Assessment of in situ degradation of chlorinated ethenes and bacterial community structure in a complex contaminated groundwater system.

The occurrence of in situ degradation of chlorinated ethenes was investigated using an integrated approach in a complex groundwater system consisting of several geological units. The assessment of hydrogeochemistry and chlorinated ethenes distribution using principal component analysis (PCA) in combination with carbon stable isotope analysis revealed that chlorinated ethenes were subjected to substantial biodegradation. Shifts in isotopic values up to 20.4 per thousand, 13.9 per thousand, 20.1 per thousand and 31.4 per thousand were observed between geological units for tetrachloroethene (PCE), trichloroethene (TCE), cis-dichloroethene (cDCE) and vinyl chloride (VC), respectively. The use of specific biomarkers (16S rRNA gene) indicated the presence of Dehalococcoides sp. DNA in 20 of the 33 evaluated samples. In parallel, the analysis of changes in the bacterial community composition in the aquifers using canonical correspondence analysis (CCA) indicated the predominant influence of the chlorinated ethene concentrations (56.3% of the variance, P=0.005). The integrated approach may open new prospects for the assessment of spatial and temporal functioning of bioattenuation in contaminated groundwater systems.

Assessment of the natural attenuation of chlorinated ethenes in an anaerobic contaminated aquifer in the Bitterfeld/Wolfen area using stable isotope techniques, microcosm studies and molecular biomarkers.

The in situ degradation of chlorinated ethenes was assessed in an anaerobic aquifer using stable isotope fractionation approaches, microcosm studies and taxon specific detection of specific dehalogenating groups of bacteria. The aquifer in the Bitterfeld/Wolfen region in Germany contained all chlorinated ethenes, benzene and toluene as contaminants. The concentrations and isotope composition of the chlorinated ethenes indicated biodegradation of the contaminants. Microcosm studies confirmed the presence of in situ microbial communities capable of the complete dechlorination of tetrachloroethene. Taxon specific investigation of the microbial communities indicated the presence of various potential dechlorinating organisms including Dehalococcoides, Desulfuromonas, Desulfitobacterium and Dehalobacter. The integrated approach, using metabolite spectra, molecular marker analysis and isotope studies, provided several lines of evidence for natural attenuation of the chlorinated ethenes.

Regionally contaminated aquifers--toxicological relevance and remediation options (Bitterfeld case study).

Large-scale contaminated megasites like Bitterfeld in eastern Germany are characterized by a regional contamination of soil, surface water and groundwater as a result of a long and varied history of chemical production. While the contaminants in soils and sediments mostly represent a localized problem, pollutants in groundwater may spread to uncontaminated areas and endanger receptors like surface water and drinking water wells according to the site-specific hydrologic regime. From the toxicological point of view, the contaminants at the Bitterfeld megasite represent a dangerous cocktail of various harmful substances coming from a multitude of sources. Appropriate remediation techniques must be able to remedy the specific problems arising from hot spot areas within the megasite in addition to preventing a further extension of the contaminated zone towards uncontaminated compartments. Therefore, a combination of specifically designed remediation technologies based on the pump and treat-principle with in situ technologies, such as reactive walls and monitored/enhanced natural attenuation, is necessary to efficiently address the miscellaneous challenges at this megasite. In this paper, the currently known contaminant distribution, the associated problems for human health and the environment and possible remediation strategies are presented for the Bitterfeld megasite.

Evaluation of combined direct-push methods used for aquifer model generation.

Most established methods to characterize aquifer structure and hydraulic conductivities of hydrostratigraphical units are not capable of delivering sufficient information in the spatial resolution that is desired for sophisticated numerical contaminant transport modeling and adapted remediation design. With hydraulic investigation methods based on the direct-push (DP) technology such as DP slug tests, DP injection logging, and the hydraulic profiling tool, it is possible to rapidly delineate hydrogeological structures and estimate their hydraulic conductivity in shallow unconsolidated aquifers without the need for wells. A combined application of these tools was used for the investigation of a contaminated German refinery site and for the setup of hydraulic aquifer models. The quality of DP investigation and the models was evaluated by comparisons of tracer transport simulations using these models and measured breakthroughs of two natural gradient tracer tests. Model scenarios considering the information of all tools together showed good reproduction of the measured breakthroughs, indicating the suitability of the approach and a minor impact of potential technical limitations. Using the DP slug tests alone yielded significantly higher deviations for the determined hydraulic conductivities compared to considering two or three of the tools. Realistic aquifer models developed on basis of such combined DP investigation approaches can help optimize remediation concepts or identify flow regimes for aquifers with a complex structure.