RESUMO
Since the last decade, carbon nanomaterials have had a notable impact on different fields such as bioimaging, drug delivery, artificial tissue engineering, and biosensors. This is due to their good compatibility toward a wide range of chemical to biological molecules, low toxicity, and tunable properties. Especially for biosensor technology, the characteristic features of each dimensionality of carbon-based materials may influence the performance and viability of their use. Surface area, porous network, hybridization, functionalization, synthesis route, the combination of dimensionalities, purity levels, and the mechanisms underlying carbon nanomaterial interactions influence their applications in bioanalytical chemistry. Efforts are being made to fully understand how nanomaterials can influence biological interactions, to develop commercially viable biosensors, and to gain knowledge on the biomolecular processes associated with carbon. Here, we present a comprehensive review highlighting the characteristic features of the dimensionality of carbon-based materials in biosensing.
Assuntos
Técnicas Biossensoriais , Nanoestruturas , Carbono/química , Nanoestruturas/química , Sistemas de Liberação de Medicamentos , Técnicas Biossensoriais/métodosRESUMO
We present here a bottom-up approach for realizing on-chip on-demand batteries starting out with chemical vapor deposition-grown graphene. Single graphene monolayers contacted by electrode lines on a silicon chip serve as electrodes. The anode and cathode are realized by electrodeposition of zinc and copper respectively onto graphene, leading to the realization of a miniature graphene-based Daniell cell on a chip. The electrolyte is housed partly in a gel and partly in liquid form in an on-chip enclosure molded using a 3d printer or made out of poly(dimethylsiloxane). The realized batteries provide a stable voltage (â¼1.1 V) for many hours and exhibit capacities as high as 15 µAh, providing enough power to operate a pocket calculator. The realized batteries show promise for deployment as on-chip power sources for autonomous systems in lab-on-a-chip or biomedical applications.
RESUMO
Direct electron transfer (DET) between redox enzymes and electrode surfaces is of growing interest and an important strategy in the development of biofuel cells and biosensors. Among the nanomaterials utilized at electrode/enzyme interfaces to enhance the electronic communication, graphene oxide (GO) has been identified as a highly promising candidate. It is postulated that GO layers decrease the distance between the flavin cofactor (FAD/FADH2) of the glucose oxidase enzyme (GOx) and the electrode surface, though experimental evidence concerning the distance dependence of the rate constant for heterogeneous electron-transfer (k(het)) has not yet been observed. In this work, we report the experimentally observed DET of the GOx enzyme adsorbed on flexible carbon fiber (FCF) electrodes modified with GO (FCF-GO), where the k(het) between GO and electroactive GOx has been measured at a structurally well-defined interface. The curves obtained from the Marcus theory were used to obtain k(het), by using the model proposed by Chidsey. In agreement with experimental data, this model proved to be useful to systematically probe the dependence of electron transfer rates on distance, in order to provide an empirical basis to understand the origin of interfacial DET between GO and GOx. We also demonstrate that the presence of GO at the enzyme/electrode interface diminishes the activation energy by decreasing the distance between the electrode surface and FAD/FADH2.
Assuntos
Eletrodos , Glucose Oxidase/química , Grafite/química , Modelos Químicos , Modelos Moleculares , Simulação por Computador , Condutividade Elétrica , Transporte de Elétrons , Ativação Enzimática , Teste de Materiais , Óxidos/químicaRESUMO
Hydrogenases are enzymes that catalyze the reversible conversion of protons to hydrogen gas, using earth-abundant metals such as nickel and/or iron. This characteristic makes them promising for sustainable energy applications, particularly in clean hydrogen production. However, their widespread use faces challenges, including a limited pH range and susceptibility to oxygen. In response to these issues, SacCoMyo is introduced as an artificial enzyme. SacCoMyo is designed by replacing the native metal in the myoglobin (Myo) scaffold with a hydroxocobalamin (Co) porphyrin core and complemented by a protective heteropolysaccharide-linked (Sac) shell. This engineered protein proves to be resilient, maintaining robust functionality even in acidic environments and preventing denaturation in a pH 1 electrolyte. The cobalt porphyrin core of SacCoMyo reduces the activation overpotential for hydrogen generation. A high turnover frequency of about 2400 H2 s-1 is demonstrated in the presence of molecular oxygen, showcasing its potential in biohydrogen production and its ability to overcome the limitations associated with natural hydrogenases.
Assuntos
Hidrogenase , Porfirinas , Hidrogênio/química , Cobalto , Oxigênio/química , Apoenzimas , Hidrogenase/química , Concentração de Íons de HidrogênioRESUMO
A new approach is described to produce an efficient electrode material for biofuel cells using flexible carbon cloth (FCC) and hollow core-mesoporous shell carbon (HCMSC) nanospheres as bio-anode materials. The bio-electrochemical activity of glucose oxidase (GOx) enzyme adsorbed on this bio-anode was evaluated, with the maximum anodic current density varying from 80 microA cm(-2) to 180 microA cm-2 for glucose concentrations up to 5.0 mmol L(-1) for the FCC modified electrode with HCMSCs. The open circuit cell voltage was E(0) = 380 mV, and the catalytic electro-oxidation current of glucose reached 0.1 mA cm(-2) at 0.0 V versus Ag/AgCl. This new system employing HCMSC-based FCC is promising toward novel bio-anodes for biofuel cells using glucose as a fuel.
Assuntos
Fontes de Energia Bioelétrica , Biocombustíveis , Eletrodos , Glucose Oxidase/química , Glucose/química , Nanotubos de Carbono/química , Nanotubos de Carbono/ultraestrutura , Módulo de Elasticidade , Desenho de Equipamento , Análise de Falha de Equipamento , Tamanho da Partícula , TêxteisRESUMO
In this paper, we investigate the affinity of palladium nanoparticles, stabilized with glucose oxidase, for fatty acid monolayers at the air-water interface, exploiting the interaction between a planar system and spheroids coming from the aqueous subphase. A decrease of the monolayer collapse pressure in the second cycle of interface compression proved that the presence of the nanoparticles causes destabilization of the monolayer in a mechanism driven by the interpenetration of the enzyme into the bilayer/multilayer structure formed during collapse, which is not immediately reversible after monolayer expansion. Surface pressure and surface potential-area isotherms, as well as infrared spectroscopy [polarization modulation infrared reflection adsorption spectroscopy (PM-IRRAS)] and deposition onto solid plates as Langmuir-Blodgett (LB) films, were employed to construct a model in which the nanoparticle has a high affinity for the hydrophobic core of the structure formed after collapse, which provides a slow desorption rate from the interface after monolayer decompression. This may have important consequences on the interaction between the metallic particles and fatty acid monolayers, which implies the regulation of the multifunctional properties of the hybrid material.
Assuntos
Ácidos Graxos/química , Nanopartículas Metálicas/química , Paládio/química , Adsorção , Ar , Ácidos Graxos/metabolismo , Glucose Oxidase/química , Glucose Oxidase/metabolismo , Paládio/metabolismo , Tamanho da Partícula , Propriedades de Superfície , Água/químicaRESUMO
Self-assembled materials consisting of V(2)O(5), polyallylamine (PAH) and silver nanoparticles (AgNPs) were obtained by the layer-by-layer (LbL) method, aiming at their application as electrodes for lithium-ion batteries and electrochromic devices. The method employed herein allowed for linear growth of visually homogeneous films composed of V(2)O(5), V(2)O(5)/PAH, and V(2)O(5)/PAH/AgNP with 15 bilayers. According to the Fourier transform infrared spectra, interaction between the oxygen atom of the vanadyl group and the amino group should be responsible for the growth of these films. This interaction also enabled establishment of an electrostatic shield between the lithium ions and the sites with higher negative charge, thereby raising the ionic mobility and consequently increasing the energy storage capacity and reducing the response time. According to the site-saturation model and the electrochemical and spectroelectrochemical results, the presence of PAH in the self-assembled host matrix decreased the number of V(2)O(5) electroactive sites. Thus, AgNPs were stabilized in PAH and inserted into the nanoarchitecture, so as to enhance the specific capacity. This should provide new conducting pathways and connect isolated V(2)O(5) particles in the host matrix. Therefore, new nanoarchitectures for specific interactions were formed spontaneously and chosen as examples in this work, aiming to demonstrate the potentiality of the adopted self-assembled method for enhancing the charge transport rate into the host matrices. The obtained materials displayed suitable properties for use as electrodes in lithium batteries and electrochromic devices.
Assuntos
Lítio/química , Fontes de Energia Elétrica , Técnicas Eletroquímicas , Eletrodos , Íons/química , Nanopartículas Metálicas/química , Tamanho da Partícula , Poliaminas/química , Prata/química , Propriedades de Superfície , Compostos de VanádioRESUMO
This paper presents studies about the molecular interactions and redox processes involved in the formation of palladium nanoparticles associated to glucose oxidase (GOx-PdNPs) in a supramolecular arrangement. The synthesis occurs in two steps, the Pd reduction and the formation of the 80 nm sized supramolecular aggregates containing multiples units of GOx associated to 3.5 nm sized PdNPs. During synthesis, GOx molecules interact with Pd salt leading to metal ion and FAD reduction probably via the thiol group of the cysteine 521 residue. For the growing of PdNPs, formic acid was necessary as a co-adjuvant reducing agent. Besides the contribution for the redox processes, GOx is also necessary for the NP stability preventing the formation of precipitates resulted from uncontrolled growing of NPs Cyclic voltammetry of the GOx-PdNPs demonstrated electroactivity of the bionanocomposite immobilized on ITO (indium-tin oxide) electrode surface and also the NP is partially blocked due to strong interaction GOx and the surface of PdNPs. Vibrational spectroscopy (FTIR) showed that significant structural changes occurred in GOx after the association to PdNP. These mechanistics and structural studies can contribute for modulation of bionanocomposites properties.
Assuntos
Aspergillus niger/enzimologia , Enzimas Imobilizadas/química , Glucose Oxidase/química , Nanopartículas/química , Paládio/química , Eletroquímica , Nanopartículas/ultraestrutura , Oxirredução , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
We present a versatile and simple method using electrochemistry for the exclusive functionalization of the edge of a graphene monolayer with metal nanoparticles or polymeric amino groups. The attachment of metal nanoparticles allows us to exploit surface-enhanced Raman scattering to characterize the chemistry of both the pristine and the functionalized graphene edge. For the pristine patterned graphene edge, we observe the typical edge-related modes, while for the functionalized graphene edge we identify the chemical structure of the functional layer by vibrational fingerprinting. The ability to obtain single selectively functionalized graphene edges routinely on an insulating substrate opens an avenue for exploring the effect of edge chemistry on graphene properties systematically.
RESUMO
Correction for 'pH sensitivity of interfacial electron transfer at a supported graphene monolayer' by Michel Wehrhold et al., Nanoscale, 2019, DOI: 10.1039/c9nr05049c.
RESUMO
Electrochemical devices based on a single graphene monolayer are often realized on a solid support such as silicon oxide, glassy carbon or a metal film. Here, we show that, with graphene on insulating substrates, the kinetics of the electron transfer at graphene with various redox active molecules is dictated by solution pH for electrode reactions that are not proton dependent. We attribute the origin of this unusual phenomenon mainly to electrostatic effects between dissolved/dissociated redox species and the interfacial charge due to trace amounts of ionizable groups at the supported graphene-liquid interface. Cationic redox species show higher electron transfer rates at basic pH, while anionic species undergo faster electron transfer at acidic pH. Although this behavior is observed on graphene on three different insulating substrates, the strength of this effect appears to differ depending on the surface charge density of the underlying substrate. This finding has important implications for the design of electrochemical sensors and electrocatalysts based on graphene monolayers.
RESUMO
Graphene is considered a model material for surfaces because it is stable despite being composed of a single layer of carbon atoms. Although the thermal and electronic properties of graphene are well reported, the behavior of graphene sheets with the addition of charges to the structure is not well understood. Combining infrared spectroscopy, electrochemical analysis, and computational simulations, we report the effect of an electrochemically induced covalent anchoring of 4-carboxyphenyl (4-CP) units on the optical and electronic properties of graphene. Charges in graphene become concentrated at specific sites of the sheet when electrochemically perturbed and the functionalization occurs inhomogeneously along the graphene sheet. We observed that, when graphene is covalently functionalized, the resistance to heterogeneous electron transfer is increased by a factor of 1.4. Furthermore, scattering-type scanning near-field optical microscopy and atomic force microscopy show that the covalent functionalization affects drastically the optical and physical properties of the graphene/SiO2 system, especially the plasmon-phonon coupling after the functionalization. In addition, from these we infer that a comparatively higher degree of functionalization occurs near the electrode edges. These results are supported by computational simulations, which show that the covalent anchoring of 4-CP units weakens electron transfer because the charges are retained on the sp3-hybridized carbon atoms generated upon functionalization, suggesting that graphene properties are deeply influenced by the way the molecules are immobilized on its structure.
RESUMO
Recently, many strategies are being explored for efficiently wiring glucose dehydrogenase (GDh) enzymes capable of glucose (fuel) oxidation. For instance, the use of GDh NAD(+)-dependent for glucose oxidation is of great interest in biofuel cell technology because the enzyme are unaffected by the presence of molecular oxygen commonly present in electrolyte. Here we present the fabrication of flexible carbon fibers modified with nitrated carbon nanoblisters and their application as high-performance GDh bioanodes. These bioelectrodes could electro-oxidize glucose at -360 mV (vs. Ag/AgClsat) in the presence of a molecular oxygen saturated electrolyte with current densities higher than 1.0 mAcm(-2) at 0.0 V. It is corroborated by open circuit potential, where a potential stabilization occurs at -150 mV in a long term stability current-transient experiment. This value is in agreement with the quasi-steady current obtained at very low scan rate (0.1 mVs(-1)), where the onset potential for glucose oxidation is -180 mV. X-ray photoelectron spectroscopy and scanning electron microscopy revealed that the nitrated blisters and edge-like carbon structures, enabling highly efficient enzyme immobilization and low overpotential for electron transfer, allowing for glucose oxidation with potential values close to the thermodynamic cofactor.
Assuntos
Fontes de Energia Bioelétrica , Carbono/química , Glucose 1-Desidrogenase/química , Glucose/química , Nanopartículas/química , Nitratos/química , Eletrodos , Transferência de Energia , Enzimas Imobilizadas/química , Desenho de Equipamento , Análise de Falha de EquipamentoRESUMO
Clinical diagnosis has always been dependent on the efficient immobilization of biomolecules in solid matrices with preserved activity, but significant developments have taken place in recent years with the increasing control of molecular architecture in organized films. Of particular importance is the synergy achieved with distinct materials such as nanoparticles, antibodies, enzymes, and other nanostructures, forming structures organized on the nanoscale. In this review, emphasis will be placed on nanomaterials for biosensing based on molecular recognition, where the recognition element may be an enzyme, DNA, RNA, catalytic antibody, aptamer, and labeled biomolecule. All of these elements may be assembled in nanostructured films, whose layer-by-layer nature is essential for combining different properties in the same device. Sensing can be done with a number of optical, electrical, and electrochemical methods, which may also rely on nanostructures for enhanced performance, as is the case of reporting nanoparticles in bioelectronics devices. The successful design of such devices requires investigation of interface properties of functionalized surfaces, for which a variety of experimental and theoretical methods have been used. Because diagnosis involves the acquisition of large amounts of data, statistical and computational methods are now in widespread use, and one may envisage an integrated expert system where information from different sources may be mined to generate the diagnostics.
Assuntos
Técnicas Biossensoriais/instrumentação , Nanoestruturas , Nanotecnologia/instrumentação , Humanos , Próteses e Implantes , Estatística como AssuntoRESUMO
An intravenous implantable glucose/dioxygen hybrid enzyme-Pt micro-biofuel cell (BFC) was investigated. In this miniaturized BFC, a flexible carbon fiber (FCF) microelectrode modified with neutral red redox mediator and glucose oxidase was used as the bioanode, and an FCF modified with platinum nanoparticles stabilized on PAMAM-G4 dendrimer was used as the cathode. In vitro experiments conducted using the BFC in a phosphate buffer solution (50 mmol L(-1), pH = 7.2) and glucose (47 mmol L(-1)) showed high electrocatalytic performance with an open circuit voltage (OCV) of 400 mV, a maximum current density of 2700 µA cm(-2) at 0.0 V and a maximum output power of 200 µW cm(-2) at 250 mV. Under physiological conditions, glucose from rat blood is used as a fuel in anodic reactions and dissolved molecular oxygen is used as the oxidizing agent on the cathode. For in vivo experiments, the BFC was inserted into the jugular vein of a living rat (Rattus novergicus) using a catheter (internal diameter 0.5 mm). The power density of the implantable BFC was evaluated over a period of 24 h, and an OCV of 125 mV with a maximum power density of 95 µW cm(-2) was obtained at 80 mV.
Assuntos
Fontes de Energia Bioelétrica , Glucose/química , Oxigênio/química , Animais , Carbono , Fibra de Carbono , Dendrímeros/química , Eletrodos , Desenho de Equipamento , Glucose Oxidase/metabolismo , Masculino , Nanopartículas/química , Nylons/química , Oxirredução , Ratos , Ratos WistarRESUMO
This paper provides an overview of different nanostructured architectures utilised in electrochemical devices and their application in biosensing and bioelectronics. Emphasis is placed on the fabrication of nanostructured films based on a layer-by-layer (LBL) films approach. We discuss the theory and the mechanism of charge transfer in polyelectrolyte multilayer films (PEM), as well as between biomolecules and redox centres, for the development of more sensitive and selective biosensors. Further, this paper presents an overview of topics involving the interaction between nanostructured materials, including metallic nanoparticles and carbon materials, and their effects on the preservation of the activity of biological molecules immobilised on electrode surfaces. This paper also presents examples of biological molecules utilised in film fabrication, such as DNA, several kinds of proteins, and oligonucleotides, and of the role of molecular interaction in biosensing performance. Towards the utilisation of LBL films, examples of several architectures and different electrochemical approaches demonstrate the potential of nanostructured LBL films for several applications that include the diagnosis and monitoring of diseases. Our main aim in this review is to survey what can assist researchers by presenting various approaches currently used in the field of bioelectrochemistry utilising supramolecular architectures based on an LBL approach for application in electrochemical biosensing.
Assuntos
Técnicas Biossensoriais/instrumentação , Eletrodos , Eletrônica/instrumentação , Galvanoplastia/métodos , Nanopartículas/química , Nanotecnologia/instrumentação , Desenho de Equipamento , Nanopartículas/ultraestruturaRESUMO
We show a simple strategy to obtain an efficient enzymatic bioelectrochemical device, in which urease was immobilized on electroactive nanostructured membranes (ENMs) made with polyaniline and silver nanoparticles (AgNP) stabilized in polyvinyl alcohol (PAni/PVA-AgNP). Fabrication of the modified electrodes comprised the chemical deposition of polyaniline followed by drop-coating of PVA-AgNP and urease, resulting in a final ITO/PAni/PVA-AgNP/urease electrode configuration. For comparison, the electrochemical performance of ITO/PAni/urease electrodes (without Ag nanoparticles) was also studied. The performance of the modified electrodes toward urea hydrolysis was investigated via amperometric measurements, revealing a fast increase in cathodic current with a well-defined peak upon addition of urea to the electrolytic solution. The cathodic currents for the ITO/PAni/PVA-AgNP/urease electrodes were significantly higher than for the ITO/PAni/urease electrodes. The friendly environment provided by the ITO/PAni/PVA-AgNP electrode to the immobilized enzyme promoted efficient catalytic conversion of urea into ammonium and bicarbonate ions. Using the Michaelis-Menten kinetics equation, a K(M)(app) of 2.7 mmol L(-1) was obtained, indicating that the electrode architecture employed may be advantageous for fabrication of enzymatic devices with improved biocatalytic properties.