Aqueous Li-ion battery enabled by halogen conversion-intercalation chemistry in graphite.

The use of 'water-in-salt' electrolytes has considerably expanded the electrochemical window of aqueous lithium-ion batteries to 3 to 4 volts, making it possible to couple high-voltage cathodes with low-potential graphite anodes1-4. However, the limited lithium intercalation capacities (less than 200 milliampere-hours per gram) of typical transition-metal-oxide cathodes5,6 preclude higher energy densities. Partial7,8 or exclusive9 anionic redox reactions may achieve higher capacity, but at the expense of reversibility. Here we report a halogen conversion-intercalation chemistry in graphite that produces composite electrodes with a capacity of 243 milliampere-hours per gram (for the total weight of the electrode) at an average potential of 4.2 volts versus Li/Li+. Experimental characterization and modelling attribute this high specific capacity to a densely packed stage-I graphite intercalation compound, C3.5[Br0.5Cl0.5], which can form reversibly in water-in-bisalt electrolyte. By coupling this cathode with a passivated graphite anode, we create a 4-volt-class aqueous Li-ion full cell with an energy density of 460 watt-hours per kilogram of total composite electrode and about 100 per cent Coulombic efficiency. This anion conversion-intercalation mechanism combines the high energy densities of the conversion reactions, the excellent reversibility of the intercalation mechanism and the improved safety of aqueous batteries.

Author Correction: Aqueous Li-ion battery enabled by halogen conversion-intercalation chemistry in graphite.

In Fig. 3e of this Letter, the labels "Br-Cl1" and "Br-Cl2" should read "Br-Br1" and "Br-Br2", respectively. In the Methods section 'Preparation of electrodes', the phrase "anhydrous LiBr/LiCl was replaced by LiBr·H2O (99.95%; Sigma-Aldrich) and LiCl (99.95%; Sigma-Aldrich)" should read "anhydrous LiBr/LiCl was replaced by LiBr·H2O (99.95%; Sigma-Aldrich) and LiCl·H2O (99.95%; Sigma-Aldrich)". These errors have been corrected online.

Functional analysis of the mating type genes in Verticillium dahliae.

BACKGROUND: Populations of the plant pathogenic fungus Verticillium dahliae display a complex and rich genetic diversity, yet the existence of sexual reproduction in the fungus remains contested. As pivotal genes, MAT genes play a crucial role in regulating cell differentiation, morphological development, and mating of compatible cells. However, the functions of the two mating type genes in V. dahliae, VdMAT1-1-1, and VdMAT1-2-1, remain poorly understood. RESULTS: In this study, we confirmed that the MAT loci in V. dahliae are highly conserved, including both VdMAT1-1-1 and VdMAT1-2-1 which share high collinearity. The conserved core transcription factor encoded by the two MAT loci may facilitate the regulation of pheromone precursor and pheromone receptor genes by directly binding to their promoter regions. Additionally, peptide activity assays demonstrated that the signal peptide of the pheromone VdPpg1 possessed secretory activity, while VdPpg2, lacked a predicted signal peptide. Chemotactic growth assays revealed that V. dahliae senses and grows towards the pheromones FO-a and FO-α of Fusarium oxysporum, as well as towards VdPpg2 of V. dahliae, but not in response to VdPpg1. The findings herein also revealed that VdMAT1-1-1 and VdMAT1-2-1 regulate vegetative growth, carbon source utilization, and resistance to stressors in V. dahliae, while negatively regulating virulence. CONCLUSIONS: These findings underscore the potential roles of VdMAT1-1-1 and VdMAT1-2-1 in sexual reproduction and confirm their involvement in various asexual processes of V. dahliae, offering novel insights into the functions of mating type genes in this species.

INDUCE-2: A Phase I/II, open-label, two-part study of feladilimab in combination with tremelimumab in patients with advanced solid tumors.

Combining immunotherapies with distinct mechanisms of action has the potential to overcome treatment resistance and improve outcomes. The inducible T-cell co-stimulator (ICOS) agonist feladilimab is directed at enhancing T-cell activation and function, thereby promoting an antitumor response. INDUCE-2 (NCT03693612) was a Phase I/II, open-label, two-part study evaluating the anti-ICOS agonist feladilimab in combination with the anti-CTLA-4 antibody tremelimumab in patients with select advanced solid tumors. Objectives of Part 1 were to determine the safety, tolerability, and recommended phase 2 dose (RP2D) of feladilimab in combination with tremelimumab. In Part 2, the antitumor activity of the combination (administered at the RP2D determined in Part 1) was to be assessed in patients with relapsed/refractory head and neck squamous cell carcinoma. Primary endpoints included the rates of dose-limiting toxicities (DLTs), adverse events (AEs), AEs of special interest, and serious AEs. Secondary endpoints included overall response rate, while biomarker assessment was exploratory. A total of 26 patients were enrolled, 18 (69%) of whom had completed the study at end date. One patient, in the highest dose group (24/225 mg feladilimab/tremelimumab), experienced a DLT 18 days after the first dose of study treatment. All patients experienced at least one AE; AEs led to treatment discontinuation in four (15%) patients. Partial response was observed in one patient. Feladilimab in combination with tremelimumab was well-tolerated but showed limited efficacy. Based on the totality of data from Part 1, it was decided not to continue with Part 2.

Microglia-derived exosomes modulate myelin regeneration via miR-615-5p/MYRF axis.

Demyelination and failure of remyelination in the central nervous system (CNS) characterize a number of neurological disorders. Spontaneous remyelination in demyelinating diseases is limited, as oligodendrocyte precursor cells (OPCs), which are often present in demyelinated lesions in abundance, mostly fail to differentiate into oligodendrocytes, the myelinating cells in the CNS. In addition to OPCs, the lesions are assembled numbers of activated resident microglia/infiltrated macrophages; however, the mechanisms and potential role of interactions between the microglia/macrophages and OPCs are poorly understood. Here, we generated a transcriptional profile of exosomes from activated microglia, and found that miR-615-5p was elevated. miR-615-5p bound to 3'UTR of myelin regulator factor (MYRF), a crucial myelination transcription factor expressed in oligodendrocyte lineage cells. Mechanistically, exosomes from activated microglia transferred miR-615-5p to OPCs, which directly bound to MYRF and inhibited OPC maturation. Furthermore, an effect of AAV expressing miR-615-5p sponge in microglia was tested in experimental autoimmune encephalomyelitis (EAE) and cuprizone (CPZ)-induced demyelination model, the classical mouse models of multiple sclerosis. miR-615-5p sponge effectively alleviated disease progression and promoted remyelination. This study identifies miR-615-5p/MYRF as a new target for the therapy of demyelinating diseases.

Quercetin regulates dendritic cell activation by targeting STAT4 in the treatment of experimental autoimmune encephalomyelitis.

Multiple sclerosis (MS) is a class of autoimmune diseases mainly caused by the immune system attacking the myelin sheath of the axons in the nervous system. Although the pathogenesis of MS is complex, studies have shown that dendritic cells (DCs) play a vital role in the pathogenesis of MS. Quercetin (QU) has a unique advantage in clinical application, especially for treating autoimmune diseases. However, the mechanism of QU in the treatment of experimental autoimmune encephalomyelitis (EAE) remains unclear. In this study, we explore the potential role of QU in EAE. Finally, we find that QU has anti-inflammatory activities and neural protective effects in EAE. The experimental results suggest that the cellular basis for QU's function is to inhibit the activation of DCs while modulating the Th17 cell differentiation in the co-culture system. Further, QU may target STAT4 to inhibit its activation in DCs. This work will be of great significance for the future development and utilization of QU.

Therapeutic Potential of Danyankang Capsule in High-Fat Diet-Induced Cholelithiasis and Its Impact on Liver FXR Signaling and Gut Microbiota.

Cholelithiasis, commonly known as gallstones, represents a prevalent hepatobiliary disorder. This study aimed to elucidate the therapeutic role and mechanism of Danyankang capsulein treating cholelithiasis induced by a high-fat diet in C57BL/6 mice. The therapeutical potential of Danyankang was assessed through biochemical analyses, histopathological examinations, protein detection, and 16S rDNA sequencing. A high-fat diet resulted in cholelithiasis manifestation in mice, with discernable abnormal serum biochemical indices and disrupted biliary cholesterol homeostasis. Danyankang treatment notably ameliorated liver inflammation symptoms and rectified serum and liver biochemical abnormalities. Concurrently, it addressed biliary imbalances. Elevated expressions of toll-like receptor 4 (TLR4), nuclear factor-kappaB (NF-κB)/pNF-κB, HMGCR, CYP7A1, and CYP8B1 observed at the inception of cholelithiasis, were notably reduced upon Danyankang administration. Furthermore, 16S rDNA analysis revealed a decline in species number and diversity of the intestinal flora in cholelithiasis-treated mice, while the decline was reversed with Danyankang treatment. Danyankang capsules reduced the abundance of Verrucomicrobiota and increased the abundance of Actinobacteriota and Proteobacteria. In conclusion, the present study demonstrates that Danyankang exerts potent therapeutic efficacy against high-fat diet-induced cholelithiasis. This beneficial outcome is potentially linked to the inhibition of the TLR4/pNF-κB and SHP/CYP7A1/CYP8B1 signaling pathways, as well as the enhancement of intestinal flora species abundance.

Characteristics of drug overdose suicide attempts presenting to the psychiatric emergency department of Beijing Anding Hospital.

BACKGROUND: Overdose-related suicide attempts represent a significant portion of self-harm presentations in the psychiatric emergency department (ED). Identifying specific patient characteristics associated with these attempts holds promise for pinpointing drug classes with elevated risk and paving the way for tailored suicide prevention interventions. This study aims to examine the demographic profiles of ED patients who had experienced overdose-related suicide attempts. METHODS: This retrospective study was conducted at Beijing Anding Hospital, Capital Medical University, from January 2020 to December 2021. Patients with psychiatric drug overdose suicide attempts presenting to the psychiatric ED were included. Sociodemographic characteristics and the specific classes of drugs involved were collected, and analysed descriptively. RESULTS: This study examined 252 overdose patients, excluding 51 patients treated with alcohol or nonpsychiatric drugs, and a total 201 cases were included. The mean age of the patients was 28 ± 16 years (median 23, range 12-78), and 82% (n = 165) of the sample were females. Notably, nearly half (45%) of the patients were aged ≤ 20 years. While the number of cases decreased with increasing age, a significant increase was observed in 2021 compared to 2020. Benzodiazepines (BZDs) were the most frequently implicated substance class (n = 126, 63%), followed by antidepressants (n = 96, 48%), antipsychotics (n = 44, 22%), Z-drugs (n = 43, 21%), and mood stabilizers (n = 36, 18%). For adolescents, antidepressants (n = 52, 71%) overtook BZDs (n = 38, 52%) as the most common drug. The monthly distribution of cases revealed peaks in April and November. Furthermore, 21% (n = 42) of patients ingested more than two psychotropic medications concurrently. Finally, approximately half (n = 92) of the patients required inpatient admission for further treatment. Comparisons between hospitalized and nonhospitalized patients did not reveal any significant differences. CONCLUSIONS: The present study revealed a greater prevalence of suicide overdose attempts among young females receiving prescriptions for antidepressants and/or BZDs. This finding suggests a potential need for enhanced monitoring of suicidal behaviour in this specific population when prescribing psychotropic medications. These findings contribute to the growing body of knowledge regarding drug overdose suicide attempts in psychiatric emergency settings and underscore the importance of further research to develop targeted prevention interventions.

Analysis of related factors influencing postoperative recurrence of adenomyosis treated with HIFU.

OBJECTIVE: To analyze the efficacy of high-intensity focused ultrasound (HIFU) for adenomyosis and postoperative recurrence and its influencing factors. METHODS: Clinical and follow-up data of 308 patients with adenomyosis who were treated with HIFU in Haifu Center, Affiliated Hospital of Chengdu University of Traditional Chinese Medicine from September 2017 to January 2022 were retrospectively analyzed. The recurrence of adenomyosis and the efficacy of HIFU at 6 months after surgery were followed up. To explore factors influencing postoperative prognosis and recurrence, the following variables were analyzed: patients' age, course of disease, gravidity and parity, size of the uterus, duration of HIFU, duration of irradiation, treatment intensity, dysmenorrhea score, time of follow-up, combined treatment of traditional Chinese medicine (TCM), western medicine adjuvant treatment, lesion location and type, and menorrhagia. RESULTS: Among the 308 patients, 238 (77%) were followed up from 6 to 36 months, with an average follow-up time of 15.24 ± 9.97 months. The other 70 (23%) were lost to follow-up. At 6-month after surgery, efficacy rates of dysmenorrhea and menorrhagia management were 86.7% and 89.3%, respectively. Postoperative recurrence rates were 4.8% (1-12 months), 9.0% (12-24 months), and 17.0% (24-36 months) for dysmenorrhea; and 6.3% (1-12 months), 2.4% (12-24 months), and 12.2% (24-36 months) for menorrhagia. Multivariate logistic regression analyses showed that parity (P = 0.043, OR = 1.773, 95% CI 1.018-3.087), uterine size (P = 0.019, OR = 1.004, 95% CI 1.001-1.007), combined treatment of TCM (P = 0.047, OR = 1.846, 95% CI 1.008-3.381), diffuse lesion type (P = 0.013, OR = 0.464, 95% CI 0.254-0.848) and ablation rate (P = 0.015, OR = 0.481, 95%CI 0.267-0.868) were prognostic factors (P < 0.05). Age, course of disease, gravidity, duration of HIFU, duration of irradiation, treatment intensity, preoperative dysmenorrhea score, time of follow-up, western medicine adjuvant therapy, lesion location, and preoperative menstrual volume had no effect on prognosis (P > 0.05). CONCLUSION: HIFU can effectively relieve dysmenorrhea and reduce menstrual volume in patients with adenomyosis. Parity, uterine size, lesion type (diffuse), and ablation rate are risk factors for symptom recurrence after HIFU, while the combination of TCM therapy is a protective factor for relapse. We, therefore, recommend TCM in the adjuvant setting after HIFU according to patient condition.

Multi-omics analysis reveals the collaboration and metabolisms of the anammox consortia driven by soluble/non-soluble Fe(III) as the sole iron element.

Iron is recognized as a physiological requirement for anammox bacteria (AnAOB), with Fe(II) considered to be the most effective form. However, Fe(III), instead of Fe(II) is the common iron form in natural and artificial ecosystems. In this study, the nitrogen removal performance and metabolic mechanisms in anammox consortia with soluble and non-soluble Fe(III) as the sole iron element were investigated. After the 150-day operation, the soluble (FeCl3) and insoluble (Fe2O3) Fe(III)-fed anammox systems reached nitrogen removal rates of 71.84 ± 0.80% and 50.20 ± 0.98%, respectively. AnAOB could survive with soluble (FeCl3) or insoluble (Fe2O3) Fe(III) as the sole iron element, reaching relative abundances of 18.49% and 13.16%, respectively. The results show that the formation of anammox core consortia can enable AnAOB's survival to adverse external conditions of Fe(II) deficiency. Metagenomic and metatranscriptomic analysis reveal that Ca. Kuenenia can only uptake Fe(II) into the cell for metabolisms either independently through the extracellular electron transfer or with the cross-feeding of symbiotic microbes. This study provides insight into the utilization and metabolic mechanisms of Fe(III) in Ca. Kuenenia-dominated consortia, and deepens the understanding of anammox core consortia in the nitrogen, carbon, and iron cycling, further promoting the practical applications of anammox processes.

[Research progress on the neural mechanism of the regulation of social isolation on innate behaviors].

Innate behavior is mainly controlled by genetics, but is also regulated by social experiences such as social isolation. Studies in animal models such as Drosophila and mice have found that social isolation can regulate innate behaviors through the changes at the molecular level, such as hormone, neurotransmitter, neuropeptide level, and at the level of neural circuits. In this review, we summarized the research progress on the regulation of social isolation on various animal innate behaviors, such as sleep, reproduction and aggression by altering the expression of conserved neuropeptides and neurotransmitters, hoping to deepen the understanding of the key and conserved signal pathways that regulate innate behavior by social isolation.

3D-printed coloured tooth model for inlay preparation in pre-clinical dental education.

INTRODUCTION: Accurate inlay preparation is extremely important in pre-clinical training. However, there is a lack of tools to guide students to efficiently practise inlay preparation. Therefore, a 3D-printed coloured tooth model for inlay preparation was designed to guide beginners to practise inlay preparation by themselves according to different colour prompts. This study aimed to evaluate the benefits of using a 3D-printed coloured tooth model in the pre-clinical training on inlay preparation. MATERIALS AND METHODS: Twenty-eight students in their fourth-year undergraduate dental program participated in this study. The participants were randomly assigned to two groups for the inlay preparation. Group 1 prepared a plain tooth model for the first and fourth attempts and a 3D-printed coloured tooth model for the second and third attempts (n = 14). Group 2 prepared four plain tooth models (n = 14). The first and fourth tooth models prepared by both groups were scored using an evaluation system (Fair Grade 2000, NISSIN). Next, questionnaires answered by students were used to evaluate the benefits of using a 3D-printed coloured tooth model and self-evaluate hands-on ability using a grading system (1 = strongly agree, 2 = agree, 3 = neutral, 4 = disagree, and 5 = strongly disagree). The scores were evaluated statistically using the Mann-Whitney U test, and the given grades are displayed as percentages and mean values. RESULTS: There was an overall increase in the clinical confidence of all students after repeated attempts to prepare an inlay; however, students from group 1, who had used the 3D-printed coloured tooth model, had more positive experiences and comments. The 3D-printed coloured tooth model for inlay preparation has been widely praised by participants. Comparing the average score of the first and fourth preparations, the average score of group 1 increased by 12% (Ø 54.46 ± 8.33, Ø 61.11 ± 7.13, p = .090), while that of group 2 increased by 0.72% (Ø 56.39 ± 9.59, Ø 56.80 ± 8.46, p = .925). CONCLUSION: Students favoured the use of the 3D-printed coloured tooth model, and this improved the average score for inlay preparation. The 3D-printed coloured tooth model for inlay preparation is expected to play an important role in dental education in the future.

[Progress on historical evolution, clinical application, and pharmacological effects of Dachaihu Decoction and predictive analysis of its quality markers].

Dachaihu Decoction is a classic prescription with the function of harmonizing Shaoyang and purging away internal stasis of heat, which was specially developed by Master ZHANG Zhongjing for the concurrent disease of Shaoyang and Yangming. A large number of international studies have shown that Dachaihu Decoction has liver protection, gallbladder benefit, anti-inflammatory, and other pharmacological effects and is mostly used in modern clinical treatment of acute pancreatitis, acute cholecystitis, cholelithiasis, and other digestive diseases. This paper combined bibliography and statistics and selected the ancient book database and CNKI database to search the relevant literature on Dachaihu decoction, verify the composition and dosage, processing method, main diseases, and modern clinical application, and predict its quality markers(Q-markers) based on the "five principles" of Q-markers. The results suggest that saikosaponin a, baicalin, and 6-gingerol can be selected as potential Q-markers for Dachaihu Decoction, so as to provide a basis for the clinical research of traditional Chinese medicine and the development and application of compound preparations.

Atomic Level-Macroscopic Structure-Activity of Inhomogeneous Localized Aggregates Enabled Ultra-Low Temperature Hybrid Aqueous Batteries.

The utilization of hybrid aqueous electrolytes has significantly broadened the electrochemical and temperature ranges of aqueous batteries, such as aqueous zinc and lithium-ion batteries, but the design principles for extreme operating conditions remain poorly understood. Here, we systematically unveil the ternary interaction involving salt-water-organic co-solvents and its intricate impacts on both the atomic-level and macroscopic structural features of the hybrid electrolytes. This highlights a distinct category of micelle-like structure electrolytes featuring organic-enriched phases and nanosized aqueous electrolyte aggregates, enabled by appropriate low donor number co-solvents and amphiphilic anions. Remarkably, the electrolyte enables exceptional high solubility, accommodating up to 29.8 m zinc triflate within aqueous micelles. This configuration maintains an intra-micellar salt-in-water setup, allowing for a broad electrochemical window (up to 3.86 V), low viscosity, and state-of-the-art ultralow-temperature zinc ion conductivity (1.58 mS cm-1 at -80°C). Building upon the unique nature of the inhomogeneous localized aggregates, this micelle-like electrolyte facilitates dendrite-free Zn plating/stripping, even at -80°C. The assembled Zn||PANI battery showcases an impressive capacity of 71.8 mAh g-1 and an extended lifespan of over 3000 cycles at -80°C. This study opens up a promising approach in electrolyte design that transcends conventional local atomic solvation structures, broadening the water-in-salt electrolyte concept.

Monolithic Interphase Enables Fast Kinetics for High-Performance Sodium-Ion Batteries at Subzero Temperature.

In spite of the competitive performance at room temperature, the development of sodium-ion batteries (SIBs) is still hindered by sluggish electrochemical reaction kinetics and unstable electrode/electrolyte interphase under subzero environments. Herein, a low-concentration electrolyte, consisting of 0.5M NaPF6 dissolving in diethylene glycol dimethyl ether solvent, is proposed for SIBs working at low temperature. Such an electrolyte generates a thin, amorphous, and homogeneous cathode/electrolyte interphase at low temperature. The interphase is monolithic and rich in organic components, reducing the limitation of Na+ migration through inorganic crystals, thereby facilitating the interfacial Na+ dynamics at low temperature. Furthermore, it effectively blocks the unfavorable side reactions between active materials and electrolytes, improving the structural stability. Consequently, Na0.7Li0.03Mg0.03Ni0.27Mn0.6Ti0.07O2//Na and hard carbon//Na cells deliver a high capacity retention of 90.8 % after 900 cycles at 1C, a capacity over 310 mAh g-1 under -30 °C, respectively, showing long-term cycling stability and great rate capability at low temperature.

Vespa: Integrated applications for RF pulse design, spectral simulation and MRS data analysis.

PURPOSE: The Vespa package (Versatile Simulation, Pulses, and Analysis) is described and demonstrated. It provides workflows for developing and optimizing linear combination modeling (LCM) fitting for 1 H MRS data using intuitive graphical user interface interfaces for RF pulse design, spectral simulation, and MRS data analysis. Command line interfaces for embedding workflows in MR manufacturer platforms and utilities for synthetic dataset creation are included. Complete provenance is maintained for all steps in workflows. THEORY AND METHODS: Vespa is written in Python for compatibility across operating systems. It embeds the PyGAMMA spectral simulation library for spectral simulation. Multiprocessing methods accelerate processing and visualization. Applications use the Vespa database for results storage and cross-application access. Three projects demonstrate pulse, sequence, simulation, and data analysis workflows: (1) short TE semi-LASER single-voxel spectroscopy (SVS) LCM fitting, (2) optimizing MEGA-PRESS (MEscher-GArwood Point RESolved Spectroscopy) flip angle and LCM fitting, and (3) creating a synthetic short TE dataset. RESULTS: The LCM workflows for in vivo basis set creation and spectral analysis showed reasonable results for both the short TE semi-LASER and MEGA-PRESS. Examples of pulses, simulations, and data fitting are shown in Vespa application interfaces for various steps to demonstrate the interactive workflow. CONCLUSION: Vespa provides an efficient and extensible platform for characterizing RF pulses, pulse design, spectral simulation optimization, and automated LCM fitting via an interactive platform. Modular design and command line interface make it easy to embed in other platforms. As open source, it is free to the MRS community for use and extension. Vespa source code and documentation are available through GitHub.

Combination of microbial and chemical synthesis for the sustainable production of ß-elemene, a promising plant-extracted anticancer compound.

Beta-elemene, a class of sesquiterpene derived from the Chinese medicinal herb Curcuma wenyujin, is widely used in clinical medicine due to its broad-spectrum antitumor activity. However, the unsustainable plant extraction prompted the search for environmentally friendly strategies for ß-elemene production. In this study, we designed a Yarrowia lipolytica cell factory that can continuously produce germacrene A, which is further converted into ß-elemene with 100% yield through a Cope rearrangement reaction by shifting the temperature to 250°C. First, the productivity of four plant-derived germacrene A synthases was evaluated. After that, the metabolic flux of the precursor to germacrene A was maximized by optimizing the endogenous mevalonate pathway, inhibiting the competing squalene pathway, and expressing germacrene A synthase gene in multiple copies. Finally, the most promising strain achieved the highest ß-elemene titer reported to date with 5.08 g/L. This sustainable and green method has the potential for industrial ß-elemene production.

A robust soft sensor based on artificial neural network for monitoring microbial lipid fermentation processes using Yarrowia lipolytica.

Microbial oils produced by Yarrowia lipolytica offer an environmentally friendly and sustainable alternative to petroleum as well as traditional lipids from animals and plants. The accurate measurement of fermentation parameters, including the substrate concentration, dry cell weight, and lipid accumulation, is the foundation of process control, which is indispensable for industrial lipid production. However, it remains a great challenge to measure the complex parameters online during the lipid fermentation process, which is nonlinear, multivariate, and characterized by strong coupling. As a type of AI technology, the artificial neural network model is a powerful tool for handling extremely complex problems, and it can be employed to develop a soft sensor to monitor the microbial lipid fermentation process of Y. lipolytica. In this study, we first analyzed and emphasized the volume of sodium hydroxide and dissolved oxygen concentration as central parameters of the fermentation process. Then, a soft sensor based on a four-input artificial neural network model was developed, in which the input variables were fermentation time, dissolved oxygen concentration, initial glucose concentration, and additional volume of sodium hydroxide. This provides the possibility of online monitoring of dry cell weight, glucose concentration, and lipid production with high accuracy, which can be extended to similar fermentation processes characterized by the addition of bases or acids, as well as changes of the dissolved oxygen concentration.

Light-Driven Electron Uptake from Nonfermentative Organic Matter to Expedite Nitrogen Dissimilation by Chemolithotrophic Anammox Consortia.

Nonphotosynthetic microorganisms are typically unable to directly utilize light energy, but light might change the metabolic pathway of these bacteria indirectly by forming intermediates such as reactive oxygen species (ROS). This work investigated the role of light on nitrogen conversion by anaerobic ammonium oxidation (anammox) consortia. The results showed that high intensity light (>20000 lx) caused ca. 50% inhibition of anammox activity, and total ROS reached 167% at 60,000 lx. Surprisingly, 200 lx light was found to induce unexpected promotion of the nitrogen conversion rate, and ultraviolet light (<420 nm) was identified as the main contributor. Metagenomic and metatranscriptomic analyses revealed that the gene encoding cytochrome c peroxidase was highly expressed only under 200 lx light. 15N isotope tracing, gene abundance quantification, and external H2O2 addition experiments showed that photoinduced trace H2O2 triggered cytochrome c peroxidase expression to take up electrons from extracellular nonfermentative organics to synthesize NADH and ATP, thereby expediting nitrogen dissimulation of anammox consortia. External supplying reduced humic acid into a low-intensity light exposure system would result in a maximal 1.7-fold increase in the nitrogen conversion rate. These interesting findings may provide insight into the niche differentiation and widespread nature of anammox bacteria in natural ecotopes.

Improved visible light triggered photocatalytic activities of BiOCl photocatalysts via a synergistic effect of doping and heterojunction engineering.

To manipulate the photocatalytic activities of BiOCl photocatalysts, doping and heterojunction engineering are simultaneously adopted. Herein, the photocatalysts Sm3+-doped BiOCl and BiOCl:Sm3+@yg-C3N4 were designed, in which their phase structure, morphology, optical properties and photocatalytic activities were systematically discussed. Excited at 408 nm, red emissions are seen from Sm3+-doped BiOCl microplates and their intensities were impacted by doping content, reaching the maximum value when the Sm3+ content was 1 mol% and the involved concentration mechanism was dominated by quadrupole-quadrupole interaction. Through analyzing the degradation of TC, the visible light triggered photocatalytic behaviors of the resultant compounds were studied. Compared with BiOCl microplates, an improved TC removal ability was seen in Sm3+-doped BiOCl microplates and the products with a Sm3+ content of 0.5 mol% show the best performance. Moreover, through constructing the heterojunction with g-C3N4, the TC removal capacity was further enhanced and the BiOCl:Sm3+@60%g-C3N4 exhibits the optimal photocatalytic activity, which was also much better than that of the commercial SnO2 and TiO2. Accordingly, the ˙O2-, h+ and ˙OH active species were proven to contribute to the involved visible light driven photocatalytic mechanism. Furthermore, the separation and recombination of photogenerated carries via the Z-scheme transfer process in the designed heterojunction composites, led to splendid photocatalytic properties. Additionally, it was verified that the TC solution treated with synthesized compounds was nontoxic toward plant growth. Our findings may propose an available route to regulate the photocatalytic performance of the visible light driven photocatalysts.