Tungsten Nitride (W5N6): An Ultraresilient 2D Semimetal.

Two-dimensional transition metal nitrides offer intriguing possibilities for achieving novel electronic and mechanical functionality owing to their distinctive and tunable bonding characteristics compared to other 2D materials. We demonstrate here the enabling effects of strong bonding on the morphology and functionality of 2D tungsten nitrides. The employed bottom-up synthesis experienced a unique substrate stabilization effect beyond van-der-Waals epitaxy that favored W5N6 over lower metal nitrides. Comprehensive structural and electronic characterization reveals that monolayer W5N6 can be synthesized at large scale and shows semimetallic behavior with an intriguing indirect band structure. Moreover, the material exhibits exceptional resilience against mechanical damage and chemical reactions. Leveraging these electronic properties and robustness, we demonstrate the application of W5N6 as atomic-scale dry etch stops that allow the integration of high-performance 2D materials contacts. These findings highlight the potential of 2D transition metal nitrides for realizing advanced electronic devices and functional interfaces.

Self-Expansion Based Multi-Patterning for 2D Materials Fabrication beyond the Lithographical Limit.

Two-dimensional (2D) materials are promising successors for silicon transistor channels in ultimately scaled devices, necessitating significant research efforts to study their behavior at nanoscopic length scales. Unfortunately, current research has limited itself to direct patterning approaches, which limit the achievable resolution to the diffraction limit and introduce unwanted defects into the 2D material. The potential of multi-patterning to fabricate 2D materials features with unprecedented precision and low complexity at large scale is demonstrated here. By combining lithographic patterning of a mandrel and bottom-up self-expansion, this approach enables pattern resolution one order of magnitude below the lithographical resolution. In-depth characterization of the self-expansion double patterning (SEDP) process reveals the ability to manipulate the critical dimension with nanometer precision through a self-limiting and temperature-controlled oxidation process. These results indicate that the SEDP process can regain the quality and morphology of the 2D material, as shown by high-resolution microscopy and optical spectroscopy. This approach is shown to open up new avenues for research into high-performance, ultra-scaled 2D materials devices for future electronics.

2D Material-Enabled Optical Rectennas with Ultrastrong Light-Electron Coupling.

Optical rectennas extend the electromagnetic wave rectification process into the visible regime and provide a route toward high-performance photodetection and energy harvesting. Here, the promise of 2D materials toward on-chip optical rectennas is demonstrated. A self-aligned patterning process yields lateral MIM structures where a nanometer-sized air gap separates a 2D material contact from a metal electrode. This device can be scalably produced in large arrays using established microfabrication techniques. Different from previous approaches, the performance of the 2D rectenna can be adjusted through electrostatic gating. Optimization of the band alignment leads to strong rectification at wavelengths around 500 nm and clear polarization control. Comparison of wavelength-dependent rectenna performance with a photon-assisted tunneling model reveals a tenfold increase in photon-electron coupling over nanotube-based rectennas. The results highlight the potential of 2D material-based rectennas for future quantum computing applications.

Two-Dimensional Mechano-thermoelectric Heterojunctions for Self-Powered Strain Sensors.

We here demonstrate the multifunctional properties of atomically thin heterojunctions that are enabled by their strong interfacial interactions and their application toward self-powered sensors with unprecedented performance. Bonding between tin diselenide and graphene produces thermoelectric and mechanoelectric properties beyond the ability of either component. A record-breaking ZT of 2.43 originated from the synergistic combination of graphene's high carrier conductivity and SnSe2-mediated thermal conductivity lowering. Moreover, spatially varying interaction at the SnSe2/graphene interface produces stress localization that results in a novel 2D-crack-assisted strain sensing mechanism whose sensitivity (GF = 450) is superior to all other 2D materials. Finally, a graphene-assisted growth process permits the formation of high-quality heterojunctions directly on polymeric substrates for flexible and transparent sensors that achieve self-powered strain sensing from a small temperature gradient. Our work enhances the fundamental understanding of multifunctionality at the atomic scale and provides a route toward structural health monitoring through ubiquitous and smart devices.

Modelling electrical conduction in nanostructure assemblies through complex networks.

Carrier transport processes in assemblies of nanostructures rely on morphology-dependent and hierarchical conduction mechanisms, whose complexity cannot be captured by current modelling approaches. Here we apply the concept of complex networks to modelling carrier conduction in such systems. The approach permits assignment of arbitrary connectivity and connection strength between assembly constituents and is thus ideal for nanostructured films, composites and other geometries. Modelling of simplified rod-like nanostructures is consistent with analytical solutions, whereas results for more realistic nanostructure assemblies agree with experimental data and reveal conduction behaviour not captured by previous models. Fitting of ensemble measurements also allows the conduction properties of individual constituents to be extracted, which are subsequently used to guide the realization of transparent electrodes with improved performance. A global optimization process was employed to identify geometries and properties with high potential for transparent conductors. Our intuitive discretization approach, combined with a simple solver tool, allows researchers with little computational experience to carry out realistic simulations.

2D Material-Enabled Nanomechanical Bolometer.

We here describe a novel type of long-wavelength radiation detector that measures illumination intensity at room temperature through mechanical transduction. Compared to semiconductor-based bolometers, our nanomechanical detector exhibits low measurement noise and is inherently transparent and flexible. The presented solid-state device is based on a 2D-material film that acts as radiation absorber and detector of mechanical strain at the substrate-absorber interface. Optimization of the 2D material properties and realization of a novel edge-on device geometry combines unprecedented detectivity of 3.34 × 108 cm Hz1/2 W-1 with micrometer-scale spatial resolution. The observed combination of superior performance with the facile and scalable fabrication using only liquid processes shows the potential of the presented detector for future ubiquitous and wearable electronics.

QD/2D Hybrid Nanoscrolls: A New Class of Materials for High-Performance Polarized Photodetection and Ultralow Threshold Laser Action.

Nanoscrolls are a class of nanostructures where atomic layers of 2D materials are stacked consecutively in a coaxial manner to form a 1D spiral topography. Self-assembly of chemical vapor deposition grown 2D WS2 monolayer into quasi-1D van der Waals scroll structure instigates a plethora of unique physiochemical properties significantly different from its 2D counterparts. The physical properties of such nanoscrolls can be greatly manipulated upon hybridizing them with high-quantum-yield colloidal quantum dots, forming 0D/2D structures. The efficient dissociation of excitons at the heterojunctions of QD/2D hybridized nanoscrolls exhibits a 3000-fold increased photosensitivity compared to the pristine 2D-material-based nanoscroll. The synergistic effects of confined geometry and efficient QD scatterers produce a nanocavity with multiple feedback loops, resulting in coherent lasing action with an unprecedentedly low lasing threshold. Predominant localization of the excitons along the circumference of this helical scroll results in a 12-fold brighter emission for the parallel-polarized transition compared to the perpendicular one, as confirmed by finite-difference time-domain simulation. The versatility of hybridized nanoscrolls and their unique properties opens up a powerful route for not-yet-realized devices toward practical applications.

Reducing the graphene grain density in three steps.

The production of large-scale, single crystalline graphene is a requirement for enhancing its electronic, mechanical, and chemical properties. Chemical vapor deposition (CVD) has shown the potential to grow high quality graphene but the simultaneous nucleation of many grains limits their achievable domain size. We report here that ultralow nucleation densities can be achieved through multi-step optimization of the catalyst morphology. First, annealing in a hydrogen-free environment is required to retain a surface copper oxide which decreases the nucleation density. Second, CuO was found to be the relevant copper species for this process and air oxidation of the copper foil at 200 °C maximizes its concentration. Both pre-treatment steps were found to affect the morphology of the catalyst and a direct correlation between nucleation density and surface roughness was found which indicates that the primary role of the oxidation step is the decrease in catalyst roughness. To further enhance this determining parameter, confined CVD was carried out after sample oxidation and hydrogen-free annealing. Each of these three steps reduces the grain density by approximately one order of magnitude resulting in ultralow nucleation densities of 1.23 grains/mm(2) and high quality, single-crystalline graphene grains of several millimeter sizes were grown using this method.

Scalable production of graphene with tunable and stable doping by electrochemical intercalation and exfoliation.

Graphene's unique semimetallic band structure yields carriers with widely tunable energy levels that enable novel electronic devices and energy generators. To enhance the potential of this feature, a scalable synthesis method for graphene with adjustable Fermi levels is required. We here show that the electrochemical intercalation of FeCl3 and subsequent electrochemical exfoliation produces graphene whose energy levels can be finely tuned by the intercalation parameters. X-ray photoelectron spectroscopy reveals that a gradual transition in the bonding character of the intercalant is the source of this behavior. The intercalated graphene exhibits a significantly increased work function that can be varied between 4.8 eV and 5.2 eV by the intercalation potential. Transparent conducting electrodes produced by these graphene flakes exhibit a threefold improvement in performance and the doping effect was found to be stable for more than a year. These findings open up a new route for the scalable production of graphene with adjustable properties for future applications.

Controlling the properties of graphene produced by electrochemical exfoliation.

The synthesis of graphene with controllable electronic and mechanical characteristics is of significant importance for its application in various fields ranging from drug delivery to energy storage. Electrochemical exfoliation of graphite has yielded graphene with widely varying behavior and could be a suitable approach. Currently, however the limited understanding of the exfoliation process obstructs targeted modification of graphene properties. We here investigate the process of electrochemical exfoliation and the impact of its parameters on the produced graphene. Using in situ optical and electrical measurements we determine that solvent intercalation is the required first step and the degree of intercalation controls the thickness of the exfoliated graphene. Electrochemical decomposition of water into gas bubbles causes the expansion of graphite and controls the functionalization and lateral size of the exfoliated graphene. Both process steps proceed at different time scales and can be individually addressed through application of pulsed voltages. The potential of the presented approach was demonstrated by improving the performance of graphene-based transparent conductors by 30times.

Assessment of exhaust emissions from carbon nanotube production and particle collection by sampling filters.

UNLABELLED: This study performed a workplace evaluation of emission control using available air sampling filters and characterized the emitted particles captured in filters. Characterized particles were contained in the exhaust gas released from carbon nanotube (CNT) synthesis using chemical vapor deposition (CVD). Emitted nanoparticles were collected on grids to be analyzed using transmission electron microscopy (TEM). CNT clusters in the exhaust gas were collected on filters for investigation. Three types of filters, including Nalgene surfactant-free cellulose acetate (SFCA), Pall A/E glass fiber, and Whatman QMA quartz filters, were evaluated as emission control measures, and particles deposited in the filters were characterized using scanning transmission electron microscopy (STEM) to further understand the nature of particles emitted from this CNT production. STEM analysis for collected particles on filters found that particles deposited on filter fibers had a similar morphology on all three filters, that is, hydrophobic agglomerates forming circular beaded clusters on hydrophilic filter fibers on the collecting side of the filter. CNT agglomerates were found trapped underneath the filter surface. The particle agglomerates consisted mostly of elemental carbon regardless of the shapes. Most particles were trapped in filters and no particles were found in the exhaust downstream from A/E and quartz filters, while a few nanometer-sized and submicrometer-sized individual particles and filament agglomerates were found downstream from the SFCA filter. The number concentration of particles with diameters from 5 nm to 20 µm was measured while collecting particles on grids at the exhaust piping. Total number concentration was reduced from an average of 88,500 to 700 particle/cm(3) for the lowest found for all filters used. Overall, the quartz filter showed the most consistent and highest particle reduction control, and exhaust particles containing nanotubes were successfully collected and trapped inside this filter. IMPLICATIONS: As concern for the toxicity of engineered nanoparticles grows, there is a need to characterize emission from carbon nanotube synthesis processes and to investigate methods to prevent their environmental release. At this time, the particles emitted from synthesis were not well characterized when collected on filters, and limited information was available about filter performance to such emission. This field study used readily available sampling filters to collect nanoparticles from the exhaust gas of a carbon nanotube furnace. New agglomerates were found on filters from such emitted particles, and the performance of using the filters studied was encouraging in terms of capturing emissions from carbon nanotube synthesis.

Harnessing Quantum Capacitance in 2D Material/Molecular Layer Junctions for Novel Electronic Device Functionality.

Two-dimensional (2D) materials promise advances in electronic devices beyond Moore's scaling law through extended functionality, such as non-monotonic dependence of device parameters on input parameters. However, the robustness and performance of effects like negative differential resistance (NDR) and anti-ambipolar behavior have been limited in scale and robustness by relying on atomic defects and complex heterojunctions. In this paper, we introduce a novel device concept that utilizes the quantum capacitance of junctions between 2D materials and molecular layers. We realized a variable capacitance 2D molecular junction (vc2Dmj) diode through the scalable integration of graphene and single layers of stearic acid. The vc2Dmj exhibits NDR with a substantial peak-to-valley ratio even at room temperature and an active negative resistance region. The origin of this unique behavior was identified through thermoelectric measurements and ab initio calculations to be a hybridization effect between graphene and the molecular layer. The enhancement of device parameters through morphology optimization highlights the potential of our approach toward new functionalities that advance the landscape of future electronics.

Confined VLS Growth of Single-Layer 2D Tungsten Nitrides.

Two-dimensional (2D) metal nitrides have garnered significant interest due to their potential applications in future electronics and quantum systems. However, the synthesis of such materials with sufficient uniformity and at relevant scales remains an unaddressed challenge. This study demonstrates the potential of confined growth to control and enhance the morphology of 2D metal nitrides. By restricting the reaction volume of vapor-liquid-solid reactions, an enhanced precursor concentration was achieved that reduces the nucleation density, resulting in larger grain sizes and suppression of multilayer growth. Detailed characterization reveals the importance of balancing the energetic and kinetic aspects of tungsten nitride formation toward this ability. The introduction of a promoter enabled the realization of large-scale, single-layer tungsten nitride with a uniform and high interfacial quality. Finally, our advance in morphology control was applied to the production of edge-enriched 2D tungsten nitrides with significantly enhanced hydrogen evolution ability, as indicated by an unprecedented Tafel slope of 55 mV/dec.

Selective activation of MoS2 grain boundaries for enhanced electrochemical activity.

Molybdenum disulfide (MoS2) has emerged as a promising material for catalysis and sustainable energy conversion. However, the inertness of its basal plane to electrochemical reactions poses challenges to the utilization of wafer-scale MoS2 in electrocatalysis. To overcome this limitation, we present a technique that enhances the catalytic activity of continuous MoS2 by preferentially activating its buried grain boundaries (GBs). Through mild UV irradiation, a significant enhancement in GB activity was observed that approaches the values for MoS2 edges, as confirmed by a site-selective photo-deposition technique and micro-electrochemical hydrogen evolution reaction (HER) measurements. Combined spectroscopic characterization and ab-initio simulation demonstrates substitutional oxygen functionalization at the grain boundaries to be the origin of this selective catalytic enhancement by an order of magnitude. Our approach not only improves the density of active sites in MoS2 catalytic processes but yields a new photocatalytic conversion process. By exploiting the difference in electronic structure between activated GBs and the basal plane, homo-compositional junctions were realized that improve the photocatalytic synthesis of hydrogen by 47% and achieve performances beyond the capabilities of other catalytic sites.

A novel class of strain gauges based on layered percolative films of 2D materials.

Here we report on the fabrication and characterization of a novel type of strain gauge based on percolative networks of 2D materials. The high sensitivity of the percolative carrier transport to strain induced morphology changes was exploited in strain sensors that can be produced from a wide variety of materials. Highly reliable and sensitive graphene-based thin film strain gauges were produced from solution processed graphene flakes by spray deposition. Control of the gauge sensitivity could be exerted through deposition-induced changes to the film morphology. This exceptional property was explained through modeling of the strain induced changes to the flake-flake overlap for different percolation networks. The ability to directly deposit strain gauges on complex-shaped and transparent surfaces was presented. The demonstrated scalable fabrication, superior sensitivity over conventional sensors, and unique properties of the described strain gauges have the potential to improve existing technology and open up new fields of applications for strain sensors.

Synthesis of monolayer hexagonal boron nitride on Cu foil using chemical vapor deposition.

Hexagonal boron nitride (h-BN) is very attractive for many applications, particularly, as protective coating, dielectric layer/substrate, transparent membrane, or deep ultraviolet emitter. In this work, we carried out a detailed investigation of h-BN synthesis on Cu substrate using chemical vapor deposition (CVD) with two heating zones under low pressure (LP). Previous atmospheric pressure (AP) CVD syntheses were only able to obtain few layer h-BN without a good control on the number of layers. In contrast, under LPCVD growth, monolayer h-BN was synthesized and time-dependent growth was investigated. It was also observed that the morphology of the Cu surface affects the location and density of the h-BN nucleation. Ammonia borane is used as a BN precursor, which is easily accessible and more stable under ambient conditions than borazine. The h-BN films are characterized by atomic force microscopy, transmission electron microscopy, and electron energy loss spectroscopy analyses. Our results suggest that the growth here occurs via surface-mediated growth, which is similar to graphene growth on Cu under low pressure. These atomically thin layers are particularly attractive for use as atomic membranes or dielectric layers/substrates for graphene devices.

Exciton Manipulation for Enhancing Photoelectrochemical Hydrogen Evolution Reaction in Wrinkled 2D Heterostructures.

2D materials' junctions have demonstrated capabilities as metal-free alternatives for the hydrogen evolution reaction (HER). To date, the HER has been limited to heterojunctions of different compositions or band structures. Here, the potential of local strain modulation based on wrinkled 2D heterostructures is demonstrated, which helps to realize photoelectrocatalytically active junctions. By forming regions of high and low tensile strain in wrinkled WS2 monolayers, local modification of their band structure and internal electric field due to piezoelectricity is realized in the lateral direction. This structure produces efficient electron-hole pair generation due to light trapping and exciton funneling toward the crest of the WS2 wrinkles and enhances exciton separation. Additionally, the formation of wrinkles induces an air gap in-between the 2D layer and substrate, which reduces the interfacial scattering effect and consequently improves the charge-carrier mobility. A detailed study of the strain-dependence of the photocatalytic HER process demonstrates a 2-fold decrease in the Tafel slope and a 30-fold enhancement in exchange current density. Finally, optimization of the light absorption through functionalization with quantum dots produces unprecedented photoelectrocatalytic performance and provides a route toward the scalable formation of strain-modulated WS2 nanojunctions for future green energy generation.

Nitrogen Pretreatment of Growth Substrates for Vacancy-Saturated MoS2.

Two-dimensional transition-metal dichalcogenides (2D TMDCs) are considered promising materials for optoelectronics due to their unique optical and electric properties. However, their potential has been limited by the occurrence of atomic vacancies during synthesis. While post-treatment processes have demonstrated the passivation of such vacancies, they increase process complexity and affect the TMDC's quality. We here introduce the concept of pretreatment as a facile and powerful route to solve the problem of vacancies in MoS2. Low-temperature nitridation of the sapphire substrate prior to growth provides a nondestructive method to MoS2 modification without introducing new processing steps or increasing the thermal budget. Spectroscopic characterization and atomic-resolution microscopy reveal the incorporation of nitrogen from the sapphire surface layer into chalcogen vacancies. The resulting MoS2 with nitrogen-saturated defects shows a decrease in midgap states and more intrinsic doping as confirmed by ab initio calculations and optoelectronic measurements. The demonstrated pretreatment method opens up new routes toward future, high-performance 2D electronics, as evidenced by a 3-fold reduction in contact resistance and a 10-fold improved performance of 2D photodetectors.

Vacancy-plane-mediated exfoliation of sub-monolayer 2D pyrrhotite.

Conventional exfoliation exploits the anisotropy in bonding or compositional character to delaminate 2D materials with large lateral size and atomic thickness. This approach, however, limits the choice to layered host crystals with a specific composition. Here, we demonstrate the exfoliation of a crystal along planes of ordered vacancies as a novel route toward previously unattainable 2D crystal structures. Pyrrhotite, a non-stoichiometric iron sulfide, was utilized as a prototype system due to its complex vacancy superstructure. Bulk pyrrhotite crystals were synthesized by gas-assisted bulk conversion, and their diffraction pattern revealed a 4C superstructure with 3 vacancy interfaces within the unit cell. Electrochemical intercalation and subsequent delamination yield ultrathin 2D flakes with a large lateral extent. Atomic force microscopy confirms that exfoliation occurs at all three supercell interfaces, resulting in the isolation of 2D structures with sub-unit cell thicknesses of 1/2 and 1/4 monolayers. The impact of controlling the morphology of 2D materials below the monolayer limit on 2D magnetic properties was investigated. Bulk pyrrhotite was shown to exhibit ferrimagnetic ordering that agrees with theoretical predictions and that is retained after exfoliation. A complex magnetic domain structure and an enhanced impact of vacancy planes on magnetization emphasize the potential of our synthesis approach as a powerful platform for modulating magnetic properties in future electronics and spintronics.

Ultrahigh-quality graphene resonators by liquid-based strain-engineering.

Two-dimensional (2D) material-based nanoelectromechanical (NEM) resonators are expected to be enabling components in hybrid qubits that couple mechanical and electromagnetic degrees of freedom. However, challenges in their sensitivity and coherence time have to be overcome to realize such mechanohybrid quantum systems. We here demonstrate the potential of strain engineering to realize 2D material-based resonators with unprecedented performance. A liquid-based tension process was shown to enhance the resonance frequency and quality factor of graphene resonators six-fold. Spectroscopic and microscopic characterization reveals a surface-energy enhanced wall interaction as the origin of this effect. The response of our tensioned resonators is not limited by external loss factors and exhibits near-ideal internal losses, yielding superior resonance frequencies and quality factors to all previously reported 2D material devices. Our approach represents a powerful method of enhancing 2D NEM resonators for future quantum systems.