Assessing the effects of elevated ozone on physiology, growth, yield and quality of soybean in the past 40 years: A meta-analysis.

Soybean (Glycine max) production is seriously threatened by ground-level ozone (O3) pollution. The goal of our study is to summarize the impacts of O3 on physiology, growth, yield, and quality of soybean, as well as root parameters. We performed meta-analysis on the collated 48 peer-reviewed papers published between 1980 and 2019 to quantitatively summarize the response of soybean to elevated O3 concentrations ([O3]). Relative to charcoal-filtered air (CF), elevated [O3] significantly accelerated chlorophyll degradation, enhanced foliar injury, and inhibited growth of soybean, evidenced by great reductions in leaf area (-20.8%), biomass of leaves (-13.8%), shoot (-22.8%), and root (-16.9%). Shoot of soybean was more sensitive to O3 than root in case of biomass. Chronic ozone exposure of about 75.5 ppb posed pronounced decrease in seed yield of soybean (-28.3%). In addition, root environment in pot contributes to higher reduction in shoot biomass and yield of soybean. Negative linear relationships were observed between yield loss and intensity of O3 treatment, AOT40. The larger loss in seed yield was significantly associated with higher reduction in shoot biomass and other yield component. This meta-analysis demonstrates the effects of elevated O3 on soybean were pronounced, suggesting that O3 pollution is still a soaring threat to the productivity of soybean in regions with high ozone levels.

Phylogeny and ecological processes influence grass coexistence at different spatial scales within the steppe biome.

Phylogenetic analyses are essential for disentangling how environmental filtering and competition determine species coexistence across spatial scales. Inner Mongolia steppe has strong environmental gradients, but how the phylogenetic relatedness of co-occurring species and phylogenetic signals of functional traits change across spatial scales remains unclear. We investigated the phylogenetic structure of grass assemblages along environmental gradients from regional to local scales, and measured functional traits within assemblages. We compared phylogenetic signals of plant traits between the same numbers of species randomly selected from the regional pool and species observed at the local scale, did phylogenetic principal component analysis to infer the main factors driving species coexistence, and examined the key plant trait-environment relationships across the phylogeny to reveal ecological adaptation mechanisms. Regionally, grass species were phylogenetically clustered with contrasting climate preferences. With decreasing spatial scales, species richness declined, changing from phylogenetically clustered to overdispersed, and phylogenetic signals of plant traits became weaker. At the local scale, grass assemblages were structured by soil water content and neighbor density, and the trait-environment relationships were less clear than those at the regional scale. This study demonstrated that at smaller scales, co-occurring grass species in the steppe tended to be more phylogenetically overdispersed, and that phylogenetic signals of plant functional traits became weaker with increasing abiotic and biotic interactions. Our findings contributed evidence for understanding species coexistence and maintenance at scales spanning regional to local communities in the East Asia steppe biome.

Human Motion Recognition of Knitted Flexible Sensor in Walking Cycle.

Knitted fabric sensors have been widely used as strain sensors in the sports health field and its large strain performance and structure are suitable for human body movements. When a knitted structure is worn, different human body movements are reflected through the large strain deformation of fabric structure and consequently change the electrical signal. Here, the mechanical and electrical properties of highly elastic knitted sweatpants were tested under large strain. This sensor has good sensitivity and stability during movement. Compared with traditional motion monitoring, this technique divides the walking cycle into two stages, namely, stance and swing phases, which can be further subdivided into six stages. The corresponding resistance characteristic values can accurately distinguish the gait cycle. Analysis on hysteresis and repeatability revealed that the sensor exhibits a constant electrical performance. Four kinds of motion postures were predicted and judged by comparing the resistance characteristic range value, peak value calculation function and time axis. The measured sensor outputs were transferred to a computer via 4.0 Bluetooth. Matlab language was used to detect the status through a rule-based algorithm and the sensor outputs.

Highly Stretchable and Multimodal MXene/CNTs/TPU Flexible Resistive Sensor with Hierarchical Structure Inspired by Annual Ring for Hand Rehabilitation.

With the advent of the intelligent age and people's higher pursuit of health, wearable sensors with functions of health monitoring and assisting physical rehabilitation are increasingly favored by consumers. Wherein, highly stretchable flexible sensors show promising potential, but the unstable conductivity under large strains remains a great challenge to develop flexible wearable sensors with both a wide work range and strain insensitivity. Based on this, a MXene/CNTs/TPU flexible resistive sensor (MCT/FRS) with hierarchical structure inspired by the annual ring was proposed. Benefiting from the bioinspired structure with tightly warped inner layers and deformable spring structure outside, the MCT/FRSs enable stable sensing over a wide working range of up to 700% under the stretching mode, as well as superior durability (7500 cycles). It also possessed linear and adjustable piezoresistive properties under the compression mode. Finally, the sensor was not only successfully employed for monitoring various human movements but also was utilized to assist hand rehabilitation in patients with Guillain-Barré syndrome in both stretching and compression modes. This work provides promising and attractive solutions for flexible wearable devices and intelligent medical care.

All-Textile Piezoelectric Nanogenerator Based on 3D Knitted Fabric Electrode for Wearable Applications.

Flexible, air permeable and elastic self-powered sensors for human motion monitoring and assisted medical rehabilitation have recently become a hot research topic. However, most current piezoelectric sensors can not account for many characteristics. Addressing this challenge, an all-textile piezoelectric sensor (ATPS) based on 3D structured knitted fabric electrodes is reported. The ATPS consists of a piezoelectric element polyvinylidene fluoride nanofiber membrane, flexible knitted fabric electrodes, and an elastic self-adhesive bandage. Based on the flexible and efficient knitting technology, the sensor has the advantages of low cost, flexibility, simple structure, and convenient large-area manufacturing. Experimental and finite element simulation results show that the knitting pattern of fabric electrodes can enhance the piezoelectric output of ATPS. The optimal ATPS has a high voltage response sensitivity of up to 0.68 V/kPa. The proposed ATPS responds to a wide range of input forces from 0.098 to 724 N in self-powered mode, verifying its feasibility as a tactile sensor for human motion detection and recognition (throat swallowing, wrist bending, elbow bending, knee bending, walking slowly, running fast) and as a pressure sensor (Morse code, digit recognition) and demonstrating its potential for motion tracking, medical rehabilitation, and human-computer interaction.

Recent advancements and perspectives on processable natural biopolymers: Cellulose, chitosan, eggshell membrane, and silk fibroin.

With the rapid development of the global economy and the continuous consumption of fossil resources, sustainable and biodegradable natural biomass has garnered extensive attention as a promising substitute for synthetic polymers. Due to their hierarchical and nanoscale structures, natural biopolymers exhibit remarkable mechanical properties, along with excellent innate biocompatibility and biodegradability, demonstrating significant potential in various application scenarios. Among these biopolymers, proteins and polysaccharides are the most commonly studied due to their low cost, abundance, and ease of use. However, the direct processing/conversion of proteins and polysaccharides into their final products has been a long-standing challenge due to their natural morphology and compositions. In this review, we emphasize the importance of processing natural biopolymers into high-value-added products through sustainable and cost-effective methods. We begin with the extraction of four types of natural biopolymers: cellulose, chitosan, eggshell membrane, and silk fibroin. The processing and post-functionalization strategies for these natural biopolymers are then highlighted. Alongside their unique structures, the versatile potential applications of these processable natural biopolymers in biomedical engineering, biosensors, environmental engineering, and energy applications are illustrated. Finally, we provide a summary and future outlook on processable natural biopolymers, underscoring the significance of converting natural biopolymers into valuable biomaterial platforms.

Robust Piezoelectric Biomolecular Membranes from Eggshell Protein for Wearable Sensors.

Flexible and wearable devices are drawing increasing attention due to their promising applications in energy harvesting and sensing. However, the application of wearable devices still faces great challenges, such as flexibility, repeatability, and biodegradability. Biopiezoelectric materials have been regarded as favorable energy-harvesting sources due to their nontoxicity and biocompatibility. Here, a wearable and biodegradable sensor is proposed to monitor human activities. The proposed sensor is fabricated via a low-cost, facile, and scalable electrospinning technology from nanofibers composed of eggshell membranes mixed with polyethylene oxide. It is shown that the sensor exhibits excellent flexibility, outstanding degradability, and mechanical stability over 3000 cycles under periodic stimulation. The device displays multiple potential applications, including the recognition of different objects, human motion monitoring, and active voice recognition. Finally, it is shown that the composite nanofiber membrane has good degradability and breathability. With excellent sensing performance, environmental friendliness, and ease of processing, the eggshell membrane-based sensor could be a promising candidate for greener and more environmentally friendly devices for application in implantable and wearable electronics.

Size Prediction and Electrical Performance of Knitted Strain Sensors.

Benefitting from the multifunctional properties of knitted fabrics with elasticity, flexibility, and high resilience, knitted strain sensors based on structure and strain performance are widely utilized in sports health due to their adaptability to human movements. However, the fabrication process of common strain sensors mainly relies on experienced technicians to determine the best sensor size through repeated experiments, resulting in significant size errors and a long development cycle. Herein, knitted strain sensors based on plain knit were fabricated with nylon/spandex composite yarn and silver-plated nylon yarn using a flat knitting process. A size prediction model of knitted strain sensors was established by exploring the linear relationship between the conductive area size of samples and knitting parameters via SPSS regression analysis. Combined with stable structures and high performance of good sensitivity, stability, and durability, the knitted strain sensors based on size prediction models can be worn on human skin or garments to monitor different movements, such as pronunciation and joint bending. This research indicated that the reasonable size control of the knitted strain sensor could realize its precise positioning in intelligent garments, exhibiting promising potential in intelligent wearable electronics.

Innovatively treat rural food waste through producing organic grains.

Food waste (FW) in a whole country contains a large amount of nitrogen which could be used to replace chemical fertilizers to produce organic grains, thus mitigating environmental pollution from the source. A 2-year field experiment was carried out using rural FW to grow organic grains in Shandong Province, China. Different proportions of FW and cattle manure were designed: FM0, 100% cattle manure compost (CMC); FM1, 75% CMC + 25% FW; FM2, 50% CMC + 50% FW; FM3, 25% CMC + 75% FW; FM4, 100% FW; CF, 100% chemical fertilizer; CK, without any fertilizers. Compared with CK and FM0, the application of FW significantly increased the total nitrogen, total phosphorus, and total potassium content of the soil. Simultaneously, all the three indicators increased with the increase of the proportion of FW. FW did not cause increase of contents of heavy metals such as cuprum, zinc, and chromium in the soils, nor did it increase the heavy metals in the grains. Using FW to replace all cattle manure, the total organic yield of grains reached to an average of 18,163 kg ha-1. We found that 1 kg dry FW could produce 1.64 kg organic grains under organic conditions, with the average net income being 5.42 times that of chemical mode. Our findings may provide an innovative solution for treating rural food wastes, ensuring food safety, and conservating the agriculture ecosystem.

Exploring the nitrogen reservoir of biodegradable household garbage and its potential in replacing synthetic nitrogen fertilizers in China.

Biodegradable household garbage contains a large amount of nitrogen, which could be used as organic fertilizer to produce organic food and significantly reduce synthetic nitrogen fertilizers. There is limited information on how large the nitrogen reservoir of biodegradable household garbage is in a certain country or region. Here we took China as a case, analyzed the amount of biodegradable household garbage resources and their nitrogen reservoirs. It was noted that the biodegradable household garbage mainly included food waste, waste paper and wood chips, with the amount being 31.56, 29.55, and 6.45 × 106 t·a-1, respectively. Accordingly, the nitrogen reservoirs were 65.31 × 104, 6.80 × 104, and 3.81 × 104 t·a-1 in China. The nitrogen reservoir of food waste accounted for 86% of the total nitrogen reservoir of biodegradable household garbage, which was equivalent to 11% of the amount of actual absorption for synthetic nitrogen fertilizers (6.20 × 106 t·a-1) by agriculture plants in China. Our findings provided a scientific basis for the classification and utilization of biodegradable household garbage.

Cadmium pollution enhanced ozone damage to winter wheat: biochemical and physiological evidences.

Combined effects of ozone (03) and cadmium (Cd) on growth and physiology of winter wheat (Triticum aestivum L. cv. JM22) were determined. Wheat plants were grown without or with Cd and exposed to charcoal-filtered air (< 10 ppb O3) or elevated O3 (80 +/- 5 ppb, 7 hr/day) for 20 days. Results showed that 03 considerably depressed light saturated net photosynthetic rate (-20%), stomatal conductance (-33%), chlorophyll content (-33%), and total biomass (-29%) without Cd. The corresponding decreases were further enhanced by 45%, 56%, 60% and 59%, respectively with Cd, indicating a synergistic effect of O3 and Cd on wheat. Ozone significantly increased the activity of superoxide dismutase (46%), catalase (48%) and peroxidase (56%). However, great increases in malondialdehyde (MDA) content (2.55 folds) and intercellular CO2 concentration (1.13 folds) were noted in O3+Cd treatment compared to control. Our findings demonstrated that the increased anti-oxidative activities in wheat plants exposed to O3+Cd might not be enough to overcome the adverse effects of the combination of both pollutants as evidenced by further increase in MDA content, which is an important indicator of lipid peroxidation. Precise prediction model on O3 damages to crop should be conducted to ensure agricultural production security by considering environmental constraints in an agricultural system in peri-urban regions.

Major energy plants and their potential for bioenergy development in China.

China is rich in energy plant resources. In this article, 64 plant species are identified as potential energy plants in China. The energy plant species include 38 oilseed crops, 5 starch-producing crops, 3 sugar-producing crops and 18 species for lignocellulosic biomass. The species were evaluated on the basis of their production capacity and their resistance to salt, drought, and/or low temperature stress. Ten plant species have high production and/or stress resistance and can be potentially developed as the candidate energy plants. Of these, four species could be the primary energy plants in China: Barbados nut (Jatropha curcas L.), Jerusalem artichoke (Helianthus tuberosus L.), sweet sorghum (Sorghum bicolor L.) and Chinese silvergrass (Miscanthus sinensis Anderss.). We discuss the use of biotechnological techniques such as genome sequencing, molecular markers, and genetic transformation to improve energy plants. These techniques are being used to develop new cultivars and to analyze and manipulate genetic variation to improve attributes of energy plants in China.

Surface Morphology Analysis of Knit Structure-Based Triboelectric Nanogenerator for Enhancing the Transfer Charge.

Harvesting waste biomechanical energy has provided a promising approach to improve the power supplement of wearable devices for extending usage life. Surface morphology is a significant factor for enhancing output performance of triboelectric nanogenerator; however, there is a limitation for evaluating the morphology of the surface and its impact on power generation. To evaluate the relationship between the surface morphology and transfer charge, there is a mathematical theory that is the fractal geometry theory that has been proposed to analyze the characteristic of irregular surface morphology. This theory provided a good understanding of the contact area and roughness of the surface. We have designed three categories of knit structures with cord appearance by using a flat knitting machine and analyzed their surface characteristics. Meanwhile, the geometric structures can be demonstrated through the fractal dimension for evaluating the generated output performance during contacting and separation. The present research exhibits that, with the increasing number of knitted units, the triboelectric power-generation performance continued to reduce due to the available contact area decreasing. After calculating the fractal dimension of different knit structures, the m*n rib structures show the high transfer charge when the fractal dimension is close to number one, especially the fractal dimension of the 1*1 rib structure that can reach 0.99. The fractal theory can be further used as an approach to evaluate the influence on the output performance of irregular surface morphology, unrelated to the uniform convex unit distraction. The result of this research also demonstrated the feasibility of a knitted-based triboelectric nanogenerator in scavenging biomechanical energy for powering portable electronics integrated into garments.

Using organic fertilizers to increase crop yield, economic growth, and soil quality in a temperate farmland.

We used a constant total N application base rate to conduct a two-year field experiment comparing the effects of three organic fertilizers (rapeseed meal (RSM), soybean meal (SBM), and cattle manure (CM)) on the crop yield, economic growth, and soil quality of a winter wheat-summer maize rotation system. Winter wheat and summer maize in rapeseed meal treatment (RSMT), soybean meal treatment (SBMT), and cattle manure treatment (CMT) showed yield increases of 161%, 299%, and 256%, respectively, when compared to no organic fertilizer treatment (CK) (P < 0.05). The annual net incomes of SBMT and CMT were 1.46 and 1.42 times higher, respectively, than RSMT. Compared to the results of the CK group, RSM, SBM, and CM stimulated the soil physically, chemically, and biologically. We found the highest soil macroaggregate proportions, soil organic matter (SOM) levels, total N (TN) levels, and phospholipid fatty acid (PLFA) levels in SBMT. The highest soil pH, microbial biomass carbon (MBC) levels, and microbial biomass nitrogen (MBN) levels were observed in CMT. We used a soil quality index (SQI) to evaluate soil quality. After the two-year fertilization treatments, we calculated the SQI using a minimum data set (MDS). We used SOM levels and actinomycete quantity for the MDS properties. The SQI values were significantly different across the four treatments, with the highest values occurring in SBMT, then CMT and RSMT. In conclusion, SBM and CM were more effective than RSM at maintaining crop yield, economic growth, and soil quality.

Lutein-mediated photoprotection of photosynthetic machinery in Arabidopsis thaliana exposed to chronic low ultraviolet-B radiation.

Ecologically relevant low UV-B is reported to alter reactive oxygen species metabolism and anti-oxidative systems through an up-regulation of enzymes of the phenylpropanoid pathway. However, little is known about low UV-B-induced changes in carotenoid profile and their impacts on light harvesting and photoprotection of photosystem II (PSII) in plants. We investigated carotenoids profile, chlorophyll pigments, phenolics, photosynthetic efficiency and growth in Arabidopsis thaliana (Col-0) plants grown under photosynthetically active radiation (PAR), PAR+ ultraviolet (UV)-A and PAR+UV-A+B regimes for 10 days in order to assess plant acclimation to low UV-B radiation. A chlorophyll fluorescence assay was used to examine UV-B tolerance in plants further exposed to acute high UV-B for 4 and 6 h following a 10-day growth under different PAR and UV regimes. We found that both PAR+ UV-A and PAR+UV-A+B regimes had no negative effect on quantum efficiency, electron transport rate, rosette diameter, relative growth rate and shoot dry weight of plants. Chronic PAR+ UV-A regime considerably (P < 0.05) increased violaxanthin (26 %) and neoxanthin (92 %) content in plants. Plant exposure to chronic PAR+UV-A+B significantly (P < 0.05) increased violaxanthin (48 %), neoxanthin (63 %), lutein (33 %), 9-cis ß-carotene (28 %), total ß-carotene (29 %) and total phenolics (108 %). The maximum photochemical efficiency (Fv/Fm) in leaves was found to be positively correlated with total phenolics (rho = 0.81 and rho = 0.91, P < 0.05 for 4 and 6 h, respectively) and non-photochemical quenching (qN) (rho = 0.81 and rho = 0.84, P < 0.05 for 4 and 6 h, respectively) in plants exposed to acute high UV-B for 4 and 6 h following a 10-day growth under chronic PAR+UV-A+B. There was also a significant positive correlation (rho = 0.93, P < 0.01) between qN and lutein content in the plants exposed to acute high UV-B stress for 4 h following plant exposure to chronic PAR+UV-A+B. The findings from our study indicate that plants grown under chronic PAR+UV-A+B displayed higher photoprotection of PSII against acute high UV-B stress than those grown under PAR and PAR+ UV-A regimes. An induction of phenolics and lutein-mediated development of qN were involved in the photoprotection of PSII against UV-B-induced oxidative stress.

Leaf-level plasticity of Salix gordejevii in fixed dunes compared with lowlands in Hunshandake Sandland, North China.

To cope with adverse environments, the majority of indigenous plants in arid regions possess adaptive plasticity after long-term evolution. Leaf-level morphology, anatomy, biochemical properties, diurnal water potential and gas exchange of Salix gordejevii distributed in fixed dunes and lowlands in Hunshandake Sandland, China, were compared. Compared to plants growing in lowlands, individuals of S. gordejevii in fixed dunes displayed much smaller leaf area (0.26 vs 0.70 cm(2)) and thicker leaves (leaf total thickness 148.59 vs 123.44 mum), together with heavier crust wax, denser hairs, and more compacted epidermal cells. Moreover, those growing in fixed dunes displayed stronger drought-resistance properties as evidenced by higher levels of proline (3.68 vs 0.20 mg g(-1) DW) and soluble sugar (17.24 vs 14.49%). Furthermore, S. gordejevii in fixed dunes demonstrated lower water potential and lower light compensation point (28.8 vs 51.9 micromol m(-2) s(-1)). Our findings suggest that morphological and/or anatomical plasticity in leaves has had great adaptive value for Salix in responding to deteriorating environments. The evidence provided here may facilitate the prediction of plant adaptation in community succession in sandy habitats.

Preparation and Performances of Warp-Knitted Hernia Repair Mesh Fabricated with Chitosan Fiber.

In this paper, warp-knitted knitted fabrics with chitosan fibers for ventral hernia repair were fabricated with three kinds of structures. The properties of chitosan fiber, yarns, and fabrics were tested. The results demonstrated that the properties of a mesh fabricated with 1-0/1-2/2-3/2-1// structure were slightly better than those of other fabrics. The mechanical properties of the three produced fabrics were weak. However, the results demonstrated that chitosan meshes have many advantages, such as excellent hygroscopicity, and thermal and antimicrobial properties, which makes them one of the best materials for ventral hernia repair. The findings have theoretical and practical significance for the industrial uses of chitosan in ventral hernia repair.

Responses of weed community, soil nutrients, and microbes to different weed management practices in a fallow field in Northern China.

The long-term use of herbicides to remove weeds in fallow croplands can impair soil biodiversity, affect the quality of agricultural products, and threaten human health. Consequently, the identification of methods that can effectively limit the weed seed bank and maintain fallow soil fertility without causing soil pollution for the next planting is a critical task. In this study, four weeding treatments were established based on different degrees of disturbance to the topsoil: natural fallow (N), physical clearance (C), deep tillage (D), and sprayed herbicide (H). The changes in the soil weed seed banks, soil nutrients, and soil microbial biomass were carefully investigated. During the fallow period, the C treatment decreased the annual and biennial weed seed bank by 34% against pretreatment, whereas the H treatment did not effectively reduce the weed seed bank. The D treatment had positive effects on the soil fertility, increasing the available nitrogen 108% over that found in the N soil. In addition, a pre-winter deep tillage interfered with the rhizome propagation of perennial weeds. The total biomass of soil bacterial, fungal, and actinomycete in H treatment was the lowest among the four treatments. The biomass of arbuscular mycorrhizal fungi in the N treatment was respectively 42%, 35%, and 91%, higher than that in the C, D, and H treatments. An ecological weeding strategy was proposed based on our findings, which called for exhausting seed banks, blocking seed transmission, and taking advantage of natural opportunities to prevent weed growth for fallow lands. This study could provide a theoretical basis for weed management in fallow fields and organic farming systems.

Potential of constructed wetlands in treating the eutrophic water: evidence from Taihu Lake of China.

Three parallel units of pilot-scale constructed wetlands (CWs), i.e., vertical subsurface flow (VSF), horizontal subsurface flow (HSF) and free water surface flow (FWS) wetland were experimented to assess their capabilities in purifying eutrophic water of Taihu Lake, China. Lake water was continuously pumped into the CWs at a hydraulic loading rate of 0.64 m d(-1) for each treatment. One year's performance displayed that average removal rates of chemical oxygen demand (COD), ammonia nitrogen (NH(4)(+)-N), nitrate nitrogen (NO(3)(-)-N), total nitrogen (TN) and total phosphorous (TP) were 17-40%, 23-46%, 34-65%, 20-52% and 35-66%, respectively. The VSF and HSF showed statistically similar high potential for nutrients removal except NH(4)(+)-N, with the former being 14% higher than that of the latter. However, the FWS wetland showed the least effect compared to the VSF and HSF at the high hydraulic loading rate. Mean effluent TP concentrations in VSF (0.056 mg L(-1)) and HSF (0.052 mg L(-1)) nearly reached Grade III (0.05 mg L(-1) for lakes and reserviors) water quality standard of China. Wetland plants (Typha angustifolia) grew well in the three CWs. We noted that plant uptake and storage were both important factors responsible for nitrogen and phosphorous removal in the three CWs. However, harvesting of the above ground biomass contributed 20% N and 57% P of the total N and P removed in FWS wetland, whereas it accounted for only 5% and 7% N, and 14% and 17% P of the total N and P removed in VSF and HSF CWs, respectively. Our findings suggest that the constructed wetlands could well treat the eutrophic lake waters in Taihu. If land limiting is considered, VSF and HSF are more appropriate than FWS under higher hydraulic loading rate.

Invasion possibility and potential effects of Rhus typhina on Beijing municipality.

Rhus typhina, an alien species introduced from North America, was identified as a main afforestation species in Beijing municipality. However, its invasiveness is still at odds. To clarify this problem, we applied the North American Screening System and the Australian Screening System to preliminarily predict its invasion possibility. Both screening systems gave the same recommendation to "reject". The geographical distribution was surveyed, with the population features of R. typhina against the native plant communities being assessed. With anthropogenic assistance, R. typhina has been scattered on almost all habitats from downtown to mountains, including roadsides, farmlands and protected areas. As a clonal shrub, R. typhina possessed a high spreading rate, varying from 6.3 m/3 years at sterile habitats to 6.7 m/3 years at fertile ones. Significantly lower species richness, individual density and diversity were observed in the R. typhina community than those of the native Vitex negundo Linn.var. heterophylla (Franch.) Rehd. community at both sterile and fertile habitats. Continual wide plantation of R. typhina may further foster its population expansion, which helps the species to overcome spatial isolation. The fact that each root fragment can develop into a new individual makes R. typhina very difficult to be eradicated once established. From a biological point of view, we believe that R. typhina is a plant invader in Beijing. We therefore suggest the government should remove the name of R. typhina from the main tree species list in afforesting Beijing.