Electrical properties of nanostructured tin oxide surfaces produced by thermal treatments.

Sintering SnO2 powder in air or under an oxygen atmosphere at different temperatures, leads to polycrystalline samples with nanostructured surface as revealed by atomic force microscopy (AFM). The thermal treatments are also responsible for the variation of the surface electrical properties, as studied by scanning spreading resistance microscopy (SSRM) and scanning tunnelling microscopy and spectroscopy (STM-STS). The surface presents a p-conductance, contrary to the n-type characteristic of the bulk, and a band gap lower than the bulk band gap (3.6 eV). The electrical behaviour at the grain boundaries and the role of oxygen are discussed. X-ray photoelectron spectroscopy (XPS) results show a higher presence of oxygen at the boundaries, which generates a shift of the Fermi level position (E(F)-E(V)) towards lower energies.

Suppressed decomposition of organometal halide perovskites by impermeable electron-extraction layers in inverted solar cells.

The area of thin-film photovoltaics has been overwhelmed by organometal halide perovskites. Unfortunately, serious stability concerns arise with perovskite solar cells. For example, methyl-ammonium lead iodide is known to decompose in the presence of water and, more severely, even under inert conditions at elevated temperatures. Here, we demonstrate inverted perovskite solar cells, in which the decomposition of the perovskite is significantly mitigated even at elevated temperatures. Specifically, we introduce a bilayered electron-extraction interlayer consisting of aluminium-doped zinc oxide and tin oxide. We evidence tin oxide grown by atomic layer deposition does form an outstandingly dense gas permeation barrier that effectively hinders the ingress of moisture towards the perovskite and-more importantly-it prevents the egress of decomposition products of the perovskite. Thereby, the overall decomposition of the perovskite is significantly suppressed, leading to an outstanding device stability.

Plasmonically sensitized metal-oxide electron extraction layers for organic solar cells.

ZnO and TiOx are commonly used as electron extraction layers (EELs) in organic solar cells (OSCs). A general phenomenon of OSCs incorporating these metal-oxides is the requirement to illuminate the devices with UV light in order to improve device characteristics. This may cause severe problems if UV to VIS down-conversion is applied or if the UV spectral range (λ < 400 nm) is blocked to achieve an improved device lifetime. In this work, silver nanoparticles (AgNP) are used to plasmonically sensitize metal-oxide based EELs in the vicinity (1-20 nm) of the metal-oxide/organic interface. We evidence that plasmonically sensitized metal-oxide layers facilitate electron extraction and afford well-behaved highly efficient OSCs, even without the typical requirement of UV exposure. It is shown that in the plasmonically sensitized metal-oxides the illumination with visible light lowers the WF due to desorption of previously ionosorbed oxygen, in analogy to the process found in neat metal oxides upon UV exposure, only. As underlying mechanism the transfer of hot holes from the metal to the oxide upon illumination with hν < Eg is verified. The general applicability of this concept to most common metal-oxides (e.g. TiOx and ZnO) in combination with different photoactive organic materials is demonstrated.

Spectrally resolved cathodoluminescence analyses in the optical near-field.

By implementing a scanning near-field optical microscope into the specimen chamber of a scanning electron microscope, cathodoluminescence can be locally detected in the optical near-field. The achievable spatial resolution in this set-up is only limited by the size of the aperture in a coated fibre probe and its separation from the sample, rather than by the energy dissipation volume of the primary electrons and diffusion processes of excess carriers inside the specimen. We demonstrate how electronically active defects in polycrystalline diamond can be distinguished and localized with sub-wavelength lateral resolution by spectral filtering of the cathodoluminescence signal.