RESUMO
Although the dehydrogenation chemistry of amine-boranes substituted at nitrogen has attracted considerable attention, much less is known about the reactivity of their B-substituted analogues. When the B-methylated amine-borane adducts, RR'NH·BH2Me (1a: R = R' = H; 1b: R = Me, R' = H; 1c: R = R' = Me; 1d: R = R' = iPr), were heated to 70 °C in solution (THF or toluene), redistribution reactions were observed involving the apparent scrambling of the methyl and hydrogen substituents on boron to afford a mixture of the species RR'NH·BH3-xMex (x = 0-3). These reactions were postulated to arise via amine-borane dissociation followed by the reversible formation of diborane intermediates and adduct reformation. Dehydrocoupling of 1a-1d with Rh(I), Ir(III), and Ni(0) precatalysts in THF at 20 °C resulted in an array of products, including aminoborane RR'NâBHMe, cyclic diborazane [RR'N-BHMe]2, and borazine [RN-BMe]3 based on analysis by in situ (11)B NMR spectroscopy, with peak assignments further supported by density functional theory (DFT) calculations. Significantly, very rapid, metal-free hydrogen transfer between 1a and the monomeric aminoborane, iPr2NâBH2, to yield iPr2NH·BH3 (together with dehydrogenation products derived from 1a) was complete within only 10 min at 20 °C in THF, substantially faster than for the N-substituted analogue MeNH2·BH3. DFT calculations revealed that the hydrogen transfer proceeded via a concerted mechanism through a cyclic six-membered transition state analogous to that previously reported for the reaction of the N-dimethyl species Me2NH·BH3 and iPr2NâBH2. However, as a result of the presence of an electron donating methyl substituent on boron rather than on nitrogen, the process was more thermodynamically favorable and the activation energy barrier was reduced.
RESUMO
The catalyst loading is the key to control the molecular weight of the polymer in the iron-catalyzed dehydropolymerization of phosphine-borane adducts. Studies showed that the reaction proceeds through a chain-growth coordination-insertion mechanism.
RESUMO
Palladium(II) acetate is readily converted into [Pd3 (µ(2) -OH)(OAc)5 ] (1) in the presence of water in a range of organic solvents and is also slowly converted in the solid state. Complex 1 can also be formed in nominally anhydrous solvents. Similarly, the analogous alkoxide complexes [Pd3 (µ(2) -OR)(OAc)5 ] (3) are easily formed in solutions of palladium(II) acetate containing a range of alcohols. An examination of a representative Wacker-type oxidation shows that the Pd-OH complex 1 and a related Pd-oxo complex 4 can be excluded as potential catalytic intermediates in the absence of exogenous water.
RESUMO
We report the synthesis, reactivity studies, and ring-opening polymerization of a tricarba[3]nickelocenophane. The resulting green polynickelocene (5) possesses a -(CH2)3- spacer between the nickelocene units and is shown to be of high molecular weight. SQUID magnetometry measurements indicate that 5 is a macromolecular material with an S = 1 repeat unit.
RESUMO
In contrast to ruthenocene [Ru(η(5) -C5 H5 )2 ] and dimethylruthenocene [Ru(η(5) -C5 H4 Me)2 ] (7), chemical oxidation of highly strained, ring-tilted [2]ruthenocenophane [Ru(η(5) -C5 H4 )2 (CH2 )2 ] (5) and slightly strained [3]ruthenocenophane [Ru(η(5) -C5 H4 )2 (CH2 )3 ] (6) with cationic oxidants containing the non-coordinating [B(C6 F5 )4 ](-) anion was found to afford stable and isolable metalmetal bonded dicationic dimer salts [Ru(η(5) -C5 H4 )2 (CH2 )2 ]2 [B(C6 F5 )4 ]2 (8) and [Ru(η(5) -C5 H4 )2 (CH2 )3 ]2 [B(C6 F5 )4 ]2 (17), respectively. Cyclic voltammetry and DFT studies indicated that the oxidation potential, propensity for dimerization, and strength of the resulting RuRu bond is strongly dependent on the degree of tilt present in 5 and 6 and thereby degree of exposure of the Ru center. Cleavage of the RuRu bond in 8 was achieved through reaction with the radical source [(CH3 )2 NC(S)SSC(S)N(CH3 )2 ] (thiram), affording unusual dimer [(CH3 )2 NCS2 Ru(η(5) -C5 H4 )(η(3) -C5 H4 )C2 H4 ]2 [B(C6 F5 )4 ]2 (9) through a haptotropic η(5) -η(3) ring-slippage followed by an apparent [2+2] cyclodimerization of the cyclopentadienyl ligand. Analogs of possible intermediates in the reaction pathway [C6 H5 ERu(η(5) -C5 H4 )2 C2 H4 ][B(C6 F5 )4 ] [E=S (15) or Se (16)] were synthesized through reaction of 8 with C6 H5 EEC6 H5 (E=S or Se).
RESUMO
The reactions of iron chlorides with mesityl Grignard reagents and tetramethylethylenediamine (TMEDA) under catalytically relevant conditions tend to yield the homoleptic "ate" complex [Fe(mes)3 ](-) (mes=mesityl) rather than adducts of the diamine, and it is this ate complex that accounts for the catalytic activity. Both [Fe(mes)3 ](-) and the related complex [Fe(Bn)3 ](-) (Bn=benzyl) react faster with representative electrophiles than the equivalent neutral [FeR2 (TMEDA)] complexes. Fe(I) species are observed under catalytically relevant conditions with both benzyl and smaller aryl Grignard reagents. The X-ray structures of [Fe(Bn)3 ](-) and [Fe(Bn)4 ](-) were determined; [Fe(Bn)4 ](-) is the first homoleptic σ-hydrocarbyl Fe(III) complex that has been structurally characterized.
RESUMO
Linear diborazanes R3N-BH2-NR2-BH3 (R = alkyl or H) are often implicated as key intermediates in the dehydrocoupling/dehydrogenation of amine-boranes to form oligo- and polyaminoboranes. Here we report detailed studies of the reactivity of three related examples: Me3N-BH2-NMe2-BH3 (1), Me3N-BH2-NHMe-BH3 (2), and MeNH2-BH2-NHMe-BH3 (3). The mechanisms of the thermal and catalytic redistributions of 1 were investigated in depth using temporal-concentration studies, deuterium labeling, and DFT calculations. The results indicated that, although the products formed under both thermal and catalytic regimes are identical (Me3N·BH3 (8) and [Me2N-BH2]2 (9a)), the mechanisms of their formation differ significantly. The thermal pathway was found to involve the dissociation of the terminal amine to form [H2B(µ-H)(µ-NMe2)BH2] (5) and NMe3 as intermediates, with the former operating as a catalyst and accelerating the redistribution of 1. Intermediate 5 was then transformed to amine-borane 8 and the cyclic diborazane 9a by two different mechanisms. In contrast, under catalytic conditions (0.3-2 mol % IrH2POCOP (POCOP = κ(3)-1,3-(OPtBu2)2C6H3)), 8 was found to inhibit the redistribution of 1 by coordination to the Ir-center. Furthermore, the catalytic pathway involved direct formation of 8 and Me2NâBH2 (9b), which spontaneously dimerizes to give 9a, with the absence of 5 and BH3 as intermediates. The mechanisms elucidated for 1 are also likely to be applicable to other diborazanes, for example, 2 and 3, for which detailed mechanistic studies are impaired by complex post-redistribution chemistry. This includes both metal-free and metal-mediated oligomerization of MeNHâBH2 (10) to form oligoaminoborane [MeNH-BH2]x (11) or polyaminoborane [MeNH-BH2]n (16) following the initial redistribution reaction.
RESUMO
The chiral sulfide, isothiocineole, has been synthesized in one step from elemental sulfur, γ-terpinene, and limonene in 61% yield. A mechanism involving radical intermediates for this reaction is proposed based on experimental evidence. The application of isothiocineole to the asymmetric epoxidation of aldehydes and the aziridination of imines is described. Excellent enantioselectivities and diastereoselectivities have been obtained over a wide range of aromatic, aliphatic, and α,ß-unsaturated aldehydes using simple protocols. In aziridinations, excellent enantioselectivities and good diastereoselectivities were obtained for a wide range of imines. Mechanistic models have been put forward to rationalize the high selectivities observed, which should enable the sulfide to be used with confidence in synthesis. In epoxidations, the degree of reversibility in betaine formation dominates both the diastereoselectivity and the enantioselectivity. Appropriate tuning of reaction conditions based on understanding the reaction mechanism enables high selectivities to be obtained in most cases. In aziridinations, betaine formation is nonreversible with semistabilized ylides and diastereoselectivities are determined in the betaine forming step and are more variable as a result.
RESUMO
Previous work has shown that certain steroidal bis-(N-phenyl)ureas, derived from cholic acid, form crystals in the P6(1) space group with unusually wide unidimensional pores. A key feature of the nanoporous steroidal urea (NPSU) structure is that groups at either end of the steroid are directed into the channels and may in principle be altered without disturbing the crystal packing. Herein we report an expanded study of this system, which increases the structural variety of NPSUs and also examines their inclusion properties. Nineteen new NPSU crystal structures are described, to add to the six which were previously reported. The materials show wide variations in channel size, shape, and chemical nature. Minimum pore diameters vary from ~0 up to 13.1 Å, while some of the interior surfaces are markedly corrugated. Several variants possess functional groups positioned in the channels with potential to interact with guest molecules. Inclusion studies were performed using a relatively accessible tris-(N-phenyl)urea. Solvent removal was possible without crystal degradation, and gas adsorption could be demonstrated. Organic molecules ranging from simple aromatics (e.g., aniline and chlorobenzene) to the much larger squalene (M(w) = 411) could be adsorbed from the liquid state, while several dyes were taken up from solutions in ether. Some dyes gave dichroic complexes, implying alignment of the chromophores in the NPSU channels. Notably, these complexes were formed by direct adsorption rather than cocrystallization, emphasizing the unusually robust nature of these organic molecular hosts.
RESUMO
We make the case for benzo[c]quinolin-6-ylidene (1) as a strongly electron-donating carbene ligand. The facile synthesis of 6-trifluoromethanesulfonylbenzo[c]quinolizinium trifluoromethanesulfonate (2) gives straightforward access to a useful precursor for oxidative addition to low-valent metals, to yield the desired carbene complexes. This concept has been achieved in the case of [Mn(benzo[c]quinolin-6-ylidene)(CO)5](+) (15) and [Pd(benzo[c]quinolin-6-ylidene)(PPh3)2(L)](2+) L = THF (21), OTf (22) or pyridine (23). Attempts to coordinate to nickel result in coupling products from two carbene precursor fragments. The CO IR-stretching-frequency data for the manganese compound suggests benzo[c]quinolin-6-ylidene is at least as strong a donor as any heteroatom-stabilised carbene ligand reported.
RESUMO
A new bulky facially coordinating N3-donor tach-based ligand (tach: cis,cis-1,3,5-triaminocyclohexane) [1: cis,cis-1,3,5-tris(2-fluoro-6-(trifluoromethyl)benzylideneamino)cyclohexane] has been obtained from the condensation of tach with 3 equiv of the appropriate benzaldehyde. Reaction of 1 with [Cu(NCMe)4][PF6] gave the complex [(1)Cu(NCMe)][PF6]. Displacement of the acetonitrile ligand is possible with CO and C2H4 (3-5 bar). Cu(I)-ethylene complexes of ligands 1 and 2 [2: cis,cis-1,3,5-(mesitylideneamino)cyclohexane] were prepared successfully by treatment of the ligands with CuBr and AgSbF6 in the presence of ethylene. These complexes display reversible complexation of the ethylene molecule under mild changes to pressure, suggesting possible application in olefin separation and extraction.
Assuntos
Complexos de Coordenação/síntese química , Cobre/química , Etilenos/química , Benzaldeídos/química , Cicloexilaminas/química , Iminas/química , Metaloproteínas/química , Modelos Moleculares , Mimetismo Molecular , Estrutura MolecularRESUMO
The synthesis of the salt 3 and metallo-organic framework (MOF) [{(4,4(')-bipy)CoBr(2)}(n)] 4 by a range of solid state (mechanochemical and thermochemical) and solution methods is reported; they are isostructural with their respective chloride analogues 1 and 2. 3 and 4 can be interconverted by means of HBr elimination and absorption. Single phases of controlled composition and general formula [4,4(')-H(2)bipy][CoBr(4-x)Cl(x)] 5(x) may be prepared from 2 and 4 by solid--gas reactions involving HBr or HCl respectively. Crystalline single phase samples of 5(x) and [{(4,4(')-bipy)CoBr(2-x)Cl(x)}(n)] 6(x) were prepared by solid-state mechanochemical routes, allowing fine control over the composition and unit cell volume of the product. Collectively these methods enable continuous variation of the unit cell dimensions of the salts [4,4(')-H(2)bipy][CoBr(4-x)Cl(x)] (5(x)) and the MOFs [{(4,4(')-bipy)CoBr(2-x)Cl(x)}(n)] (6(x)) by varying the bromide to chloride ratio and establish a means of controlling MOF composition and the lattice metrics, and so the physical and chemical properties that derive from it.
RESUMO
Carbyne formation: Treatment of a molybdenum ethylene complex with B(C6 F5 )3 induces ditopic activation of an ethylene ligand and acceptor-assisted ethane elimination to generate a novel type of zwitterionic carbyne complex.
RESUMO
Complexes of Group 4 metallocenes in the +3 oxidation state and amidoborane or phosphidoborane function as efficient precatalysts for the dehydrocoupling/dehydrogenation of amine-boranes, such as Me(2) NHâ BH(3). Such Ti(III) -amidoborane complexes are generated in [Cp(2)Ti]-catalyzed amine-borane dehydrocoupling reactions, for which diamagnetic M(II) and M(IV) species have been previously postulated as precatalysts and intermediates.
RESUMO
Herein we demonstrate both the importance of Fe(I) in Negishi cross-coupling reactions with arylzinc reagents and the isolation of catalytically competent Fe(I) intermediates. These complexes, [FeX(dpbz)(2)] [X = 4-tolyl (7), Cl (8a), Br (8b); dpbz = 1,2-bis(diphenylphosphino)benzene], were characterized by crystallography and tested for activity in representative reactions. The complexes are low-spin with no significant spin density on the ligands. While complex 8b shows performance consistent with an on-cycle intermediate, it seems that 7 is an off-cycle species.
Assuntos
Ferro/química , Compostos Organometálicos/síntese química , Catálise , Cristalografia por Raios X , Estrutura Molecular , Compostos Organometálicos/químicaRESUMO
The dehydrocoupling/dehydrogenation behavior of primary arylamine-borane adducts ArNH(2)â BH(3) (3 a-c; Ar = a: Ph, b: p-MeOC(6)H(4), c: p-CF(3)C(6)H(4)) has been studied in detail both in solution at ambient temperature as well as in the solid state at ambient or elevated temperatures. The presence of a metal catalyst was found to be unnecessary for the release of H(2). From reactions of 3 a,b in concentrated solutions in THF at 22 °C over 24â h cyclotriborazanes (ArNH-BH(2))(3) (7 a,b) were isolated as THF adducts, 7 a,bâ THF, or solvent-free 7 a, which could not be obtained via heating of 3 a-c in the melt. The µ-(anilino)diborane [H(2)B(µ-PhNH)(µ-H)BH(2)] (4 a) was observed in the reaction of 3 a with BH(3)â THF and was characterized in situ. The reaction of 3 a with PhNH(2) (2 a) was found to provide a new, convenient method for the preparation of dianilinoborane (PhNH)(2)BH (5 a), which has potential generality. This observation, together with further studies of reactions of 4 a, 5 a, and 7 a,b, provided insight into the mechanism of the catalyst-free ambient temperature dehydrocoupling of 3 a-c in solution. For example, the reaction of 4 a with 5 a yields 6 a and 7 a. It was found that borazines (ArN-BH)(3) (6 a-c) are not simply formed via dehydrogenation of cyclotriborazanes 7 a-c in solution. The transformation of 7 a to 6 a is slowly induced by 5 a and proceeds via regeneration of 3 a. The adducts 3 a-c also underwent rapid dehydrocoupling in the solid state at elevated temperatures and even very slowly at ambient temperature. From aniline-borane derivative 3 c, the linear iminoborane oligomer (p-CF(3)C(6)H(4))N[BH-NH(p-CF(3)C(6)H(4))](2) (11) was obtained. The single-crystal X-ray structures of 3 a-c, 5 a, 7 a, 7 bâ THF, and 11 are discussed.
RESUMO
Feeling the strain: The first example of metal-metal bonding between strained [n]metallocenophanes is reported. A dicarba[2]ruthenocenophanium dimer has been synthesised through the oxidation of a dicarba[2]ruthenocenophane (see figure). The structural and electrochemical characterisation of the dimer is also discussed.
RESUMO
A series of trimethylamine-thioborane adducts, Me(3)N·BH(2)SR (R = tBu [2a], nBu [2b], iPr [2c], Ph [2d], C(6)F(5) [2e]) have been prepared and characterized. Attempts to access secondary and primary amine adducts of thioboranes via amine-exchange reactions involving these species proved unsuccessful, with the thiolate moiety shown to be vulnerable to displacement by free amine. However, treatment of the arylthioboranes, [BH(2)-SPh](3) (9) and C(6)F(5)SBH(2)·SMe(2) (10) with Me(2)NH and iPr(2)NH successfully yielded the adducts Me(2)NH·BH(2)SR (R = Ph [11a], C(6)F(5) [12a]) and iPr(2)NH·BH(2)SR (R = Ph [11b], C(6)F(5) [12b]) in high yield. These adducts were also shown to be accessible via thermally induced hydrothiolation of the aminoboranes Me(2)NâBH(2), derived from the cyclic dimer [Me(2)N-BH(2)](2) (13), and iPr(2)NâBH(2) (14), respectively. Attempts to prepare the aliphatic thiolate substituted adducts R(2)NH·BH(2)SR' (R = Me, iPr; R' = tBu, nBu, iPr) via this method, however, proved unsuccessful, with the temperatures required to facilitate hydrothiolation also inducing thermal dehydrogenation of the amine-thioborane products to form aminothioboranes, R(2)NâBH(SR'). Thermal and catalytic dehydrogenation of the targeted amine-thioboranes, 11a/11b and 12a/12b were also investigated. Adducts 11b and 12b were cleanly dehydrogenated to yield iPr(2)NâBH(SPh) (22) and iPr(2)NâBH(SC(6)F(5)) (23), respectively, at 100 °C (18 h, toluene), with dehydrogenation also possible at 20 °C (42 h, toluene) with a 2 mol % loading of [Rh(µ-Cl)cod](2) in the case of the former species. Similar studies with adduct 11a evidenced a competitive elimination of H(2) and HSPh upon thermolysis, and other complex reactivity under catalytic conditions, whereas the fluorinated analogue 12a was found to be resistant to dehydrogenation.
RESUMO
Stick or twist: By introducing steric hindrance at the nitrogen atom, stable linear amides bearing an electron-withdrawing α-substituent (Z = Ar, PhSO(2), P(O)(OR)(2), CN, or CO(2)R) can be induced to undergo solvolysis and substitution reactions through an elimination-addition mechanism (see picture). Key to this process is a low barrier to rotation around the amide bond and the α-substituentâ Z.
Assuntos
Amidas/química , Nitrogênio/química , Elétrons , TemperaturaRESUMO
The cationic zirconocene-phosphinoaryloxide complexes [Cp(2)ZrOC(6)H(4)P(t-Bu)(2)][B(C(6)F(5))(4)] (3) and [Cp*(2)ZrOC(6)H(4)P(t-Bu)(2)][B(C(6)F(5))(4)] (4) were synthesized by the reaction of Cp(2)ZrMe(2) or Cp*(2)ZrMe(2) with 2-(diphenylphosphino)phenol followed by protonation with [2,6-di-tert-butylpyridinium][B(C(6)F(5))(4)]. Compound 3 exhibits a Zr-P bond, whereas the bulkier Cp* derivative 4 was isolated as a chlorobenzene adduct without this Zr-P interaction. These compounds can be described as transition-metal-containing versions of linked frustrated Lewis pairs (FLPs), and treatment of 4 with H(2) under mild conditions cleaved H(2) in a fashion analogous to that for main-group FLPs. Their reactivity in amine borane dehydrogenation also mimics that of main-group FLPs, and they dehydrogenate a range of amine borane adducts. However, in contrast to main-group FLPs, 3 and 4 achieve this transformation in a catalytic rather than stoichiometric sense, with rates superior to those for previous high-valent catalysts.