A high-performance hydrogen sensor based on a reverse-biased MoS2/GaN heterojunction.

We report a MoS2/GaN heterojunction-based gas sensor by depositing MoS2 over a GaN substrate via a highly controllable and scalable sputtering technique coupled with a post sulfurization process in a sulfur-rich environment. The microscopic and spectroscopic measurements expose the presence of highly crystalline and homogenous few atomic layer MoS2 on top of molecular beam epitaxially grown GaN film. Upon hydrogen exposure, the molecular adsorption tuned the barrier height at the MoS2/GaN interface under the reverse biased condition, thus resulting in high sensitivity. Our results reveal that temperature strongly affects the sensitivity of the device and it increases from 21% to 157% for 1% hydrogen with an increase in temperature (25-150 °C). For a deeper understanding of carrier dynamics at the heterointerface, we visualized the band alignment across the MoS2/GaN heterojunction having valence band and conduction band offset values of 1.75 and 0.28 eV. The sensing mechanism was demonstrated based on an energy band diagram at the MoS2/GaN interface in the presence and absence of hydrogen exposure. The proposed methodology can be readily applied to other combinations of heterostructures for sensing different gas analytes.

Fabrication of GaN nano-towers based self-powered UV photodetector.

The fabrication of unique taper-ended GaN-Nanotowers structure based highly efficient ultraviolet photodetector is demonstrated. Hexagonally stacked, single crystalline GaN nanocolumnar structure (nanotowers) grown on AlN buffer layer exhibits higher photocurrent generation due to high quality nanotowers morphology and increased surface/volume ratio which significantly enhances its responsivity upon ultraviolet exposure leading to outstanding performance from the developed detection device. The fabricated detector display low dark current (~ 12 nA), high ILight/IDark ratio (> 104), fast time-correlated transient response (~ 433 µs) upon ultraviolet (325 nm) illumination. A high photoresponsivity of 2.47 A/W is achieved in self-powered mode of operation. The reason behind such high performance could be attributed to built-in electric field developed from a difference in Schottky barrier heights will be discussed in detail. While in photoconductive mode, the responsivity is observed to be 35.4 A/W @ - 3 V along with very high external quantum efficiency (~ 104%), lower noise equivalent power (~ 10-13 WHz-1/2) and excellent UV-Vis selectivity. Nanotower structure with lower strain and dislocations as well as reduced trap states cumulatively contributed to augmented performance from the device. The utilization of these GaN-Nanotower structures can potentially be useful towards the fabrication of energy-efficient ultraviolet photodetectors.

Liquid-Metal Synthesized Ultrathin SnS Layers for High-Performance Broadband Photodetectors.

Atomically thin materials face an ongoing challenge of scalability, hampering practical deployment despite their fascinating properties. Tin monosulfide (SnS), a low-cost, naturally abundant layered material with a tunable bandgap, displays properties of superior carrier mobility and large absorption coefficient at atomic thicknesses, making it attractive for electronics and optoelectronics. However, the lack of successful synthesis techniques to prepare large-area and stoichiometric atomically thin SnS layers (mainly due to the strong interlayer interactions) has prevented exploration of these properties for versatile applications. Here, SnS layers are printed with thicknesses varying from a single unit cell (0.8 nm) to multiple stacked unit cells (≈1.8 nm) synthesized from metallic liquid tin, with lateral dimensions on the millimeter scale. It is reveal that these large-area SnS layers exhibit a broadband spectral response ranging from deep-ultraviolet (UV) to near-infrared (NIR) wavelengths (i.e., 280-850 nm) with fast photodetection capabilities. For single-unit-cell-thick layered SnS, the photodetectors show upto three orders of magnitude higher responsivity (927 A W-1 ) than commercial photodetectors at a room-temperature operating wavelength of 660 nm. This study opens a new pathway to synthesize reproduceable nanosheets of large lateral sizes for broadband, high-performance photodetectors. It also provides important technological implications for scalable applications in integrated optoelectronic circuits, sensing, and biomedical imaging.