Sequential administration of delta-tocotrienol ameliorates radiation-induced myelosuppression in mice and non-human primates through inducing G-CSF production.

To date only four recombinant growth factors, including Filgrastim (rhG-CSF), have been approved by FDA as radiomitigators to ameliorate hematopoietic acute radiation syndrome (H-ARS). These approved agents are not stable under room-temperature, needing to be stored at 2-8 °C, and would not be feasible in a mass casualty scenario where rapid and cost-effective intervention is crucial. Delta-tocotrienol (δ-T3H), the most potent G-CSF-inducing agent among vitamin E isoforms, exhibited efficiency and selectivity on G-CSF production in comparison with TLR and STING agonists in mice. Five-dose δ-T3H was utilized as the optimal therapeutic regimen due to long-term G-CSF production and the best peripheral blood (PB) recovery of irradiated mice. Comparable with rhG-CSF, sequential administration of δ-T3H post-irradiation improved hematologic recovery and accelerated the regeneration of hematopoietic stem cells (HSCs) and hematopoietic progenitor cells (HPCs) in the bone marrow (BM) and spleen of 6.5Gy irradiated mice; and consistently enhanced repopulation of BM-HSCs. In 4.0Gy irradiated nonhuman primates, δ-T3H exhibited comparable efficacy as rhG-CSF to promote PB recovery and colony-formation of BM-HPCs. Altogether, we demonstrated that sequential administration of delta-tocotrienol ameliorates radiation-induced myelosuppression in mice and non-human primates through inducing G-CSF production, indicated δ-T3H as a promising radiomitigator for the management of H-ARS, particularly in a mass casualty scenario.

Dissolving microneedles loaded with nimodipine for prevention of sleep disorders at a high altitude.

Sleep disorders are one of the most common acute reactions on the plateau, which can cause serious complications. However, there is no effective and safe treatment currently available. Nimodipine (NMD) is a dihydropyridine calcium channel blocker with neuroprotective and vasodilating activity, mainly used for the treatment of ischemic brain injury. Commercial oral or injectable NMD formulations are not a good option for central neuron diseases due to their poor brain delivery. In this study, nimodipine dissolving microneedles (NDMNs) were prepared for the prevention of sleep disorders caused by hypoxia. NDMNs were composed of NMD and polyvinyl pyrrolidone (PVP) K90 with a conical morphology and high rigidity. After administration of NDMNs on the back neck of mice, the concentration of NMD in the brain was significantly higher than that of oral medication as was confirmed by the fluorescent imaging on mouse models. NDMNs enhanced cognitive function, alleviated oxidative stress, and improved the sleep quality of mice with high-altitude sleep disorders. The blockage of calcium ion overloading may be an important modulation mechanism. NDMNs are a promising and user-friendly formulation for the prevention of high-altitude sleep disorders.

Advances in ameliorating inflammatory diseases and cancers by andrographolide: Pharmacokinetics, pharmacodynamics, and perspective.

Andrographolide, a well-known natural lactone having a range of pharmacological actions in traditional Chinese medicine. It has long been used to cure a variety of ailments. In this review, we cover the pharmacokinetics and pharmacological activity of andrographolide which supports its further clinical application in cancers and inflammatory diseases. Growing evidence shows a good therapeutic effect in inflammatory diseases, including liver diseases, joint diseases, respiratory system diseases, nervous system diseases, heart diseases, inflammatory bowel diseases, and inflammatory skin diseases. As a result, the effects of andrographolide on immune cells and the processes that underpin them are discussed. The preclinical use of andrographolide to different organs in response to malignancies such as colorectal, liver, gastric, breast, prostate, lung, and oral cancers has also been reviewed. In addition, several clinical trials of andrographolide in inflammatory diseases and cancers have been summarized. This review highlights recent advances in ameliorating inflammatory diseases as well as cancers by andrographolide and its analogs, providing a new perspective for subsequent research of this traditional natural product.

Intranasal hydrogel of armodafinil hydroxypropyl-ß-cyclodextrin inclusion complex for the treatment of post-traumatic stress disorder.

Armodafinil inclusion complex (AIC) hydrogel was prepared and evaluated for its therapeutic effect on Post-traumatic Stress Disorder (PTSD). After computer simulation and physicochemical property investigation, the AIC was formed by lyophilization of armodafinil with ethanol as solvent and hydroxypropyl-beta-cyclodextrin (HP-ß-CD) aqueous solution, in which the molar ratio of armodafinil and HP-ß-CD was 1-1. The AIC encapsulation efficiency (EE) was (90.98 ± 3.72)% and loading efficiency (LE) was (13.95 ± 0.47)% and it increased the solubility of armodafinil in aqueous solution to 21 times. AIC hydrogel was prepared by adding AIC to methylcellulose (MC) hydrogels (3.33% w/v), and its higher drug release amount and slower release rate were testified by the in-vitro release assay and the rheological test. The mucosa irritation of AIC hydrogel was also evaluated. Healthy group, Model group, Sertraline group with 30 mg/kg sertraline gavage, AIC Hydrogel group with 20 mg/kg AIC hydrogel intranasal administration and AIC Aqueous Solution group with 20 mg/kg AIC aqueous solution gavage were set up for the treatment of mice with PTSD generated from foot shock method. Based on freezing response test in fear-conditioning box and open field test, compared with other groups, PTSD mice in AIC Hydrogel group showed significant improvement in behavioral parameters after 11 days of continuous drug administration and 5 days of drug withdrawal. After sacrifice, the plasma CORT level of PTSD mice in AIC Hydrogel group was elevated compared to Model group. Besides, the western blot (WB) of hippocampal brain-derived neurotrophic factor (BDNF) and amygdala dopamine transporter (DAT) immunohistochemistry sections indicated that AIC hydrogel had a protective effect on the brain tissue of PTSD mice. The brain targeting of intranasal administration was evaluated by fluorescence imaging characteristics of Cy7 hydrogel in the nasal route of drug administration, pharmacokinetics and in-vivo distribution of armodafinil. In short, AIC hydrogel is a promising formulation for the treatment of PTSD based on its high brain delivery and anti-PTSD effect.

3D-Printed Wearable Personalized Orthodontic Retainers for Sustained Release of Clonidine Hydrochloride.

Orthodontic retainers are wearable customizable medical devices for dental protection or alignment. Here, clonidine hydrochloride (CH)-loaded wearable personalized 3D printed orthodontic retainers were studied for local sustained-release of drugs. CH powders were mixed with PEG 4000, Tween 80, poly(lactic acid), and polycaprolactone. The mixture was hot-melt extruded to form a filament that was 3D printed to a customizable original orthodontic retainer with the fused deposition modeling (FDM) method. The original retainer showed a burst release of CH in the early stage of the dissolution process though a sustained release appeared in the late stage. The in vivo burst release of CH would lead to unexpected side effect. The original retainer was modified by coating with hydrophilic polymers or washing with buffered solutions to obtain the coated or washed retainer. The coated retainer still showed a burst release while the washed retainer showed an optimal sustained release. Many CH microparticles existed on the surface of original retainers according to the scanning electron microscopic image so that the burst release was unavoidable. The hydrophilic polymer coating method did not change the release profile because the polymer was also rapidly dissolved. However, most of the surface CH can be eliminated by washing so that the burst release dissappeared in the washed retainer. Furthermore, the simulated CH concentration-time profiles in the circulation of humans of the washed retainer showed the stable and appropriate drug levels for more than 3 days. Wearable personalized 3D printed drug-loaded orthodontic retainers are a promising drug-device for sustained release of drugs.

Transdermal Cubic Phases of Metformin Hydrochloride: In Silico and in Vitro Studies of Delivery Mechanisms.

Transdermal delivery is one of important controlled drug release strategies for drug development. Cubic phases are the assemblies of amphiphilic molecules in water with the hydrophilic-hydrophobic interpenetrating network for transdermal delivery of both hydrophilic and hydrophobic drugs. However, many details about the transdermal delivery of drugs from cubic phases remain unclear. Here, metformin hydrochloride (Met) cubic phases were prepared with glyceryl monooleate (GMO), ethanol, and water. The cubic structure was identified with the polarizing light microscopy and small-angle X-ray scattering method. Dissipative particle dynamics (DPD) was used for building the microstructures of the cubic phases to explore the mechanism of drug release that mainly depended on drug diffusion from the water channels of cubic phases in accordance with the Higuchi equation of in vitro release experiments. The coarse-grained model and molecular docking method showed that GMO could enhance drug permeation through the skin by disturbing the interaction between Met and the skin proteins, and increasing the fluidity of skin lipids, which was confirmed with the Fourier transform infrared spectroscopy, Langmuir monolayer, and immunohistochemistry. Furthermore, in vitro permeation experiments showed the high Met transdermal improvement of cubic phases. Cubic phases are an ideal transdermal delivery system of Met. In silico methods are very useful for analyzing the molecular mechanisms of transdermal formulations.

MiRNA-192 [corrected] and miRNA-204 Directly Suppress lncRNA HOTTIP and Interrupt GLS1-Mediated Glutaminolysis in Hepatocellular Carcinoma.

Accumulated evidence demonstrated that long non-coding RNAs (lncRNAs) play a pivotal role in tumorigenesis. However, it is still largely unknown how these lncRNAs were regulated by small ncRNAs, such as microRNAs (miRNAs), at the post-transcriptional level. We here use lncRNA HOTTIP as an example to study how miRNAs impact lncRNAs expression and its biological significance in hepatocellular carcinoma (HCC). LncRNA HOTTIP is a vital oncogene in HCC, one of the deadliest cancers worldwide. In the current study, we identified miR-192 and miR-204 as two microRNAs (miRNAs) suppressing HOTTIP expression via the Argonaute 2 (AGO2)-mediated RNA interference (RNAi) pathway in HCC. Interaction between miR-192 or miR-204 and HOTTIP were further confirmed using dual luciferase reporter gene assays. Consistent with this notion, a significant negative correlation between these miRNAs and HOTTIP exists in HCC tissue specimens. Interestingly, the dysregulation of the three ncRNAs was associated with overall survival of HCC patients. In addition, the posttranscriptional silencing of HOTTIP by miR-192, miR-204 or HOTTIP siRNAs could significantly suppress viability of HCC cells. On the contrary, antagonizing endogenous miR-192 or miR-204 led to increased HOTTIP expression and stimulated cell proliferation. In vivo mouse xenograft model also support the tumor suppressor role of both miRNAs. Besides the known targets (multiple 5' end HOX A genes, i.e. HOXA13), glutaminase (GLS1) was identified as a potential downstream target of the miR-192/-204-HOTTIP axis in HCC. Considering glutaminolysis as a crucial hallmark of cancer cells and significantly inhibited cell viability after silencingGLS1, we speculate that the miR-192/-204-HOTTIP axis may interrupt HCC glutaminolysis through GLS1 inhibition. These results elucidate that the miR-192/-204-HOTTIP axis might be an important molecular pathway during hepatic cell tumorigenesis. Our data in clinical HCC samples highlight miR-192, miR-204 and HOTTIP with prognostic and potentially therapeutic implications.

Inhalable Andrographolide-ß-cyclodextrin Inclusion Complexes for Treatment of Staphylococcus aureus Pneumonia by Regulating Immune Responses.

Bacterial pneumonia is a serious disease with high mortality if no appropriate and immediate therapy is available. Andrographolide (AG) is an anti-inflammatory agent extracted from a traditional Chinese herb andrographis paniculata. Oral AG tablets and pills are clinically applied for treatment of upper respiratory tract infections. However, the low solubility and bioavailability of AG lead to high doses and long-term therapy. Here we developed an andrographolide-ß-cyclodextrin inclusion complex (AG-ß-CD) for inhalation therapy of Staphylococcus aureus pneumonia. AG-ß-CD was identified with X-ray diffraction and FT-IR. Surprisingly, both AG-ß-CD and AG showed little in vitro anti-S. aureus activity. However, pulmonary delivery of AG, AG-ß-CD, or penicillin had significant anti-S. aureus pneumonia effects. Leukocytes, neutrophils, white blood cells, total proteins, TNF-α, IL-6, NF-κB p65 expression, and bacterial colonies in the bronchoalveolar lavage fluids were detected. Pulmonary delivery of AG and AG-ß-CD led to bacterial inhibition and inflammation alleviation by regulating immune responses, while penicillin only killed bacteria without significant immune regulation. Moreover, the antipneumonia activity of AG-ß-CD was much higher than that of AG, probably resulting from locally accelerated AG dissolution due to ß-CD inclusion. The aerodynamic diameter of AG-ß-CD powders was 2.03 µm, suitable for pulmonary delivery. Inhalable AG-ß-CD is a promising antibacterial and anti-inflammatory medicine for the treatment of S. aureus pneumonia by regulating immune responses, and the effect is enhanced by ß-CD inclusion. AG and its formulations might be potent weapons against the resistant bacterial pneumonia due to their specific mechanism in the future.

[Preparation of liposomal artesunate dry powder inhalers and the effect on the acute lung injury of rats].

Artesunate is one of artemisinin derivatives with anti-malarial and anti-inflammatory activities though its water solubility and bioavailability are low. Acute lung injury (ALI) is a seriously dispersive lung disease with a high mortality. In this study, artesunate liposomes were prepared with the film dispersion method, and then lyophilized to obtain the liposomal artesunate dry powder inhalers(LADPIs). The LADPIs were pulmonary-delivered into the lung to treat ALI in rats. The artesunate liposomes had the capsulation efficiency of 71.4%, the particle size of 47.3 nm, and the zeta potential of -13.7 m V. The LADPIs had the aerodynamic particle size of 4.2 µm and the fine particle fraction (FPF) of 34.5%. ALI was established in rats by instilling lipopolysaccharide (LPS) into the lungs. The rats quickly showed a reduction in movement and acceleration in breath followed by diarrhea and so on. The LADPIs were directly administrated into the lungs of ALI rats through airways after 1 h of LPS challenge. The treatment induced a reduction in ALI syndromes. Two inflammatory factors, including TNF-α and IL-6, were significantly reduced by the artesunate powder in the LADPI group similarly to the reduction in the positive drug dexamethasone group (P < 0.05). Therefore, the anti-inflammatory effect of LADPIs contributed to the anti-ALI activity. Furthermore, the liposomal formulation improved drug bioavailability in the lung and increased therapeutic efficiency. The LADPIs are promising medicines for therapy of ALI through local drug administration.

[Ultrasonic microbubbles for glioma-targeted drug delivery].

Ultrasonic microbubbles were used to open blood-brain barriers (BBB) with a reversed and limited behavior feature in the study, which could improve the brain-targeted delivery of anti-tumor drugs. The glioma rat model was prepared. Low-frequency ultrasound was combined with microbubbles to affect the permeability of BBB compared with the permeability of independently administered Evans blue (EB) crossing BBB. Time point and length of ultrasound were investigated whether they affect the permeability of BBB and the damage of brain tissue. The effect of the growth time of glioma on BBB permeability was explored. Only glioma had a very little impact on BBB permeability. However, ultrasonic microbubbles opened the BBB with the features of temporary, limited and reversed behavior and improved EB and magnetic resonance imaging contrast agent penetrating BBB. A length of 30 s ultrasound is appropriate for opening BBB and no damage of brain tissue. Drugs should be injected before ultrasound so that they enter into brain as BBB opening. Ultrasonic microbubbles can open BBB effectively and safely, which improve drugs penetrating BBB under proper time point and length.

[Preparation, in vitro and in vivo evaluation of cataplasm of white mustard seed varnish to prevent asthma].

The aim of the manuscript was to optimize formulations and preparation technologies of cataplasm of white mustard seed varnish, and to evaluate its anti-asthma effect on rats. The single factor experiments included spreading thickness, types of crosslinking agents, dihydroxyaluminum aminoacetate amount, sodium polyacrylate amount, types of adhesive agents with human sense as the evaluation index. Blank cataplasm matrix was optimized by the orthogonal experiment with the amount of glycerine, citric acid, and sodium carboxymethylcellulose as the major influential factors. Initial adhesive force, peeling strength and human sense were as the evaluation index. The optimized formulation of blank cataplasm were as followings: glycerine-water-ethanol-PEG400-dihydroxyaluminum aminoacetate-citric acid-sodium carboxymethylcellulose-sodium carboxymethylcellulose 2 : 8 : 0.8 : 0.4 : 0.07: 0.15 : 0.1 : 0.5. The active ingredients of white mustard seed, corydalis, and gansui root were extracted by alcohol extraction method. Asiasarum volatile oil was extracted by oil extractor. The optimized drug loading amount was 11% with initial adhesive force, peeling strength and human sense as the evaluation index. Asthma rats model were established by sensitized with ovalbumin and nose-scratching time as the evaluation index. High dose (17%) group of drug-loaded cataplasm had the obvious inhibition effect on nose-scratching time of rats (P = 0.037 < 0.05). In comparison, middle dose (11%), low dose (4%) and positive-control groups had no obvious inhibitive effect on rats. White mustard seed cataplasm supplied a novel choice for anti-asthma therapy. And the overall pharmacodynamics assessment will be carried out on molecular level in near future.

Cancer cell membrane-coated bacterial ghosts for highly efficient paclitaxel delivery against metastatic lung cancer.

Chemotherapy is one of the major approaches for the treatment of metastatic lung cancer, although it is limited by the low tumor delivery efficacy of anticancer drugs. Bacterial therapy is emerging for cancer treatment due to its high immune stimulation effect; however, excessively generated immunogenicity will cause serious inflammatory response syndrome. Here, we prepared cancer cell membrane-coated liposomal paclitaxel-loaded bacterial ghosts (LP@BG@CCM) by layer-by-layer encapsulation for the treatment of metastatic lung cancer. The preparation processes were simple, only involving film formation, electroporation, and pore extrusion. LP@BG@CCM owned much higher 4T1 cancer cell toxicity than LP@BG due to its faster fusion with cancer cells. In the 4T1 breast cancer metastatic lung cancer mouse models, the remarkably higher lung targeting of intravenously injected LP@BG@CCM was observed with the almost normalized lung appearance, the reduced lung weight, the clear lung tissue structure, and the enhanced cancer cell apoptosis compared to its precursors. Moreover, several major immune factors were improved after administration of LP@BG@CCM, including the CD4+/CD8a+ T cells in the spleen and the TNF-α, IFN-γ, and IL-4 in the lung. LP@BG@CCM exhibits the optimal synergistic chemo-immunotherapy, which is a promising medication for the treatment of metastatic lung cancer.

3D printing of multi-unit gastro-retentive tablets for the pulsatile release of artesunate.

Pulsatile drug delivery is hardly achieved by conventional gastro-retentive dosage forms. Artesunate as a typical anti-malaria medicine needs oral pulsatile release. Here, artesunate-loaded pulsatile-release multi-unit gastro-retentive tablets (APGTs) were prepared with a semi-solid extrusion three-dimensional (3D) printing method. An APGT was composed of three units: artesunate-loaded immediate and delayed release units and a block unit. The matrix of the immediate/delayed release units consisted of polyvinylpyrrolidone (PVP) K30 and croscarmellose sodium, which improved the rapid release of artesunate when contacting water. The block unit consisted of octadecanol, hydroxypropyl methyl cellulose K15M, PVP K30, and poloxamer F68. APGTs showed multi-phase release in simulated gastric liquids (SGLs). The first immediate release phase continued for 1 h followed by a long block phase for 7 h. The second rapid release phase was initiated when the eroded holes in the block unit extended to the inner delayed release unit, and this phase continued for about 14 h. Low-density APGTs could ensure their long-term floating in the stomach. Oral APGTs remained in the rabbit stomach for about 20 h. 3D printing provides a new strategy for the preparation of oral pulsatile-release tablets.

Oral quercetin nanoparticles in hydrogel microspheres alleviate high-altitude sleep disturbance based on the gut-brain axis.

High-altitude sleep disturbance is a common symptom of acute mountain sickness, which can be alleviated via modulation of the gut-brain axis. Quercetin (Que) is used to modulate gut microbiota and serves as a potential drug to regulate the gut-brain axis, but the poor solubility and bioavailability affect its biological functions. Here, Que nanoparticles (QNPs) were prepared with zein using an antisolvent method, and QNP-loaded calcium alginate hydrogel microspheres (QNP@HMs) were prepared using electrospinning technology to improve the gastrointestinal stability and intestinal adhesion of QNPs. In the mouse model of high-altitude sleep disturbance, oral administration of QNP@HMs before the mice entering high altitude prolonged sleep duration, improved blood cell recovery, spontaneous behavior and short-term memory, and reduced such inflammation factors as TNF-α and iNOS. Moreover, QNP@HMs enhanced the abundance of probiotics in the gut, including Lactobacillus and Lachnospira, and reduced intestinal inflammation. However, in the mice after gut sterilization by long-term oral antibiotics, QNP@HMs showed no therapeutic effect. QNP@HMs are a promising medication for the prevention of high-altitude sleep disturbance based on the gut-brain axis.

Oral Curcumin-Thioketal-Inulin Conjugate Micelles against Radiation-Induced Enteritis.

Radiation-induced enteritis is an unavoidable complication associated with pelvic tumor radiotherapy, significantly influencing the prognosis of cancer patients. The limited availability of commercial gastrointestinal radioprotectors in clinical settings poses a substantial challenge in preventing radiation enteritis. Despite the inherent radioprotective characteristics of Cur in vitro, its poor solubility in water, instability, and low bioavailability lead to inferior therapeutic effects in vivo. Herein, we developed novel ROS-responsive micelles (CTI) from inulin and curcumin, aimed at mitigating radiation enteritis. CTI micelles had excellent solubility and stability. Importantly, CTI improved the cytotoxicity and bioavailability of curcumin, thereby showing enhanced effectiveness in neutralizing ROS induced by radiation, safeguarding against DNA damage, and reducing radiation-induced cellular mortality. Moreover, in a radiation enteritis mice model, CTI not only alleviated severe radiation-induced intestinal injury but also improved redox-related indicators and reduced inflammatory cytokine expression. Furthermore, CTI effectively increased gut microbiota abundance and maintained gut homeostasis. In conclusion, CTI could be a promising candidate for the clinical management of radiation enteritis. Our study provides a new perspective for radioprotection using natural antioxidants.

Highly Efficient Hemostatic Cross-Linked Polyacrylate Polymer Dressings for Immediate Hemostasis.

A traumatic hemorrhage is fatal due to the great loss of blood in a short period of time; however, there are a few biomaterials that can stop the bleeding quickly due to the limited water absorption speed. Here, a highly absorbent polymer (HPA), polyacrylate, was prepared as it has the best structure-effectiveness relationship. Within a very short period of time (2 min), HPA continually absorbed water until it swelled up to its 600 times its weight; more importantly, the porous structure comprised the swollen dressing. This instantaneous swelling immediately led to rapid hemostasis in irregular wounds. We optimized the HPA preparation process to obtain a rapidly water-absorbent polymer (i.e., HPA-5). HPA-5 showed favorable adhesion and biocompatibility in vitro. A rat femoral arteriovenous complete shear model and a tail arteriovenous injury model were established. HPA exhibited excellent hemostatic capability with little blood loss and short hemostatic time compared with CeloxTM in both of the models. The hemostatic mechanisms of HPA consist of fast clotting by aggregating blood cells, activating platelets, and accelerating the coagulation pathway via water absorption and electrostatic interaction. HPA is a promising highly water-absorbent hemostatic dressing for rapid and extensive blood clotting after vessel injury.

Effect of different drying methods on the structure and properties of porous starch.

In order to investigate the effects of different drying methods on the properties of porous starch. The present study used four drying methods, namely hot air drying (HD), spray drying (SPD), vacuum freeze drying (FD) and supercritical carbon dioxide drying (SCD) to prepare maize and kudzu porous starch. Findings indicated that the physicochemical properties (e.g., morphology, crystallinity, enthalpy value, porosity, surface area and water absorption capacity as well as dye absorption capacity, particle size) of porous starch were significantly affected by the drying method. Compared with other samples, SCD-treated porous starch exhibited the highest surface areas of the starch (2.943 and 3.139 m2/g corresponding to kudzu and maize, respectively), amylose content (22.02 % and 16.85 % corresponding to kudzu and maize, respectively), MB and NR absorption capacity (90.63 %, 100.26 % and 90.63 %, 100.26 %, corresponding to kudzu ad maize, respectively), and thermal stability, whereas HD-treated porous starch showed the highest water-absorption capacity (123.8 % and 131.31 % corresponding to kudzu and maize, respectively). The dye absorption of the maize and kudzu porous starch was positively correlated with surface area, according to Pearson's correlation analysis. Therefore, in this study, our aim was to explore the effects of different drying methods on the Structure and properties of porous starch, and provide reference for selecting the best drying method for its application in different fields.

Nanoengineered Red Blood Cells Loaded with TMPRSS2 and Cathepsin L Inhibitors Block SARS-CoV-2 Pseudovirus Entry into Lung ACE2+ Cells.

The enzymatic activities of Furin, Transmembrane serine proteinase 2 (TMPRSS2), Cathepsin L (CTSL), and Angiotensin-converting enzyme 2 (ACE2) receptor binding are necessary for the entry of coronaviruses into host cells. Precise inhibition of these key proteases in ACE2+ lung cells during a viral infection cycle shall prevent viral Spike (S) protein activation and its fusion with a host cell membrane, consequently averting virus entry to the cells. In this study, dual-drug-combined (TMPRSS2 inhibitor Camostat and CTSL inhibitor E-64d) nanocarriers (NCs) are constructed conjugated with an anti-human ACE2 (hACE2) antibody and employ Red Blood Cell (RBC)-hitchhiking, termed "Nanoengineered RBCs," for targeting lung cells. The significant therapeutic efficacy of the dual-drug-loaded nanoengineered RBCs in pseudovirus-infected K18-hACE2 transgenic mice is reported. Notably, the modular nanoengineered RBCs (anti-receptor antibody+NCs+RBCs) precisely target key proteases of host cells in the lungs to block the entry of Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), regardless of virus variations. These findings are anticipated to benefit the development of a series of novel and safe host-cell-protecting antiviral therapies.

A functionalized poly(amidoamine) nanocarrier-loading 5-fluorouracil: pH-responsive drug release and enhanced anticancer effect.

A functionalized poly(amidoamine) (PAMAM) nanocarrier was designed and prepared to deliver anticancer drugs. The nanocarrier is a copolymer with a core-shell structure with 3.0 G PAMAM as the core and sequentially conjugated poly(2-(N,N-diethylamino)ethyl methacrylate) (pDEA) and methoxy-poly(ethylene glycol) 2000 (mPEG) as the shell. The copolymer, PAMAM-pDEA-mPEG, was synthesized using atom transfer radical polymerization and click chemistry. The PAMAM core loaded drugs. pDEA had pH-sensitive properties, showing hydrophobicity in neutral environments and hydrophilicity in weakly acidic environments because of the presence of tertiary amines. Therefore, pDEA was a functional layer coating drugs in neutral environments and releasing drugs in acidic environments. The outer mPEG layer allowed the nanocarrier to circulate in the blood for a long period of time and improved the stability of the nanocarriers. The anticancer drug 5-fluorouracil (5-FU) was entrapped in the nanocarrier at high levels by changing the pH from 4.0 to 8.0. The drug release was also highly pH responsive, and the release rate was much higher at pH 6.5 than at pH 7.4, which favored drug release in the weakly acidic tumor environment. The blank nanocarrier was not toxic to cells or animals. The 5-FU-loaded nanocarrier exerted enhanced anticancer effects on tumor-bearing mice relative to 5-FU alone. PAMAM-pDEA-mPEG is a promising nanocarrier for the delivery of anticancer drugs.

Mesalazine hollow suppositories based on 3D printing for treatment of ulcerative colitis.

Mesalazine (MSZ) suppositories are a first-line medication for the localized treatment of ulcerative colitis (UC). However, the frequent defecation of patients with UC influences the retention of the suppository in the rectum and multiple doses have to be applied. Here, a mesalazine hollow suppository (MHS) is developed using three-dimensional (3D) printing. The MHS is composed of an inner supporting spring and an outer MSZ-loaded curved hollow shell. Springs were prepared using fused deposition modeling (FDM) 3D printing with thermoplastic urethane filaments, followed by splitting. The optimal parameters, including elasticity, filament diameter, spring inner diameter, and filament distance, were screened. The shell was prepared by FDM 3D printing utilizing MSZ, polyvinyl alcohol, and polyethylene glycol, which were assembled with springs to obtain FDM 3D-printed MHS (F-MHS); if 3D-printed metal molding was used in preparing shell, mold-formed MHS (M-MHS) was obtained. The F-MHS exhibited faster MSZ release than the M-MHS; therefore, the molding method is preferable. The inserted M-MHS was retained in the rat rectum for 5 h without affecting defecation. M-MHS alleviated tissue damage of UC rats and reduced inflammation with low levels of myeloperoxidase and proinflammatory cytokines. Personalized MHS is a promising medication for the localized treatment of UC.