RESUMO
The low frequency magnetic field detection ability of magnetoresistive (MR)sensor is seriously affected by 1/f noise. At present, the method to suppress the influence of low frequency noise is mainly to modulate the measured magnetic field by mechanical resonance. In this paper, a novel modulation concept employing a magnetoelectric coupling effect is proposed. A design method of modulation structure based on an equivalent magnetic circuit model (EMCM) and a single domain model of in-plane moment was established. An EMCM was established to examine the relationship between the permeability of flux modulation film (FMF) and modulation efficiency, which was further verified through a finite element simulation model (FESM). Then, the permeability modulated by the voltage of a ferroelectric/ferromagnetic (FE/FM) multiferroic heterostructure was theoretically studied. Combining these studies, the modulation structure and the material were further optimized, and a FeSiBPC/PMN-PT sample was prepared. Experimental results show that the actual magnetic susceptibility modulation ability of FeSiBPC/PMN-PT reached 150 times, and is in good agreement with the theoretical prediction. A theoretical modulation efficiency higher than 73% driven by a voltage of 10 V in FeSiBPC/PMN-PT can be obtained. These studies show a new concept for magnetoelectric coupling application, and establish a new method for magnetic field modulation with a multiferroic heterostructure.
RESUMO
In many plants, anthocyanin biosynthesis is affected by environmental conditions. Ultraviolet-B (UV-B) radiation promotes anthocyanin accumulation and fruit coloration in apple skin, whereas high temperature suppresses these processes. In this study, we characterized a B-box transcription factor, MdCOL4, from 'Fuji' apple, and identified its role in anthocyanin biosynthesis by overexpressing its encoding gene in apple red callus. The expression of MdCOL4 was reduced by UV-B, but promoted by high temperature. We explored the regulatory relationship between heat shock transcription factors (HSFs) and MdCOL4, and found that MdHSF3b and MdHSF4a directly bound to the heat shock element cis-element of the MdCOL4 promoter. MdCOL4 interacted with MdHY5 to synergistically inhibit the expression of MdMYB1, and MdCOL4 directly bound to the promoters of MdANS and MdUFGT, which encode genes in the anthocyanin biosynthetic pathway, to suppress their expression. Our findings shed light on the molecular mechanism by which MdCOL4 suppresses anthocyanin accumulation in apple skin under UV-B and high temperature.
Assuntos
Frutas/metabolismo , Malus/metabolismo , Antocianinas/metabolismo , Frutas/efeitos da radiação , Regulação da Expressão Gênica de Plantas/efeitos da radiação , Temperatura Alta , Malus/efeitos da radiação , Proteínas de Plantas/metabolismo , Plantas Geneticamente Modificadas/metabolismo , Plantas Geneticamente Modificadas/efeitos da radiação , Temperatura , Fatores de Transcrição/metabolismo , Raios UltravioletaRESUMO
Ultraviolet-B (UV-B) radiation and low temperature promote the accumulation of anthocyanins, which give apple skins their red colour. Although many transcription regulators have been characterized in the UV-B and low-temperature pathways, their interregulation and synergistic effects are not well understood. Here, a B-box transcription factor gene, MdBBX20, was characterized in apple and identified to promote anthocyanin biosynthesis under UV-B conditions in field experiments and when overexpressed in transgenic apple calli. The transcript level of MdBBX20 was significantly induced by UV-B. Specific G-box elements in the promoters of target genes were identified as interaction sites for MdBBX20. Further experimental interrogation of the UV-B signalling pathways showed that MdBBX20 could interact with MdHY5 in vitro and in vivo and that this interaction was required to significantly enhance the promoter activity of MdMYB1. MdBBX20 also responded to low temperature (14°C) with the participation of MdbHLH3, which directly bound a low temperature-response cis elements in the MdBBX20 promoter. These findings demonstrate the molecular mechanism by which MdBBX20 integrates low-temperature- and UV-B-induced anthocyanin accumulation in apple skin.
Assuntos
Antocianinas/biossíntese , Temperatura Baixa , Malus/metabolismo , Malus/efeitos da radiação , Proteínas Repressoras/metabolismo , Proteínas Repressoras/ultraestrutura , Dedos de Zinco/efeitos da radiação , Fatores de Transcrição de Zíper de Leucina Básica/metabolismo , Clonagem Molecular , Cor , Frutas/genética , Frutas/metabolismo , Regulação da Expressão Gênica de Plantas , Malus/genética , Proteínas de Plantas/genética , Proteínas de Plantas/metabolismo , Plantas Geneticamente Modificadas/metabolismo , Regiões Promotoras Genéticas , Proteínas Repressoras/genética , Fatores de Transcrição/genética , Raios Ultravioleta , Dedos de Zinco/genética , Dedos de Zinco/fisiologiaRESUMO
To improve the sensitivity of the magnetic tunnel junction(MTJ)sensor, a novel architecture for a double-gap magnetic flux concentrator (MFC) was studied theoretically and experimentally in this paper. The three-dimensional finite element model of magnetic flux was established to optimize the magnetic field amplification factor, with different gaps. The simulation results indicate that the sensitivity of an MTJ sensor with a double-gap MFC can be significantly better than that of a sensor with a traditional single-gap MFC, due to the fact that the magnetic magnification sharply increases with the decrease in effective gap width. Besides this, the half-bridge MTJ sensors with the double-gap MFC were fabricated using photolithography, ion milling, evaporation, and electroplating processes. Experimental results show that the sensitivity of the MTJ sensor increased by ten times compared to the sensor without the double-gap MFC, which underlines the theoretical predictions. Furthermore, there is no significant increase in the sensor noise. The work in this paper contributes to the development of high-performance MTJ sensors.
RESUMO
The perception of fish locomotion is important for understanding their adaptive behaviors and ethological characteristics. However, the main strategy used for extracting fish attitudes involves the use of a vision-based monitoring system, which is limited in its range of observation and cannot perform tracking for long times. Here, we report the use of a wearable tagging electronic device, referred to as an underwater vest, to capture the surrounding flow field disturbances triggered by swimming or momentary postural changes. All of these goals were achieved by integrating a pair of pseudocapacitive pressure-sensing units and a flexible circuit board. Notably, additional conditions, such as variable hydraulic pressures and minimal changes in fish posture, require high stability and sensitivity of the sensing units. Thus, hybrid hydrogel electrodes were developed through cross-linking MXene with holey-reduced graphene oxide nanosheets and further modification with 1-ethyl-3-methylimidazolium dicyanamide ionic liquids, which increased the interfacial capacitance and long-term interfacial activity of the MXene. Consequently, the sensing unit exhibited ultrahigh sensitivity (Smax~136,207 kPa-1) in an aquatic environment for 60 days and superior high-pressure resolution (10 Pa) within a wide working range of 1 MPa. Ultimately, an underwater vest integrated with such sensing units clearly distinguished and recorded fish locomotion. We believe that the designed device may open avenues in flow field monitoring and ocean current detection and provide new insights into the development of sensitive underwater tagging.
RESUMO
Thermal barrier coating (TBC) of turbine blades can prevent aeroengine damage resulting from high temperature. TBC exhibits a multilayer complex structure of ceramic and bonding layers. The ceramic layer is dielectric, whereas the bonding layer is conductive. Disabling either layer can endanger aircraft safety. Changes in TBC parameters are indicative of failure. This study proposed a neural-network-based method to inverse the three key parameters of TBC simultaneously based on electromagnetic/capacitive dual-module sensor. Thus, this method can be used for monitoring the status of aeroengines. The experimental results revealed that the inversion error of thickness and permittivity of the ceramic layer and the conductivity of the bonding layer is less than 2%. Therefore, the proposed method can satisfy application requirements.
RESUMO
Underwater flexible sensors have a future for wide application, which is promising for attaching them to underwater creatures to monitor vital signals and biomechanical analysis of their motion and perceive tiny environmental disturbances. However, the pressure waves induced by biological swimming are extremely weak and susceptible to undercurrents, making them difficult to sense. Here, we report an ultrahighly sensitive biomimetic electronic fish skin designed by embedding an artificial pseudocapacitive-based hair cell into a simulated canal neuromast encapsulation structure, in which the artificial hair cell, as the key sensitive unit, is assembled from hybrid film electrodes and polyurethane-acidic electrolyte foam. Such a film is prepared by inter-cross-linking MXene and holey reduced graphene oxide with the assistance of l-cysteine, effectively increasing the interfacial capacitance and alleviating the oxidation issues of MXene. Meanwhile, the acidic foam with high porosity shows great compressibility to adapt to a high-pressure underwater environment. Consequently, the device exhibits ultrahighly sensitivity (maximum sensitivity â¼173688 kPa-1) over a wide range of depths (0-100 m) and remains stable after 10000 repeated tests. As an example case, the device is integrated as a motion monitoring system to identify the minor disturbances triggered by instantaneous postural changes of fish. The electronic fish skin is expected to demonstrate enormous potentials in flow field monitoring, ocean current detecting, and even seismic waves warning.
Assuntos
Dispositivos Eletrônicos Vestíveis , Animais , Eletrônica , PoliuretanosRESUMO
Magnetic interferential compensation plays a vital role in geomagnetic vector measurement applications. Traditional compensation accounts for only the permanent interferences, induced field interferences, and eddy-current interferences. However, nonlinear magnetic interferences are found, which also have a great impact on measurement, and it cannot be fully characterized by a linear compensation model. This paper proposes a new compensation method based on a back propagation neural network, which can reduce the influence of the linear model on compensation accuracy due to its good nonlinear mapping capabilities. The high-quality network training requires representative datasets, yet it is a common problem in the engineering field. To provide adequate data, this paper adopts a 3D Helmholtz coil to restore the magnetic signal of a geomagnetic vector measurement system. A 3D Helmholtz coil is more flexible and practical than the geomagnetic vector measurement system itself when generating abundant data under different postures and applications. Simulations and experiments are both conducted to prove the superiority of the proposed method. According to the experiment, the proposed method can reduce the root mean square errors of north, east, and vertical components and the total intensity from 73.25, 68.54, 70.45, and 101.77 nT to 23.35, 23.58, 27.42, and 29.72 nT, respectively, compared with the traditional method.
RESUMO
Flexible pressure sensors developed rapidly with increased sensitivity, a fast response time, high stability, and excellent deformability. These progresses have expanded the application of wearable electronics under high-pressure backgrounds while also bringing new challenges. In particular, the nonlinearity and narrow working range lead to a gradually insensitive response, principally because the microstructure deforms inconsistently on the device interfaces in the whole working range. Herein, we report an ionic flexible sensor with a record-high linearity (R2 = 0.99994) in a wide working range (up to 600 kPa). The linearity response comes from the normal-direction graded hemisphere (GH) microstructure. It is prepared from poly(dimethylsiloxane) (PDMS)/carbon nanotubes (CNTs)/Au into flexible and deformable electrodes, and its geometry is precisely designed from the linear elastic theory and optimized through finite element simulation. The sensor can achieve a high sensitivity of S = 165.5 kPa-1, a response-relaxation time of <30 ms, and superb consistency, allowing the device to detect vibration signals. Our sensor has been assembled with circuits and capsulation in order to monitor the function state of players in underwater sports in the frequency domain. This work deepens the theory of linearized design of microstructures and provides a strategy to make flexible pressure sensors that have combined the performances of ultrahigh linearity, high sensitivity, and a wide working range.
RESUMO
A broad linear range of ionic flexible sensors (IFSs) with high sensitivity is vital to guarantee accurate pressure acquisition and simplify back-end circuits. However, the issue that sensitivity gradually decreases as the applied pressure increases hinders the linearity over the whole working range and limits its wide-ranging application. Herein, we design a two-scale random microstructure ionic gel film with rich porosity and a rough surface. It increases the buffer space during compression, enabling the stress deformation to be more uniform, which makes sure that the sensitivity maintains steady as the pressure loading. In addition, we develop electrodes with multilayer graphene produced by a roll-to-roll process, utilizing its large interlayer spacing and ion-accessible surface area. It benefits the migration and diffusion of ions inside the electrolyte, which increases the unit area capacitance and sensitivity, respectively. The IFS shows ultra-high linearity and a linear range (correlation coefficient â¼ 0.9931) over 0-1 MPa, an excellent sensitivity (â¼12.8 kPa-1), a fast response and relaxation time (â¼20 and â¼30 ms, respectively), a low detection limit (â¼2.5 Pa), and outstanding mechanical stability. This work offers an available path to achieve wide-range linear response, which has potential applications for attaching to soft robots, followed with sensing slight disturbances induced by ships or submersibles.
RESUMO
Magnetic flux vertical modulation method based on piezoelectric resonance can reduce the 1/f noise of tunnel magnetoresistance (TMR) magnetic sensor and significantly improves the low-frequency magnetic field detectivity. However, the amplitude variation of the modulation structure will lead to the instability of the sensor output. In order to improve the amplitude stability of the modulation structure, an amplitude control method based on the amplitude ratio of the first and second harmonic components of the modulated signal was proposed. Compared with the piezoelectric or capacitive feedback method, this method does not require an independent amplitude conversion circuit, and has the advantages of simple structure, high control efficiency and strong anti-interference ability. The experimental results showed that the amplitude and temperature drift of the modulated structure was significantly suppressed, which is of great significance for enhancing the adaptability of the TMR magnetic sensor to the application environments.
RESUMO
The strong spin filtering effect can be produced by C-Ni atomic orbital hybridization in lattice-matched graphene/Ni (111) heterostructures, which provides an ideal platform to improve the tunnel magnetoresistance (TMR) of magnetic tunnel junctions (MTJs). However, large-area, high-quality graphene/ferromagnetic epitaxial interfaces are mainly limited by the single-crystal size of the Ni (111) substrate and well-oriented graphene domains. In this work, based on the preparation of a 2-inch single-crystal Ni (111) film on an Al2O3 (0001) wafer, we successfully achieve the production of a full-coverage, high-quality graphene monolayer on a Ni (111) substrate with an atomically sharp interface via ambient pressure chemical vapor deposition (APCVD). The high crystallinity and strong coupling of the well-oriented epitaxial graphene/Ni (111) interface are systematically investigated and carefully demonstrated. Through the analysis of the growth model, it is shown that the oriented growth induced by the Ni (111) crystal, the optimized graphene nucleation and the subsurface carbon density jointly contribute to the resulting high-quality graphene/Ni (111) heterostructure. Our work provides a convenient approach for the controllable fabrication of a large-area homogeneous graphene/ferromagnetic interface, which would benefit interface engineering of graphene-based MTJs and future chip-level 2D spintronic applications.
RESUMO
The magnetic tunneling junction (MTJ) controlled by electric field as an alternate approach for energy efficiency is the highlight for nonvolatile RAM, while there is still a lack of research on resistance manipulation with the electric field in nanoscale MTJs. In this study, we integrated nanoscale MTJs on the (011) orientated Pb(Mg1/3Nb2/3)0.7Ti0.3O3 (PMN-PT) ferroelectric substrates and systematically investigated the magnetoresistance as a function of the magnetic field and electric field. A single domain state of the nanoscale MTJ was demonstrated by the experimental result and theoretical simulation. Afterward, the obvious electric field control of R-H curves was obtained and explained by the competition between magnetoelastic energy and shape anisotropy. More importantly, simulation results also predicted that the switching pathway of magnetic moments under the magnetic field is strongly dependent on the applied electric field, displaying the electric field control of chiral switching in the nano-MTJ. Our work is a milestone in the realization of the emerging dubbed straintronics field.
RESUMO
A thermal barrier coating (TBC), which is composed of a top coating (TC) and bond coating (BC), can keep a turbine engine working in high temperature. The TC is an insulated ceramic layer, and the BC is a conductive layer between the TC and engine blade. Owing to poor working conditions, some failures such as sintering, thinning of coating thickness, and oxide layer initiation will occur in the TBC. Once any part of the TBC fails, it will seriously threaten the safety of the aircraft. The quantitative detection of TBC parameters is realized with the electromagnetic/capacitive dual modality sensor in this paper. The measurement grid algorithm is used to inverse the thickness of the TC layer and the conductivity of the BC layer, and an analytical method is proposed to inverse the relative permittivity of the TC layer. According to the experiment, the inversion errors of these parameters are all less than 4%, which can meet the industry needs well.
RESUMO
Ultraviolet-B (UV-B) radiation promotes anthocyanin synthesis in many plants. Although several transcription factors promote anthocyanin synthesis in response to UV-B radiation, the underlying mechanism remains unclear. In this study, the MdWRKY72 transcription factor gene was isolated from the 'Taishanzaoxia' apple genome. Quantitative real-time PCR analyses revealed that the genes encoding enzymes and transcription factors involved in the anthocyanin synthesis pathway (MdANS, MdDFR, MdUFGT, and MdMYB1) were more highly expressed in MdWRKY72-overexpressing transgenic calli than in the wild-type 'Orin' apple calli. The results indicated that MdWRKY72 increases anthocyanin synthesis in transgenic calli exposed to UV-B radiation. The results of a gel shift assay and chromatin immunoprecipitation proved that MdWRKY72 promotes MdMYB1 expression indirectly by binding to a W-box element in the MdHY5 promoter and directly by binding to a W-box element in the MdMYB1 promoter. Thus, MdWRKY72 increases anthocyanin synthesis via direct and indirect mechanisms. These findings may be useful for elucidating the molecular mechanism underlying UV-B-induced anthocyanin synthesis mediated by MdWRKY72.
Assuntos
Antocianinas/biossíntese , Malus/genética , Proteínas de Plantas/genética , Fatores de Transcrição/genética , Sequência de Aminoácidos , Antocianinas/genética , Sequência de Bases , Imunoprecipitação da Cromatina , Ensaio de Desvio de Mobilidade Eletroforética , Malus/metabolismo , Filogenia , Proteínas de Plantas/química , Proteínas de Plantas/metabolismo , Plantas Geneticamente Modificadas/genética , Plantas Geneticamente Modificadas/metabolismo , Alinhamento de Sequência , Fatores de Transcrição/química , Fatores de Transcrição/metabolismoRESUMO
Magnetic modulation methods especially Micro-Electro-Mechanical System (MEMS) modulation can improve the sensitivity of magnetoresistive (MR) sensors dramatically, and pT level detection of Direct Current (DC) magnetic field can be realized. While in a Low Frequency Alternate Current (LFAC) magnetic field measurement situation, frequency measurement is limited by a serious spectrum aliasing problem caused by the remanence in sensors and geomagnetic field, leading to target information loss because frequency indicates the magnetic target characteristics. In this paper, a compensation field produced with integrated coils is applied to the MR sensor to remove DC magnetic field distortion, and a LFAC magnetic field frequency estimation algorithm is proposed based on a search of the database, which is derived from the numerical model revealing the relationship of the LFAC frequency and determination factor [defined by the ratio of Discrete Fourier Transform (DFT) coefficients]. In this algorithm, an inverse modulation of sensor signals is performed to detect jumping-off point of LFAC in the time domain; this step is exploited to determine sampling points to be processed. A determination factor is calculated and taken into database to figure out frequency with a binary search algorithm. Experimental results demonstrate that the frequency measurement resolution of the LFAC magnetic field is improved from 12.2 Hz to 0.8 Hz by the presented method, which, within the signal band of a magnetic anomaly (0.04-2 Hz), indicates that the proposed method may expand the applications of magnetoresistive (MR) sensors to human healthcare and magnetic anomaly detection (MAD).
RESUMO
Frequency estimation is a fundamental problem in many applications, such as traditional vibration measurement, power system supervision, and microelectromechanical system sensors control. In this paper, a fast and accurate frequency estimation algorithm is proposed to deal with low efficiency problem in traditional methods. The proposed algorithm consists of coarse and fine frequency estimation steps, and we demonstrate that it is more efficient than conventional searching methods to achieve coarse frequency estimation (location peak of FFT amplitude) by applying modified zero-crossing technique. Thus, the proposed estimation algorithm requires less hardware and software sources and can achieve even higher efficiency when the experimental data increase. Experimental results with modulated magnetic signal show that the root mean square error of frequency estimation is below 0.032 Hz with the proposed algorithm, which has lower computational complexity and better global performance than conventional frequency estimation methods.
RESUMO
1∕f noise is one of the main noise sources of magnetoresistive (MR) sensors, which can cause intrinsic detection limit at low frequency. To suppress this noise, the solution of flux concentration and vertical motion modulation (VMM) has been proposed. Magnetic hysteresis in MR sensors is another problem, which degrades their response linearity and detection ability. To reduce this impact, the method of pulse magnetization and magnetic compensation field with integrated planar coils has been introduced. A flux concentration and VMM based magnetoresistive prototype sensor with integrated planar coils was fabricated using microelectromechanical-system technology. The response linearity of the prototype sensors is improved from 0.8% to 0.12%. The noise level is reduced near to the thermal noise level, and the low-frequency detection ability of the prototype sensor is enhanced with a factor of more than 80.
RESUMO
Recently, the flux modulation has been presented to deal with the 1/f noise of magnetoresistive (MR) sensors. However, the efficiency of most flux modulation schemes with simple micro- electromechanical-system (MEMS) actuators is not satisfying yet. In this paper, the vertical motion flux modulation (VMFM) is proposed to improve the modulation efficiency. In VMFM, the soft magnetic film driven by a MEMS actuator vibrates vertically above the MR sensors with a pair of flux concentrators. Consequently, the detected magnetostatic field is modulated to the higher frequency where the 1/f noise is much lower. A VMFM prototype based on AA002 (multi-layered giant magnetoresistive sensors) was fabricated and its flux modulation efficiency can reach 18.7%, which exceeds most achieved efficiency with other schemes. Also, the magnetostatic detection ability is improved to 530 pT/âHz.