The baffle shape effects on natural convection flow and entropy generation in a nanofluid-filled permeable container with a magnetic field.

Enhancing heat transfer rates within enclosures is a topic of considerable interest since it has several technical applications. Most heat transfer research projects focus on increasing the heat transfer rates of thermal systems since this will raise the systems' total efficiency. The geometry of the enclosure might have a substantial impact on heat transfer rates. This research studies quantitatively the natural convection of a nanofluid in a complicated form geometry with many baffle configurations. The system's governing equations were addressed by the Galerkin Finite Element Method (GFEM). The main consideration was given to the effects of the following factors: The Darcy number (Da), which ranges from 10-2 to 10-5; the Hartmann number (Ha), which ranges from 0 to 100; the volumetric fraction (ϕ), which ranges from 0 to 0.08, and the Rayleigh number (Ra) (102 to 106). The results suggested that raising Ra increases heat transfer discharge, whereas raising Ha and Da decreases it. In terms of heat transmission, case 1 (the case with a wavenumber of 1 and the zigzag pointing outward) is determined to be the optimum cavity structure, as it obtained the highest mean Nusselt (Nuavg) number when compared to other cases. At the highest studied Ra number, growing (ϕ) from 0 to 0.8 improved Nuavg by 25%, while growing Da from 10-2 to 10-5 and Ha from 0 to 100 declined Nuavg by 57% and 48%, respectively. The reason for the improvement in the values of the (Nu) is due to the speed of fluid movement within the compartment. Also, the shape of fins plays a major role in strengthening and weakening thermal activity.

Analytical investigation of Carreau fluid flow through a non-circular conduit with wavy wall.

Peristaltic flow through an elliptic channel has vital significance in different scientific and engineering applications. The peristaltic flow of Carreau fluid through a duct with an elliptical cross-section is investigated in this work . The proposed problem is defined mathematically in Cartesian coordinates by incorporating no-slip boundary conditions. The mathematical equations are solved in their dimensionless form under the approximation of long wavelength. The solution of the momentum equation is obtained by applying perturbation technique ([Formula: see text] as perturbation parameter) along with a polynomial solution. We introduce a new polynomial of twenty degrees to solve the energy equation. The solutions of mathematical equations are investigated deeply through graphical analysis. It is noted that non-Newtonian effects are dominant along the minor axis. It is found that flow velocity is higher in the channels having a high elliptical cross-section. It is observed from the streamlines that the flow is smooth in the mid-region, but they transform into contours towards the peristaltic moving wall of the elliptic duct.

Nanoencapsulated phase change material in a trapezoidal prism wall under the magnetic field effect for energy storage purposes.

Recently, Nano-encapsulated phase change materials (NEPCM) have attracted the attention of researchers due to their promising application in thermal management. This research investigates magnetohydrodynamic mixed convection of NEPCM contained within a lid-driven trapezoidal prism enclosure containing a hot-centered elliptical obstacle. The upper cavity wall is moving at a constant velocity; both inclined walls are cold, while the rest of the walls are insulated. The Galerkin Finite Element Method was used to solve the system's governing equations. The influence of Reynolds number (Re 1-500), Hartmann number (Ha = 0-100), NEPCM volumetric fraction φ (0-8%), and elliptical obstacle orientation α (0-3π/4) on thermal fields and flow patterns are introduced and analyzed. The results indicated that the maximum heat transfer rate is observed when the hot elliptic obstacle is oriented at 90°; an increment of 6% in the Nu number is obtained in this orientation compared to other orientations. Reducing Ha from 100 to 0 increased Nu by 14%. The Maximum value of the Bejan number was observed for the case of Ha = 0, α = 90° and φ = 0.08.

Mathematical analysis of nonlinear thermal radiation and nanoparticle aggregation on unsteady MHD flow of micropolar nanofluid over shrinking sheet.

Significance of study: Typical liquids aren't great for engineering because of their low heat conductivity. To enhance heat transfer capabilities in industries as diverse as computers, pharmaceuticals, and molten metals, researchers and scientists have developed nanofluids, which are composed of nanoparticles distributed in a base fluid. Aim of study: Mathematical modeling of micropolar C u - H 2 O nanofluid driven by a deformable sheet in the stagnation area with nanoparticle aggregation, thermal radiation, and the mass suction action has been investigated in this paper. In this case, copper ( C u ) nanoparticles make up the nanofluid. Method: ology: We have used suitable transformations to arrive at a system of nonlinear ODEs, which we then solve numerically in MATHEMATICA using Runge-Kutta methods of the fourth order coupled with shooting approaches. Findings: Tables and graphs are used to examine the effects of immersed flow and display profiles of physical parameters of interest. This includes velocities, temperatures, skin friction, and Nusselt numbers. The average heat transfer rate increased to 17 . 725 % as the volume percentage of copper nanoparticles in micropolar nanofluid increased from 0.0 to 0.01 . Additionally, the results showed that the local Nusselt number of the micropolar nanofluid increased along with an increase in the unsteady and radiation parameters. However, its value is reduced in an undeniable fashion if a material parameter is present. The impact of radiation on the aggregation of nanoparticles is compared and contrasted with the effects of a non-radiative scenario, and the resulting fluctuations in Nusselt numbers are provided in tables. When the results of this study were compared to data that had already been published about some cases, a lot of agreement was found.

Ulam-Hyers stability of tuberculosis and COVID-19 co-infection model under Atangana-Baleanu fractal-fractional operator.

The intention of this work is to study a mathematical model for fractal-fractional tuberculosis and COVID-19 co-infection under the Atangana-Baleanu fractal-fractional operator. Firstly, we formulate the tuberculosis and COVID-19 co-infection model by considering the tuberculosis recovery individuals, the COVID-19 recovery individuals, and both disease recovery compartment in the proposed model. The fixed point approach is utilized to explore the existence and uniqueness of the solution in the suggested model. The stability analysis related to solve the Ulam-Hyers stability is also investigated. This paper is based on Lagrange's interpolation polynomial in the numerical scheme, which is validated through a specific case with a comparative numerical analysis for different values of the fractional and fractal orders.

On the Bioconvective Aspect of Viscoelastic Micropolar Nanofluid Referring to Variable Thermal Conductivity and Thermo-Diffusion Characteristics.

The bioconvective flow of non-Newtonian fluid induced by a stretched surface under the aspects of combined magnetic and porous medium effects is the main focus of the current investigation. Unlike traditional aspects, here the viscoelastic behavior has been examined by a combination of both micropolar and second grade fluid. Further thermophoresis, Brownian motion and thermodiffusion aspects, along with variable thermal conductivity, have also been utilized for the boundary process. The solution of the nonlinear fundamental flow problem is figured out via convergent approach via Mathematica software. It is noted that this flow model is based on theoretical flow assumptions instead of any experimental data. The efficiency of the simulated solution has been determined by comparing with previously reported results. The engineering parameters' effects are computationally evaluated for some definite range.

Corrigendum: Numerical study of perforated obstacles effects on the performance of solar parabolic trough collector.

[This corrects the article DOI: 10.3389/fchem.2022.1089080.].

Numerical analysis of magnetohydrodynamics Casson nanofluid flow with activation energy, Hall current and thermal radiation.

In this study we analyzed the flow, heat and mass transfer behavior of Casson nanofluid past an exponentially stretching surface under the impact of activation energy, Hall current, thermal radiation, heat source/sink, Brownian motion and thermophoresis. Transverse magnetic field with the assumption of small Reynolds number is implemented vertically. The governing partial nonlinear differential equations of the flow, heat and mass transfer are transformed into ordinary differential equations by using similarity transformation and solved numerically by using Matlab bvp4c package. The impact of each of the Hall current parameter, thermal radiation parameter, heat source/sink parameter, Brownian motion parameter, Prandtl number, thermophoresis parameter and magnetic parameter on velocity, concentration and temperature, is discussed through graphs. The skin friction coefficient along the x-and z-directions, the local Nusselt number and the Sherwood number are calculated numerically to look into the inside behavior of the emerging parameters. It is witnessed that the flow velocity is a diminishing function of the thermal radiation parameter and the behavior has observed in the case of Hall parameter. Moreover, mounting values of Brownian motion parameter reduce the nanoparticle concentration profile.

Thermally Dissipative Flow and Entropy Analysis for Electromagnetic Trihybrid Nanofluid Flow Past a Stretching Surface.

The growth of hybrid nanofluids can be connected to their enhanced thermal performance as pertains to the dynamics of automobile coolant among others. In addition to that, the thermal characteristics of water-based nanofluids carrying three different types of nanoparticles are incredible. Keeping in view this new idea, the current investigation explores ternary hybrid nanofluid flow over a stretching sheet. Joule heating and viscous dissipation are addressed in the heat equation. Three distinct kinds of nanoparticles, namely, magnesium oxide, copper, and MWCNTs, are suspended in water to form a ternary hybrid nanofluid with the combination MgO-Cu-MWCNTs-H2O. To stabilize the flow of the ternary hybrid nanofluid, transverse magnetic and electric fields have been considered in the fluid model. The production of entropy has been analyzed for the modeled problem. A comparative study for ternary, hybrid, and traditional nanofluids has also been carried out by sketching statistical charts. The equations that govern the problem are shifted to dimension-free format by employing transformable variables, and then they are solved by the homotopy analysis method (HAM). It has been revealed in this work that the flow of fluid opposes by magnetic parameter and supports by electric field the volumetric fraction of ternary hybrid nanofluid, while thermal profiles are gained by the growing values of these parameters. Boosting values of the electric field, magnetic parameters, and Eckert number support the Bejan number and oppose the production of entropy. Statistically, it has been established in this work that a ternary hybrid nanofluid has a higher thermal conductivity than hybrid or traditional nanofluids.

Thermal efficiency in hybrid (Al2O3-CuO/H2O) and tri-hybrid (Al2O3-CuO-Cu/H2O) nanofluids between converging/diverging channel with viscous dissipation function: Numerical analysis.

Heat transfer and energy storage remain a core problem for industrialists and engineers. So, the concept of new heat transfer fluids, namely, nanofluids and hybrid nanofluids, has been introduced so far. Recently, a new third generation of heat transfer fluids has been developed known as modified hybrid nanofluids (MHNs), synthesized by ternary nanomaterials and the host fluid. Therefore, the study was conducted to investigate the energy storage efficiency between (Al2O3-CuO-Cu/H2O)mhnf and (Al2O3-CuO/H2O)hnf in the presence of novel viscous dissipation effects. The problem is developed for a channel with stretchable walls via thermophysical attributes of binary and ternary guest nanomaterials and the host liquid. The model is tackled numerically and furnished results for the dynamics, most specifically energy storage efficiency in (Al2O3-CuO-Cu/H2O)mhnf. It is examined that the third generation of heat transfer fluids (Al2O3-CuO-Cu/H2O)mhnf has high thermal energy storage efficiency than traditional nano and hybrid nanofluids. Therefore, these new insights in heat transfer would be beneficial and cope with the problems of energy storage in the modern technological world.

Thermal mechanism in magneto radiated [(Al2O3-Fe3O4)/blood]hnf over a 3D surface: Applications in Biomedical Engineering.

Nanofluids are a new generation of fluids which help in improving the efficiency of thermal systems by improving heat transport rate and extensive applications of this class extensively fall in biomedical engineering, the electronics industry, applied thermal and mechanical engineering, etc. The core concern of this study is to examine the interaction of Al2O3-Fe3O4 hybrid nanoparticles of lamina shaped with blood over a 3D surface by impinging novel impacts of non-linear thermal radiations, stretching, velocity slippage, and magnetic field. This leads to a mathematical flow model in terms of highly non-linear differential equations via nanofluid-effective characteristics and similarity rules. To know the actual behavior of (Al2O3-Fe3O4)/blood inside the concerned region, mathematical investigation is performed via numerical technique and the results are obtained for different parameter ranges. The imposed magnetic field of high strength is a better tool to control the motion of (Al2O3-Fe3O4)/blood inside the boundary layer, whereas, stretching of the surface is in direct proportion of the fluid movement. Furthermore, thermal radiations (Rd) and γ 1 are observed to be beneficial for thermal enhancement for both (Al2O3-Fe3O4)/blood and (Al2O3)/blood.

Dynamics of Rotating Micropolar Fluid over a Stretch Surface: The Case of Linear and Quadratic Convection Significance in Thermal Management.

This article analyzes the significance of linear and quadratic convection on the dynamics of micropolar fluid due to a stretching surface in the presence of magnetic force and a rotational frame. Modern technological implementations have attracted researchers to inquire about non-Newtonian fluids, so the effect of linear and nonlinear convection conditions is accounted for in the dynamics of non-Newtonian fluid. The highly nonlinear governing equations are converted into a system of dimensionless ODEs by using suitable similarity transformations. The bvp4c technique is applied in MATLAB software to obtain a numerical solution. This investigation examines the behavior of various parameters with and without quadratic convection on the micro-rotation, velocity, and temperature profiles via graphical consequences. The velocity profile decreases with a higher input by magnetic and rotating parameters, and fluid velocity is more elevated in the nonlinear convection case. However, the temperature profile shows increasing behavior for these parameters and quadratic convection increases the velocity profile but has an opposite tendency for the temperature distribution. The micro-rotation distribution is augmented for higher magnetic inputs in linear convection but reduces against thermal buoyancy.

Numerical Study of Lid-Driven Hybrid Nanofluid Flow in a Corrugated Porous Cavity in the Presence of Magnetic Field.

The lid-driven top wall's influence combined with the side walls' waviness map induce the mixed convection heat transfer, flow behavior, and entropy generation of a hybrid nanofluid (Fe3O4-MWCNT/water), a process analyzed through the present study. The working fluid occupies a permeable cubic chamber and is subjected to a magnetic field. The governing equations are solved by employing the GFEM method. The results show that the magnetic force significantly affects the working fluid's thermal and flow behavior, where the magnetic force's perpendicular direction remarkably improves the thermal distribution at Re = 500. Also, increasing Ha and decreasing Re drops both the irreversibility and the heat transfer rate. In addition, the highest undulation number on the wavy-sided walls gives the best heat transfer rate and the highest irreversibility.

Review of Heat Transfer Analysis in Different Cavity Geometries with and without Nanofluids.

Many strategies have been attempted for accomplishing the needed changes in the heat-transfer rate in closed cavities in recent years. Some strategies used include the addition of flexible or hard partitions to the cavities (to split them into various pieces), thickening the borders, providing fins to the cavities, or altering the forms or cavity angles. Each of these methods may be used to increase or decrease heat transmission. Many computational and experimental investigations of heat transport in various cavity shapes have been conducted. The majority of studies focused on improving the thermal efficiency of heat transmission in various cavity containers. This paper introduced a review of experimental, numerical, and analytical studies related to heat transfer analyses in different geometries, such as circular, cylindrical, hexagonal, and rectangular cavities. Results of the evaluated studies indicate that the fin design increased heat transmission and sped up the melting time of the PCM; the optimal wind incidence angle for the maximum loss of combined convective heat depends on the tilt angle of the cavity and wind speed. The Nusselt number graphs behave differently when decreasing the Richardson number. Comparatively, the natural heat transfer process dominates at Ri = 10, but lid motion is absent at Ri = 1. For a given Ri and Pr, the cavity without a block performed better than the cavity with a square or circular block. The heat transfer coefficient at the heating sources has been established as a performance indicator. Hot source fins improve heat transmission and reduce gallium melting time.

Entropy Generation in 2D Lid-Driven Porous Container with the Presence of Obstacles of Different Shapes and under the Influences of Buoyancy and Lorentz Forces.

This paper includes a numerical investigation of a hybrid fluid containing 4% of Al2O3-Cu nanoparticles in a lid-driven container. The upper wall of the container has a high temperature and is movable. The lower wall is cool and wavy. An obstacle is set in the middle of the container for its effect on thermal activity. The medium is permeable to the fluid, and the entire system is immersed in a fixed-effect magnetic field. The digital simulation is achieved using the technique of Galerkin finite element (GFEM) which solves the differential equations. This investigation aims to know the pattern of heat transfer between the lateral walls and the lower wall of the container through the intervention of a set of conditions and criteria, namely: the strength of the magnetic field changes in the range of (Ha = 0 to 100); the chamber porosity varies in the range of (Da = 10-5 to 10-2); the strength of buoyancy force is varied according to the Grashof number (Gr = 102 to 104); the cross-section of the baffle includes the following shapes-elliptical, square, triangular and circular; the surface of the lower wall contains waves; and the number changes (N = 2 to 8). Through this research, it was concluded that the triangular shape of the baffle is the best in terms of thermal activity. Also, increasing the number of lower-wall waves reduces thermal activity. For example, the change in the shape of the obstacle from the elliptical to triangular raises the value of Nu number at a rate of 15.54% for Ha = 0, N = 8, and Gr = 104.

Flow investigation of second grade micropolar nanofluid with porous medium over an exponentially stretching sheet.

This article mainly focuses on the influence of heat and mass transportation of micropolar second grade nanofluid toward porous medium of an exponentially stretched surface. The significance of activation energy and viscous dissipation with magnetic effect are taken into deliberated. Furthermore, to analyze the heat and mass transport scrutiny the concentration and thermal slip boundary conditions are assessed on the surface of the sheet. The convenient similarity variables are adopted to transfer the non-linear governing PDEs into the dimensionless ODEs and their corresponding boundary conditions also transformed. The nonlinear coupled ODEs are numerically solved by the usage of BVP4C MATLAB technique. The obtained numerical estimations are displayed graphically to display the significance of the various parameters against the velocity, temperature, microrotation, concentration distributions. It is noticed that larger estimations of micropolar and second grade parameter improves the fluid velocity consequently, while opposite trend is found for the higher estimation of porous medium parameter. Further, it is observed that the skin friction rate is boosted by the increment of ε and ß, whereas opposite trend is noted against the mass transfer rate and heat transfer rate.

Numerical Study of 3D MHD Mixed Convection and Entropy Generation in Trapezoidal Porous Enclosure Filled with a Hybrid Nanofluid: Effect of Zigzag Wall and Spinning Inner Cylinder.

A numerical study was performed to analyze the impact of the combination of several factors on heat transfer rate, flow behavior, and entropy generation in a hybrid nanofluid occupying a porous trapezoid enclosure containing a rotating inner tube. The governing equations were discretized and solved using the Finite Element Method using Comsol multiphysics. The effects of the Darcy and Hartman number, nanoparticle volume fraction (from 0 to 6%), the utilization of various zigzag patterns of the hot wall, and the rotation speed of the inner tube (Ω = 100. 250 and 500) are illustrated and discussed in this work. The outputs reveal that flow intensity has an inverse relationship with Hartman number and a direct relationship with the Darcy number and the velocity of the inner tube, especially at high numbers of undulations of the zigzag hot wall (N = 4); also, intensification of heat transfer occurs with increasing nanoparticle volume fraction, Darcy number and velocity of the inner tube. In addition, entropy generation is strongly affected by the mentioned factors, where increasing the nanoparticle concentration augments the thermal entropy generation and reduces the friction entropy generation; furthermore, the same influence can be obtained by increasing the Hartman number or decreasing the Darcy number. However, the lowest entropy generation was found for the case of Ø = 0, Ha = 0 and Da = 0.01.

Darcy-Forchheimer Flow of Water Conveying Multi-Walled Carbon Nanoparticles through a Vertical Cleveland Z-Staggered Cavity Subject to Entropy Generation.

To date, when considering the dynamics of water conveying multi-walled carbon nanoparticles (MWCNT) through a vertical Cleveland Z-staggered cavity where entropy generation plays a significant role, nothing is known about the increasing Reynold number, Hartmann number, and Darcy number when constant conduction occurs at both sides, but at different temperatures. The system-governing equations were solved using suitable models and the Galerkin Finite Element Method (GFEM). Based on the outcome of the simulation, it is worth noting that increasing the Reynold number causes the inertial force to be enhanced. The velocity of incompressible Darcy-Forchheimer flow at the middle vertical Cleveland Z-staggered cavity declines with a higher Reynold number. Enhancement in the Hartman number causes the velocity at the center of the vertical Cleveland Z-staggered cavity to be reduced due to the associated Lorentz force, which is absent when Ha = 0 and highly significant when Ha = 30. As the Reynold number grows, the Bejan number declines at various levels of the Hartmann number, but increases at multiple levels of the Darcy number.

2D MHD Mixed Convection in a Zigzag Trapezoidal Thermal Energy Storage System Using NEPCM.

In a magnetic field, two-dimensional (2D) mixed convection is investigated within a zigzagged trapezoidal chamber. The lower side of the trapezoidal chamber is irregular, in particular, a zigzagged wall with different zigzag numbers N. The fluid particles move in the room due to the motion of the upper wall, while the porosity-enthalpy approach represents the melting process. The thermal parameters of the fluid are enhanced by what is called a nano-encapsulated phase change material (NEPCM) consisting of polyurethane as the shell and a nonadecane as the core, while water is used as the base fluid. In order to treat the governing equations, the well-known Galerkin finite element method (GFEM) is applied. In addition, the heat transfer (HT) irreversibility and the fluid friction (FF) irreversibility are compared in terms of the average Bejan number. The main results show that the melt band curve behaves parabolically at smaller values of Reynolds number (Re) and larger values of Hartmann number (Ha). Moreover, minimizing the wave number is better in order to obtain a higher heat transfer rate.

Fuzzy Control Modeling to Optimize the Hardness and Geometry of Laser Cladded Fe-Based MG Single Track on Stainless Steel Substrate Prepared at Different Surface Roughness.

Metallic glass (MG) is a promising coating material developed to enhance the surface hardness of metallic substrates, with laser cladding having become popular to develop such coatings. MGs properties are affected by the laser cladding variables (laser power, scanning speed, spot size). Meanwhile, the substrate surface roughness significantly affects the geometry and hardness of the laser-cladded MG. In this research, Fe-based MG was laser-cladded on substrates with different surface roughness. For this purpose, the surfaces of the substrate were prepared for cladding using two methods: sandpaper polishing (SP) and sandblasting (SB), with two levels of grit size used for each method (SP150, SP240, SB40, SB100). The experiment showed that substrate surface roughness affected the geometry and hardness of laser-cladded Fe-based MG. To predict and optimize the geometry and hardness of laser-cladded Fe-based MG single tracks at different substrate surface roughness, a fuzzy logic control system (FLCS) was developed. The FLCS results indicate that it is an efficient tool to select the proper preparation technique of the substrate surface for higher clad hardness and maximum geometry to minimize the number of cladding tracks for full surface cladding.