Synergistic Layered Design of Aerogel Nanocomposite of Graphene Nanoribbon/MXene with Tunable Absorption Dominated Electromagnetic Interference Shielding.

Electromagnetic pollution presents growing challenges due to the rapid expansion of portable electronic and communication systems, necessitating lightweight materials with superior shielding capabilities. While prior studies focused on enhancing electromagnetic interference (EMI) shielding effectiveness (SE), less attention is given to absorption-dominant shielding mechanisms, which mitigate secondary pollution. By leveraging material science and engineering design, a layered structure is developed comprising rGOnR/MXene-PDMS nanocomposite and a MXene film, demonstrating exceptional EMI shielding and ultra-high electromagnetic wave absorption. The 3D interconnected network of the nanocomposite, with lower conductivity (10-3-10-2 S/cm), facilitates a tuned impedance matching layer with effective dielectric permittivity, and high attenuation capability through conduction loss, polarization loss at heterogeneous interfaces, and multiple scattering and reflections. Additionally, the higher conductivity MXene layer exhibits superior SE, reflecting passed electromagnetic waves back to the nanocomposite for further attenuation due to a π/2 phase shift between incident and back-surface reflected electromagnetic waves. The synergistic effect of the layered structures markedly enhances total SE to 54.1 dB over the Ku-band at a 2.5 mm thickness. Furthermore, the study investigates the impact of hybridized layered structure on reducing the minimum required thickness to achieve a peak absorption (A) power of 0.88 at a 2.5 mm thickness.

Enhanced electrical properties of microcellular polymer nanocomposites via nanocarbon geometrical alteration: a comparison of graphene nanoribbons and their parent multiwalled carbon nanotubes.

Geometric factors of nanofillers considerably govern the properties of conductive polymer composites (CPCs). This study provides insights into how geometrical alteration through nanotube-to-nanoribbon conversion affects the electrical properties of solid and microcellular CPCs. In this regard, polyvinylidene fluoride (PVDF)-based nanocomposites are synthesized using both the parent multi-walled carbon nanotube (MWCNT) and its chemically unzipped product, i.e., graphene nanoribbons (GNRs). Theoretical and experimental results show that GNR-based composites exhibit 1-4 orders greater conductivities than MWCNT-based composites at the same filler loading because of the larger number of filler-filler junctions as well as the significantly greater contact areas. On the other hand, the conductivities of MWCNT-based and GNR-based composites are significantly increased by 230 times and 121 times, respectively, through microcellular foaming. The effective rearrangements of rigid MWCNTs and flexible GNRs (having 4 and 5 orders less bending stiffness) for network formation during cellular growth are compared. The GNR-based composites also exhibit a superior dielectric permittivity (e.g., 2.6 times larger real permittivity at a representative frequency of 103 Hz and a nanofiller loading of 4.2 vol%) compared to their MWCNT-based counterparts. This study demonstrates how the modification of the carbon fillers and the polymer matrix can dramatically enhance EMI shielding.

Thin Film Polyamide Nanocomposite Membrane Decorated by Polyphenol-Assisted Ti3C2Tx MXene Nanosheets for Reverse Osmosis.

Transition-metal carbides (MXenes), multifunctional 2D materials, have caught the interest of researchers in the fabrication of high-performance nanocomposite membranes. However, several issues regarding MXenes still remain unresolved, including low ambient stability; facile restacking and agglomeration; and poor compatibility and processability. To address the aforementioned challenges, we proposed a facile, green, and cost-efficient approach for coating a stable layer of plant-derived polyphenol tannic acid (TA) on the surface of MXene (Ti3C2Tx) nanosheets. Then, high-performance reverse osmosis polyamide thin film nanocomposite (RO-PA-TFN) membranes were fabricated by the incorporation of modified MXene (Ti3C2Tx-TA) nanosheets in the polyamide selective layer through interfacial polymerization. The strong negative charge and hydrophilic multifunctional properties of TA not only boosted the chemical compatibility between Ti3C2Tx MXene nanosheets and the polyamide matrix to overcome the formation of nonselective voids but also generated a tight network with selective interfacial pathways for efficient monovalent salt rejection and water permeation. In comparison to the neat thin film composite membrane, the optimum TFN (Ti3C2Tx-TA) membrane with a loading of 0.008 wt % nanofiller revealed a 1.4-fold enhancement in water permeability, a well-maintained high NaCl rejection rate of 96% in a dead-end process, and enhanced anti-fouling tendency. This research offers a facile way for the development of modified MXene nanosheets to be successfully integrated into the polyamide-selective layer to improve the performance and fouling resistance of TFN membranes.

Greatly Enhanced Electromagnetic Interference Shielding Effectiveness and Mechanical Properties of Polyaniline-Grafted Ti3C2Tx MXene-PVDF Composites.

Nowadays, evolutions in wireless telecommunication industries, such as the emergence of complex 5G technology, occur together with massive development in portable electronics and wireless systems. This positive progress has come at the expense of significant electromagnetic interference (EMI) pollution, which requires the development of highly efficient shielding materials with low EM reflection. The manipulation of MXene surface functional groups and, subsequently, incorporation into engineered polymer matrices provide mechanisms to improve the electromechanical performance of conductive polymer composites (CPCs) and create a safe EM environment. Herein, Ti3C2Tx MXene nanoflakes were first synthesized and then, taking advantage of their abundant surface functional groups, polyaniline (PA) nanofibers were grafted onto the MXene surface via oxidant-free oxidative polymerization at two different MXene to monomer ratios. The electrical conductivity, EMI shielding effectiveness (SE), and mechanical properties of poly (vinylidene fluoride) (PVDF)-based CPCs at different nanomaterial loadings were then thoroughly investigated. A very low percolation threshold of 1.8 vol % and outstanding electrical conductivities of 0.23, 0.195, and 0.17 S/cm were obtained at 6.9 vol % loading for PVDF-MXene, PVDF-MX2AN1, and PVDF-MX1AN1, respectively. Compared to the pristine MXene composite, surface modification significantly enhanced the EMI SE of the PVDF-MX2AN1 and PVDF-MX1AN1 composites by 19.6 and 32.7%, respectively. The remarkable EMI SE enhancement of the modified nanoflakes was attributed to (i) the intercalation of PA nanofibers between MXene layers, resulting in better nanoflake exfoliation, (ii) a large amount of dipole and interfacial polarization dissipation by constructing capacitor-like structures between nanoflakes and polymer chains, and (iii) augmented EMI attenuation via conducting PA nanofibers. The surface modification of the MXene nanoflakes also enhanced the interfacial interactions between PVDF chains and nanoflakes, which resulted in an improved Young's modulus of the PVDF matrix by about 67 and 46% at 6.9 vol % loading for PVDF-MX2AN1 and PVDF-MX1AN1 composites, respectively.