High-entropy polymer produces a giant electrocaloric effect at low fields.

More than a decade of research on the electrocaloric (EC) effect has resulted in EC materials and EC multilayer chips that satisfy a minimum EC temperature change of 5 K required for caloric heat pumps1-3. However, these EC temperature changes are generated through the application of high electric fields4-8 (close to their dielectric breakdown strengths), which result in rapid degradation and fatigue of EC performance. Here we report a class of EC polymer that exhibits an EC entropy change of 37.5 J kg-1 K-1 and a temperature change of 7.5 K under 50 MV m-1, a 275% enhancement over the state-of-the-art EC polymers under the same field strength. We show that converting a small number of the chlorofluoroethylene groups in poly(vinylidene fluoride-trifluoroethylene-chlorofluoroethylene) terpolymer into covalent double bonds markedly increases the number of the polar entities and enhances the polar-nonpolar interfacial areas of the polymer. The polar phases in the polymer adopt a loosely correlated, high-entropy state with a low energy barrier for electric-field-induced switching. The polymer maintains performance for more than one million cycles at the low fields necessary for practical EC cooling applications, suggesting that this strategy may yield materials suitable for use in caloric heat pumps.

Thickness- and Field-Dependent Magnetic Domain Evolution in van der Waals Fe3GaTe2.

The discovery of room-temperature ferromagnetism in van der Waals (vdW) materials opens new avenues for exploring low-dimensional magnetism and its applications in spintronics. Recently, the observation of the room-temperature topological Hall effect in the vdW ferromagnet Fe3GaTe2 suggests the possible existence of room-temperature skyrmions, yet skyrmions have not been directly observed. In this study, real-space imaging was employed to investigate the domain evolution of the labyrinth and skyrmion structure. First, Néel-type skyrmions can be created at room temperature. In addition, the influence of flake thickness and external magnetic field (during field cooling) on both labyrinth domains and the skyrmion lattice is unveiled. Due to the competition between magnetic anisotropy and dipole interactions, the specimen thickness significantly influences the density of skyrmions. These findings demonstrate that Fe3GaTe2 can host room-temperature skyrmions of various sizes, opening up avenues for further study of magnetic topological textures at room temperature.

Ultrahigh-Efficiency Superior Energy Storage in Lead-Free Films with a Simple Composition.

Dielectric capacitors are highly desired in modern electronic devices and power systems to store and recycle electric energy. However, achieving simultaneous high energy density and efficiency remains a challenge. Here, guided by theoretical and phase-field simulations, we are able to achieve a superior comprehensive property of ultrahigh efficiency of 90-94% and high energy density of 85-90 J cm-3 remarkably in strontium titanate (SrTiO3), a linear dielectric of a simple chemical composition, by manipulating local symmetry breaking through introducing Ti/O defects. Atomic-scale characterizations confirm that these Ti/O defects lead to local symmetry breaking and local lattice strains, thus leading to the formation of the isolated ultrafine polar nanoclusters with varying sizes from 2 to 8 nm. These nanoclusters account for both considerable dielectric polarization and negligible polarization hysteresis. The present study opens a new realm of designing high-performance dielectric capacitors utilizing a large family of readily available linear dielectrics with very simple chemistry.

Realizing Outstanding Energy Storage Performance in KBT-Based Lead-Free Ceramics via Suppressing Space Charge Accumulation.

The great potential of K1/2Bi1/2TiO3 (KBT) for dielectric energy storage ceramics is impeded by its low dielectric breakdown strength, thereby limiting its utilization of high polarization. This study develops a novel composition, 0.83KBT-0.095Na1/2Bi1/2ZrO3-0.075 Bi0.85Nd0.15FeO3 (KNBNTF) ceramics, demonstrating outstanding energy storage performance under high electric fields up to 425 kV cm-1: a remarkable recoverable energy density of 7.03 J cm-3, and a high efficiency of 86.0%. The analysis reveals that the superior dielectric breakdown resistance arises from effective mitigation of space charge accumulation at the interface, influenced by differential dielectric and conductance behaviors between grains and grain boundaries. Electric impedance spectra confirm the significant suppression of space charge accumulation in KNBNTF, attributable to the co-introduction of Na1/2Bi1/2ZrO3 and Bi0.85Nd0.15FeO3. Phase-field simulations reveal the emergence of a trans-granular breakdown mode in KNBNTF resulting from the mitigated interfacial polarization, impeding breakdown propagation and increasing dielectric breakdown resistance. Furthermore, KNBNTF exhibits a complex local polarization and enhances the relaxor features, facilitating high field-induced polarization and establishing favorable conditions for exceptional energy storage performance. Therefore, the proposed strategy is a promising design pathway for tailoring dielectric ceramics in energy storage applications.

High-entropy enhanced capacitive energy storage.

Electrostatic dielectric capacitors are essential components in advanced electronic and electrical power systems due to their ultrafast charging/discharging speed and high power density. A major challenge, however, is how to improve their energy densities to effectuate the next-generation applications that demand miniaturization and integration. Here, we report a high-entropy stabilized Bi2Ti2O7-based dielectric film that exhibits an energy density as high as 182 J cm-3 with an efficiency of 78% at an electric field of 6.35 MV cm-1. Our results reveal that regulating the atomic configurational entropy introduces favourable and stable microstructural features, including lattice distorted nano-crystalline grains and a disordered amorphous-like phase, which enhances the breakdown strength and reduces the polarization switching hysteresis, thus synergistically contributing to the energy storage performance. This high-entropy approach is expected to be widely applicable for the development of high-performance dielectrics.

Morphotropic Phase Boundary in Polarized Organic Piezoelectric Materials.

Designing the morphotropic phase boundary (MPB) has been the most sought-after approach to achieve high piezoelectric performance of piezoelectric materials. However, MPB has not yet been found in the polarized organic piezoelectric materials. Here, we discover MPB with biphasic competition of ß and 3/1-helical phases in the polarized piezoelectric polymer alloys (PVTC-PVT) and demonstrate a mechanism to induce MPB using the compositionally tailored intermolecular interaction. Consequently, PVTC-PVT exhibits a giant quasistatic piezoelectric coefficient of >32 pC/N while maintaining a low Young's modulus of 182 MPa, with a record-high figure of merit of piezoelectricity modulus of about 176 pC/(N·GPa) among all piezoelectric materials.

Multiple Local Symmetries Result in a Common Average Polar Axis in High-Strain BiFeO_{3}-Based Ceramics.

For the first time, the origin of large electrostrain in pseudocubic BiFeO_{3}-based ceramics is verified with direct structural evidence backed by appropriate simulations. We employ advanced structural and microstructural characterizations of BiFeO_{3}-based ceramics that exhibit large electrostrain (>0.4%) to reveal the existence of multiple, nanoscale local symmetries, dominantly tetragonal or orthorhombic, which have a common, averaged direction of polarization over larger, meso- or microscale regions. Phase-field simulations confirm the existence of local nanoscale symmetries, thereby providing a new vision for designing high-performance lead-free ceramics for high-strain actuators.

Prominent Size Effects without a Depolarization Field Observed in Ultrathin Ferroelectric Oxide Membranes.

The increasing miniaturization of electronics requires a better understanding of material properties at the nanoscale. Many studies have shown that there is a ferroelectric size limit in oxides, below which the ferroelectricity will be strongly suppressed due to the depolarization field, and whether such a limit still exists in the absence of the depolarization field remains unclear. Here, by applying uniaxial strain, we obtain pure in-plane polarized ferroelectricity in ultrathin SrTiO_{3} membranes, providing a clean system with high tunability to explore ferroelectric size effects especially the thickness-dependent ferroelectric instability with no depolarization field. Surprisingly, the domain size, ferroelectric transition temperature, and critical strain for room-temperature ferroelectricity all exhibit significant thickness dependence. These results indicate that the stability of ferroelectricity is suppressed (enhanced) by increasing the surface or bulk ratio (strain), which can be explained by considering the thickness-dependent dipole-dipole interactions within the transverse Ising model. Our study provides new insights into ferroelectric size effects and sheds light on the applications of ferroelectric thin films in nanoelectronics.

Tip-Induced In-Plane Ferroelectric Superstructure in Zigzag-Wrinkled BaTiO3 Thin Films.

The complex micro-/nanoscale wrinkle morphology primarily fabricated by elastic polymers is usually designed to realize unique functionalities in physiological, biochemical, bioelectric, and optoelectronic systems. In this work, we fabricated inorganic freestanding BaTiO3 ferroelectric thin films with zigzag wrinkle morphology and successfully modulated the ferroelectric domains to form an in-plane (IP) superstructure with periodic surface charge distribution. Our piezoresponse force microscopy (PFM) measurements and phase-field simulation demonstrate that the self-organized strain/stress field in the zigzag-wrinkled BaTiO3 film generates a corresponding pristine domain structure. These domains can be switched by tip-induced strain gradient (flexoelectricity) and naturally form a robust and unique "braided" in-plane domain pattern, which enables us to offer an effective and convenient way to create a microscopic ferroelectric superstructure. The corresponding periodic surface potential distribution provides an extra degree of freedom in addition to the morphology that could regulate cells or polar molecules in physiological and bioelectric applications.

Giant Room-Temperature Electrocaloric Effect of Polymer-Ceramic Composites with Orientated BaSrTiO3 Nanofibers.

Cooling based on the electrocaloric effect (ECE) is a promising solution to environmental and energy efficiency problems of vapor-compression refrigeration. Ferroelectric polymer-ceramics nanocomposites, integrating high electric breakdown of organic ferroelectrics and large EC strength of ceramics, are attractive EC materials. Here, we tuned the orientation of Ba0.67Sr0.33TiO3 nanofibers (BST nfs) in the P(VDF-TrFE-CFE) polymer. When the nfs were aligned parallel to the field, a ΔT of 11.3 K with an EC strength of 0.16 K·m/MV was achieved in the blends. The EC strength not only surpasses advanced nanocomposites but also is comparable to ferroelectric ceramics. The simulation indicates that a significantly higher electric field is concentrated in polymer regions around the ends of the orientated nfs, contributing to easier flipping of polymer chains for large ECE. This work provides a new method to obtain large ECE in composites for next-generation refrigeration.

How Far Can We Push the Rigid Oligomers/Polymers toward Ferroelectric Nematic Liquid Crystals?

The emerging ferroelectric nematic (NF) liquid crystal is a novel 3D-ordered liquid exhibiting macroscopic electric polarization. The combination of the ultrahigh dielectric constant, strong nonlinear optical signal, and high sensitivity to the electric field makes NF materials promising for the development of advanced liquid crystal electroopic devices. Previously, all studies focused on the rod-shaped small molecules with limited length (l) range and dipole moment (µ) values. Here, through the precision synthesis, we extend the aromatic rod-shaped mesogen to oligomer/polymer (repeat unit up to 12 with monodisperse molecular-weight dispersion) and increase the µ value over 30 Debye (D). The NF phase has a widespread existence far beyond our expectation and could be observed in all the oligomer/polymer length range. Notably, the NF phase experiences a nontrivial evolution pathway with the traditional apolar nematic phase completely suppressed, i.e., the NF phase nucleates directly from the isotropic liquid phase. The discovery of thte ferroelectric packing of oligomer/polymer rods not only offers the concept of extending the NF state to oligomers/polymers but also provides some previously overlooked insights in oxybenzoate-based liquid crystal polymer materials.

Bioinspired Wear-Resistant and Ultradurable Functional Gradient Coatings.

For mechanically protective coatings, the coating material usually requires sufficient stiffness and strength to resist external forces and meanwhile matched mechanical properties with the underneath substrate to maintain the structural integrity. These requirements generate a conflict that limits the coatings from achieving simultaneous surface properties (e.g., high wear-resistance) and coating/substrate interfacial durability. Herein this conflict is circumvented by developing a new manufacturing technique for functional gradient coatings (FGCs) with the material composition and mechanical properties gradually varying crossing the coating thickness. The FGC is realized by controlling the spatial distribution of magnetic-responsive nanoreinforcements inside a polymer matrix through a magnetic actuation process. By concentrating the reinforcements with hybrid sizes at the surface region and continuously diminishing toward the coating/substrate interface, the FGC is demonstrated to exhibit simultaneously high surface hardness, stiffness, and wear-resistance, as well as superb interfacial durability that outperforms the homogeneous counterparts over an order of magnitude. The concept of FGC represents a mechanically optimized strategy in achieving maximal performances with minimal use and site-specific distribution of the reinforcements, in accordance with the design principles of many load-bearing biological materials. The presented manufacturing technique for gradient nanocomposites can be extended to develop various bioinspired heterogeneous materials with desired mechanical performances.

Role of Reversible Phase Transformation for Strong Piezoelectric Performance at the Morphotropic Phase Boundary.

A functional material with coexisting energetically equivalent phases often exhibits extraordinary properties such as piezoelectricity, ferromagnetism, and ferroelasticity, which is simultaneously accompanied by field-driven reversible phase transformation. The study on the interplay between such phase transformation and the performance is of great importance. Here, we have experimentally revealed the important role of field-driven reversible phase transformation in achieving enhanced electromechanical properties using in situ high-energy synchrotron x-ray diffraction combined with 2D geometry scattering technology, which can establish a comprehensive picture of piezoelectric-related microstructural evolution. High-throughput experiments on various Pb/Bi-based perovskite piezoelectric systems suggest that reversible phase transformation can be triggered by an electric field at the morphotropic phase boundary and the piezoelectric performance is highly related to the tendency of electric-field-driven phase transformation. A strong tendency of phase transformation driven by an electric field generates peak piezoelectric response. Further, phase-field modeling reveals that the polarization alignment and the piezoelectric response can be much enhanced by the electric-field-driven phase transformation. The proposed mechanism will be helpful to design and optimize the new piezoelectrics, ferromagnetics, or other related functional materials.

Purely electric-field-driven perpendicular magnetization reversal.

If achieved, magnetization reversal purely with an electric field has the potential to revolutionize the spintronic devices that currently utilize power-dissipating currents. However, all existing proposals involve the use of a magnetic field. Here we use phase-field simulations to study the piezoelectric and magnetoelectric responses in a three-dimensional multiferroic nanostructure consisting of a perpendicularly magnetized nanomagnet with an in-plane long axis and a juxtaposed ferroelectric nanoisland. For the first time, we demonstrate a full reversal of perpendicular magnetization via successive precession and damping, driven purely by a perpendicular electric-field pulse of certain pulse duration across the nanoferroelectric. We discuss the materials selection and size dependence of both nanoferroelctrics and nanomagnets for experimental verification. These results offer new inspiration to the design of spintronic devices that simultaneously possess high density, high thermal stability, and high reliability.

Surface Effect of Thickness-Dependent Polarization and Domain Evolution in BiFeO3 Epitaxial Ultrathin Films.

With the trend of device miniaturization, ultrathin ferroelectric films are gaining more and more attention. However, understanding ferroelectricity in this nanoscale context remains a formidable challenge, primarily due to the heightened relevance of surface effects, which often leads to the loss of net polarization. Here, the influence of surface effects on the polarization as a function of thickness in ultrathin BiFeO3 films is investigated using phase-field simulations. The findings reveal a notable increase in ferroelectric polarization with increasing thickness, with a particularly discernible change occurring below the 10 nm threshold. Upon accounting for surface effects, the polarization is marginally lower than the case without such considerations, with the disparity becoming more pronounced at smaller thicknesses. Moreover, the hysteresis loop and butterfly loop of the ultrathin film were simulated, demonstrating that the ferroelectric properties of films remain robust even down to a thickness of 5 nm. Our investigations provide valuable insights into the significance of ferroelectric thin films in device miniaturization.

Low-k nano-dielectrics facilitate electric-field induced phase transition in high-k ferroelectric polymers for sustainable electrocaloric refrigeration.

Ferroelectric polymer-based electrocaloric effect may lead to sustainable heat pumps and refrigeration owing to the large electrocaloric-induced entropy changes, flexible, lightweight and zero-global warming potential. Herein, low-k nanodiamonds are served as extrinsic dielectric fillers to fabricate polymeric nanocomposites for electrocaloric refrigeration. As low-k nanofillers are naturally polar-inactive, hence they have been widely applied for consolidate electrical stability in dielectrics. Interestingly, we observe that the nanodiamonds markedly enhances the electrocaloric effect in relaxor ferroelectrics. Compared with their high-k counterparts that have been extensively studied in the field of electrocaloric nanocomposites, the nanodiamonds introduces the highest volumetric electrocaloric enhancement (~23%/vol%). The resulting polymeric nanocomposite exhibits concurrently improved electrocaloric effect (160%), thermal conductivity (175%) and electrical stability (125%), which allow a fluid-solid coupling-based electrocaloric refrigerator to exhibit an improved coefficient of performance from 0.8 to 5.3 (660%) while maintaining high cooling power (over 240 W) at a temperature span of 10 K.

Electrically and mechanically driven rotation of polar spirals in a relaxor ferroelectric polymer.

Topology created by quasi-continuous spatial variations of a local polarization direction represents an exotic state of matter, but field-driven manipulation has been hitherto limited to creation and destruction. Here we report that relatively small electric or mechanical fields can drive the non-volatile rotation of polar spirals in discretized microregions of the relaxor ferroelectric polymer poly(vinylidene fluoride-ran-trifluoroethylene). These polar spirals arise from the asymmetric Coulomb interaction between vertically aligned helical polymer chains, and can be rotated in-plane through various angles with robust retention. Given also that our manipulation of topological order can be detected via infrared absorption, our work suggests a new direction for the application of complex materials.

Mechanical manipulation for ordered topological defects.

Randomly distributed topological defects created during the spontaneous symmetry breaking are the fingerprints to trace the evolution of symmetry, range of interaction, and order parameters in condensed matter systems. However, the effective mean to manipulate topological defects into ordered form is elusive due to the topological protection. Here, we establish a strategy to effectively align the topological domain networks in hexagonal manganites through a mechanical approach. It is found that the nanoindentation strain gives rise to a threefold Magnus-type force distribution, leading to a sixfold symmetric domain pattern by driving the vortex and antivortex in opposite directions. On the basis of this rationale, sizeable mono-chirality topological stripe is readily achieved by expanding the nanoindentation to scratch, directly transferring the randomly distributed topological defects into an ordered form. This discovery provides a mechanical strategy to manipulate topological protected domains not only on ferroelectrics but also on ferromagnets/antiferromagnets and ferroelastics.

Achieving giant electrostrain of above 1% in (Bi,Na)TiO3-based lead-free piezoelectrics via introducing oxygen-defect composition.

Piezoelectric ceramics have been extensively used in actuators, where the magnitude of electrostrain is key indicator for large-stroke actuation applications. Here, we propose an innovative strategy based on defect chemistry to form a defect-engineered morphotropic phase boundary and achieve a giant strain of 1.12% in lead-free Bi0.5Na0.5TiO3 (BNT)-based ceramics. The incorporation of the hypothetical perovskite BaAlO2.5 with nominal oxygen defect into BNT will form strongly polarized directional defect dipoles, leading to a strong pinning effect after aging. The large asymmetrical strain is mainly attributed to two factors: The defect dipoles along crystallographic [001] direction destroy the long-range ordering of the ferroelectric and activate a reversible phase transition while promoting polarization rotation when the dipoles are aligned along the applied electric field. Our results not only demonstrate the potential application of BNT-based materials in low-frequency, large-stroke actuators but also provide a general methodology to achieve large strain.

Single-Crystalline BaZr0.2 Ti0.8 O3 Membranes Enabled High Energy Density in PEI-Based Composites for High-Temperature Electrostatic Capacitors.

Dielectric capacitors are promising for high power energy storage, but their breakdown strength (Eb ) and energy density (Ue ) usually degrade rapidly at high temperatures. Adding boron nitride (BN) nanosheets can improve the Eb and high-temperature endurance but with a limited Ue due to its low dielectric constant. Here, freestanding single-crystalline BaZr0.2 Ti0.8 O3 (BZT) membranes with high dielectric constant are fabricated, and introduced into BN doped polyetherimide (PEI) to obtain laminated PEI-BN/BZT/PEI-BN composites. At room temperature, the composite shows a maximum Ue of 17.94 J cm-3  at 730 MV m-1 , which is more than two times the pure PEI. Particularly, the composites exhibit excellent dielectric-temperature stability between 25 and 150 °C. An outstanding Ue  = 7.90 J cm-3  is obtained at a relatively large electric field of 650 MV m-1  under 150 °C, which is superior to the most high-temperature dielectric capacitors reported so far. Phase-field simulation reveals that the depolarization electric field generated at the BZT/PEI-BN interfaces can effectively reduce carrier mobility, leading to the remarkable enhancement of the Eb and Ue over a wide temperature range. This work provides a promising and scalable route to develop sandwich-structured composites with prominent energy storage performances for high-temperature capacitive applications.