Design, Synthesis, and Optoelectronic Properties of the High-Purity Phase in Layered AETMN2 (AE = Sr, Ba; TM = Ti, Zr, Hf) Semiconductors.

We report the synthesis and optoelectronic properties of high phase-purity (>94 mol %) bulk polycrystals of KCoO2-type layered nitrides AETMN2 (AE = Sr, Ba; and TM = Ti, Zr, Hf), which are expected to exhibit unique electron transport properties originating from their natural two-dimensional (2D) electronic structure, but high-purity intrinsic samples have yet been reported. The bulks were synthesized using a solid-state reaction between AENH and TMN precursors with NaN3 to achieve high N chemical potential during the reaction. The AETMN2 bulks are n-type semiconductors with optical band gaps of 1.63 eV for SrTiN2, 1.97 eV for BaZrN2, and 2.17 eV for BaHfN2. SrTiN2 and BaZrN2 bulks show degenerated electron conduction due to the natural high-density electron doping and paramagnetic behavior in all of the temperature ranges examined, while such unintentional carrier generation is largely suppressed in BaHfN2, which exhibits nondegenerated electron conduction. The BaHfN2 sample also exhibits weak ferromagnetic behavior at temperatures lower than 35 K. Density functional theory calculations suggest that the high-density electron carriers in SrTiN2 come from oxygen impurity substitution at the N site (ON) acting as a shallow donor even if the high-N chemical potential synthesis conditions are employed. On the other hand, the formation energy of ON becomes larger in BaHfN2 because of the stronger TM-N chemical bonds. Present results demonstrate that the easiness of impurity incorporation is designed by density functional calculations to produce a more intrinsic semiconductor in wider chemical conditions, opening a way to cultivating novel functional materials that are sensitive to atmospheric impurities and defects.

Large phonon drag thermopower boosted by massive electrons and phonon leaking in LaAlO3/LaNiO3/LaAlO3 heterostructure.

An unusually large thermopower (S) enhancement is induced by heterostructuring thin films of the strongly correlated electron oxide LaNiO3. The phonon-drag effect, which is not observed in bulk LaNiO3, enhances S for thin films compressively strained by LaAlO3 substrates. By a reduction in the layer thickness down to three unit cells and subsequent LaAlO3 surface termination, a 10 times S enhancement over the bulk value is observed due to large phonon drag S (Sg), and the Sg contribution to the total S occurs over a much wider temperature range up to 220 K. The Sg enhancement originates from the coupling of lattice vibration to the d electrons with large effective mass in the compressively strained ultrathin LaNiO3, and the electron-phonon interaction is largely enhanced by the phonon leakage from the LaAlO3 substrate and the capping layer. The transition-metal oxide heterostructures emerge as a new playground to manipulate electronic and phononic properties in the quest for high-performance thermoelectrics.

Material Design of Green-Light-Emitting Semiconductors: Perovskite-Type Sulfide SrHfS3.

A current issue facing light-emitting devices is a missing suitable material for green emission. To overcome this, we explore semiconductors possessing (i) a deep conduction band minimum (CBM) and a shallow valence band maximum (VBM), (ii) good controllability of electronic conductivity and carrier polarity, and (iii) a directly allowed band gap corresponding to green emission. We focus on early transition metal ( eTM)-based perovskites. The eTM cation's high and stable valence state makes its carrier controllability easy, and the eTM's nonbonding d orbital and the anion's p orbital, which constitute the deep CBM and shallow VBM, are favorable to n- and p-type doping, respectively. To obtain a direct band gap, we applied a scheme that folds the bands constituting the VBM at the zone boundary to the zone center where the CBM appears. Orthorhombic SrHfS3 was chosen as the candidate. The electrical conductivity was tuned from 6 × 10-7 to 7 × 10-1 S·cm-1 with lanthanum (La) doping and to 2 × 10-4 S·cm-1 with phosphorus (P) doping. Simultaneously, the major carrier polarity was controlled to n type by La doping and to p type by P doping. Both the undoped and doped SrHfS3 exhibited intense green photoluminescence (PL) at 2.37 eV. From the PL blue shift and short lifetime, we attributed the emission to a band-to-band transition and/or exciton. These results demonstrate that SrHfS3 is a promising green-light-emitting semiconductor.

Tunable Light Emission through the Range 1.8-3.2 eV and p-Type Conductivity at Room Temperature for Nitride Semiconductors, Ca(Mg1-xZnx)2N2 (x = 0-1).

The ternary nitride CaZn2N2, composed only of earth-abundant elements, is a novel semiconductor with a band gap of ∼1.8 eV. First-principles calculations predict that continuous Mg substitution at the Zn site will change the optical band gap in a wide range from ∼3.3-1.9 eV for Ca(Mg1-xZnx)2N2 (x = 0-1). In this study, we demonstrate that a solid-state reaction at ambient pressure and a high-pressure synthesis at 5 GPa produce x = 0 and 0.12 and 0.12 < x ≤ 1 polycrystalline samples, respectively. It is experimentally confirmed that the optical band gap can be continuously tuned from ∼3.2 to ∼1.8 eV, a range very close to that predicted by theory. Band to band photoluminescence is observed at room temperature in the ultraviolet-red region depending on x. A 2% Na doping at the Ca site of Ca(Mg1-xZnx)2N2 converts its highly resistive state to a p-type conducting state. Particularly, the x = 0.50 sample exhibits intense green emission with a peak at 2.45 eV (506 nm) without any other emission from deep-level defects. These features meet the demands of III-V group nitride and arsenide/phosphide light-emitting semiconductors.

Electric field-induced superconducting transition of insulating FeSe thin film at 35 K.

It is thought that strong electron correlation in an insulating parent phase would enhance a critical temperature (Tc) of superconductivity in a doped phase via enhancement of the binding energy of a Cooper pair as known in high-Tc cuprates. To induce a superconductor transition in an insulating phase, injection of a high density of carriers is needed (e.g., by impurity doping). An electric double-layer transistor (EDLT) with an ionic liquid gate insulator enables such a field-induced transition to be investigated and is expected to result in a high Tc because it is free from deterioration in structure and carrier transport that are in general caused by conventional carrier doping (e.g., chemical substitution). Here, for insulating epitaxial thin films (∼10 nm thick) of FeSe, we report a high Tc of 35 K, which is 4× higher than that of bulk FeSe, using an EDLT under application of a gate bias of +5.5 V. Hall effect measurements under the gate bias suggest that highly accumulated electron carrier in the channel, whose area density is estimated to be 1.4 × 10(15) cm(-2) (the average volume density of 1.7 × 10(21) cm(-3)), is the origin of the high-Tc superconductivity. This result demonstrates that EDLTs are useful tools to explore the ultimate Tc for insulating parent materials.

Multiple states and roles of hydrogen in p-type SnS semiconductors.

Hydrogen (H) plays critical roles in the electrical properties of semiconductor materials and devices. In this work, we report multiple states and roles of H in SnS by H plasma treatment and density functional theory (DFT) calculations. The as-deposited SnS films include impurity H at 2.3 × 1019 cm-3, four orders of magnitude larger than the hole density. The DFT calculations reveal that H exists in multiple states at the equilibrium mainly at the interstitial and the Sn-substitutional sites, which have formation enthalpies lower than those for the intrinsic defects. These H states work as donors and acceptors, respectively, and strongly pin the Fermi level in the p-type region. The native p-type conduction in the actual SnS semiconductors is caused mainly by the H-on-Sn (HSn) acceptors, rather than the previously reported Sn vacancies (VSn) for pure SnS. It is also confirmed that even stronger H doping with larger H chemical potentials cannot convert SnS to an n-type conductor because it reduces SnS to Sn metal.

Exploration of Stable Strontium Phosphide-Based Electrides: Theoretical Structure Prediction and Experimental Validation.

Inspired by the successful synthesis of alkaline-earth-metals-based electrides [Ca24Al28O64]4+(e-)4 (C12A7:e-) and [Ca2N]+:e- and high-throughput database screening results, we explore the potential for new electrides to emerge in the Sr-P system through a research approach combining ab initio evolutionary structure searches and experimental validation. Through employing an extensive evolutionary structure search and first-principles calculations, we first predict the new structures of a series of strontium phosphides: Sr5P3, Sr8P5, Sr3P2 and Sr4P3. Of these structures, we identify Sr5P3 and Sr8P5 as being potential electrides with quasi-one-dimensional (1D) and zero-dimensional (0D) character, respectively. Following these theoretical results, we present the successful synthesis of the new compound Sr5P3 and the experimental confirmation of its structure. Although density functional calculations with the generalized gradient approximation predict Sr5P3 to be a metal, electrical conductivity measurement reveal semiconducting properties characterized by a distinct band gap, which indicates that the newly synthesized Sr5P3 is an ideal one-dimensional electride with the half-filled band by unpaired electrons. In addition to presenting the novel electride Sr5P3, we discuss the implications of its semiconducting nature for 1D electrides in general and propose a mechanism for the formation of electrides with an orbital level diagram based on first-principles calculations.

An Exceptionally Narrow Band-Gap (∼4 eV) Silicate Predicted in the Cubic Perovskite Structure: BaSiO3.

The electronic structures of 35 A2+B4+O3 ternary cubic perovskite oxides, including their hypothetical chemical compositions, were calculated by a hybrid functional method with the expectation that peculiar electronic structures and unique carrier transport properties suitable for semiconductor applications would be hidden in high-symmetry cubic perovskite oxides. We found unique electronic structures of Si-based oxides (A = Mg, Ca, Sr, and Ba, and B = Si). In particular, the unreported cubic BaSiO3 has a very narrow band gap (4.1 eV) compared with conventional nontransition-metal silicates (e.g., ∼9 eV for SiO2 and the calculated value of 7.3 eV for orthorhombic BaSiO3) and a small electron effective mass (0.3m0, where m0 is the free electron rest mass). The narrow band gap is ascribed to the nonbonding state of Si 3s and the weakened Madelung potential. The existence of the predicted cubic perovskite structure of BaSiO3 was experimentally verified by applying a high pressure of 141 GPa. The present finding indicates that it could be possible to develop a new transparent oxide semiconductor of earth abundant silicates if the symmetry of its crystal structure is appropriately chosen. Cubic BaSiO3 is a candidate for high-performance oxide semiconductors if this phase can be stabilized at room temperature and ambient pressure.

Electric double-layer transistor using layered iron selenide Mott insulator TlFe1.6Se2.

A(1-x)Fe(2-y)Se2 (A = K, Cs, Rb, Tl) are recently discovered iron-based superconductors with critical temperatures (Tc) ranging up to 32 K. Their parent phases have unique properties compared with other iron-based superconductors; e.g., their crystal structures include ordered Fe vacancies, their normal states are antiferromagnetic (AFM) insulating phases, and they have extremely high Néel transition temperatures. However, control of carrier doping into the parent AFM insulators has been difficult due to their intrinsic phase separation. Here, we fabricated an Fe-vacancy-ordered TlFe1.6Se2 insulating epitaxial film with an atomically flat surface and examined its electrostatic carrier doping using an electric double-layer transistor (EDLT) structure with an ionic liquid gate. The positive gate voltage gave a conductance modulation of three orders of magnitude at 25 K, and further induced and manipulated a phase transition; i.e., delocalized carrier generation by electrostatic doping is the origin of the phase transition. This is the first demonstration, to the authors' knowledge, of an EDLT using a Mott insulator iron selenide channel and opens a way to explore high Tc superconductivity in iron-based layered materials, where carrier doping by conventional chemical means is difficult.

Exploration of new superconductors and functional materials, and fabrication of superconducting tapes and wires of iron pnictides.

This review shows the highlights of a 4-year-long research project supported by the Japanese Government to explore new superconducting materials and relevant functional materials. The project found several tens of new superconductors by examining ∼1000 materials, each of which was chosen by Japanese experts with a background in solid state chemistry. This review summarizes the major achievements of the project in newly found superconducting materials, and the fabrication wires and tapes of iron-based superconductors; it incorporates a list of ∼700 unsuccessful materials examined for superconductivity in the project. In addition, described are new functional materials and functionalities discovered during the project.

Narrow bandgap in ß-BaZn2As2 and its chemical origins.

ß-BaZn2As2 is known to be a p-type semiconductor with the layered crystal structure similar to that of LaZnAsO, leading to the expectation that ß-BaZn2As2 and LaZnAsO have similar bandgaps; however, the bandgap of ß-BaZn2As2 (previously reported value ~0.2 eV) is 1 order of magnitude smaller than that of LaZnAsO (1.5 eV). In this paper, the reliable bandgap value of ß-BaZn2As2 is determined to be 0.23 eV from the intrinsic region of the temperature dependence of electrical conductivity. The origins of this narrow bandgap are discussed based on the chemical bonding nature probed by 6 keV hard X-ray photoemission spectroscopy, hybrid density functional calculations, and the ligand theory. One origin is the direct As-As hybridization between adjacent [ZnAs] layers, which leads to a secondary splitting of As 4p levels and raises the valence band maximum. The other is that the nonbonding Ba 5d(x(2)-y(2)) orbitals form an unexpectedly deep conduction band minimum (CBM) in ß-BaZn2As2 although the CBM of LaZnAsO is formed mainly of Zn 4s. These two origins provide a quantitative explanation for the bandgap difference between ß-BaZn2As2 and LaZnAsO.

Inverse-Perovskite Ba3 BO (B = Si and Ge) as a High Performance Environmentally Benign Thermoelectric Material with Low Lattice Thermal Conductivity.

High energy-conversion efficiency (ZT) of thermoelectric materials has been achieved in heavy metal chalcogenides, but the use of toxic Pb or Te is an obstacle for wide applications of thermoelectricity. Here, high ZT is demonstrated in toxic-element free Ba3 BO (B = Si and Ge) with inverse-perovskite structure. The negatively charged B ion contributes to hole transport with long carrier life time, and their highly dispersive bands with multiple valley degeneracy realize both high p-type electronic conductivity and high Seebeck coefficient, resulting in high power factor (PF). In addition, extremely low lattice thermal conductivities (κlat ) 1.0-0.4 W m-1  K-1 at T = 300-600 K are observed in Ba3 BO. Highly distorted O-Ba6 octahedral framework with weak ionic bonds between Ba with large mass and O provides low phonon velocities and strong phonon scattering in Ba3 BO. As a consequence of high PF and low κlat , Ba3 SiO (Ba3 GeO) exhibits rather high ZT = 0.16-0.84 (0.35-0.65) at T = 300-623 K (300-523 K). Finally, based on first-principles carrier and phonon transport calculations, maximum ZT is predicted to be 2.14 for Ba3 SiO and 1.21 for Ba3 GeO at T = 600 K by optimizing hole concentration. Present results propose that inverse-perovskites would be a new platform of environmentally-benign high-ZT thermoelectric materials.

Indium-based ultraviolet-transparent electroconductive oxyfluoride InOF: ambient-pressure synthesis and unique electronic properties in comparison with In2O3.

A method for the synthesis of single-phase powdered InOF under ambient pressure has been developed. The method involves pyrolysis of a hydrate of InF3 in an O2 atmosphere of controlled humidity. Various intermediate phases were formed during the pyrolysis, and their structures and interconversions were analyzed. Combined results of optical absorption measurements and density functional calculations indicate that InOF is a direct band gap material with a band gap energy of ∼3.7 eV. Unlike In2O3, the electrical conductivity of polycrystalline InOF pellets can be controlled over ∼8 orders of magnitude from ∼10(-8) S cm(-1) to ∼2 S cm(-1) by thermal annealing, and the sample with the highest conductivity was a nearly degenerate n-type semiconductor with a relatively small carrier concentration of ∼10(18) cm(-3). The work function of InOF measured by ultraviolet photoelectron spectroscopy is ∼3.5 eV and is smaller by ∼1.5 eV than that of In2O3. This difference comes from a decrease in the electron affinity.

Characteristic Resistive Switching of Rare-Earth Oxyhydrides by Hydride Ion Insertion and Extraction.

Resistive switching induced by ion migration is promising for applications such as random-access memory (ReRAM) and neuromorphic transistors. Hydride ions (H-) are an interesting candidate as the migration ion for resistive switching devices because they have fast diffusion in several compounds at room temperature and doping/dedoping can be used effectively to achieve significant changes in the electronic conductivity. Here, we report reversible resistive switching characteristics in rare-earth oxyhydrides (REHxO(3-x)/2) induced by field insertion/extraction of H-. The current-voltage measurements revealed that the resistive switching response, hysteresis, and switching voltage vary greatly with the H-/O2- ratio in the films. We fabricated a ReRAM device using Ti/YH1.3O0.85/MoOx structure and confirmed the bipolar-type operation with the resistance switching ratio of 1 order of magnitude over 1000 cycles. The composition gradient of H-/O2- in YHxO(3-x)/2 films, in addition to the hydrogen-absorbing ability of the top electrode, is essential for effective device operation. Our findings show that hydride-conducting solid-state electrolytes are suitable for resistive switching device development.

Degenerated Hole Doping and Ultra-Low Lattice Thermal Conductivity in Polycrystalline SnSe by Nonequilibrium Isovalent Te Substitution.

Tin mono-selenide (SnSe) exhibits the world record of thermoelectric conversion efficiency ZT in the single crystal form, but the performance of polycrystalline SnSe is restricted by low electronic conductivity (σ) and high thermal conductivity (κ), compared to those of the single crystal. Here an effective strategy to achieve high σ and low κ simultaneously is reported on p-type polycrystalline SnSe with isovalent Te ion substitution. The nonequilibrium Sn(Se1- x Tex ) solid solution bulks with x up to 0.4 are synthesized by the two-step process composed of high-temperature solid-state reaction and rapid thermal quenching. The Te ion substitution in SnSe realizes high σ due to the 103 -times increase in hole carrier concentration and effectively reduced lattice κ less than one-third at room temperature. The large-size Te ion in Sn(Se1- x Tex ) forms weak SnTe bonds, leading to the high-density formation of hole-donating Sn vacancies and the reduced phonon frequency and enhanced phonon scattering. This result-doping of large-size ions beyond the equilibrium limit-proposes a new idea for carrier doping and controlling thermal properties to enhance the ZT of polycrystalline SnSe.

High-Mobility Metastable Rock-Salt Type (Sn,Ca)Se Thin Film Stabilized by Direct Epitaxial Growth on a YSZ (111) Single-Crystal Substrate.

Metastable cubic (Sn1-xPbx)Se with x ≥ 0.5 is expected to be a high mobility semiconductor due to its Dirac-like electronic state, but it has an excessively high carrier concentration of ∼1019 cm-3 and is not suitable for semiconductor device applications such as thin film transistors and solar cells. Further, thin films of (Sn1-xPbx)Se require a complicated synthesis process because of the high vapor pressure of Pb. We herein report the direct growth of metastable cubic (Sn1-xCax)Se films alloyed with CaSe, which has a wider bandgap and lower vapor pressure than PbSe. The cubic (Sn1-xCax)Se epitaxial films with x = 0.4-0.8 are stabilized on YSZ (111) single crystalline substrates by pulsed laser deposition. (Sn1-xCax)Se has a direct-transition-type bandgap, and the bandgap energy can be varied from 1.4 eV (x = 0.4) to 2.0 eV (x = 0.8) by changing x. These films with x = 0.4-0.6 show p-type conduction with low hole carrier concentrations of ∼1017 cm-3. Hall mobility analysis suggests that the hole transport would be dominated by 180° rotational domain structures, which is specific to (111) oriented epitaxial films. However, it, in turn, clarifies that the in-grain carrier mobility in the (Sn0.6Ca0.4)Se film is as high as 322 cm2/(Vs), which is much higher than those in thermodynamically stable layered SnSe and other Sn-based layered semiconductor films at room temperature. Therefore, the present results prove the potential of high mobility (Sn1-xCax)Se films for semiconductor device applications via a simple thin-film deposition process.

Breaking of Thermopower-Conductivity Trade-Off in LaTiO3 Film around Mott Insulator to Metal Transition.

Introducing artificial strain in epitaxial thin films is an effective strategy to alter electronic structures of transition metal oxides (TMOs) and to induce novel phenomena and functionalities not realized in bulk crystals. This study reports a breaking of the conventional trade-off relation in thermopower (S)-conductivity (σ) and demonstrates a 2 orders of magnitude enhancement of power factor (PF) in compressively strained LaTiO3 (LTO) films. By varying substrates and reducing film thickness down to 4 nm, the out-of-plane to the in-plane lattice parameter ratio is controlled from 0.992 (tensile strain) to 1.034 (compressive strain). This tuning induces the electronic structure change from a Mott insulator to a metal and leads to a 103 -fold increase in σ up to 2920 S cm-1 . Concomitantly, the sign of S inverts from positive to negative, and both σ and S increase and break the trade-off relation between them in the n-type region. As a result, the PF (=S2 σ) is significantly enhanced to 300 µW m- 1 K-2 , which is 102 times larger than that of bulk LTO. Present results propose epitaxial strain as a means to finely tune strongly correlated TMOs close to their Mott transition, and thus to harness the hidden large thermoelectric PF.

Reversible 3D-2D structural phase transition and giant electronic modulation in nonequilibrium alloy semiconductor, lead-tin-selenide.

Material properties depend largely on the dimensionality of the crystal structures and the associated electronic structures. If the crystal-structure dimensionality can be switched reversibly in the same material, then a drastic property change may be controllable. Here, we propose a design route for a direct three-dimensional (3D) to 2D structural phase transition, demonstrating an example in (Pb1-x Sn x )Se alloy system, where Pb2+ and Sn2+ have similar ns2 pseudo-closed shell configurations, but the former stabilizes the 3D rock-salt-type structure while the latter a 2D layered structure. However, this system has no direct phase boundary between these crystal structures under thermal equilibrium. We succeeded in inducing the direct 3D-2D structural phase transition in (Pb1-x Sn x )Se alloy epitaxial films by using a nonequilibrium growth technique. Reversible giant electronic property change was attained at x ~ 0.5 originating in the abrupt band structure switch from gapless Dirac-like state to semiconducting state.

Origins of hole doping and relevant optoelectronic properties of wide gap p-type semiconductor, LaCuOSe.

LaCuOSe is a wide band gap (∼2.8 eV) semiconductor with unique optoelectronic properties, including room-temperature stable excitons, high hole mobility ∼8 cm(2)/(Vs), and the capability of high-density hole doping (up to 1.7 × 10(21) cm(-3) using Mg). Moreover, its carrier transport and doping behaviors exhibit nonconventional results, e.g., the hole concentration increases with decreasing temperature and the high hole doping does not correlate with other properties such as optical absorption. Herein, secondary ion mass spectroscopy and photoemission spectroscopy reveal that aliovalent ion substitution of Mg at the La site is not the main source of hole doping and the Fermi level does not shift even in heavily doped LaCuOSe:Mg. As the hole concentration increases, the subgap optical absorption becomes more intense, but the increase in intensity does not correlate quantitatively. Transmission electron microscopy indicates that planar defects composed of Cu and Se deficiencies are easily created in LaCuOSe. These observations can be explained via the existence of a degenerate low-mobility layer and formation of complex Cu and Se vacancy defects with the assistance of generalized gradient approximation band calculations.

Strain Engineering at Heterointerfaces: Application to an Iron Pnictide Superconductor, Cobalt-Doped BaFe2As2.

We propose a unique strategy to apply stronger strain at heterointerfaces than conventional epitaxial strain methods to extract hidden attractive physical/chemical properties in materials. This strategy involves precisely accounting for the epitaxial strain induced by lattice mismatch as well as the differences in the thermal expansion coefficients and compressibilities of epitaxial films and substrates. We selected optimally cobalt-doped BaFe2As2(Ba122:Co), an iron-based superconductor with a bulk critical temperature (Tc) of 22 K, as a model material and four types of single-crystal substrates. Ba122:Co was selected because its Tc is robust to hydrostatic pressure but sensitive to epitaxial strain (i.e., one of the anisotropic strains), and the selected substrates entirely cover the positive/negative lattice mismatches, thermal expansion coefficients, and compressibilities with respect to Ba122:Co. With strong anisotropic strain successfully induced by film growth, external hydrostatic pressurizing, and cooling processes, we observed unique carrier transport properties in Ba122:Co epitaxial films on CaF2 and BaF2 substrates including (i) upturn behavior in the temperature dependence of the longitudinal resistivity, (ii) negative magnetoresistance, (iii) large enhancement of anomalous Hall effects in the epitaxial films on CaF2, and (iv) enhancement of Tc to 27 K in the epitaxial films on BaF2. These results demonstrate the effectiveness of our strategy, and this approach can be further extended to other inorganic materials in thin-film form.