Electropolymerization of Preferred-Oriented Conjugated Microporous Polymer Films for Enhanced Fluorescent Sensing.

High-quality conjugated microporous polymer (CMP) films with orientation and controlled structure are extremely desired for applications. Here, we report the effective construction of CMP 3D composite films (pZn/PTPCz) with a controlled porosity structure and preferred orientation using the template-assisted electropolymerization (EP) approach for the first time. The structure of pZn/PTPCz composite thin films and nitrophenol sensing performance were thoroughly studied. When compared to the control CMP film made on flat indium tin oxide (ITO) substrates, the as-prepared pZn/PTPCz composite films showed significantly enhanced fluorescent intensity and much better sensing performance for the model explosive. This was attributed to the metal-enhanced fluorescence (MEF) of porous nanostructured zinc (pZn) and the additional macroporosity of the pZn/PTPCz composite films. This work provides a feasible approach for creating oriented 3D CMP-based thin films for advanced applications.

Challenges and opportunities in commercializing whole-cell bioreporters in environmental application.

Since the initial introduction of whole-cell bioreporters (WCBs) nearly 30 years ago, their high sensitivity, selectivity, and suitability for on-site detection have rendered them highly promising for environmental monitoring, medical diagnosis, food safety, biomanufacturing, and other fields. Especially in the environmental field, the technology provides a fast and efficient way to assess the bioavailability of pollutants in the environment. Despite these advantages, the technology has not been commercialized. This lack of commercialization is confusing, given the broad application prospects of WCBs. Over the years, numerous research papers have focused primarily on enhancing the sensitivity and selectivity of WCBs, with little attention paid to their wider commercial applications. So far, there is no a critical review has been published yet on this topic. Therefore, in this article we critically reviewed the research progress of WCBs over the past three decades, assessing the performance and limitations of current systems to understand the barriers to commercial deployment. By identifying these obstacles, this article provided researchers and industry stakeholders with deeper insights into the challenges hindering market entry and inspire further research toward overcoming these barriers, thereby facilitating the commercialization of WCBs as a promising technology for environmental monitoring.

Impact of the COVID-19 on electricity consumption of open university campus buildings - The case of Twente University in the Netherlands.

Since the COVID-19 outbreak, the restrictive policies enacted by countries in response to the epidemic have led to changes in the movement of people in public places, which has had a direct impact on the use and energy consumption of various public buildings. This study was based on electricity consumption data for 25 on-campus public buildings at 1-hour intervals between January 2020 and June 2022 at Tewnte University in the Netherlands, and after the data were climate-corrected by multiple regression analysis, the changes in EU and EUI for various types of buildings were compared for different restriction periods using ANOVA, LSD and t-tests. And additionally, further analyzed the changes and reasons for the electricity consumption of various public buildings on campus and customers' electricity consumption behavior in a period of time after the lifting of the epidemic restriction policy. The results of ANOVA analysis show that the restriction policy has a significant effect on teaching, sports, and cultural buildings, and the electricity intensity of the three types of buildings is reduced by 0.28, 0.09, and 0.07 kwh/m2/day respectively under the strict restriction policy; The t-test results show that during the restriction period, all building types, except for living and academic buildings, show a significant decreasing trend, with the teaching buildings having the greatest energy saving potential, with an average daily EU reduction of 1088kwh/day and an EUI reduction of 0.075kwh/ m2/day. The above findings provide a case study of a complete cycle of energy consumption changes in university buildings under similar epidemic restriction policies before and after the epidemic restriction, and inform the electricity allocation policies of university and government energy management authorities.

Molten Salt Shielded Synthesis of Monodisperse Layered CaZnOS-Based Semiconductors for Piezophotonic and X-Ray Detection Applications.

CaZnOS-based semiconductors are the only series of material system discovered that can simultaneously realize a large number of dopant elements to directly fulfill the highly efficient full-spectrum functionality from ultraviolet to near-infrared under the same force/pressure. Nevertheless, owing to the high agglomeration of the high temperature solid phase manufacturing process, which is unable to control the crystal morphology, the application progress is limited. Here, the authors report first that CaZnOS-based fine monodisperse semiconductor crystals with various doping ions are successfully synthesized by a molten salt shielded method in an air environment. This method does not require inert gas ventilation, and therefore can greatly reduce the synthesis cost and more importantly improve the fine control of the crystal morphology, along with the crystals' dispersibility and stability. These doped semiconductors can not only realize different colors of mechanical-to-optical energy conversion, but also can achieve multicolor luminescence under low-dose X-ray irradiation, moreover their intensities are comparable to the commercial NaI:Tl. They can pave the way to the new fields of advanced optoelectronic applications, such as piezophotonic systems, mechanical energy conversion and harvesting devices, intelligent sensors, and artificial skin as well as X-ray applications.

Electricity consumption variation of public buildings in response to COVID-19 restriction and easing policies: A case study in Scotland, U.K.

A growing number of studies have showed energy demand changes during COVID-19; this study aims to further disclose the impact of the restriction and easing policies on the energy consumption of public buildings where occupants' usage and activities are regulated in response to the pandemic. This study analyzes half-hourly electricity consumption data of 35 public buildings covering 6 building types in the Perth and Kinross Council area in Scotland, U.K., over the span of 2020 and 2021. The results show that the restriction has a greater impact on the electricity reduction in the first year of the pandemic than that in the second year. In response to the restriction, the electricity use intensity of all public buildings reduces significantly (p < 0.001) except office buildings with no significant reduction (p > 0.05); secondary schools have the highest electricity consumption reduction (275.04 kwh/day), while museums have the lowest reduction (58.62 kwh/day). In addition, the electricity consumption and electricity use intensity of museum, library and school buildings are inversely proportional to the restriction intensity, while this is opposite for office buildings. Combing restriction intensity and mobility data, this research reveals the different impacts of the restriction policies on the electricity consumption of public buildings during the pandemic, which reflects people's changing attitudes and behaviors towards COVID-19. The results provide a reference basis for energy management to develop more realistic energy demand policies based on public building types and to optimize the electricity supply load and energy profile during the COVID-19 pandemic.

[Effects and Mechanisms of Polystyrene Microplastics on Extracellular Antibiotic Resistance Genes in Wastewater].

Microplastics (MPs) and antibiotic resistance genes (ARGs) are typical co-existing emerging pollutants in wastewater treatment plants. MPs have been shown to alter the distribution pattern of ARGs in sludge, but their effects on free extracellular ARGs (feARGs) in wastewater remain unclear. In this study, we used fluorescence quantitative PCR to investigate the dynamics of feARGs (including tetC, tetO, sul1, and sul2) in wastewater and their transition mechanisms after 60 d of exposure to typical MPs (polystyrene, PS). The results showed that the absolute abundance of tetracycline feARGs decreased by 28.4 %-76.0 % and 35.2 %-96.2 %, respectively, under nm-level and mm-level PS exposure and changed by -55.4 %-122.4 % under µm-level PS exposure. The abundance of sul1 showed a trend of nm-level > µm-level > mm-level upon PS exposure, and the changes in sul1 abundance was greater with ρ(PS)=50 mg·L-1 exposure. The relative abundance of sul2 was reduced by 25.4 %-42.6 % and 46.1 %-90.3 % after µm-level and mm-level PS exposure, respectively, and increased by 1.9-3.9 times after nm-level PS exposure, and the sul2 showed a higher reduction at ρ (PS)=50 mg·L-1 exposure than that at ρ (PS)=0.5 mg·L-1. The Pearson correlation analysis showed that the relative abundance of feARGs during PS exposure was positively correlated with cell membrane permeability and typical mobile genetic elements (intI1) abundance and negatively correlated with reactive oxygen species level. Our findings elucidated the effects and corresponding mechanisms of PS on the growth and mobility of feARGs in wastewater, providing a scientific basis for the control of the combined MPs and ARGs pollution in wastewater.

Unveiling the role of uranium in enhancing the transformation of antibiotic resistance genes.

Transformation represents one of the most important pathways for the horizontal transfer of antibiotic resistance genes (ARGs), which enables competent bacteria to acquire extracellular ARGs from the surrounding environment. Both heavy metals and irradiation have been demonstrated to influence the bacterial transformation process. However, the impact of ubiquitously occurring radioactive heavy metals on the transformation of ARGs remains largely unknown. Here, we showed that a representative radioactive nuclide, uranium (U), at environmental concentrations (0.005-5 mg/L), improved the transformation frequency of resistant plasmid pUC19 into Escherichia coli by 0.10-0.85-fold in a concentration-dependent manner. The enhanced ARGs transformation ability under U stress was demonstrated to be associated with reactive oxygen species (ROS) overproduction, membrane damage, and up-regulation of genes related to DNA uptake and recombination. Membrane permeability and ROS production were the predominant direct and indirect factors affecting transformation ability, respectively. Our findings provide valuable insight into the underlying mechanisms of the impacts of U on the ARGs transformation process and highlight concerns about the exacerbated spread of ARGs in radioactive heavy metal-contaminated ecosystems, especially in areas with nuclear activity or accidents.

Impact of uranium on antibiotic resistance in activated sludge.

The emergence of antibiotic resistance genes (ARGs) and antibiotic-resistant bacteria (ARB) in the environment is well established as a human health crisis. The impact of radioactive heavy metals on ecosystems and ultimately on human health has become a global issue, especially for the regions suffering various nuclear activities or accidents. However, whether the radionuclides can affect the fate of antibiotic resistance in bacteria remains poorly understood. Here, the dynamics of ARB, three forms of ARGs-intracellular ARGs (iARGs), adsorbed extracellular ARGs (aeARGs), and free extracellular ARGs (feARGs)-and microbial communities were investigated following exposure to uranium (U), a representative radioactive heavy metal. The results showed that 90-d of U exposure at environmentally relevant concentrations of 0.05 mg/L or 5 mg/L significantly increased the ARB concentration in activated sludge (p < 0.05). Furthermore, 90-d of U exposure slightly elevated the absolute abundance of aeARGs (except tetO) and sulfonamide iARGs, but decreased tetracycline iARGs. Regarding feARGs, the abundance of tetC, tetO, and sul1 decreased after 90-d of U stress, whereas sul2 showed the opposite trend. Partial least-squares path model analysis revealed that the abundance of aeARGs and iARGs under U stress was predominantly driven by increased cell membrane permeability/intI1 abundance and cell membrane permeability/reactive oxygen species concentration, respectively. Conversely, the changes in feARGs abundance depended on the composition of the microbial community and the expression of efflux pumps. Our findings shed light on the variations of ARGs and ARB in activated sludge under U exposure, providing a more comprehensive understanding of antibiotic resistance risks aggravated by radioactive heavy metal-containing wastewater.

Modulating Smart Mechanoluminescent Phosphors for Multistimuli Responsive Optical Wood.

Mechanoluminescence is a smart light-emitting phenomenon in which applied mechanical energy is directly converted into photon emissions. In particular, mechanoluminescent materials have shown considerable potential for applications in the fields of energy and sensing. This study thoroughly investigates the mechanoluminescence and long afterglow properties of singly doped and codoped Sr2 MgSi2 O7 (SMSO) with varying concentrations of Eu2+ and Dy3+ ions. Subsequently, a comprehensive analysis of its multimode luminescence properties, including photoluminescence, mechanoluminescence, long afterglow, and X-ray-induced luminescence, is conducted. In addition, the density of states mapping is acquired through first-principles calculations, confirming that the enhanced mechanoluminescence properties of SMSO primarily stem from the deep trap introduced by Dy3+ . In contrast to traditional mixing with Polydimethylsiloxane, in this study, the powders are incorporated into optically transparent wood to produce a multiresponse with mechanoluminescence, long afterglow, and X-ray-excited luminescence. This structure is achieved by pretreating natural wood, eliminating lignin, and subsequently modifying the wood to overall modification using various smart phosphors and epoxy resin composites. After natural drying, a multifunctional composite wood structure with diverse luminescence properties is obtained. Owing to its environmental friendliness, sustainability, self-power, and cost-effectiveness, this smart mechanoluminescence wood is anticipated to find extensive applications in construction materials and energy-efficient displays.

Energy justice in education sector: The impact of student demographics on elementary and secondary school energy consumption.

Reducing school energy costs has become an important issue, while the energy saving should consider different school systems and student backgrounds. This study investigated the impact of student demographics on energy consumption in elementary and secondary schools and explores the difference of energy consumption in different types and levels of school systems. Data were collected from 3672 schools (including 3108 elementary and 564 secondary schools, respectively) in Ontario, Canada. The number of students whose first language is not English, the number of students who receive special education services, the number of school-aged children who live in low-income households, and student learning ability are all inversely proportional to energy consumption; student learning ability has the largest negative impact. The partial correlation between student enrollment and energy consumption has a trend of gradually increasing as the grade levels increase in Catholic elementary schools, Catholic secondary schools, and public secondary schools; however, the correlation shows a gradually decreasing trend with the increase in grade levels in public elementary schools. This study is helpful for policy-makers to clarify the energy implications of various student backgrounds and the energy consumption difference in different types and levels of school systems to facilitate their formulation of effective policies.

Smart Mechanoluminescent Phosphors: A Review of Strontium-Aluminate-Based Materials, Properties, and Their Advanced Application Technologies.

Mechanoluminescence, a smart luminescence phenomenon in which light energy is directly produced by a mechanical force, has recently received significant attention because of its important applications in fields such as visible strain sensing and structural health monitoring. Up to present, hundreds of inorganic and organic mechanoluminescent smart materials have been discovered and studied. Among them, strontium-aluminate-based materials are an important class of inorganic mechanoluminescent materials for fundamental research and practical applications attributed to their extremely low force/pressure threshold of mechanoluminescence, efficient photoluminescence, persistent afterglow, and a relatively low synthesis cost. This paper presents a systematic and comprehensive review of strontium-aluminate-based luminescent materials' mechanoluminescence phenomena, mechanisms, material synthesis techniques, and related applications. Besides of summarizing the early and the latest research on this material system, an outlook is provided on its environmental, energy issue and future applications in smart wearable devices, advanced energy-saving lighting and displays.

[Chemerin induces insulin resistance in C2C12 cells through nuclear factor-κB pathway-mediated inflammatory reaction].

OBJECTIVE: To explore the insulin resistance-inducing effect of chemerin on murine C2C12 myoblasts and the underlying molecular mechanism. METHODS: Following 24-hour treatment with various concentrations of chemerin (0, 10, 100) ng/mL and 30-minute insulin stimulation in C2C12 cells, the glucose uptake was evaluated using a fluorescence microplate reader. ELISA was used to detect the levels of interleukin-6 (IL-6), IL-8 and tumor necrosis factor α (TNF-α) in culture fluid. In addition, the expression of nuclear factor κB (NF-κB) was determined by Western blotting. The underlying mechanism involved in chemerin-induced insulin resistance was evaluated with the precondition of NF-κB blocker pyrrolidine dithiocarbamate (PDTC). RESULTS: Chemerin inhibited the glucose uptake of C2C12 cells in a dose-dependent manner, concomitant with the increases of IL-6, IL-8, TNF-α levels. Furthermore, chemerin stimulation improved the expression of NF-κB. However, pretreatment with NF-κB blocker PDTC significantly abated the inhibitory effect of chemerin on glucose uptake, and also obviously decreased the levels of IL-6, IL-8 and TNF-α induced by chemerin. CONCLUSION: Chemerin might induce insulin resistance in C2C12 cells through NF-κB pathway-mediated inflammatory reaction.

The development of 7E chromosome-specific molecular markers for Thinopyrum elongatum based on SLAF-seq technology.

Thinopyrum elongatum is an important relative of wheat, it is favored by many researchers for the disease resistant genes that exist in its E genome. Some studies have showed that the 7E chromosome of Th. elongatum contains resistance genes related to Fusarium head blight and wheat rust. Therefore, developing 7E chromosome-specific molecular markers linked to resistance genes will provide an important tool for exploring and using the resistant genes of Th. elongatum. In addition, it would greatly contribute in the effort to cultivate disease-resistant wheat varieties. Featured in high throughput, high-accuracy and low-cost, SLAF-seq technology has been widely used in molecular breeding, system evolution, and germplasm resource detection. Based on SLAF-seq, 518 specific fragments on the 7E chromosome of Th. elongatum were successfully amplified. A total of 135 primers were designed according to 135 randomly selected fragments, and 89 specific molecular markers of Th. elongatum were developed, with efficiencies up to 65.9%. These markers were all detected in a variety of materials, and they are all proved to be specific and stable. These markers can be used not only for detecting the 7E chromosome of Th. elongatum but also for providing an important theoretical and practical basis for wheat breeding by marker-assisted selection (MAS). This paper reports the first application of SLAF-seq technology with a high success rate in developing specific molecular markers for Th. elongatum, providing a strong case for the application of this new technology.