New regression equations for mixed dentition space analysis in Nepalese mongoloids.

BACKGROUND: Mixed dentition space analysis methods using regression equations, namely, Moyers' analysis and Tanaka-Johnston analysis are commonly used around the world. However, the applicability of these analyses among different racial groups have been questioned. The primary objective of this study was to assess the applicability of the Moyers' and Tanaka-Johnston analyses among Nepalese Mongoloids and to develop regression equations for the same population if needed. METHODS: One hundred (50 males and 50 females) pre-treatment study models of the Nepalese Mongoloid patients undergoing orthodontic treatment were retrieved from the archives of the department of Orthodontics. The mesiodistal widths of mandibular incisors and widths of canines and premolars of all 4 quadrants were measured by a single investigator using a digital caliper to the nearest 0.01 mm. Predicted widths of canines and premolars were obtained using standard Moyers' and Tanaka-Johnston analyses and then compared with the measured widths. RESULTS: The measured widths of canines and premolars were significantly different from the predicted widths obtained from Moyers' and Tanaka-Johnston analyses. Strong and positive correlations were found between the sum of mesiodistal widths of mandibular incisors and the sum of mesiodistal widths of canines and premolars in males (0.73 for maxillary arch and 0.68 for mandibular arch) and females (0.64 for maxillary arch and 0.79 for mandibular arch). CONCLUSIONS: The Moyers' and Tanaka-Johnston analyses did not accurately predict the mesiodistal width of unerupted canines and premolars for Nepalese Mongoloid population. Hence, new regression equations have been developed for this population. However, validation studies should be conducted to confirm the applicability and accuracy of these equations.

The morphology and bridging of the sella turcica in adult orthodontic patients.

BACKGROUND: The purpose of this study was to determine and compare the shapes, sizes, and bridging of the sella turcica in patients with different skeletal patterns and genders. METHODS: It was a cross-sectional comparative study. The samples were divided into three groups according to the skeletal pattern viz. Class I, Class II and Class III, and each group consisted of 40 samples (20 males and 20 females). The lateral cephalograms were traced and the sella turcica was assessed for its size, shape, and bridging. RESULTS: The mean length, anteroposterior diameter and depth of sella turcica were 8.13 ± 2.03 mm, 9.60 ± 1.43 mm and 6.40 ± 1.21 mm respectively. The mean length of sella turcica was 7.91 ± 1.52 mm in Class I, 7.32 ± 1.62 mm in Class II and 9.16 ± .2.42 in Class III skeletal pattern; anteroposterior diameter was 9.30 ± 1.02 mm in Class I, 9.15 ± 1.28 mm in Class II and 10.35 ± 1.64 mm in Class III skeletal pattern; and the depth was 6.40 ± 0.92 mm in Class I, 6.07 ± 1.01 mm in Class II and 6.74 ± .1.54 mm in Class III skeletal pattern. There were significant differences in length and anteroposterior diameter and sella turcica between Class I, Class II and Class III skeletal patterns (p = 0.01), (p = 0.01) respectively. There was no significant difference in size of sella turcica between different genders and age groups. Sixty percent of the patients studied had normal Sella morphology. Partial Sella turcica bridging and Sella turcica bridging was seen in this study in 23.33% and 11.67% of patients respectively. CONCLUSION: Sixty percent of the patients had normal sella turcica. There were significant differences in lengths and anteroposterior diameters among Class I, Class II and Class III patients. The larger size was present in skeletal Class III patients.

Mixed dentition space analysis among Nepalese Brahmins/Chhetris.

BACKGROUND: Mixed dentition space analysis forms an important part of orthodontic diagnosis and treatment planning. Regression equations are widely used for mixed dentition analysis which can vary among races. This study aimed to find out the new regression equation in estimating the size of unerupted canines and premolars for Nepalese Brahmins/Chhetris. METHODS: Hundred Nepalese Brahmins/Chhetris (50 males and 50 females) who met our criteria were selected among the patients attending to the Orthodontic Out-Patient Department, Institute of Medicine, Kathmandu. The mesiodistal widths of all mandibular permanent incisors; maxillary and mandibular canines and premolars were measured and analyzed. The results were also compared with predicted values from the Moyers and the Tanaka and Johnston methods. Correlation and linear regression analyses were performed between the predicted and actual tooth sizes for Nepalese Brahmins/Chhetris and standard regression equations were developed. RESULTS: No significant differences were observed when the sum of canine and premolars of one quadrant is compared between sides and sex. Significant and high positive correlations were found between the mandibular incisors and the combined mesiodistal widths of the canines and premolars for the maxillary (r = 0.72) and mandibular (r = 0.73) segments. Significant differences were observed between the measured values from this study and from Moyers (50 % and 75 % probability) and Tanaka-Johnston methods. CONCLUSIONS: The equations and charts commonly used for North American children (50(th) or 75(th) percentile) did not accurately predict for our sample, so new regression equations and tables were developed for Nepalese Brahmins/Chhetris children.

An Effective Technique for Minor Rotation Correction.

INTRODUCTION: Although ratated teeth are easier to correct and difficult to retain, sometimes they pose a great challenge to the clinician. Play between the arch wire and the bracket slot, and the method of ligation affect full correction of rotation. Various techniques have been described for correction of rotation, but this paper describes a simpler approach with resilient arch wire, elastic module, and metallic ligature wire. TECHNIQUE: The effective correction of rotation is achieved with figure-8 tie in one of the wings under the resilient archwire which is further ligated to the bracket in the other wing giving wedging effect correcting minor rotations easily with over-correction. DISCUSSION: This technique is easy to apply in day-to-day clinicalpractice without any extra inventories.

A Retrospective Study Comparing Nose, Lip, and Chin Morphology in Class I, Class II, and Class III Skeletal Relationships in Patients Visiting to the Department of Orthodontics, BPKIHS: A Cephalometric Study.

Background: With the changing paradigm from primarily hard tissue to soft tissue evaluation for orthodontic diagnosis and treatment planning, the priority has shifted to bring about improvement in the profile and smile characteristics of patients. Since not only the esthetics but also the stability of orthodontic treatment is largely determined by the soft tissue envelope, proper positioning of the soft tissue drape becomes paramount. Soft tissues of face, namely, nose, lips, and chin, are of paramount importance not only from an esthetic but also from functional and treatment stability points. Objective: To determine the morphological variation of lips, nose, and chin in different skeletal malocclusions. Materials and Methods: Lateral cephalograms of 237 patients visiting the department of orthodontics, BPKIHS, were taken, hand traced on matt acetate tracing paper of 0.002″ thickness with 0.3-mm 2B pencil. Samples were divided into 3 skeletal classes based on ANB angle. Measurements were made in relation to the nose, lips, and chin. Data were inserted in to SPSS and analyzed statistically using descriptive statistics, and mean and standard deviation was calculated for each variable. Multiple comparison between groups was done with post hoc Bonferroni test with mean difference significant at p < 0.05. Result: On intergroup comparison, a significant difference was found for upper lip thickness (ULT) between Class II and Class III, and lower lip length (LLL) between Class I and Class III, and between Class II and Class III. Significant difference for nasolabial angle (NLA) was found between Class II and Class III. Similarly, a significant difference for the vertical chin parameter (CTV) was found between Class I and Class III, and between Class II and Class III. Conclusion: Both upper and lower lip thicknesses were highest for Class III followed by Class I and Class II, respectively. Lip lengths too were found to be highest for Class III skeletal relation. Nasolabial angle was larger in Class II malocclusion when compared to Class I and Class III. Similarly, both nasal length and nasal height measurements were in the order of Class III > Class II > Class I. Both horizontal and vertical chin parameters were larger for Class III sagittal relation.

Orthodontic Management in Aggressive Periodontitis.

Aggressive periodontitis is a type of periodontitis with early onset and rapid progression and mostly affecting young adults who occupy a large percentage of orthodontic patients. The role of the orthodontist is important in screening the disease, making a provisional diagnosis, and referring it to a periodontist for immediate treatment. The orthodontist should be aware of the disease not only before starting the appliance therapy, but also during and after the active mechanotherapy. The orthodontic treatment plan, biomechanics, and appliance system may need to be modified to deal with the teeth having reduced periodontal support. With proper force application and oral hygiene maintenance, orthodontic tooth movement is possible without any deleterious effect in the tooth with reduced bone support. With proper motivation and interdisciplinary approach, orthodontic treatment is possible in patients with controlled aggressive periodontitis.

How common is ponticulus posticus on lateral cephalograms?

BACKGROUND: Ponticulus posticus is an anomaly of first cervical vertebra visible on lateral cephalogram and has some serious medical and surgical implications. Unfortunately, it is often overlooked or undetected by orthodontists. The general objective of this study is to sensitize orthodontists about this anomaly by depicting its prevalence among a group of Nepalese orthodontic patients. METHODS: Four hundred and fourteen digital lateral cephalograms of orthodontic patients were retrieved from the archives of the department. The lateral cephalograms were carefully assessed for the presence of ponticulus posticus in the posterior spine of atlas vertebra by two investigators independently and the findings were recorded. RESULTS: Ponticulus posticus was observed in 35.7% of the cases, of which 30.9% had partial ponticulus posticus and 4.8% had complete ponticulus posticus. Even though there was some female predilection, no statistically significant association was found between gender of the patient and presence of ponticulus posticus. CONCLUSION: Ponticulus posticus is a fairly common anomaly with more than one-third (35.7%) of a group of Nepalese orthodontic patients affected and is independent of gender. Since, this anomaly is associated with numerous medical conditions and has surgical implications, orthodontists should use lateral cephalogram as screening radiograph for this anomaly.

Translation and Validation of Modified Dental Anxiety Scale: The Nepali Version.

Introduction. For proper management of anxious dental patients it is imperative to assess their levels of dental anxiety before treatment. Modified Dental Anxiety Scale (MDAS) is the most commonly used questionnaire to assess dental anxiety. But a Nepali version of MDAS is still lacking. Hence, the objective of this study was to develop a reliable and valid Nepali version of MDAS. Materials and Methods. The English version of the MDAS was translated into Nepali following a forward and backward translation process. Following pretesting and cognitive interviewing a final version of Nepali questionnaire was obtained. One hundred and fifty patients attending Department of Orthodontics completed the Nepali version of MDAS questionnaire at their convenience. Also, patients were asked to rate their overall anxiety on a 100 mm visual analog scale (VAS). A test-retest of the questionnaire was performed with 30 patients after 2 weeks. Results. Cronbach's alpha value of the Nepali version of MDAS was 0.775. The Intraclass Correlation Coefficient between test and retest was 0.872. Spearman's correlation coefficient between the total MDAS score and VAS score was 0.838. Conclusion. The translated Nepali version of MDAS is a reliable and valid instrument to measure the dental anxiety of Nepali patients.

Effect of Subject Rotation on Assessment of Esthetic Dental Ratios: A Simulation Study.

Objective. This study aimed to find out the change in esthetic ratios during rotation of patient's head using a simulation. Materials and Methods. A plaster study model was photographed placing its midline along the long axis of the camera. Then a series of photographs were taken by rotating the model each degree till 10° on both right and left sides. These photographs were digitally measured and the ratio of the maxillary anterior teeth at zero-degree rotation was compared with that at various degrees of rotation. Results. As the model was rotated to the right side till 10°, the ratio of the right lateral to central incisor gradually decreased while the ratio of the left lateral to central incisor gradually increased. However, the ratio of the canine to lateral incisor on both sides gradually increased. Similar results were obtained when the model was rotated to the left side. The ratio of the lateral to central incisor deviated from the acceptable range (±10%) when there was rotation of more than 7°, whereas the ratio of the canine to lateral incisor was within the acceptable range till 10° rotation on either side. Conclusions. Rotation of the model by more than 7° leads to a substantial change in the esthetic ratio.