Electrochemical Enantioselective Nickel-Catalyzed Cross-Coupling of Aldehydes with Aryl Iodides.

The preparation of enantioenriched diarylmethanol derivatives is described using nickel-catalyzed electrochemical cross-couplings between various alkyl/aryl aldehydes and aryl iodides. Performed in an electrochemical cell equipped with an iron anode and a nickel cathode, this electrocatalytic variant led to the scalemic targeted products in the presence of 2,2-bis((4R,5S)-4,5-diphenyl-4,5-dihydrooxazol-2-yl)acetonitrile (L2), as enantiopure cyano-bis(oxazoline) ligand. X-ray structure analysis of a pre-catalyst, for instance the [Ni(II)(L2)2] complex, with L2 as an anionic bisoxazolinate ligand, confirms the chemical formulation of one nickel surrounded by two ligands. The redox behavior of the new Ni complexes generated in situ was first assessed by cyclic voltammetry showing a redox wave at ca. -1.5 V that can be assigned to the two-electron reduction of the Ni(II) center to the Ni(0) state. Oxidative addition between the electrogenerated Ni(0) complex and aryl iodide was evidenced. An intense current was observed in presence of a mixture of the two substrates pertaining an electrocatalytic process. Interestingly, we found that the sacrificial iron anode plays a crucial role in the catalytic mechanism.

Substrate-dependent regiodivergence in [3 + 2] annulation reactions of 2-(phenacylethylidene)cyclobutanones with thioureas.

The [3 + 2] annulation reaction between a thiourea, an ambident dinucleophile, and a 2-(phenacylethylidene)cyclobutanone, containing a novel pull-pull alkene system, could in principle proceed with several chemo- and regioselectivity profiles. Here we describe a convenient synthesis of the functionalized cyclobutanone substrates and show that they react with thioureas in a manner that is rationalized mechanistically in terms of the steric and electronic effects at play. The [3 + 2] annulation proceeds in mild, additive-free conditions to provide access to previously unknown cyclobutane-fused imidazolidine-2-thione and thiazolidine-2-imine derivatives in good yields.

Homochiral vs. heterochiral preference in chiral self-recognition of cyclic diols.

The structure and clustering propensity of a chiral derivative of cis-1,2-cyclohexanediol, namely, 1-phenyl-cis-1,2-cyclohexanediol (cis-PCD), has been studied under supersonic expansion conditions by combining laser spectroscopy with quantum chemistry calculations. The presence of the phenyl substituent induces conformational locking relative to cis-1,2-cyclohexanediol (cis-CD), and only one conformer of the bare molecule is observed by both Raman and IR-UV double resonance spectroscopy. The homochiral preference inferred for the dimer formation at low enough temperature is in line with the formation of a conglomerate in the solid state. The change in clustering propensity in cis-PCD relative to trans-1,2-cyclohexanediol (trans-CD), which shows heterochiral preference, is explained by the presence of the phenyl substituent rather than the effect of cis-trans isomerism. Indeed the transiently chiral cis-CD also forms preferentially heterodimers, whose structure is very close to that of the corresponding trans-CD dimer.

A Rationally Designed Iron(II) Catalyst for C(sp3)-C(sp2) and C(sp3)-C(sp3) Suzuki-Miyaura Cross-Coupling.

Despite the paramount importance of the Suzuki-Miyaura coupling (SMC) in academia and industry, and the great promise of iron to offer sustainable catalysis, iron-catalyzed SMC involving sp3-hybridized partners is still in its infancy. We herein report the development of a versatile, well-defined electron-deficient anilido-aldimine iron(II) catalyst. This catalyst effectively performed C(sp3)-C(sp2) and C(sp3)-C(sp3) SMC of alkyl halide electrophiles and (hetero)aryl boronic ester and alkyl borane nucleophiles respectively, in the presence of a lithium amide base. These couplings operated under mild reaction conditions and displayed wide functional group compatibility including various medicinally relevant N-, O- and S-based heterocycles. They also tolerated primary, secondary and tertiary alkyl halides (Br, Cl, I), electron-neutral, -rich and -poor boronic esters and primary and secondary alkyl boranes. Our methodology could be directly and efficiently applied to synthesize key intermediates relevant to pharmaceuticals and a potential drug candidate. For C(sp3)-C(sp2) couplings, radical probe experiments militated in favor of a carbon-centered radical derived from the electrophile. At the same time, reactions run with a pre-formed activated boron nucleophile coupled to competition experiments supported the involvement of neutral, rather than an anionic, (hetero)aryl boronic ester in the key transmetalation step.

Diversity in the Synthesis of Functionalized Cyclohexene Oxide Derivatives by a Cycloaddition-Fragmentation Sequence from Benzene Oxide.

A cycloaddition-fragmentation sequence from benzene oxide and a nitroso- or azo-dienophile was investigated as a tool for access to highly substituted cyclohexene oxide derivatives. Alkyl lithium-promoted fragmentation of the cycloadducts led to the cyclic derivatives after 1,4- or 1,2-addition of a second equivalent of the lithium reagent. New fragmentation processes were observed when using non-nucleophilic bases of highly hindered alkyl lithium reagents. All reactions proceeded with complete stereocontrol.

How Crystal Symmetry Dictates Non-Local Vibrational Circular Dichroism in the Solid State.

Solid-State Vibrational Circular Dichroism (VCD) can be used to determine the absolute structure of chiral crystals, but its interpretation remains a challenge in modern spectroscopy. In this work, we investigate the effect of a twofold screw axis on the solid-state VCD spectrum in a combined experimental and theoretical analysis of P21 crystals of (S)-(+)-1-indanol. Even though the space group is achiral, a single proper symmetry operation has an important impact on the VCD spectrum, which reflects the supramolecular chirality of the crystal. Distinguishing between contributions originating from molecular chirality and from chiral crystal packing, we find that while IR absorption hardly depends on the symmetry of the space group, the situation is different for VCD, where completely new non-local patterns emerge. Understanding the two underlying mechanisms, namely gauge transport and direct coupling, will help to use VCD to distinguish polymorphic forms.

Bio-Inspired Bimetallic Cooperativity Through a Hydrogen Bonding Spacer in CO2 Reduction.

At the core of carbon monoxide dehydrogenase (CODH) active site two metal ions together with hydrogen bonding scheme from amino acids orchestrate the interconversion between CO2 and CO. We have designed a molecular catalyst implementing a bimetallic iron complex with an embarked second coordination sphere with multi-point hydrogen-bonding interactions. We found that, when immobilized on carbon paper electrode, the dinuclear catalyst enhances up to four fold the heterogeneous CO2 reduction to CO in water with an improved selectivity and stability compared to the mononuclear analogue. Interestingly, quasi-identical catalytic performances are obtained when one of the two iron centers was replaced by a redox inactive Zn metal, questioning the cooperative action of the two metals. Snapshots of X-ray structures indicate that the two metalloporphyrin units tethered by a urea group is a good compromise between rigidity and flexibility to accommodate CO2 capture, activation, and reduction.

Collective Total Synthesis of Mavacuran Alkaloids through Intermolecular 1,4-Addition of an Organolithium Reagent.

We report a synthetic endeavor towards the highly strained pentacyclic caged framework of the mavacuran alkaloids which culminated with the concise total synthesis of C-fluorocurine, C-profluorocurine, C-mavacurine, normavacurine, 16-epi-pleiocarpamine and taberdivarine H. We designed a strategy involving late-stage construction of the D ring by Michael addition of a vinylic nucleophile to a 2-indolyl acrylate moiety. While the intramolecular Michael addition did not succeed, we were able to perform a diastereoselective unusual intermolecular 1,4-addition of a functionalized vinyl lithium reagent to a readily accessible Michael acceptor with the assistance of the piperidine nitrogen atom through the formation of a complex as suggested by DFT computations. Final cyclization was achieved by nucleophilic substitution to form an ammonium intermediate. The first total syntheses of C-profluorocurine and C-fluorocurine were finalized by the dihydroxylation of C-mavacurine and a pinacol rearrangement, respectively.

A Tale of Two Complexes: Electro-Assisted Oxidation of Thioanisole by an "O2 Activator/Oxidizing Species" Tandem System of Non-Heme Iron Complexes.

We report two new FeIII complexes [L1 FeIII (H2 O)](OTf)2 and [L2 FeIII (OTf)], obtained by replacing pyridines by phenolates in a known non-heme aminopyridine iron complex. While the original, starting aminopyridine [(L5 2 )FeII (MeCN)](PF6 ) complex is stable in air, the potentials of the new FeIII/II couples decrease to the point that [L2 FeII ] spontaneously reduces O2 to superoxide. We used it as an O2 activator in an electrochemical setup, as its presence allows to generate superoxide at a much more accessible potential (>500 mV gain). Our aim was to achieve substrate oxidation via the reductive activation of O2 . While L2 FeIII (OTf) proved to be a good O2 activator but a poor oxidation system, its association with another complex (TPEN)FeII (PF6 )2 generates a complementary tandem couple for electro-assisted oxidation of substrates, working at a very accessible potential: upon reduction, L2 FeIII (OTf) activates O2 to superoxide and transfers it to (TPEN)FeII (PF6 )2 leading in fine to the oxidation of thioanisole.

Revisiting the Three Vanadium Sandwich-Type Polyoxometalates: Structures, Solution Behavior, and Redox Properties.

It is well known that the trivacant anions α-B-[XW9O33]9- react with vanadyl ions to give the sandwich-type polyoxometalates [(VIVO)3(XW9O33)2]12- with X = AsIII or SbIII. Nevertheless, the oxidized derivatives have been obtained selectively by electrochemical oxidation from the fully reduced derivatives [(VIVO)3(XW9O33)2]12- allowing full characterization both in solution using UV-vis and multinuclear (17O, 51V, and 183W) NMR spectroscopies and in the solid state by single-crystal X-ray diffraction. Structural analysis of the oxidized [(VVO)3(XW9O33)2]9- polyanions is consistent with the idealized D3h symmetry, while solution studies reveal a fair hydrolytic stability in a wide pH range from 0 to 6. Besides, the D3h polyanions either as reduced or oxidized forms [(VO)3(AsW9O33)2]9/12- have been identified as the thermodynamic product that results from the conversion of the C2v polyanion [(H2O)(VO)3(AsW9O33)2]9/12- through moderate heating. Conversely, the SbIII-containing derivative gives exclusively the D3h polyanion, probably either due to the extended lone pair of the trigonal SbIII heterogroup that prevents the formation of the C2v arrangement or the lability of the oxo-metalate bonds that favor chemical exchange. The electrochemical studies of sandwich-type polyoxometalates revealed that each {V═O} group gives rise to a one-electron transfer process. At last, the redox properties appear strongly altered in the 0.3-5 pH range, consistent with proton-coupled electron transfers.

Access to valuable building blocks by the regio- and enantioselective ring opening of itaconic anhydride by lipase catalysis.

Herein, we report for the first time the highly regio- and enantioselective ring opening of a biobased itaconic anhydride catalyzed by the Pseudomonas cepacia lipase (PCL) in tert-butyl methyl ether (TBME) at room temperature. This method is easy, efficient and eco-friendly and can be performed in one step with a series of highly valuable monoester itaconates (achiral or enantioenriched) using various alcohols as nucleophiles with 100% atom economy. In all cases, the ß-monoester isomer was the predominant product of the reaction. Using achiral primary alcohols as substrates, a variety of novel itaconates were obtained in moderate to excellent yields (50-90%). For select examples, product characterization was carried out using X-ray diffraction, in addition to the standard techniques. The application of this approach was performed for the preparation of enantioenriched 4-monoester itaconates via enzymatic kinetic resolution.

A case study of the MAC (masked acyl cyanide) oxyhomologation of N,N-dibenzyl-L-phenylalaninal with anti diastereoselectivity: preparation of (2S,3S)-allophenylnorstatin esters.

The three-component reaction between a protected α-amino aldehyde, an alcohol and an α-silyloxymalononitrile provides an expedient access to protected α-hydroxy-ß-amino acid derivatives. The prototypical process, performed on N-Cbz-phenylalaninal, is known to proceed with syn diastereoselectivity. The present study demonstrates that the diastereoselectivity of the reaction can be inverted, using the rationale of a Felkin-Anh interaction model. Reactions performed on N,N-dibenzyl-L-phenylalaninal proceed with a high anti diastereoselectivity, providing a panel of synthetically useful ester derivatives of (2S,3S)-allophenylnorstatin. The procedure is exploited to accomplish one of the most efficient syntheses of the title compound to date, in 3 steps (66% yield) from N,N-dibenzyl-L-phenylalaninal.

Diastereo- and Enantioselective Inverse-Electron-Demand Diels-Alder Cycloaddition between 2-Pyrones and Acyclic Enol Ethers.

A broadly applicable diastereo- and enantioselective inverse-electron-demand Diels-Alder reaction of 2-pyrones and acyclic enol ethers is reported herein. Using a copper(II)-BOX catalytic system, bridged bicyclic lactones are obtained in very high yields (up to 99 % yield) and enantioselectivities (up to 99 % ee) from diversely substituted 2-pyrones and acyclic enol ethers. Mechanistic experiments as well as DFT calculations indicate the occurrence of a stepwise mechanism. The synthetic potential of the bridged bicyclic lactones is showcased by the enantioselective synthesis of polyfunctional cyclohexenes and cyclohexadienes, as well as a carbasugar unit.

Deciphering the Metal Speciation in Low-Molecular-Weight Complexes by IMS-MS: Application to the Detection of Manganese Superoxide Dismutase Mimics in Cell Lysates.

The detection and quantification of exogenous metal complexes are crucial to understanding their activity in intricate biological media. MnII complexes are difficult to detect and quantify because of low association constants, and high lability. The superoxide dismutase (SOD) mimic (or mimetic) labelled Mn1 is based on a 1,2-di-aminoethane functionalized with imidazole and phenolate and has good intrinsic anti-superoxide, antioxidant and anti-inflammatory activities in lipopolysaccharide (LPS)-activated intestinal epithelial HT29-MD2 cells, similar to that of its propylated analogue labelled Mn1P. Ion mobility spectrometry-mass spectrometry (IMS-MS) is a powerful technique for separating low molecular weight (LMW) metal complexes and can even separate complexes with the same ligand but bound to different divalent metal cations with similar ionic radii. We demonstrated the intracellular presence of the Mn1 and Mn1P complexes, at least partly intact, in lysates of cells incubated with the complexes and estimated the intracellular Mn1P concentration using a Co-13 C6 analogue.

A Photo- and Redox-Driven Two-Directional Terthiazole-Based Switch: A Combined Experimental and Computational Investigation.

Terthiazoles with redox-active substituents like an N-methyl pyridinium group and ferrocene have been synthesized and their photo- and electro-chromic behaviors were investigated. The presence of two lateral N-methyl pyridinium substituents in the structure of terthiazole proved to be effective in inducing not only the reductive ring-closure of the terthiazole core but also its oxidative ring-opening reaction, leading to the first terarylene-based switch able to fully operate both photochemically and electrochemically. Moreover, the large increase in the redox potential between its open and closed form (700 mV) means that a part of the photon energy necessary to trigger the cyclization is stored in the form of chemical potential available for other works. Introduction of a second redox-active unit such as ferrocene onto the central thiazolyl moiety is found to inhibit the photochromism of the switch but not its redox switchability, which, instead, got improved for the ring-opening reaction via the redox properties of the ferrocenyl unit. The optical and redox properties of the switch in its different oxidation states are analyzed with the aid of DFT calculations in order to rationalize different switching processes.

Synthesis of a Seco iso-Secologanin Aglycone Analogue of Interest toward Secoiridoids and Monoterpene Indole Alkaloids.

We report the access to an acyclic iso-secologanin aglycone analogue relevant to secoiridoids and monoterpene indole alkaloids. Its synthesis involved the regioselective allylic alkylation of a linear dienyl carbonate with dimethyl malonate, which was catalyzed by an iridium complex, and an anti-Markovnikov Wacker-type oxidation of the terminal alkene of the branched product that was obtained. The thus-formed aldehyde was engaged in a Pictet-Spengler reaction with tryptamine toward monoterpene indole alkaloids.

Ligand Radical Mediated Water Oxidation by a Family of Copper o-Phenylene Bis-oxamidate Complexes.

Understanding the reactivity landscape for the activation of water until the formation of the O-O bond and O2 release in molecular chemistry is a decisive step in guiding the elaboration of cost-effective catalysts for the oxygen-evolving reaction (OER). Copper(II) complexes have recently caught the attention of chemists as catalysts for the 4e-/4H+ water oxidation process. While a copper(IV) intermediate has been proposed as the reactive intermediate species, no spectroscopic signature has been reported so far. Copper(III) ligand radical species have also been formulated and supported by theoretical studies. We found, herein, that the reactivity sequence for the water oxidation with a family of Copper(II) o-phenylene bis-oxamidate complexes is a function of the substitution pattern on the periphery of the aromatic ring. In-situ EPR, FTIR, and rR spectroelectrochemical studies helped to sequence the elementary electrochemical and chemical events leading toward the O2 formation selectively at the copper center. EPR and FTIR spectroelectrochemistry suggests that ligand-centered oxidations are preferred over metal-centered oxidations. rR spectroelectrochemical study revealed the accumulation of a bis-imine bound copper(II) superoxide species, as the reactive intermediate, under catalytic turnover, which provides the evidence for the O-O bond formation during OER.

Enantioselective hydrophosphonylation of N-Boc imines using chiral guanidine-thiourea catalysts.

The enantioselective hydrophosphonylation of N-Boc imines was investigated using a new family of pseudo-symmetric guanidine-thiourea catalysts, providing α-amino phosphonates in moderate to high yields with good enantioselectivity. The catalyst was heterogenized by polymerization with styrene and the resulting catalyst was applied to reactions under continuous-flow conditions.

A Brønsted acid catalyzed tandem reaction for the diastereoselective synthesis of cyclobuta-fused tetrahydroquinoline carboxylic esters.

A novel Brønsted acid catalyzed tandem reaction provides highly functionalized cyclobuta-fused tetrahydroquinoline carboxylic esters from anilines and 2-alkylenecyclobutanones in good to high yield. During the reaction a dynamic diastereoselective cyclization is achieved, resulting in the formation of three contiguous stereocenters with high stereoselectivity.

Enhanced mechano-responsive fluorescence in polydiacetylene thin films through functionalization with tetrazine dyes: photopolymerization, energy transfer and AFM coupled to fluorescence microscopy studies.

The development of mechano-responsive fluorescent materials is essential for the design and construction of reliable and versatile sensors for mechanical stress. Herein, novel energy transfer-based systems with tetrazine fluorophore and a polydiacetylene (PDA) backbone are synthesized and studied comparatively to a simple polydiacetylene in the form of thin films. Their photopolymerization properties, energy transfer efficiencies and fluorescent response to nanoscale mechanical stimulation are assessed. It is pointed out that the self-assembling group on the PDA chain influences the geometrical arrangement of the chains and the film morphology and, as a consequence, the efficiency and kinetics of polymerization and the energy transfer efficiency. Moreover, we show that the strategy of introducing tetrazine fluorophore provides a new effective route of improving force detectability by fluorescence using polydiacetylenes as mechano-responsive units.