A Versatile Strategy for Concurrent Passive Daytime Radiative Cooling and Sustainable Energy Harvesting.

Developing versatile systems that can concurrently achieve energy saving and energy generation is critical to accelerate carbon neutrality. However, challenges on designing highly effective, large scale, and multifunctional photonic film hinder the concurrent combination of passive daytime radiative cooling (PDRC) and utilization of sustainable clean energies. Herein, a versatile scalable photonic film (Ecoflex@h-BN) with washable property and excellent mechanical stability is developed by combining the excellent scattering efficiency of the hexagonal boron nitride (h-BN) nanoplates with the high infrared emissivity and ideal triboelectric negative property of the Ecoflex matrix. Strikingly, sufficiently high solar reflectance (0.92) and ideal emissivity (0.97) endow the Ecoflex@h-BN film with subambient cooling effect of ≈9.5 °C at midday during the continuous outdoor measurements. In addition, the PDRC Ecoflex@h-BN film-based triboelectric nanogenerator (PDRC-TENG) exhibits a maximum peak power density of 0.5 W m-2 . By reasonable structure design, the PDRC-TENG accomplishes effective wind energy harvesting and can successfully drive the electronic device. Meanwhile, an on-skin PDRC-TENG is fabricated to harvest human motion energy and monitor moving states. This research provides a novel design of a multifunctional PDRC photonic film, and offers a versatile strategy to realize concurrent PDRC and sustainable energies harvesting.

A Novel Multifunctional Photonic Film for Colored Passive Daytime Radiative Cooling and Energy Harvesting.

Passive daytime radiative cooling (PDRC) materials with sustainable energy harvesting capability is critical to concurrently reduce traditional cooling energy utilized for thermal comfort and transfer natural clean energies into electricity. Herein, a versatile photonic film (Ecoflex@BTO@UAFL) based on a novel fluorescent luminescence color passive radiative cooling with triboelectric and piezoelectric effect is developed by filling the dielectric BaTiO3 (BTO) nanoparticles and ultraviolet absorption fluorescent luminescence (UAFL) powder into the elastic Ecoflex matrix. Test results demonstrate that the Ecoflex@BTO@UAFL photonic film exhibits a maximum passive radiative cooling effect of ∽10.1 °C in the daytime. Meanwhile, its average temperature drop in the daytime is ~4.48 °C, which is 0.91 °C higher than that of the Ecoflex@BTO photonic film (3.56 °C) due to the addition of UAFL material. Owing to the high dielectric constant and piezoelectric effect of BTO nanoparticles, the maximum power density (0.53 W m-2, 1 Hz @ 10 N) of the Ecoflex@BTO photonic film-based hybrid nanogenerator is promoted by 70.9% compared to the Ecoflex film-based TENG. This work provides an ingenious strategy for combining PDRC effects with triboelectric and piezoelectric properties, which can spontaneously achieve thermal comfort and energy conservation, offering a new insight into multifunctional energy saving.

Exploring the limits of metasurface polarization multiplexing capability based on deep learning.

Metasurfaces provide a new approach for planar optics and thus have realized multifunctional meta-devices with different multiplexing strategies, among which polarization multiplexing has received much attention due to its convenience. At present, a variety of design methods of polarization multiplexed metasurfaces have been developed based on different meta-atoms. However, as the number of polarization states increases, the response space of meta-atoms becomes more and more complex, and it is difficult for these methods to explore the limit of polarization multiplexing. Deep learning is one of the important routes to solve this problem because it can realize the effective exploration of huge data space. In this work, a design scheme for polarization multiplexed metasurfaces based on deep learning is proposed. The scheme uses a conditional variational autoencoder as an inverse network to generate structural designs and combines a forward network that can predict meta-atoms' responses to improve the accuracy of designs. The cross-shaped structure is used to establish a complicated response space containing different polarization state combinations of incident and outgoing light. The multiplexing effects of the combinations with different numbers of polarization states are tested by utilizing the proposed scheme to design nanoprinting and holographic images. The polarization multiplexing capability limit of four channels (a nanoprinting image and three holographic images) is determined. The proposed scheme lays the foundation for exploring the limits of metasurface polarization multiplexing capability.

Differential Evolution Particle Swarm Optimization for Phase-Sensitivity Enhancement of Surface Plasmon Resonance Gas Sensor Based on MXene and Blue Phosphorene/Transition Metal Dichalcogenide Hybrid Structure.

A differential evolution particle swarm optimization (DEPSO) is presented for the design of a high-phase-sensitivity surface plasmon resonance (SPR) gas sensor. The gas sensor is based on a bilayer metal film with a hybrid structure of blue phosphorene (BlueP)/transition metal dichalcogenides (TMDCs) and MXene. Initially, a Ag-BlueP/TMDCs-Ag-MXene heterostructure is designed, and its performance is compared with that of the conventional layer-by-layer method and particle swarm optimization (PSO). The results indicate that optimizing the thickness of the layers in the gas sensor promotes phase sensitivity. Specifically, the phase sensitivity of the DEPSO is significantly higher than that of the PSO and the conventional method, while maintaining a lower reflectivity. The maximum phase sensitivity achieved is 1.866 × 106 deg/RIU with three layers of BlueP/WS2 and a monolayer of MXene. The distribution of the electric field is also illustrated, demonstrating that the optimized configuration allows for better detection of various gases. Due to its highly sensitive characteristics, the proposed design method based on the DEPSO can be applied to SPR gas sensors for environmental monitoring.

Optically transparent infrared selective emitter for visible-infrared compatible camouflage.

Visible-infrared compatible camouflage is significant to enhance the equipment survivability through counteracting the modern detecting and surveillance systems. However, there are still great challenges in simultaneously achieving multispectral camouflage with high transmittance in visible, low emissivity in the atmospheric windows and high emissivity in the non-atmospheric window, which can be attributed to the mutual influence and restriction within these characteristics. Here, we proposed an optically transparent infrared selective emitter (OTISE) composed of three Ag-ZnO-Ag disk sub-cells with anti-reflection layers, which can synchronously improve the visible transmittance and widen absorption bandwidth in the non-atmospheric window by enhancing and merging resonance response of multi-resonators. Test results reveal that low emissivity in infrared atmospheric windows, high emissivity in the 5-8 µm non-atmospheric window and high optical transparency have been obtained. In addition, the radiative flux of OTISE in 3-5 µm and 8-14 µm are respectively 34.2% and 9.3% of that of blackbody and the energy dissipation of OTISE is 117% of that of chromium film. Meanwhile, it keeps good optical transparency due to the ultrathin Ag film. This work provides a novel strategy to design the optically transparent selective emissive materials, implying a promising application potential in visible and infrared camouflage technology.

Multi-Gas Detection System Based on Non-Dispersive Infrared (NDIR) Spectral Technology.

Automobile exhaust gases, such as carbon dioxide (CO2), carbon monoxide (CO), and propane (C3H8), cause the greenhouse effect, photochemical smog, and haze, threatening the urban atmosphere and human health. In this study, a non-dispersive infrared (NDIR) multi-gas detection system consisting of a single broadband light source, gas cell, and four-channel pyroelectric detector was developed. The system can be used to economically detect gas concentration in the range of 0-5000 ppm for C3H8, 0-14% for CO, and 0-20% for CO2. According to the experimental data, the concentration inversion model was established using the least squares between the voltage ratio and the concentration. Additionally, the interference coefficient between different gases was tested. Therefore, the interference models between the three gases were established by the least square method. The concentration inversion model was experimentally verified, and it was observed that the full-scale error of the sensor changed less than 3.5%, the detection repeatability error was lower than 4.5%, and the detection stability was less than 2.7%. Therefore, the detection system is economical and energy efficient and it is a promising method for the analysis of automobile exhaust gases.

Synthesis Strategy of Metal Oxide Quantum Wires via a Nanoparticle-Induced Graphene Oxide Rolling Procedure.

The efficient synthesis of quantum materials is becoming a research hotspot as it determines their successful application in the fields of biomedicine, illumination, energy, sensors, information, and communication. Among the quantum materials, it is still a challenge to synthesize quantum wires (QWs) with surfactants due to the inevitable radial growth of QWs in the soft template method. In this paper, amphipathic graphene oxide (GO) was adopted as a macromolecular surfactant to limit the radial growth instead of the commonly used surfactant. GO could roll up under its electrostatic interaction with a cuprous oxide (Cu2O) quantum dot (QD) and then form a tubular template for the growth of the Cu2O QW, which was named herein as the nanoparticle-induced graphene oxide rolling (NIGOR) procedure. The NIGOR procedure was confirmed by the molecular dynamics results by simulating systems consisting of GO and Cu2O nanoparticles. An intermediate with a necklace morphology corresponding to the simulation result was also observed experimentally during the formation of the QW. Meanwhile, the formation mechanism of the QW was demonstrated rationally. Furthermore, increasing the dosage of the reactant, reaction time, and temperature altered the diameter of the QW from 2 to 4 nm and also changed the morphology of the final products from a QD to a QW and then to a bundle of QWs. This was attributed to the aggregation of materials for the lowest surface energy in the system. Additionally, the universality of NIGOR was manifested via the synthesis of other metal oxides as well. The NIGOR strategy provided an alternative, convenient, and mass production method for synthesizing QWs.

Room-Temperature and Humidity-Resistant Trace Nitrogen Dioxide Sensing of Few-Layer Black Phosphorus Nanosheet by Incorporating Zinc Oxide Nanowire.

Surmounting the issues of high-sensitivity and room-temperature detection toward trace NO2 gas is of paramount importance in the fields of human health and ultralow emission. Recently, black phosphorus (BP), a novel two-dimensional material, has gained considerable interest to achieve this goal. However, related work is far from satisfactory due to sluggish response, insufficient recovery, and fragile stability. In this scenario, we report on an inspiring NO2 sensor featuring composite film of few-layer BP nanosheets and zinc oxide (ZnO) nanowires serving as the sensing layer. Compared with BP-only counterpart, BP-ZnO sensor exhibited enhanced performance including boosted response (74% vs. 37.7% toward 50 ppb, which was among the best performances of BP involved NO2 sensors), accelerated response speed, better long-term stability, and strengthened humidity-repelling properties. In addition, excellent selectivity toward trace NO2 gas was revealed. These improvements could be ascribed into porous film, abundant sorption sites, numerous p-n heterojunctions, and passivation effect of ZnO nanowires on BP nanosheets. Furthermore, the proposed basic-solution assisted BP exfoliation favored film deposition, and enabled versatile composition design involving BP nanosheets in the future. In brief, the as-prepared BP-ZnO NO2 sensors paved the avenue for further BP applications and enriched its underlying transduction mechanism in gas sensing.

UV Illumination-Enhanced Molecular Ammonia Detection Based On a Ternary-Reduced Graphene Oxide-Titanium Dioxide-Au Composite Film at Room Temperature.

In this work, we report on UV illumination-enhanced room-temperature trace NH3 detection based on ternary composites of reduced graphene oxide nanosheets (rGO), titanium dioxide nanoparticles (TiO2), and Au nanoparticles as the sensing layer, which is the first reported so far. The effect of the UV state as well as componential combination and content on the sensing behavior disclosed that rGO nanosheets served not only as a template to attach TiO2 and Au but also as an effective electron collector and transporter, TiO2 nanoparticles acted as a dual UV and NH3 sensitive material, and Au nanoparticles could increase the sorption sites and promote charge separation of photoinduced electron-hole pairs. The as-prepared rGO/TiO2/Au sensors were endowed with a sensing response of 8.9% toward 2 ppm of NH3, a sensitivity of 1.43 × 10-2/ppm within the investigated range, nice selectivity, robust operation repeatability, and stability, which was fairly competitive in comparison with previous work. Meanwhile, the experimental results provided clear evidence of inspiring UV-enhanced gas detection catering for the future demand of low power-consumption and high sensitivity.

Nitrogen dioxide sensing based on multiple-morphology cuprous oxide mixed structures anchored on reduced graphene oxide nanosheets at room temperature.

Sensitive detection of trace nitrogen dioxide (NO2) gas at room temperature is of urgent necessity in the fields of healthcare and environment monitoring. To achieve this goal, we report on a porous composite film featuring reduced graphene oxide (rGO) nanosheets as the template platform of nanostructured cuprous oxide (Cu2O) nanowires and nanoparticles via a hydrothermal method. The sensor performance was investigated in terms of sensing response, optimal operation temperature, repeatability, long-term stability, selectivity and humidity effect on NO2 sensing. The sensor response achieved 0.66 towards 50 ppb NO2 gas with a full recovery at room temperature (25 °C ± 2 °C), which was among the best cases of Cu2O-related NO2 detection concerning sensor response and operation temperature. Moreover, a modest repeatability, stability, selectivity as well as a negligible humidity effect on NO2 sensing were exhibited. A mass of interspaces existing within nanostructured composites as well as the synergistic effect between rGO and Cu2O materials endowed the sensing layer with favorable gas accessibility and sufficient gas-solid interaction. Simultaneously, highly conductive rGO nanosheets facilitated an effective electron transfer and collection. In brief, the as-prepared rGO/Cu2O sensors showed a competitive room temperature detection capability for ppb-level NO2 gas, providing a vast potential in the future applications such as the real-time monitoring of ultralow emission.

Application of bi-directional long short-term memory in separating NO and SO2 ultraviolet differential absorption spectrum signals.

To safeguard the environment, it is crucial to monitor the emissions of nitrogen oxide (NO) and sulfur dioxide (SO2), harmful pollutants generated during fossil fuel combustion in industries. However, accurately measuring ultra-low concentrations of SO2 and NO remains a challenge. In this study, we developed an optical measurement system based on ultraviolet differential optical absorption spectroscopy (UV-DOAS) to address this issue. The 200-230 nm cross-sensitivity band was chosen for SO2 and NO. Experimental data with a mixed gas concentration range of 1-25 ppm for SO2 and NO was utilized. We proposed a fast algorithm based on Bi-directional Long Short-Term Memory (Bi-LSTM) to extract the differential optical density, overcoming the mutual interference between SO2 and NO. A nonlinear calibration model was employed to invert the separated differential absorption spectra and determine the gas concentrations. The results demonstrated a detection limit (DL) of 0.27 ppm and a full-scale error of 3.15 % for SO2, while for NO, the DL was 0.32 ppm and the full-scale error was 2.81 %. The uncertainties in SO2 and NO detection were calculated as 1.73 % and 1.96 %, respectively.

An Improved Seeker Optimization Algorithm for Phase Sensitivity Enhancement of a Franckeite- and WS2-Based SPR Biosensor for Waterborne Bacteria Detection.

For the purpose of detecting waterborne bacteria, a high-phase-sensitivity SPR sensor with an Ag-TiO2-Franckeite-WS2 hybrid structure is designed using an improved seeker optimization algorithm (ISOA). By optimizing each layer of sensor construction simultaneously, the ISOA guarantees a minimum reflectance of less than 0.01 by Ag (20.36 nm)-TiO2 (6.08 nm)-Franckeite (monolayer)-WS2 (bilayer) after 30 iterations for E. coli. And the optimal phase sensitivity is 2.378 × 106 deg/RIU. Sensor performance and computing efficiency have been greatly enhanced using the ISOA in comparison to the traditional layer-by-layer technique and the SOA method. This will enable sensors to detect a wider range of bacteria with more efficacy. As a result, the ISOA-based design idea could provide SPR biosensors with new applications in environmental monitoring.

Metal-Organic Framework-Derived Ni-Doped Indium Oxide Nanorods for Parts per Billion-Level Nitrogen Dioxide Gas Sensing at High Humidity.

Detecting parts per billion (ppb)-level nitrogen dioxide in high-moisture environments at room temperature without reducing sensing performance is a well-recognized significant challenge for metal oxide-based gas sensors. In this study, metal-organic framework-derived nickel-doped indium oxide (Ni-doped In2O3) mesoporous nanorods were prepared by a solvothermal method combined with the calcination process. The sensors prepared using the obtained Ni-doped In2O3 nanorods showcase an ultrahigh response, low detection limit, and excellent selectivity. Moreover, the abundant active sites triggered by nickel doping and the capillary enhancement effect caused by mesopores endow the sensor with ppb-level (20 ppb) NO2 detection capability in high-moisture environments (95% RH) at room temperature. With the increase in humidity, the carrier concentration of the sensor increases, and the nitric acid generated by nitrogen dioxide dissolved in water can be completely ionized in water and has high conductivity. Therefore, the gas response of the sensors increases with the increase in humidity. This study establishes a promising approach for the development of trace nitrogen dioxide-sensing devices that are resilient in high-humidity environments.

2D/2D Dy2O3 Nanosheet/MoO3 Nanoflake Heterostructures for Humidity-Independent and Sensitive Ammonia Detection.

Chemiresistive ammonia gas (NH3) sensors have been playing a significant role in the fields of environmental protection, food safety monitoring, and air quality evaluation. Nevertheless, balancing the high sensitivity and humidity tolerance remains challenging. Herein, the two-dimensional (2D) heterostructures of molybdenum trioxide (MoO3) nanoflakes decorated with dysprosium oxide (Dy2O3) nanosheets (termed Dy2O3/MoO3) were synthesized via a facile probe-sonication method. With respect to pristine MoO3 counterparts, the optimal Dy2O3/MoO3 sensors possessed a 4.49-fold larger response at a lower temperature (30.52@328.2 °C vs 6.8@369.7 °C toward 10 ppm of NH3), shorter response/recovery times (11.6/2.9 s vs 26.9/43.4 s), 52.6-fold higher sensitivity (17.35/ppm vs 0.33/ppm), and a lower theoretical detection limit (1.02 vs 32.82 ppb). Besides the nice reversibility, wide detection range (0.45-100 ppm) and robust long-term stability, inspiringly, the Dy2O3/MoO3 sensors showed a nearly humidity-independent response. These impressive improvements in the NH3-sensing performance were attributed to numerous heterojunctions to strengthen the carrier concentration modulation and the compensation/protection effect of Dy2O3 to mitigate the humidity effect. Moreover, the Dy2O3/MoO3 sensors showed preliminary application potential in monitoring pork freshness. This work provides a universal methodology for constructing NH3 gas sensors with high sensitivity and good humidity resistance and probably extends the application scenarios of MoO3-based sensors in the Internet of Things in the future.

Topological insulator Bi2Se3 for highly sensitive, selective and anti-humidity gas sensors.

Chemiresistive gas sensors generally surfer from low selectivity, inferior anti-humidity, low response signal or signal-to-noise ratio, severely limiting the precise detection of chemical agents. Herein, we exploit high-performance gas sensors based on topological insulator Bi2Se3 that is distinguished from conventional materials by robust metallic surface states protected by time-reversal symmetry. In the presence of Se vacancies, Bi2Se3 nanosheets exhibit excellent gas sensing capability toward NO2, with a high response of 93% for 50 ppm and an ultralow theoretical limit of detection concentration about 0.06 ppb at room temperature. Remarkably, Bi2Se3 demonstrates ultrahigh anti-humidity interference characteristics, as the response with standard deviation of only 3.63% can be achieved in relative humidity range of 0-80%. These findings are supported by first-principles calculations, with analyses on adsorption energy and charge transfer directly revealing the anti-humidity and selectivity. This work may pave the way for implementation of exotic quantum states for intelligent applications.

Mesoporous WS2/MoO3 Hybrids for High-Performance Trace Ammonia Detection.

Mesoporous WS2/MoO3 hybrids were synthesized by a facile two-step and additive-free hydrothermal approach and employed for high-performance trace ammonia gas (NH3) detection. Compared with single WS2 and MoO3 counterparts, WS2/MoO3 sensors exhibited an improvement in NH3-sensing performance at room temperature (22 ± 3 °C). Typically, the optimal WS2/MoO3 sensor showed a higher and quicker response of 31.58% within 57 s toward 3 ppm of NH3, which was 17.7- and 57.4-fold larger than that of pure MoO3 (1.78% within 251 s) and WS2 (0.55% within 153 s) ones. Meanwhile, good reversibility, sensitivity, and selectivity, reliable long-term stability, and the lowest detection limit of 9.0 ppb were achieved. These superior properties were probably ascribed to numerous heterojunctions favorable for additional carrier-concentration modulation via the synergetic effect between WS2 and MoO3 components and the large specific surface area beneficial for richer sorption sites and faster molecular transfer at room temperature. Such achievements also imply that the designed WS2/MoO3 heterostructure nanomaterials have the potential in achieving trace NH3 recognition catering for the requirements of high sensitivity and low power consumption in future gas sensors.

An ultra-sensitive detection system for sulfur dioxide and nitric oxide based on improved differential optical absorption spectroscopy method.

A highly sensitive detection system for sulfur dioxide (SO2) and nitric oxide (NO) was developed via deep ultraviolet differential optical absorption spectroscopy (DUV-DOAS). The wavelength range of 200-230 nm was used which was rarely used before as result of severe cross sensitivity to SO2 and NO, in this work, this problem was overcame. A system detection limit (DL) of 60 ppb for SO2 has been reached which was among the best ones. Meanwhile, a novel method based on spectrum superposition theory was proposed to decompose the differential optical density (DOD) of NO from that of gas mixture in cross sensitive band. The advantage of this method is that the most sensitive absorption peak of NO was used, which cannot be used by conventional methods due to the cross sensitive to SO2. A system DL of 7 ppb for NO has been achieved which is among the best ones reported before. Furthermore, the effect of gas temperature and humidity on concentration retrieval has also been studied, gas temperature and humidity compensation models have also been proposed. The experimental results show that the compensation models succeed in compensating the deviation caused by gas temperature and humidity. The environmental adaptability of the system has been enhanced. This work achieves the aim of monitoring ultra-low concentration of SO2 and NO in a complex environment simultaneously.

[The study of cervical cancer cells model based on UV absorption spectrum].

Cell cycle is the most important process in life, and embodies all the physiological processes in the cell. In order to reflect the process of cell growth simply and accurately, the authors took cell cycle into account when the Hela cell spectral model was designed. The artificially induced cell synchronization method was employed to make Hela cell in G1, S, G2 and M phases of the cell cycle. The UV absorption spectra of these Hela cell samples were measured. The absorbability of aromatic amino acid, protein and nucleic acid in different stages of the cell cycle showed the changes in cell cycle. The subsection linear regression model of cell UV absorption spectrum was designed according to the relationship between the stage and the absorbance of samples in different phase at 204 and 260 nm. The models can be used to estimate the cell cycle after experimental verification and provide a new method for analyzing cell cycle and building cell model.

Polarization-insensitive colorful meta-holography employing anisotropic nanostructures.

Benefiting from advances in nanofabrication technology, emerging metasurfaces are promising for compact and wearable multicolor meta-holograms with large fields of view. However, due to the inherent electromagnetic properties of the structures that are used, current multicolor meta-holograms are often sensitive to the incident light polarization, which greatly restricts the application of meta-holography. Here, we took advantage of the amplitude properties of metasurfaces and the off-axis illumination method to carry out experiments involving polarization-insensitive colorful meta-holography with anisotropic nanostructures. With red, green and blue lasers illuminating the meta-hologram along different angles, a polarization-insensitive colorful holographic image was achieved and the disturbance from zero-order diffraction light was essentially eliminated. To the best of our knowledge, the current work was the first time that a polarization-insensitive colorful meta-hologram with anisotropic nanostructures was experimentally demonstrated. We expect our approach to provide promising prospects for the use of metasurfaces in applications such as flat meta-lenses, data storage and virtual/augmented reality.

[Research of ventricular late potentials detection based on approximate entropy analysis].

We present an analysis method of electrocardiogram (ECG) to determine patients' ventricular late potentials (VLPs) characteristics by means of wavelet packet transform and entropy (ApEn). The results indicate that the patients with VLPs tend to have higher ApEn values than do those without. So ApEn can be used as an indicator and a BP neural network for distinguishing between the two patient groups. The experiment result shows that this method has higher distinguishability.