG to PLGA microspheres can alter the drug release process and enhance bioavailability.

Human Serum Albumin Nanoparticles as a Carrier of 20(S)-Protopanaxadiol via Intramuscular Injection to Alleviate Cyclophosphamide-Induced Myelosuppression.

Myelosuppression is a prevalent and potentially life-threatening side effect during chemotherapy. As the main active component of ginseng, 20(S)-protopanaxadiol (PPD) is capable of relieving myelosuppression by restoring hematopoiesis and immunity. In this study, PPD was encapsulated in human albumin nanoparticles (PPD-HSA NPs) by nanoparticle albumin-bound (Nab) technology for intramuscular injection to optimize its pharmacokinetic properties and promote recovery of myelosuppression. The prepared PPD-HSA NPs had a particle size of about 280 nm with a narrow size distribution. PPD dispersed as an amorphous state within the PPD-HSA NPs, and the NPs exhibited in vitro sustained release behavior. PPD-HSA NPs showed a favorable pharmacokinetic profile with high absolute bioavailability, probably due to the fact that NPs entered into the blood circulation via lymphatic circulation and were eliminated slowly. In vivo distribution experiments demonstrated that PPD-HSA NPs were mainly distributed in the liver and spleen, but a strong fluorescence signal was also found in the inguinal lymph node, indicating drug absorption via a lymph route. The myelosuppressive model was established using cyclophosphamide as the inducer. Pharmacodynamic studies confirmed that PPD-HSA NPs were effective in promoting the level of white blood cells. Moreover, the neutrophil and lymphocyte counts were significantly higher in the PPD-HSA NPs group compared with the control group. This preliminary investigation revealed that PPD-HSA NPs via intramuscular administration may be an effective intervention strategy to alleviate myelosuppression.

Antibacterial-Anti-Inflammatory-Bone Restoration Procedure Achieved by MIN-Loaded PLGA Microsphere for Efficient Treatment of Periodontitis.

The main development process of periodontitis involves periodontal pathogenic bacteria as the initiating factor causing the onset of destructive inflammation, which in turn stimulates the destruction of periodontal tissue. It is difficult to achieve the eradication of periodontitis due to the complex interaction among antibacterial, anti-inflammatory, and bone restoration. Herein, we propose an antibacterial-anti-inflammatory-bone restoration procedural treatment strategy with minocycline (MIN) for the efficient treatment of periodontitis. In brief, MIN was prepared into PLGA microspheres with tunable release behavior using different species of PLGA, respectively. The optimally selected PLGA microspheres (LA:GA with 50:50, 10 kDa, and carboxyl group) had a drug loading of 16.91%, an in vitro release of approximately 30 days, which also had a particle size of approximately 11.8 µm with a smooth appearance and a rounded morphology. The DSC and XRD results showed that the MIN was completely encapsulated in the microspheres as an amorphous state. Cytotoxicity tests demonstrated the safety and biocompatibility of the microspheres (cell viabilities at a concentration of 1-200 µg/mL were greater than 97%), and in vitro bacterial inhibition tests showed that the selected microspheres could achieve effective bacterial inhibition at the initial stage after administration. The favorable anti-inflammatory (low TNF-α and IL-10 levels) and bone restoration effects (BV/TV: 71.8869%; BMD: 0.9782 g/cm3; TB.Th: 0.1366 mm; Tb.N: 6.9318 mm-1; Tb.Sp: 0.0735 mm) were achieved in a SD rat periodontitis model after administering once a week for four weeks. The MIN-loaded PLGA microspheres were proved to be an efficient and safe treatment for periodontitis by procedural antibacterial, anti-inflammatory, and bone restoration.

Improved Core Viscosity Achieved by PDLLA10kCo-Incorporation Promoted Drug Loading and Stability of mPEG2k-b-PDLLA2.4k Micelles.

PURPOSE: This study aims to investigate the effect of poly(D, L-lactic acid)10K (PDLLA10K) incorporation on the drug loading and stability of poly(ethylene glycol)2K-block-poly(D, L-lactide)2.4K (mPEG2k-b-PDLLA2.4k) micelles. In addition, a suitable lyophilization protector was screened for this micelle to obtain favorable lyophilized products. METHODS: The incorporation ratios of PDLLA10k were screened based on the particle size and drug loading. The dynamic stability, core viscosity, drug release, stability in albumin, and in vivo pharmacokinetic characteristics of PDLLA10k incorporated micelles were compared with the original micelles. In addition, the particle size variation was used as an indicator to screen the most suitable lyophilization protectant for the micelles. DSC, FTIR, XRD were used to illustrate the mechanism of the lyophilized protectants. RESULTS: After the incorporation of 5 wt% PDLLA10K, the maximum loading of mPEG2k-b-PDLLA2.4k micelles for TM-2 was increased from 26 wt% to 32 wt%, and the in vivo half-life was increased by 2.25-fold. Various stability of micelles was improved. Also, the micelles with hydroxypropyl-ß-cyclodextrin (HP-ß-CD) as lyophilization protectants had minimal variation in particle size. CONCLUSIONS: PDLLA10k incorporation can be employed as a strategy to increase the stability of mPEG2k-b-PDLLA2.4k micelles, which can be attributed to the viscosity building effect. HP-ß-CD can be used as an effective lyophilization protectant since mPEG and HP-ß-CD form the pseudopolyrotaxanesque inclusion complexes.

The preparation and characterisation of tasteless core-shell clarithromycin microcapsules.

This study aims to fabricate core-shell clarithromycin (CAM) microcapsules to cover up the bitter taste of CAM by spray drying with aqueous polymer dispersion. Water dispersion of Eudragit EPO and Surelease® were innovatively used to encapsulate CAM into microcapsules via a one-step spray-drying method. The inlet air temperature, airflow rate, CAM-polymer ratio, and particle size of CAM were optimised based on drug content and T6% (the time taken for the drug to release equal to 6% w/w). The powder properties were assessed by measuring particle size and microstructure using SEM, FT-IR, and PXRD. Furthermore, selected batch was assessed for their drug content, encapsulation efficiency, in vitro release, bitterness, and stability studies. EPO-Surelease® (1: 4) microcapsules had an average diameter (D50) of 37.69 ± 3.61 µm with a span of 2.395. The drug contents and encapsulation efficiency of EPO-Surelease®(1:4) were 10.89% and 63.7%, respectively. EPO-Surelease® (1:4) microcapsules prepared by spray drying with aqueous polymer dispersion can effectively mask the bitter taste of CAM.

Alleviating the Influence of Circadian Rhythms and Drug Properties to the Release of Paliperidone Gel Matrix Tablets with Compression Coating Technology and Microenvironment Shaping.

The influence of circadian rhythms is an important content in oral dosage form study which is shown as different pH conditions and gastrointestinal dynamics in the gastrointestinal tract. The purpose of this study was to alleviate the influence of circadian rhythms and drug properties to the release of gel matrix tablets in vitro and in vivo. In this study, the compression coating technology and microenvironment shaping were utilized to achieve the alleviation of the influence of circadian rhythms and drug properties. The compression coating technology was used to alleviate the influence of gastrointestinal dynamics, and microenvironment shaping was used to alleviate the interference of different pH condition variations. The self-made compression coating tablet could maintain a consistent release rate in different pH conditions and different dynamic environments in vitro for 24 h. In vivo, the pharmacokinetic parameters Cmax and Tmax were 3701.675 ng/mL and 24 h, respectively, and the release effect in vivo was similar to the paliperidone osmotic pump tablet with the ability to alleviate the influence of circadian rhythms. The correlation coefficient R2 was 0.9914 for the self-made paliperidone compression coating tablet in vitro-in vivo correlation. The interference caused by circadian rhythms was alleviated so that the compression coating technology with microenvironment shaping could replace the osmotic pump technology with easier preparation process and cheaper costs in vitro and in vivo and achieve the effect of alleviating the interference of circadian rhythms.

Progesterone Phospholipid Gel for Intramuscular Administration Prepared by In Situ-Phase Separation.

Long-term daily injection of progesterone for the treatment of threatened abortion can be a source of considerable pain to patients. To reduce the frequency of injections and improve patient compliance, a novel injectable phospholipid-based phase separation gel (PPSG) was prepared using small molecular materials such as phospholipids, medium-chain triglycerides (MCTs), and ethanol. Progesterone was loaded into PPSGs to promote rapid gel formation in situ via a sol-gel transformation mechanism, thereby achieving a sustained controlled release. Furthermore, progesterone was distributed in the oil-water interface layer and within the oil phase. Solvent exchange drives phase transitions, and phospholipid vesicle formation and rupture are likely to promote drug release and gel degradation. At a drug loading of 140 mg/mL, a progesterone release of up to 60% could be reached within 9 days according to the release curve in vitro. Pharmacokinetic studies demonstrated that the progesterone-loaded PPSGs released the drug continuously for over 7 days, the half-life was eight times higher than that of progesterone oil solution, and relative bioavailability of up to 184.90% was obtained. Collectively, the sustained release properties for hydrophobic cargos would effectively enhance patient compliance. Moreover, PPSGs are promising drug delivery systems that have high market value and biosafety given the readily accessible and safe excipients.

Chitosan-Coated Liposomes: The Strategy to Reduce Intestinal Toxicity and Improve Bioavailability of Oral Vinorelbine.

In recent years, the oral administration of vinorelbine has gradually replaced intravenous administration in the treatment of several types of tumors. Even though the risk of phlebitis is avoided with oral administration, oral vinorelbine is still not a highly patient-compliant route due to the severe gastrointestinal toxicity. Vinorelbine-loaded liposomes with high encapsulation efficiency and suitable particle size were prepared using the ammonium sulfate gradient method. Chitosan-coated liposomes showed the slowest in vitro release compared to uncoated liposomes and vinorelbine solution. No damage was observed in the intestinal epithelial cells of mice orally administered with coated vinorelbine liposomes due to the low presence of the free drug in the gastrointestinal tract and the LD50 was increased from 129.83 to 182.25 mg/kg compared to oral vinorelbine solution. In addition, the positive surface potential of chitosan-coating endowed liposomes with mucosal adhesive function, delaying the time to reach the peak plasma concentration of vinorelbine from 1 to 4 h after administration. And bioavailability was increased to 2.1-fold compared to vinorelbine solution. In short, a new strategy to address the severe gastrointestinal side effects of oral vinorelbine has been developed.

Evaluation of Emulsifying Ability of Phospholipids by Langmuir Monolayers and Stability of High Oil Ratio O/W Emulsions.

High oil ratio fat emulsion injections are prone to poor emulsification, rapid creaming, and other quality problems; therefore, the selection of emulsifiers with high emulsifying ability is crucial for the production of fat emulsions. The existing methods used to evaluate the emulsifying ability of emulsifier are to evaluate the emulsifying ability from the emulsifier itself. In the study, Langmuir monolayer selected the most miscible phospholipid with oil phase from the alternative three phospholipids by studying the molecular interaction between oil phase and phospholipid at the air/water interface. The miscibility and thermodynamic stability analyses of the different oil phase/phospholipid mixed monolayers were performed, and the data from [Formula: see text] and [Formula: see text] concluded that all three oil phases had the strongest molecular interaction with E80 and the best miscibility. The emulsions were then prepared and analyzed by the results of particle size, ζ-potential, and stability of the emulsions, where the surface free energy in the stability test echoed the results reflected by the [Formula: see text] values in the thermodynamic stability test. These results indicate that Langmuir monolayers can be used to study the interaction between oil phase and emulsifier, thus providing new ideas for evaluating the emulsifying ability of phospholipids.

Stable Atropine Loaded Film As a Potential Ocular Delivery System For Treatment Of Myopia.

PURPOSE: The objective of the present study was to prepare stable and high bioavailability ocular atropine loaded films (ATR-films) as potential ocular drug delivery systems for the treatment of myopia. METHODS: ATR-films were prepared by the solvent casting method and the physical properties of films were evaluated including thickness, water content, light transparency, disintegration time, and mechanical properties. FT-IR, DSC, XRD, TGA, AFM, and Raman spectroscopy were performed to characterize the film. The stability test was conducted under different conditions, such as high humidity, high temperature, and strong light. The pharmacokinetic study and irritation assessment were conducted in rabbits. The efficacy of ATR-films was evaluated by refraction and ocular biometry in myopia guinea pigs. RESULT: After optimizing the formulation, the resulting ATR-film was flexible and transparent with lower water content (8.43% ± 1.25). As expected, the ATR-film was stable and hydrolysate was not detected, while the content of hydrolysate in ATR eye drops can reach up to 8.1867% (limit: < 0.2%) in the stability study. The safety assessment both in vitro and in vivo confirmed that the ATR-film was biocompatible. Moreover, the bioavailability (conjunctiva 3.21-fold, cornea 2.87-fold, retina 1.35-fold, sclera 2.05-fold) was greatly improved compared with the ATR eye drops in vivo pharmacokinetic study. The pharmacodynamic study results showed that the ATR-film can slow the progress of form-deprivation myopia (~ 100 ± 0.81D), indicating that it has a certain therapeutic effect on form-deprivation myopia. CONCLUSION: The ATR-film with good stability and high bioavailability will have great potential for the treatment of myopia.

Co-delivery of gemcitabine and cisplatin via Poly (L-glutamic acid)-g-methoxy poly (ethylene glycol) micelle to improve the in vivo stability and antitumor effect.

PURPOSE: The intention of the study was to co-delivery gemcitabine and cisplatin with totally different nature by prodrug and micelle strategy to improve its in vivo stability and antitumor effect. METHODS: A prodrug of gemcitabine (mPEG-PLG-GEM) was synthesized through the covalent conjugation between the primary amino group of gemcitabine and the carboxylic group of poly (L-glutamic acid)-g-methoxy poly (ethylene glycol) (mPEG-PLG). It was prepared into micelles by a solvent diffusion method, and then combined with cisplatin through chelation to prepare gemcitabine and cisplatin co-loaded mPEG-PLG micelles (mPEG-PLG-GEM@CDDP micelles). RESULTS: Gemcitabine and cisplatin in each micelle group were released more slowly than in solutions. In addition, pharmacokinetics behaviors of them were improved after encapsulated in prodrug micelles. T1/2z of gemcitabine and cisplatin encapsulated in micelles were prolonged to 6.357 h (mPEG-PLG-GEM), 10.490 h (mPEG-PLG@CDDP), 5.463 h and 12.540 h (mPEG-PLG-GEM@CDDP) compared with GEM@CDDP solutions (T1/2z = 1.445 h and 7.740 h). The ratio of synergy between gemcitabine and cisplatin (3:1 ~ 1:1(n/n)) was guaranteed in the systemic circulation, thus improving its antitumor effect. The results of biochemical analysis showed that GEM@CDDP-Sol was more toxic to kidneys and marrow compared with mPEG-PLG-GEM@CDDP micelles. CONCLUSIONS: By prodrug strategy, gemcitabine and cisplatin with totally different nature were prepared into micelles and obtained a better pharmacokinetic behavior. And the dual drug delivery system performed a better in vivo stability and antitumor effect compared with each single drug delivery system in the experiment. Scheme. Schematic of mPEG-PLG-GEM@CDDP micelles' formation and action process.

Preparation of mPEG-b-PLA/TM-2 Micelle Lyophilized Products by Mixed Lyoprotectors and Antitumor Effect In Vivo.

The objective of this study was to encapsulate the poorly water-soluble drug TM-2 into polymer micelles using mPEG2k-b-PLA2.4k to increase its aqueous solubility and improve its therapeutic effect for liver cancer. Furthermore, in order to achieve long-term storage, the micelle solution was successfully freeze-dried. This study theoretically clarified the possibility of enhancing the water solubility of TM-2 using mPEG2k-b-PLA2.4k micelles as well as the protective effects of mixed lyoprotectants. Differential scanning calorimetry (DSC), X-ray diffraction (XRD), and scanning electron microscopy (SEM) were performed, which showed that the drug has a good affinity with the polymer (χ = 0.489) according to Flory-Huggins theory and that lyoprotectants reduced the crystallinity of PEG in mPEG2k-b-PLA2.4k and played a space-protective role in the lyophilization process. In vivo experiments showed that micellization could improve the drug bioavailability and give a high therapeutic effect with a tumor inhibition rate of 84.5% under the tolerated dose.

Hydrophilic and Electroneutral Nanoparticles to Overcome Mucus Trapping and Enhance Oral Delivery of Insulin.

The oral delivery of macromolecules using nanoparticles is limited by secreted mucus, resulting in low contact or internalization via intestinal cells and, thus, both mucus trapping and further low cellular uptake need to be overcome. Here, hydrophilic and electroneutral nanoparticles were developed to overcome mucus trapping and enhance the oral delivery of macromolecules. Mesoporous silica nanoparticles (MSNs) were synthesized and modified with a hydrophilic block polymer (poly(lactic acid)-methoxy poly(ethylene glycol), PLA-PEG), and then an overall electroneutrality and promoted cellular uptake were achieved by sequential modification with cell-penetrating peptides (CPPs). Reduced hydrophobic and electrostatic interactions of MSN@PLA-PEG-CPP with mucus decreased mucus trapping by 36.0%, increased the cellular uptake of MSN@PLA-PEG-CPP by 2.3-folds in mucous conditions via active heparan sulfate proteoglycan receptor (HSPG)-mediated and caveolae-mediated endocytosis and electrostatic interactions. Furthermore, insulin, a model macromolecular drug, was successfully loaded into the nanoparticles (INS@MSN@PLA-PEG-CPP). Compared with insulin solution, in vitro cellular uptake in mucous conditions and in vivo pharmacodynamic effects were significantly increased by 9.1- and 14.2-folds, respectively. As well, all nanoparticles with or without insulin loading presented negligible in vitro and in vivo toxicity. Herein, hydrophilic and electroneutral nanoparticles with sequential PEG and CPP modification could promote cellular uptake against mucus trapping and finally show good prospects for oral insulin delivery.

Toxicity Reduction and Efficacy Promotion of Doxorubicin in the Treatment of Breast Tumors Assisted by Enhanced Oral Absorption of Curcumin-Loaded Lipid-Polyester Mixed Nanoparticles.

Curcumin (CUR), a polyphenol derived from turmeric, exhibits anticancer and anti-inflammatory properties. However, it has poor water solubility, stability, and oral bioavailability. To overcome these limitations, lipid-polyester mixed nanoparticles (NPs) embedded in enteric polymer-EudragitL100-55(Eu) were formulated (CUR-NPs-Eu). NPs composed of mPEG-b-PCL have a hybrid core made up of middle chain triglyceride (MCT) and poly(ε-caprolactone) (PCL) for enhancing drug loading. The CUR-NPs with MCT content of 10% had a particle size of 121.2 ± 16.8 nm, ζ potential of -16.25 ± 1.38 mV, drug loading of 9.8%, and encapsulation efficiency of 87.4%. The transport of the CUR-NPs-Eu across Caco-2 monolayers is enhanced compared with CUR alone (1.98 ± 0.94 × 10-6 of curcumin versus 55.43 ± 6.06 × 10-6 cm/s of curcumin-loaded NPs) because of the non-disassociated nanostructure during absorption. The absolute bioavailability of CUR-NPs-Eu was 7.14%, which was drastically improved from 1.08% of the CUR suspension (CUR-Sus). Therefore, in the xenograft 4T1 tumor-bearing mice, increased drug accumulation in heart and tumor was noticed because of enhanced oral bioavailability of CUR. The chemosensitizing effect of CUR was attributed to its NF-κB reduction effect (148 ± 11.83 of DOX alone versus 104 ± 8.71 of combined therapy, ng/g tissue). The cardioprotective effect of CUR was associated with maintenance of cardiac antioxidant enzyme activity and down-regulation of NF-κB. This study provided a partial illustration of the mechanisms of chemosensitizing and cardioprotective effects of CUR utilizing the oral availability promotion effect brought by the NPs-Eu formulation. And these results further demonstrated that the capability of this NPs-Eu system in oral delivery of poorly soluble and poorly permeable drugs.

A Novel Eyes Topical Drug Delivery System: CsA-LNC for the Treatment of DED.

PURPOSE: The objective of the present work was to prepare safe and effective Ciclosporin A Lipid nanocapsule (CsA-LNC) eye-drops for the treatment of DED. METHODS: The phase-inversion method was used to prepared different sizes CsA-LNC. CsA biodistribution in ocular after topical administration in rabbits was analyzed by a validated UPLC-MS/MS method. The efficacy of CsA-LNCs (25 nm, 50 nm, 85 nm) was evaluated using the tear breakup time, fluorescein staining, tear production, inflammatory cytokines and histopathology tests. The safety of CsA-LNCs was study by the score of ocular irritation and histological examination study. RESULTS: CsA-LNCs(20-100 nm) were successfully prepared, An in vivo PK study showed significant improvement of the bioavailability (4.20-fold (25 nm), 2.15-fold (50 nm) and 2.33-fold (85 nm)) in bulbar conjunctiva, and great permeability was observed in the cornea for CsA-LNCs compared with CsA emulsion. An in vivo PD study showed that CsA-LNCs have great efficacy for DED, and the effect was improved over CsA emulsion. CsA-LNCs were safe and not cause significant irritation to the eyes surface of rabbits. CONCLUSION: This work has demonstrated CsA-LNCs, in particular small sizes CsA-LNC, are safe and effective with promising potential to treat DED. Grapical abstract.

Panax quinquefolium saponin liposomes prepared by passive drug loading for improving intestinal absorption.

Panax quinquefolium saponin (PQS) composed of 45% pseudo-ginsenoside F11 (PF11), is a natural mixture of sterol compounds obtained from the American ginseng plant, having numerous promising benefits for health. However, low solubility and permeability limit the development of PQS as a therapeutic agent for oral administration. In this study, PQS liposomes (PQS-Lips) were prepared by thin layer hydration, an in situ single-pass intestinal perfusion (SPIP) model was used to verify the improvement of membrane permeability of PQS-Lips. PQS-Lips had a high encapsulation efficiency (EE) of 65%∼70%, a particle size about 100.0 nm, and a zeta potential of -60 mV with regular spherical surface. FTIR and DSC showed the PQS in liposomes were amorphous, indicating that hydrogen bonds formed between one or several hydroxyl groups in PQS and C-O group at the phospholipid polar terminal. In addition, PQS-Lips showed sustained release in vitro than PQS at pH 1.2 and pH 6.8, and PQS-Lips had good stability in simulated gastric and intestinal fluid. Then, the absorption rate (K a) and effective permeability coefficient (P eff) of PQS-Lips in the whole small intestine were significantly higher than those in PQS solution (PQS-Sol), which proved that the PQS-Lips could significantly increase the membrane permeability of PQS and promote its absorption in the small intestine. From the experimental results, it could be known that liposome technology could effectively improve the absorption of PQS in the small intestine.

Contrastive Studies of Cytarabine/Daunorubicin Dual-Loaded Liposomes Prepared by pH Gradient and Cu2+ Gradient Method.

Conventional combination chemotherapy often leads to unsatisfactory clinical outcomes due to the different distribution characteristics in vivo and the superimposed systemic toxicity of the drug cocktail. Co-encapsulated nano preparations have been gradually developed in recent years. In this work, cytarabine (Ara-C)/daunorubicin (DNR) liposomes were prepared by the pH gradient (ADL-pH) and Cu2+ gradient (ADL-Cu) methods. Ara-C did not show significant release from either ADL-Cu or ADL-pH in vitro during 168 h, which related to its logPoct. Different drug-loading patterns showed different release characteristics of DNR due to the different existence forms, ADL-pH contains the citrate form, while in ADL-Cu, there is the Cu2+ complex. To evaluate the release behavior, daunorubicin liposome (DL) and daunorubicin-Cu2+ complex (DNR-Cu) were prepared. The addition of EDTA in the release medium significantly increased the release rate of DNR from DL-Cu, while lower pH accelerated DNR release from both DL-pH and DL-Cu. The PK confirmed that ADL-Cu and ADL-pH could prolong the drug circulation time, and ADL-Cu had a mean retention time 1.5 times that of ADL-pH. Furthermore, both liposomes allowed the two drugs to maintain a relatively constant plasma concentration ratio for a prolonged time. Cytotoxicity assays showed that Ara-C/DNR with a molar ratio of 5:1 and 3:1 exhibited an excellent synergistic effect, which was more obvious at 5:1. In vitro antitumor results revealed that ADL-Cu exhibited more cytotoxicity than ADL-pH. All factors tested in this work suggest the considerable potential of ADL-Cu and ADL-pH for anticancer treatment.

In Vitro and In Vivo Evaluation of SP94 Modified Liposomes Loaded with N-14NCTDA, a Norcantharimide Derivative for Hepatocellular Carcinoma-Targeting.

The purpose of this research is to develop a liposomal drug delivery system, which can selectively target hepatocellular carcinoma (HCC) to deliver the antitumor agent N-14NCTDA, a C14 alkyl chain norcantharimide derivative of norcantharidin. N-14NCTDA-loaded liposomes were successfully prepared by lipid membrane hydration and extrusion methods. SP94, a targeting peptide for HCC cells, was attached to the liposomes loaded with N-14NCTDA by the post-insertion method to obtain SP94 modified liposomes (SP94-LPs). SP94-LPs had a significant cytotoxicity against Hep G2 cells with the IC50 of 15.395 ± 0.89 µg/mL, which is lower than that of NCTD-S (IC50 = 20.863 ± 0.56 µg/mL) and GAL-LPs (IC50 = 24.589 ± 1.02 µg/mL). Compared with conventional liposomes (Con-LPs), SP94-LPs showed greater cellular uptake in Hep G2 cells. Likewise, significant tumor suppression was achieved in H22 tumor-bearing mice which were treated with SP94-LPs. The tumor inhibition rate (IRw) of SP94-LPs was 82 ± 0.98%, obviously higher than that of GAL-LPs (69 ± 1.39%), Con-LPs (60 ± 2.78%), and NCTD-S (51 ± 3.67%). SP94-LPs exhibited a significant hepatocellular carcinoma-targeting activity in vitro and in vivo, which will provide a new alternative for hepatocellular carcinoma treatment in future. Graphical Abstract.

Characterizing and Exploring the Differences in Dissolution and Stability Between Crystalline Solid Dispersion and Amorphous Solid Dispersion.

Solid dispersion is one of the most effective ways to improve the dissolution of insoluble drugs. When the carrier can highly disperse the drug, it will increase the wettability of the drug and reduce the surface tension, thus improving the solubility, dissolution, and bioavailability. However, amorphous solid dispersions usually have low drug loading and poor stability. Therefore, the goal of this work is to study the increased dissolution and high stability of high drug-loading crystalline solid dispersion (CSD), and the difference in dissolution and stability of high-loading and low-loading amorphous solid dispersion (ASD). A CSD of nimodipine with a drug loading of 90% was prepared by wet milling, with hydroxypropyl cellulose (model: HPC-SL) and sodium dodecyl sulfate as stabilizers and spray drying. At the same time, the gradient drug-loaded ASD was prepared by hot melt extrusion with HPC-SL as the carrier. Each preparation was characterized by DSC, PXRD, FT-IR, SEM, and in vitro dissolution testing. The results indicated that the drug in CSD existed in a crystalline state. The amorphous drug molecules in the low drug-loading ASD were uniformly dispersed in the carrier, while the drug state in the high drug-loading ASD was aggregates of the amorphous drug. At the end of the dissolution assay, the 90% drug-loading CSD increased cumulative dissolution to 60%, and the 10% drug-loading ASD achieved a cumulative dissolution rate of 90%.

Aprepitant Intravenous Emulsion Based on Ion Pairing/Phospholipid Complex for Improving Physical and Chemical Stability During Thermal Sterilization.

An aprepitant (APT) cholesteryl hemisuccinate (CHEMS) ion pair complex emulsion (AIPE) with high lecithin content was prepared to improve sterilization stability through the film dispersion homogenization method; therefore, it could be a promising delivery system of APT. Medium-chain triglycerides (MCT) was selected as the oil phase to improve the solubility and stability of APT in oil phase. DSC, XRD, FT-IR, and 1H-NMR spectroscopies confirmed that the APT-CHEMS ion pair (AIP) was formed between CHEMS and APT. The formation of AIP significantly increased the hydrophobicity of APT, allowing it to be completely embedded in the oil phase core to improve chemical stability and decrease hydrolysis of APT in the water phase. Also, CHEMS had a strong affinity with lecithin and could stabilize lipid membranes, forming a stronger and thicker interface membrane to increase the physical stability of AIPE. As a result, AIPE could withstand autoclaving at 120°C for 8 min without any change of particle size or content. Furthermore, AIPE with a potential of - 53.4 mV remained stable through spatial repulsion during sterilization. The encapsulation efficiency of AIPE was over 90% and the particle size was 106.8 ± 65.62 nm(0.286). Pharmacokinetic study in rats was comparable with that of CINVANTI which yielded a relative bioavailability of 114.31% indicating that the AIPE had similar pharmacokinetic processes in vivo with the analog of CINVANTI®. The AUC0-t of the AIPE was 4.31-fold that of the APT solution.