Incidence and Mortality Rates of Thoracic Aortic Dissection in Korea - Inferred from the Nationwide Health Insurance Claims.

BACKGROUND: Aortic dissection (AD) is one of the most catastrophic diseases and is associated with high morbidity and mortality. The aim of this study is to investigate the hospital incidence and mortality rates of thoracic AD in Korea using a nationwide database. METHODS: We conducted a nationwide population-based study using the health claims data of the National Health Insurance Service in Korea. From 2005 to 2016, adult patients newly diagnosed with AD were included. All patients were divided into the following four subgroups by treatment: type A surgical repair (TASR), type B surgical repair (TBSR), thoracic endovascular aortic repair (TEVAR), and medical management (MM). The incidence rate, mortality rate, and risk factors of in-hospital mortality were evaluated. RESULTS: In total, 18,565 patients were newly diagnosed with AD (TASR, n = 4,319 [23.3%]; TBSR, n = 186 [1.0%]; TEVAR, n = 697 [3.8%]; MM, n = 13,363 [72.0%]). The overall AD incidence rate was 3.76 per 100,000 person-years and exhibited a gradual increase during the study period (3.29 to 4.82, P < 0.001). The overall in-hospital mortality rate was 10.84% and remained consistent (P = 0.57). However, the in-hospital mortality rate decreased in the TASR subgroup (18.23 to 11.27%, P = 0.046). An older age, the female sex, hypertension, and chronic kidney disease were independent risk factors for in-hospital mortality. CONCLUSION: The incidence of thoracic AD has gradually increased in Korea. The in-hospital mortality in the TASR subgroup decreased over the decade, although the overall mortality of AD patients did not change.

Predictive Factors of Thoracic Lymph Node Metastasis Accompanying Pulmonary Metastasis from Colorectal Cancer.

BACKGROUND: The aim of this study was to identify the factors predicting thoracic lymph node (LN) metastases for pulmonary resection from colorectal cancer (CRC). METHODS: The records of 160 patients who underwent pulmonary metastasectomy for CRC were retrospectively reviewed. Clinicopathologic factors were analyzed with chi-square test or t-test and logistic regression to identify predictable factors for LN metastases. RESULTS: Sixty patients (37.5%) underwent LN dissection during pulmonary metastasectomy, and LN metastases were found in five patients. Twenty-three patients had LN recurrence among the 100 patients (62.5%) without LN dissection during the follow-up period. Twenty-eight patients out of 160 (17.5%) had LN metastases. By multivariate analysis, the number of pulmonary metastasis and metastasis from colon cancers were independent factors predicting LN metastases. CONCLUSION: The number of pulmonary metastasis and metastasis from colon cancers were independent factors predicting LN metastases. LN sampling should be performed especially in cases with strong predictive factors to improve staging and help guide further treatment.

Predicting postoperative lung function using ventilation SPECT/CT in patients with lung cancer.

Background: Single-photon emission computed tomography/computed tomography (SPECT/CT) has the advantage of assessing regional lung function. We aimed to investigate the potential of ventilation (SPECT/CT) for predicting postoperative lung function in patients with lung cancer. Methods: This retrospective study included consecutive patients with lung cancer who underwent lobectomy, preoperative ventilation, and perfusion SPECT/CT between January 2020 and December 2021. The percentage of predicted postoperative forced expiratory volume in 1 s (ppoFEV1%) and the percentage of predicted postoperative diffusion capacity of the lung for carbon monoxide (ppoDLCO%) were calculated from the % counts of each scan based on anatomical segments for lobar function. Correlation tests were performed between the predicted lung function values and actual ppoFEV1% and ppoDLCO%. Results: Among the 47 patients, 29 men and 18 women aged 67.5±9.6 years were included. Moreover, 46 ventilation and 41 perfusion SPECT/CT scans were obtained. The pulmonary function on ventilation SPECT/CT strongly correlated with perfusion SPECT/CT (correlation coefficient r=0.939 for ppoFEV1%, P<0.001; r=0.938 for ppoDLCO%, P<0.001). Both ppoFEV1% and ppoDLCO% values obtained from the ventilation and perfusion scans strongly correlated with postoperative FEV1% and DLCO% (correlation coefficient, r=0.774 and r=0.768 for ventilation; r=0.795 and r=0.751 for perfusion, each P<0.001). Conclusions: Ventilation SPECT/CT was comparable to perfusion SPECT/CT in predicting postoperative lung function.

The primary extra-gastrointestinal stromal tumor of pleura: a case report and a literature review.

The gastrointestinal stromal tumor is the most common mesenchymal neoplasm of the gastrointestinal tract. The gastrointestinal stromal tumor universally expresses KIT and DOG-1 and frequently harbors oncogenic mutations in the KIT gene. While the gastrointestinal stromal tumor usually arises in the alimentary tract, it is rarely found in the extragastrointestinal area. When it is, it is called an extragastrointestinal stromal tumor. Although the pathogenesis, prognostic factors and outcomes of gastrointestinal stromal tumors are well known, those of extragastrointestinal stromal tumors have not been fully studied. We report, herein, a unique primary extragastrointestinal stromal tumor from the pleura in a 73-year-old woman who presented with pleural mass. The extragastrointestinal stromal tumor was surgically resected and confirmed by means of an immunohistochemical study and a molecular analysis.

Optimization of Atmospheric Pressure Plasma Jet with Single-Pin Electrode Configuration and Its Application in Polyaniline Thin Film Growth.

This study systematically investigated an atmospheric pressure plasma reactor with a centered single pin electrode inside a dielectric tube for depositing the polyaniline (PANI) thin film based on the experimental case studies relative to variations in pin electrode configurations (cases I, II, and III), bluff-body heights, and argon (Ar) gas flow rates. In these cases, the intensified charge-coupled device and optical emission spectroscopy were analyzed to investigate the factors affecting intensive glow-like plasma generation for deposition with a large area. Compared to case I, the intense glow-like plasma of the cases II and III generated abundant reactive nitrogen species (RNSs) and excited argon radical species for fragmentation and recombination of PANI. In case III, the film thickness and deposition rate of the PANI thin film were about 450 nm and 7.5 nm/min, respectively. This increase may imply that the increase in the excited radical species contributes to the fragmentation and recombination due to the increase in RNSs and excited argon radicals during the atmospheric pressure (AP) plasma polymerization to obtain the PANI thin film. This intense glow-like plasma generated broadly by the AP plasma reactor can uniformly deposit the PANI thin film, which is confirmed by field emission-scanning electron microscopy and Fourier transform infrared spectroscopy.

Impact of Individual Income Level on Late Mortality After Coronary Artery Bypass Grafting.

BACKGROUND: Coronary artery bypass grafting (CABG) is an important and viable option for patients with symptomatic or life-threatening ischemic heart disease. Few papers have explored whether socioeconomic status is a significantly important determinant in late outcomes of CABG, and individual-level socioeconomic data were particularly scarce. This study was conducted to explore the impact of individual income level on clinical outcomes after CABG. METHODS: This nationwide longitudinal population-based study was conducted in South Korea using the National Health Insurance Service database. Overall, 29 810 adult patients who underwent first-time isolated CABG from 2005 to 2015 were included. The individual income level was stratified into 4 quartiles (Q1-Q4). The primary outcome was overall mortality. RESULTS: After adjustment for preoperative comorbidities, no significant difference in the in-hospital mortality rate was observed between the lowest (income Q1 group) and highest (income Q4 group) quartiles. The risk of overall mortality increased significantly with a reduction in income level, and having an income in the lowest quartile was a significant predictor of worse late mortality compared with the highest quartile (hazard ratio, 1.23; 95% CI, 1.17-1.30). Moreover, the overall incidence of stroke and myocardial infarction was significantly higher in the income Q1 group than in the income Q4 group. The median follow-up duration was 7.0 years (interquartile range, 4.1-10.2 years). CONCLUSIONS: Patients with a lower individual income level had an increased risk of the poorer long-term outcomes after CABG compared with the highest individual income level quartile.

Development of an Atmospheric Pressure Plasma Jet Device Using Four-Bore Tubing and Its Applications of In-Liquid Material Decomposition and Solution Plasma Polymerization.

In this study, we describe an atmospheric pressure plasma jet (APPJ) device made of four-bore tubing operable in inhospitable humid environments and introduce two potential applications of liquid material processing: decomposition of aqueous phosphorus compounds and solution-plasma polymerization. A four-bore tube was used as the plasma transfer conduit and two diagonal bores contained metal wires. In the proposed APPJ device, the metal wires serving as electrodes are completely enclosed inside the holes of the multi-bore glass tube. This feature allows the APPJ device to operate both safely and reliably in humid environments or even underwater. Thus, we demonstrate that the proposed electrode-embedded APPJ device can effectively decompose aqueous phosphorus compounds into their phosphate form by directly processing the solution sample. As another application of the proposed APPJ device, we also present the successful synthesis of polypyrrole nanoparticles by solution plasma polymerization in liquid pyrrole.

Video-assisted thoracic surgery sleeve resection and bronchoplasty using 3D imaging system: its safety and efficacy.

BACKGROUND: Video-assisted thoracic surgery sleeve resection with bronchial anastomosis or bronchoplasty is a technically demanding procedure. Three-dimensional endoscopic surgery has been reported to be helpful in decreasing operation time and improving spatial perception with less surgical errors, but there have been rare reports about relatively difficult thoracoscopic procedures utilizing 3D thoracoscope. We performed this study to evaluate early clinical outcomes of thoracoscopic sleeve resection and bronchoplasty utilizing 3D thoracoscope. METHODS: Data from a total of 36 patients who underwent thoracoscopic sleeve lobectomy or bronchoplasty at our institution from December 2015 to October 2017 were retrospectively reviewed. Three-port approach with one utility incision was used with a 10 mm, 30° three-dimensional thoracoscope. Twenty-three patients (81%) were male, and mean age was 65.9 ± 9.4 years. Fourteen patients (38.9%) underwent sleeve resection with bronchial anastomosis, 22 (61.1%) underwent wedge or simple bronchoplasty, and one patient received concomitant PA procedure. Bronchial anastomosis sites were not covered with viable tissue flaps. RESULTS: There was no (0%) suture needle injury from spatial misperception during bronchoplasty or sleeve anastomosis. There was no (0%) operative mortality. The pathologic report revealed squamous cell carcinoma (63.9%), adenocarcinoma (19.4%), carcinoid (6.9%), adenosquamous carcinoma (3.4%), and sarcomatoid carcinoma (2.8%). One (2.8%) late mortality was due to systemic recurrence of sarcomatoid carcinoma. There was no (0.0%) anastomotic failure. The mean number of dissected lymph nodes were 27.4 ± 13.2, and mean operation time was 216.8 ± 60.0 min. Median postoperative 24-h drain amount was 315 mL. Median chest tube days and hospital days were 4 and 6, respectively. Two patients (5.6%) had complications greater than Clavien-Dindo grade II-one case of ARDS, and the other case of a delayed bronchopleural fistula. CONCLUSIONS: Thoracoscopic sleeve resection and bronchoplasty utilizing HD 3D thoracoscope is a safe and effective procedure with excellent early clinical outcomes. Further investigation for long-term outcomes will be needed.

A Review of Plasma Synthesis Methods for Polymer Films and Nanoparticles under Atmospheric Pressure Conditions.

In this paper, we present an overview of recent approaches in the gas/aerosol-through-plasma (GATP) and liquid plasma methods for synthesizing polymer films and nanoparticles (NPs) using an atmospheric-pressure plasma (APP) technique. We hope to aid students and researchers starting out in the polymerization field by compiling the most commonly utilized simple plasma synthesis methods, so that they can readily select a method that best suits their needs. Although APP methods are widely employed for polymer synthesis, and there are many related papers for specific applications, reviews that provide comprehensive coverage of the variations of APP methods for polymer synthesis are rarely reported. We introduce and compile over 50 recent papers on various APP polymerization methods that allow us to discuss the existing challenges and future direction of GATP and solution plasma methods under ambient air conditions for large-area and mass nanoparticle production.

Improvement of the Uniformity and Electrical Properties of Polyaniline Nanocomposite Film by Addition of Auxiliary Gases during Atmospheric Pressure Plasma Polymerization.

The morphological and chemical properties of polyaniline (PANI) nanocomposite films after adding small amounts of auxiliary gases such as argon, nitrogen, and oxygen during atmospheric pressure (AP) plasma polymerization are investigated in detail. A separate gas-supply line for applying an auxiliary gas is added to the AP plasma polymerization system to avoid plasma instability due to the addition of auxiliary gas during polymerization. A small amount of neutral gas species in the plasma medium can reduce the reactivity of monomers hyperactivated by high plasma energy and prevent excessive crosslinking, thereby obtaining a uniform and regular PANI nanocomposite film. The addition of small amounts of argon or nitrogen during polymerization significantly improves the uniformity and regularity of PANI nanocomposite films, whereas the addition of oxygen weakens them. In particular, the PANI film synthesized by adding a small amount of nitrogen has the best initial electrical resistance and resistance changing behavior with time after the ex situ iodine (I2)-doping process compared with other auxiliary gases. In addition, it is experimentally demonstrated that the electrical conductivity of the ex situ I2-doped PANI film can be preserved for a long time by isolating it from the atmosphere.

Improvement of Nanostructured Polythiophene Film Uniformity Using a Cruciform Electrode and Substrate Rotation in Atmospheric Pressure Plasma Polymerization.

In atmospheric pressure (AP) plasma polymerization, increasing the effective volume of the plasma medium by expanding the plasma-generating region within the plasma reactor is considered a simple method to create regular and uniform polymer films. Here, we propose a newly designed AP plasma reactor with a cruciform wire electrode that can expand the discharge volume. Based on the plasma vessel configuration, which consists of a wide tube and a substrate stand, two tungsten wires crossed at 90 degrees are used as a common powered electrode in consideration of two-dimensional spatial expansion. In the wire electrode, which is partially covered by a glass capillary, discharge occurs at the boundary where the capillary terminates, so that the discharge region is divided into fourths along the cruciform electrode and the discharge volume can successfully expand. It is confirmed that although a discharge imbalance in the four regions of the AP plasma reactor can adversely affect the uniformity of the polymerized, nanostructured polymer film, rotating the substrate using a turntable can significantly improve the film uniformity. With this AP plasma reactor, nanostructured polythiophene (PTh) films are synthesized and the morphology and chemical properties of the PTh nanostructure, as well as the PTh-film uniformity and electrical properties, are investigated in detail.

Improvement of the thermal stability of dendritic silver-coated copper microparticles by surface modification based on molecular self-assembly.

In the study reported herein, silver-coated copper (Ag/Cu) powder was modified with alkanethiols featuring alkyl chains of different lengths, namely butyl, octyl, and dodecyl, to improve its thermal stability. The modification of the Ag/Cu powders with adsorbed alkanethiols was confirmed by scanning electron microscopy with energy dispersive spectroscopy, X-ray photoelectron spectroscopy, and thermogravimetric analysis. Each powder was combined with an epoxy resin to prepare an electrically conductive film. The results confirmed that the thermal stability of the films containing alkanethiol-modified Ag/Cu powders is superior to that of the film containing untreated Ag/Cu powder. The longer the alkyl group in the alkanethiol-modified Ag/Cu powder, the higher the initial resistance of the corresponding electrically conductive film and the lower the increase in resistance induced by heat treatment.

In-Situ Iodine Doping Characteristics of Conductive Polyaniline Film Polymerized by Low-Voltage-Driven Atmospheric Pressure Plasma.

In-situ iodine (I2)-doped atmospheric pressure (AP) plasma polymerization is proposed, based on a newly designed AP plasma reactor with a single wire electrode that enables low-voltage-driven plasma polymerization. The proposed AP plasma reactor can proceed plasma polymerization at low voltage levels, thereby enabling an effective in-situ I2 doping process by maintaining a stable glow discharge state even if the applied voltage increases due to the use of a discharge gas containing a large amount of monomer vapors and doping materials. The results of field-emission scanning electron microscopy (FE-SEM) and Fourier transformation infrared spectroscopy (FT-IR) show that the polyaniline (PANI) films are successfully deposited on the silicon (Si) substrates, and that the crosslinking pattern of the synthesized nanoparticles is predominantly vertically aligned. In addition, the in-situ I2-doped PANI film fabricated by the proposed AP plasma reactor exhibits excellent electrical resistance without electrical aging behavior. The developed AP plasma reactor proposed in this study is more advantageous for the polymerization and in-situ I2 doping of conductive polymer films than the existing AP plasma reactor with a dielectric barrier.

Transparent Polyaniline Thin Film Synthesized Using a Low-Voltage-Driven Atmospheric Pressure Plasma Reactor.

The use of low-voltage-driven plasma in atmospheric pressure (AP) plasma polymerization is considered as a simple approach to reducing the reactivity of the monomer fragments in order to prevent excessive cross-linking, which would have a negative effect on the structural properties of the polymerized thin films. In this study, AP-plasma polymerization can be processed at low voltage by an AP-plasma reactor with a wire electrode configuration. A bare tungsten wire is used as a powered electrode to initiate discharge in the plasma area (defined as the area between the wide glass tube and the substrate stand), thus allowing plasma polymerization to proceed at a lower voltage compared to other AP-plasma reactors with dielectric barriers. Thus, transparent polyaniline (PANI) films are successfully synthesized. The surface morphology, roughness, and film thickness of the PANI films are characterized by field emission scanning electron microscopy and atomic force microscopy. Thus, the surface of the polymerized film is shown to be homogenous, smooth, and flat, with a low surface roughness of 1 nm. In addition, the structure and chemical properties of the PANI films are investigated by Fourier transform infrared spectroscopy, thus revealing an improvement in the degree of polymerization, even though the process was performed at low voltage.

Ultrafast Room Temperature Synthesis of Porous Polythiophene via Atmospheric Pressure Plasma Polymerization Technique and Its Application to NO2 Gas Sensors.

New nanostructured conducting porous polythiophene (PTh) films are directly deposited on substrates at room temperature (RT) by novel atmospheric pressure plasma jets (APPJs) polymerization technique. The proposed plasma polymerization synthesis technique can grow the PTh films with a very fast deposition rate of about 7.0 µm·min-1 by improving the sufficient nucleation and fragment of the thiophene monomer. This study also compares pure and iodine (I2)-doped PTh films to demonstrate the effects of I2 doping. To check the feasibility as a sensing material, NO2-sensing properties of the I2-doped PTh films-based gas sensors are also investigated. As a result, the proposed APPJs device can produce the high density, porous and ultra-fast polymer films, and polymers-based gas sensors have high sensitivity to NO2 at RT. Our approach enabled a series of processes from synthesis of sensing materials to fabrication of gas sensors to be carried out simultaneously.

Potential Application of Pin-to-Liquid Dielectric Barrier Discharge Structure in Decomposing Aqueous Phosphorus Compounds for Monitoring Water Quality.

Here, we proposed a pin-to-liquid dielectric barrier discharge (DBD) structure that used a water-containing vessel body as a dielectric barrier for the stable and effective treatment of aqueous solutions in an open atmosphere. To obtain an intense pin-to-liquid alternating current discharge using a dielectric barrier, discharge characteristics, including the area and shape of a ground-plate-type electrode, were investigated after filling the vessel with equivalent amounts of water. Consequently, as the area of the ground electrode increased, the discharge current became stronger, and its timing became faster. Moreover, we proposed that the pin-to-liquid DBD reactor could be used to decompose phosphorus compounds in water in the form of phosphate as a promising pretreatment method for monitoring total phosphorus in water. The decomposition of phosphorus compounds using the pin-to-liquid DBD reactor demonstrated excellent performance-comparable to the thermochemical pretreatment method-which could be a standard pretreatment method for decomposing phosphorus compounds in water.

Respiratory symptoms and health-related quality of life in post-tuberculosis subjects with physician-diagnosed bronchiectasis: a cross-sectional study.

BACKGROUND: Prevalence, respiratory symptoms, and quality of life (QoL) in post-tuberculosis (TB) subjects with bronchiectasis are not well elucidated. METHODS: Subjects who participated in the Korea National Health and Nutritional Examination Survey 2007-2009 were enrolled in this cross-sectional study. We evaluated the prevalence of physician-diagnosed bronchiectasis among post-TB subjects. We compared respiratory symptoms, physical activity limitations, and QoL between post-TB subjects with and without bronchiectasis. RESULTS: The prevalence of bronchiectasis was 3.3% among 963 post-TB subjects. Post-TB subjects with bronchiectasis showed a higher rate of asthma (29.6% vs. 4.9%, P<0.001) than those without bronchiectasis. Post-TB subjects with bronchiectasis showed more cough (23.9% vs. 6.7%, P=0.033) and physical activity limitations due to respiratory diseases (35.0% vs. 8.9%, P=0.033) than those without bronchiectasis. Furthermore, compared with post-TB subjects without bronchiectasis, those with bronchiectasis had lower QoL measured by the EuroQoL five-dimension (EQ-5D) index (0.84 vs. 0.93, P=0.048). Linear regression analysis found that the EQ-5D index in post-TB subjects with bronchiectasis was significantly lower than in those without bronchiectasis (difference estimate =-0.089, P=0.030), especially in the anxiety/depression component. CONCLUSIONS: Post-TB subjects with bronchiectasis had more cough and physical activity limitations and lower health-related QoL than those without bronchiectasis.

Bilateral pneumothorax in a patient with anaplastic thyroid carcinoma and lung metastasis during lenvatinib therapy: a case report.

The prognosis of anaplastic thyroid carcinoma (ATC) is very poor. In most patients, ATC presents with cervical lymph node metastasis, and more than 40% of patients have distant metastasis at the time of diagnosis. Lenvatinib, a multi-targeted tyrosine kinase inhibitor, is a novel drug that has antitumor effects on radioactive iodine-refractory papillary cancer and anaplastic cancer. The development of bilateral pneumothorax during targeted therapy is very rare in patients with thyroid cancer. We recently encountered a case of bilateral pneumothorax in a patient with ATC and lung metastasis during lenvatinib therapy. The patient underwent video-assisted thoracoscopic surgery (VATS) in both the lungs because the pneumothorax continued to aggravate even after the insertion of chest tubes. Clinicians need to be aware that the development of pneumothorax is a possibility during lenvatinib therapy for ATC and lung metastasis. The case is reported herein, along with a review of relevant literature.

Fate of contralateral asymptomatic bullae in patients with primary spontaneous pneumothorax.

OBJECTIVES: This retrospective cohort study aimed to analyse the impact of asymptomatic blebs/bullae on the occurrence of primary spontaneous pneumothorax (PSP) by monitoring the natural course of contralateral blebs/bullae in patients with ipsilateral pneumothorax. METHODS: From January 2003 to December 2017, 1055 patients [age 19.6 ± 3.98 years (mean ± standard deviation), 953 men] experiencing the first episode of unilateral PSP were enrolled in this study, excluding patients aged 30 years or more. The presence, number and maximal size of the blebs/bullae were investigated in contralateral asymptomatic lungs based on high-resolution computed tomography. RESULTS: Multiple and single blebs/bullae were noted in contralateral lungs in 425 (40.3%) and 88 (8.3%) patients, respectively. The median follow-up period was 44.0 (interquartile range 71.5) months. The 1-, 3- and 5-year cumulative occurrence rates of PSP in contralateral lungs were 7.9%, 13.7% and 16.7%, respectively. On multivariable analysis, younger age [hazard ratio (HR) 1.19, 95% confidence interval (CI) 1.12-1.27; P < 0.001) and multiple bullae (HR 4.42, 95% CI 3.06-6.38; P < 0.001) were independent risk factors for spontaneous pneumothorax in the contralateral lung. The 5-year cumulative occurrence rates of PSP were significantly higher in patients with multiple blebs/bullae than in those with no or a single bleb/bulla (28.2% vs 8.5%, respectively; P < 0.001). CONCLUSIONS: Asymptomatic blebs/bullae often lead to PSP. If the patient is eligible for surgery for pneumothorax, preemptive surgery for contralateral bullae could be considered, especially in patients with multiple blebs/bullae.

Synthesis and Properties of Thiophene and Aniline Copolymer Using Atmospheric Pressure Plasma Jets Copolymerization Technique.

This paper investigates the properties of thiophene and aniline copolymer (TAC) films deposited by using atmospheric pressure plasma jets copolymerization technique relative to various blending ratios of aniline and thiophene monomer for synthesizing the donor-acceptor conjugated copolymers. Field emission scanning electron microscopy (FE-SEM) and atomic force microscopy are utilized to measure the surface morphology, roughness and film thickness of TAC films. Structural and chemical properties of TAC films are investigated by Fourier transforms-infrared spectroscopy (FT-IR), time of flight secondary ion mass spectrometry, and X-ray photoelectron spectroscopy. FE-SEM images show that the film thickness and nanoparticles size of the TAC films increase with an addition thiophene monomer in the aniline monomer. FE-SEM, FT-IR results show that TAC films are successfully synthesized on glass substrates in all cases. The iodine doped TAC film on the Si substrate with interdigitated electrodes shows the lowest electrical resistance at blending condition of thiophene of 25%.