RESUMO
Interest in unintended discrimination that can result from implicit attitudes and stereotypes (implicit biases) has stimulated many research investigations. Much of this research has used the Implicit Association Test (IAT) to measure association strengths that are presumed to underlie implicit biases. It had been more than a decade since the last published treatment of recommended best practices for research using IAT measures. After an initial draft by the first author, and continuing through three subsequent drafts, the 22 authors and 14 commenters contributed extensively to refining the selection and description of recommendation-worthy research practices. Individual judgments of agreement or disagreement were provided by 29 of the 36 authors and commenters. Of the 21 recommended practices for conducting research with IAT measures presented in this article, all but two were endorsed by 90% or more of those who felt knowledgeable enough to express agreement or disagreement; only 4% of the totality of judgments expressed disagreement. For two practices that were retained despite more than two judgments of disagreement (four for one, five for the other), the bases for those disagreements are described in presenting the recommendations. The article additionally provides recommendations for how to report procedures of IAT measures in empirical articles.
Assuntos
Associação , Atitude , HumanosRESUMO
BACKGROUND: The purpose of the study was to compare the histopathologic and immunophenotypic features of central centrifugal cicatricial alopecia (CCCA) and lichen planopilaris (LPP) to better characterize and differentiate these two clinical entities. CCCA remains an ill-defined and still-unsettled histologic entity and many hair loss experts regard CCCA to be histologically indistinguishable from LPP. Given the overlapping histologic features of these two lymphocyte-predominant cicatricial alopecias, and the lack of consensus regarding the significance of proposed distinctions, dermatopathologists face difficulty in providing clinicians and patients certainty with a definitive diagnosis of CCCA vs LPP. METHODS: We performed a retrospective review of 51 scalp biopsies of patients with either the clinical diagnosis of CCCA (27 cases) or LPP (24 cases). Clinical information, histologic features of hematoxylin-eosin-stained sections, and a panel of immunohistochemical markers were evaluated on scalp biopsies. Tested parameters were quantified, and statistical analysis was performed. RESULTS: Our study found no differences on either histologic assessment or immunophenotypic characterization between cases of classic LPP and CCCA. CONCLUSION: The conclusion of this study is that the inflammatory infiltrates in CCCA and LPP are not only histologically similar but also immunophenotypically indistinguishable.
Assuntos
Alopecia , Líquen Plano , Adulto , Idoso , Idoso de 80 Anos ou mais , Alopecia/imunologia , Alopecia/patologia , Feminino , Humanos , Líquen Plano/imunologia , Líquen Plano/patologia , Masculino , Pessoa de Meia-IdadeRESUMO
OBJECTIVE: We examine why people form positive first impressions of grandiose narcissists, even though they can identify others' narcissism. We test whether this occurs because narcissists are perceived to have especially high self-esteem, which is socially valued. METHOD: Across four studies, undergraduate perceivers viewed photographs of targets (for whom narcissism and self-esteem were known) and rated perceptions of their narcissism and self-esteem, as well as how much they liked them. RESULTS: Perceivers rated more narcissistic targets to be higher in self-esteem (even compared to targets with equally high self-esteem) and liked them more. Perceptions of self-esteem, moreover, mediated the effect of target narcissism on liking (Study 1). This effect disappeared when targets' narcissism was made salient, suggesting that trait narcissism is not inherently attractive (Study 2). Finally, path models revealed a negative effect of perceptions of narcissism on liking that was suppressed by a positive effect of perceptions of self-esteem on liking (Study 3a), even for ratings of people's online dating profiles (Study 3b). CONCLUSIONS: Positive initial impressions of narcissists may be driven by inflated perceptions that they have high self-esteem.
Assuntos
Narcisismo , Personalidade , Autoimagem , Percepção Social , Adulto , Feminino , Humanos , Masculino , Adulto JovemRESUMO
OBJECTIVE: Using the narcissistic admiration and rivalry concept (NARC) as a guiding framework, the current research examines how ingroup affiliation and devaluation are connected to the self-enhancing and self-threatening properties of ingroups for narcissists. METHOD: Participants (N = 374) completed a group decision-making task and received feedback that factorially manipulated both individual and group performance. Across the four combinations of performance feedback, we examined the conditional effects of narcissistic admiration and rivalry on social identity, perceptions of group member ability, desire to abandon the group, and desire to expel group members. RESULTS: Narcissistic admiration predicted higher levels of social identity in response to ingroup success, regardless of individual performance. In contrast, narcissistic rivalry predicted more negative views of group ability, as well as a higher desire to abandon the group and expel group members in response to individual success combined with ingroup failure. CONCLUSION: The results document and provide insight into narcissists' fickle attachment to ingroups. They provide evidence of the utility of the NARC in group contexts. Our findings suggest that narcissistic admiration is linked to self-enhancing group affiliation, whereas narcissistic rivalry is related to self-protective group distancing and devaluation.
Assuntos
Tomada de Decisões , Processos Grupais , Narcisismo , Autoimagem , Identificação Social , Adolescente , Adulto , Feminino , Humanos , Masculino , Adulto JovemRESUMO
Though grandiose narcissism has predominantly been studied in structural terms-focused on individuals' general tendencies to be more or less narcissistic-we tested whether it also has a meaningful process or state component. Using a daily diary study methodology and multilevel modeling (N = 178 undergraduates, 146 female; Mage = 18.86, SD = 2.21), we examine whether there is significant variability in daily state narcissism and whether this variability relates systematically to other psychological states (i.e., self-esteem, stress) and daily events. We assessed state narcissism and daily experiences over a 10-day period. We observed significant within-person variability in daily narcissism. Notably, this variability was not simply random error, as it related systematically to other psychological states and daily events. Specifically, state narcissism was higher when people experienced more positive agentic outcomes (e.g., having power over someone) or more positive communal outcomes (e.g., helping someone with a problem). State narcissism was lower on days people experienced greater felt stress. These relations held when state self-esteem, gender, and trait narcissism were controlled. These findings suggest that grandiose narcissism has a meaningful process or state component.
Assuntos
Narcisismo , Transtornos da Personalidade/psicologia , Personalidade/fisiologia , Autoimagem , Adolescente , Adulto , Feminino , Comportamento de Ajuda , Humanos , Controle Interno-Externo , Masculino , Poder Psicológico , Adulto JovemRESUMO
The Gp59 protein of bacteriophage T4 promotes DNA replication by loading the replicative helicase, Gp41, onto replication forks and recombination intermediates. Gp59 also blocks DNA synthesis by Gp43 polymerase until Gp41 is loaded, ensuring that synthesis is tightly coupled to unwinding. The distinct polymerase blocking and helicase loading activities of Gp59 likely involve different binding interactions with DNA and protein partners. Here, we investigate how interactions of Gp59 with DNA and Gp32, the T4 single-stranded DNA (ssDNA)-binding protein, are related to these activities. A previously characterized mutant, Gp59-I87A, exhibits markedly reduced affinity for ssDNA and pseudo-fork DNA substrates. We demonstrate that on Gp32-covered ssDNA, the DNA binding defect of Gp59-I87A is not detrimental to helicase loading and translocation. In contrast, on pseudo-fork DNA the I87A mutation is detrimental to helicase loading and unwinding in the presence or absence of Gp32. Other results indicate that Gp32 binding to lagging strand ssDNA relieves the blockage of Gp43 polymerase activity by Gp59, whereas the inhibition of Gp43 exonuclease activity is maintained. Our findings suggest that Gp59-Gp32 and Gp59-DNA interactions perform separate but complementary roles in T4 DNA metabolism; Gp59-Gp32 interactions are needed to load Gp41 onto D-loops, and other nucleoprotein structures containing clusters of Gp32. Gp59-DNA interactions are needed to load Gp41 onto nascent or collapsed replication forks lacking clusters of Gp32 and to coordinate bidirectional replication from T4 origins. The dual functionalities of Gp59 allow it to promote the initiation or re-start of DNA replication from a wide variety of recombination and replication intermediates.
Assuntos
Bacteriófago T4/enzimologia , DNA Helicases/metabolismo , Replicação do DNA/fisiologia , Proteínas de Ligação a DNA/metabolismo , Proteínas Virais/metabolismo , Bacteriófago T4/genética , Reparo do DNA/fisiologia , DNA de Cadeia Simples/genética , DNA de Cadeia Simples/metabolismo , Proteínas de Ligação a DNA/química , Proteínas de Ligação a DNA/genética , DNA Polimerase Dirigida por DNA/metabolismo , Mutagênese Sítio-Dirigida , Estrutura Quaternária de Proteína , Estrutura Terciária de Proteína , Recombinação Genética/fisiologia , Proteínas Virais/química , Proteínas Virais/genéticaRESUMO
The use of nutritional supplements to improve sporting performance and increase training adaptations is commonplace among athletes and is an expanding market in terms of product choice and availability. The purpose of this study was to examine the effects of 2 ergogenic aids with extracellular blood buffering potential, namely sodium bicarbonate (NaHCO3) and a lactate supplement, during a 40-km cycling time trial. Seven recreationally active men (age, 22.3 ± 3.3 years; height, 182.5 ± 6.5 cm; body mass, 79.2 ± 6.3 kg) completed five 40-km cycling time trials, including a familiarization trial in a randomized, blind, double placebo-controlled design. Subjects ingested (a) 300 mg·kg-1 body mass NaHCO3 (BICARB), (b) 45 mg·kg-1 body mass sodium chloride (PL-BICARB) as the placebo for the NaHCO3 trial, (c) 1115 mg lactate (LACTATE), or (d) plain flour as the placebo for the lactate trial (PL-LACTATE) 60 minutes before exercise. There was no significant difference in performance between the 4 conditions (p > 0.05). Although NaHCO3 ingestion induced significant changes in all the acid-base variables (all p < 0.05), no significant change was seen following lactate ingestion (p > 0.05). Subjects in the LACTATE condition did have a significantly higher heart rate (p < 0.05) without experiencing any greater perceived exertion (p > 0.05) than the other 3 conditions. Neither NaHCO3 nor lactate supplementation seem to improve 40-km cycling time trial performance. However, the potential benefits following LACTATE regarding perceived exertion require further research.
Assuntos
Desempenho Atlético/fisiologia , Ciclismo/fisiologia , Suplementos Nutricionais , Ácido Láctico/farmacologia , Bicarbonato de Sódio/farmacologia , Equilíbrio Ácido-Base/efeitos dos fármacos , Equilíbrio Ácido-Base/fisiologia , Adulto , Soluções Tampão , Método Duplo-Cego , Frequência Cardíaca/efeitos dos fármacos , Humanos , Concentração de Íons de Hidrogênio/efeitos dos fármacos , Ácido Láctico/sangue , Masculino , Esforço Físico/efeitos dos fármacos , Adulto JovemRESUMO
The combination of CO2-selective ionic liquids (ILs) with block copolymers, such as Pebax 1657, has demonstrated an enhancement of the gas separation capabilities of polymeric membranes. In the current work, the development of composite membranes by applying a thin, concentrated selective layer made of Pebax/imidazolium-based ionic liquids (ILs) is presented. The objective of the experiments was to determine the optimized IL loading and investigate how the alteration of the anion impacts the properties of the membranes. Two membrane configurations have been studied: coated flat sheet membranes, supported on a porous poly(ether sulfone) (PES) layer, as well as composite hollow fiber membranes, supported on commercial polypropylene (PP) hollow fibers. Coated hollow fiber composites were fabricated using a continuous coating method, offering a straightforward scalability in the manufacturing process. The determined mechanical pressure stability of hollow fiber composites reached up to 5 bar, indicating their potential for various industrial gas separation applications. It was found that the Pebax 1657-based coating containing 40 wt % [C6mim][NTf2] yielded membranes with the best gas separation properties, for both the coated flat sheet and the hollow fiber configurations. The CO2 permeance of hollow fibers reached 23.29 GPU, whereas the CO2/N2 ideal selectivity stood at 8.7, suggesting the necessity of the further enhancement of the coating technique, which can be achieved, for example, through application of multiple coatings. Nonetheless, the superior ideal selectivity of the CO2/CO separation, reaching 12.44, gave a promising outlook for further novel membrane applications, which involve the separation of the aforementioned gases.
RESUMO
The desire for social status is theorized as being central to narcissism; however, research to date has focused exclusively on grandiose narcissism. We examined how desires for, and perceived attainment of, status and inclusion relate to grandiose narcissism, vulnerable narcissism, and three-factor models of narcissism. Two studies (total N = 676) found that all expressions of narcissism relate to a stronger desire for status. Within three-factor models, this relation was not due solely to variance shared by grandiose and vulnerable narcissism, but also to phenotype-specific components. Grandiose narcissism was also strongly associated with perceived attainment of status, but not desire for or perceived attainment of inclusion, whereas vulnerable narcissism was strongly associated with desire for inclusion, but not perceived attainment of status or inclusion. Three-factor models of narcissism revealed comparable results. The findings delineate the social and motivational profiles of different expressions of narcissism, helping to illuminate narcissism's fundamental character.
Assuntos
Motivação , Narcisismo , Humanos , Fenótipo , Status SocialRESUMO
Gas permeation and pervaporation are technologies that emerged several decades ago. Even though they have discovered increasing popularity for industrial separation processes, they are not represented equally within process simulation tools except for commercial systems. The availability of such a numerical solution shall be extended due to the design of a membrane model with Visual Basic based on the solution-diffusion model. Although this works approach is presented for a specific process simulator application, the algorithm can generally be transferred to any other programming language and process simulation solver, which allows custom implementations or modeling. Furthermore, the modular design of the model enables its further development by operators through the integration of physical effects. A comparison with experimental data of gas permeation and pervaporation applications as well as other published simulation data delivers either good accordance with the results or negligible deviations of less than 1% from other data.
RESUMO
Lactic acid (LA) is an organic acid produced by fermentation or chemical synthesis. It plays a crucial role in the pharmaceutical, food and plastic industries. In the fermentation of, for example, grass silage, LA and different compounds are produced. To purify lactic acid, researchers have tried to investigate membrane technology to achieve a high yield of lactic acid permeance. This study tested four commercially available nanofiltration membranes (NF270, MPF-36, Toray NF, and Alfa Laval NF). Nanofiltration experiments were performed to investigate the rejection levels of lactic acid from a binary solution by using distinct molecular weight cut off membranes. All of the experiments were conducted with a lab-scale cross-flow membrane unit. Different operating conditions (pH, temperature) were studied for each membrane; the optimal process condition was found at 25 °C and pH 2.8. With higher temperatures and pH, an increase in LA rejection was observed. The MPF-36 membrane shows the lowest lactic acid rejection yield of 7%, while NF270 has the highest rejection yield of 71% at 25 °C and pH 2.8. These results will be helpful in the future to understand both the interaction of lactic acid permeance through nanofiltration membranes and process scale-up.
RESUMO
Titanium-pillared clay (Ti-PILC), as one of the most suitable types of porous adsorbents/(photo)catalysts, was prepared from a local type of Iranian clay and titanium isopropoxide. The production process was optimized by changing three operating parameters, including the clay suspension concentration (in the range of 0.5-10% w/v), the H+/Ti ratio (2-8 mol/mol), and the calcination temperature (300-700 °C). The largest specific surface area for the Ti-PILC was about 164 m2/g under the clay suspension of 0.5% w/v, H+/Ti = 6, with a surface area 273% larger than that of the raw clay. The surface areas obtained from more concentrated clay suspensions were, however, comparable (159 m2/g for 3% w/v clay and H+/Ti = 4). An increase in the calcination temperature has a negative effect on the porous texture of Ti-PILC, but based on modeling with artificial neural networks, its contribution was only 7%. Clay suspension and H+/Ti ratio play a role of 56 and 37% of the specific surface area. The presence of rutile phase, and in some cases anatase phase of TiO2 crystals was detected. FTIR and SEM investigations of Ti-PILCs produced under different operating parameters were analyzed.
RESUMO
Slow pyrolysis of biomass is commonly performed in rotary kilns. The effect of the particle residence time distribution on biomass conversion is often neglected when numerically modeling such systems. But this effect might be significant under certain conditions. The data presented here are results of numerical simulation of the biomass pyrolysis in rotary kilns under numerous operating conditions and levels of axial dispersion of biomass particles. The varied operating conditions are the kiln diameter ( D = 0.1 -1 m), the ratio of particle to kiln diameter ( d / D = 5 × 10 - 3 - 40 × 10 - 3 ), the ratio of kiln length to kiln diameter ( L / D = 1 -10), the kiln's inclination angle ( ß = 0.1 -8 ∘ ), the Froude number ( Fr = 10 - 3 - 10 - 2 ), the rotational Reynolds number ( Re = 10 2 - 16 × 10 3 ), and the Péclet number ( Pe = 5 -100). Data of 13,851 single case simulations are provided with this article. This includes the mean particle residence time, gas, bed and kiln wall temperatures, solid and gaseous species mass flows, heat fluxes, and the solid bed height over the kiln length. These comprehensive data have the potential to help in modeling, design, analysis, and optimization of rotary kilns used for the pyrolysis of biomass. The main characterization and interpretation is presented in the related main research paper by Pichler et al. (2021)[1].
RESUMO
A series of porous clay samples prepared at different pretreatment temperatures have been tested in a diffusion chamber. Diffusivity and permeability were examined in a temperature range from ambient to 900 °C. Gaseous mixtures of O2, CO2, and N2 have been applied, as these species are the relevant gases in the context of clay brick firing and similar thermochemical processes. Diffusive transport characteristics have been determined by means of the mean transport-pore model, and permeability has been evaluated by Darcy's law. CO2 diffusivity increased strongly with temperature, whereas O2 diffusion was limited to a certain level. It is proposed that one should consider CO2 surface diffusion in order to explain this phenomenon. The diffusion model was expanded and surface diffusion was included in the model equation. The results of the model fit reflected the important role of incorporated carbonates of the clay foundation in gas-phase (molecular or Knudsen) diffusivity. CO2 surface diffusion was observed to exhibit similar coefficients for two different investigated clays, and is therefore indicated as a property of natural clays. Permeability showed a progressive rise with temperature, in line with related literature.
RESUMO
CO2 removal via membrane oxygenators has become an important and reliable clinical technique. Nevertheless, oxygenators must be further optimized to increase CO2 removal performance and to reduce severe side effects. Here, in vitro tests with water can significantly reduce costs and effort during development. However, they must be able to reasonably represent the CO2 removal performance observed with blood. In this study, the deviation between the CO2 removal rate determined in vivo with porcine blood from that determined in vitro with water is quantified. The magnitude of this deviation (approx. 10%) is consistent with results reported in the literature. To better understand the remaining difference in CO2 removal rate and in order to assess the application limits of in vitro water tests, CFD simulations were conducted. They allow to quantify and investigate the influences of the differing fluid properties of blood and water on the CO2 removal rate. The CFD results indicate that the main CO2 transport resistance, the diffusional boundary layer, behaves generally differently in blood and water. Hence, studies of the CO2 boundary layer should be preferably conducted with blood. In contrast, water tests can be considered suitable for reliable determination of the total CO2 removal performance of oxygenators.
RESUMO
CO2 removal via membrane oxygenators during lung protective ventilation has become a reliable clinical technique. For further optimization of oxygenators, accurate prediction of the CO2 removal rate is necessary. It can either be determined by measuring the CO2 content in the exhaust gas of the oxygenator (sweep flow-based) or using blood gas analyzer data and a CO2 solubility model (blood-based). In this study, we determined the CO2 removal rate of a prototype oxygenator utilizing both methods in in vitro trials with bovine and in vivo trials with porcine blood. While the sweep flow-based method is reliably accurate, the blood-based method depends on the accuracy of the solubility model. In this work, we quantified performances of four different solubility models by calculating the deviation of the CO2 removal rates determined by both methods. Obtained data suggest that the simplest model (Loeppky) performs better than the more complex ones (May, Siggaard-Anderson, and Zierenberg). The models of May, Siggaard-Anderson, and Zierenberg show a significantly better performance for in vitro bovine blood data than for in vivo porcine blood data. Furthermore, the suitability of the Loeppky model parameters for bovine blood (in vitro) and porcine blood (in vivo) is evaluated.
RESUMO
Extracorporeal membrane oxygenators are essential medical devices for the treatment of patients with respiratory failure. A promising approach to improve oxygenator performance is the use of microstructured hollow fiber membranes that increase the available gas exchange surface area. However, by altering the traditional circular fiber shape, the risk of low flow, stagnating zones that obstruct mass transfer and encourage thrombus formation, may increase. Finding an optimal fiber shape is therefore a significant task. In this study, experimentally validated computational fluid dynamics simulations were used to investigate transverse flow within fiber packings of circular and microstructured fiber geometries. A numerical model was applied to calculate the local Sherwood number on the membrane surface, allowing for qualitative comparison of gas exchange capacities in low-velocity areas caused by the microstructured geometries. These adverse flow structures lead to a tradeoff between increased surface area and mass transfer. Based on our simulations, we suggest an optimal fiber shape for further investigations that increases potential mass transfer by up to 48% in comparison to the traditional, circular hollow fiber shape.
RESUMO
Physiological-relevant in vitro tissue models with their promise of better predictability have the potential to improve drug screening outcomes in preclinical studies. Despite the advances of spheroid models in pharmaceutical screening applications, variations in spheroid size and consequential altered cell responses often lead to nonreproducible and unpredictable results. Here, a microfluidic multisize spheroid array is established and characterized using liver, lung, colon, and skin cells as well as a triple-culture model of the blood-brain barrier (BBB) to assess the effects of spheroid size on (a) anticancer drug toxicity and (b) compound penetration across an advanced BBB model. The reproducible on-chip generation of 360 spheroids of five dimensions on a well-plate format using an integrated microlens technology is demonstrated. While spheroid size-related IC50 values vary up to 160% using the anticancer drugs cisplatin (CIS) or doxorubicin (DOX), reduced CIS:DOX drug dose combinations eliminate all lung microtumors independent of their sizes. A further application includes optimizing cell seeding ratios and size-dependent compound uptake studies in a perfused BBB model. Generally, smaller BBB-spheroids reveal an 80% higher compound penetration than larger spheroids while verifying the BBB opening effect of mannitol and a spheroid size-related modulation on paracellular transport properties.