Electric Field-Induced Sequential Prototropic Tautomerism in Enzyme-like Nanopocket Created by Single Molecular Break Junction.

Mastering the control of external stimuli-induced chemical transformations with detailed insights into the mechanistic pathway is the key for developing efficient synthetic strategies and designing functional molecular systems. Enzymes, the most potent biological catalysts, efficiently utilize their built-in electric field to catalyze and control complex chemical reactions within the active site. Herein, we have demonstrated the interfacial electric field-induced prototropic tautomerization reaction in acylhydrazone entities by creating an enzymatic-like nanopocket within the atomically sharp gold electrodes using a mechanically controlled break junction (MCBJ) technique. In addition to that, the molecular system used here contains two coupled acylhydrazone reaction centers, hence demonstrating a cooperative stepwise electric field-induced reaction realized at the single molecular level. Furthermore, the mechanistic studies revealed a proton relay-assisted tautomerization showing the importance of external factors such as solvent in such electric field-driven reactions. Finally, single-molecule charge transport and energetics calculations of different molecular species at various applied electric fields using a polarizable continuum solvent model confirm and support our experimental findings. Thus, this study demonstrates that mimicking an enzymatic pocket using a single molecular junction's interfacial electric field as a trigger for chemical reactions can open new avenues to the field of synthetic chemistry.

Extraordinary Electrical Conductance through Amorphous Nonconducting Polymers under Vibrational Strong Coupling.

Enhancing the electrical conductance through amorphous nondoped polymers is challenging. Here, we show that vibrational strong coupling (VSC) of intrinsically nonconducting and amorphous polymers such as polystyrene, deuterated polystyrene, and poly(benzyl methacrylate) to the vacuum electromagnetic field of the cavity enhances the electrical conductivity by at least 6 orders of magnitude compared to the uncoupled polymers. Remarkably, the observed extraordinary conductance is vibrational mode selective and occurs only under the VSC of the aromatic C-H(D) out-of-plane bending modes of the polymers. The conductance is thermally activated at the onset of strong coupling and becomes temperature-independent as the collective strong coupling strength increases. The electrical characterizations are performed without external light excitation, demonstrating the role of vacuum electromagnetic field-matter strong coupling in enhancing long-range transport even in amorphous nonconducting polymers.

Chemistry of the Au-Thiol Interface through the Lens of Single-Molecule Flicker Noise Measurements.

Chemistry of the Au-S interface at the nanoscale is one of the most complex systems to study, as the nature and strength of the Au-S bond change under different experimental conditions. In this study, using mechanically controlled break junction technique, we probed the conductance and analyzed Flicker noise for several aliphatic and aromatic thiol derivatives and thioethers. We demonstrate that Flicker noise can be used to unambiguously differentiate between stronger chemisorption (Au-SR) and weaker physisorption (Au-SRR') type interactions. The Flicker noise measurements indicate that the gold rearrangement in chemisorbed Au-SR junctions resembles that of the Au rearrangement in pure Au-Au metal contact breaking, which is independent of the molecular backbone structure and the resulting conductance. In contrast, thioethers showed the formation of a weaker physisorbed Au-SRR' type bond, and the Flicker noise measurement indicates the changes in the Au-anchoring group interface but not the Au-Au rearrangement like that in the Au-SR case. Additionally, by employing single-molecular conductance and Flicker noise analysis, we have probed the interfacial electric field-catalyzed ring-opening reaction of cyclic thioether under mild environmental conditions, which otherwise requires harsh chemical conditions for cleavage of the C-S bond. All of our conductance measurements are complemented by NEGF transport calculations. This study illustrates that the single-molecule conductance, together with the Flicker noise measurements can be used to tune and monitor chemical reactions at the single-molecule level.

Dithienylethene-Based Single Molecular Photothermal Linear Actuator.

By employing a mechanically controllable break junction technique, we have realized an ideal single molecular linear actuator based on dithienylethene (DTE) based molecular architecture, which undergoes reversible photothermal isomerization when subjected to UV irradiation under ambient conditions. As a result, open form (compressed, UV OFF) and closed form (elongated, UV ON) of dithienylethene-based molecular junctions are achieved. Interestingly, the mechanical actuation is achieved without changing the conductance of the molecular junction around the Fermi level over several cycles, which is an essential property required for an ideal single molecular actuator. Our study demonstrates a unique example of achieving a perfect balance between tunneling width and barrier height change upon photothermal isomerization, resulting in no change in conductance but a change in the molecular length, which results in mechanical actuation at the single molecular level.

Quantum Circuit Rules for Molecular Electronic Systems: Where Are We Headed Based on the Current Understanding of Quantum Interference, Thermoelectric, and Molecular Spintronics Phenomena?

In this minireview, we discuss important aspects of the various quantum phenomena (such as quantum interference, spin-dependent charge transport, and thermoelectric effects) relevant in single-molecule charge transport and list some of the basic circuit rules devised for different molecular systems. These quantum phenomena, in conjunction with the existing empirical circuit rules, can help in predicting some of the structure-property relationships in molecular circuits. However, a universal circuit law that predicts the charge transport properties of a molecular circuit has not been derived yet. Having such law(s) will help to design and build a complex molecular device leading to exciting unique applications that are not possible with the traditional silicon-based technologies. Based on the existing knowledge in the literature, here we open the discussion on the possible future research directions for deriving unified circuit law(s) to predict the charge transport in complex single-molecule circuits.

Synthesis and Single-Molecule Conductance Study of Redox-Active Ruthenium Complexes with Pyridyl and Dihydrobenzo[b]thiophene Anchoring Groups.

The ancillary ligands 4'-(4-pyridyl)-2,2':6',2''-terpyridine and 4'-(2,3-dihydrobenzo[b]thiophene)-2,2'-6',2"-terpyridine were used to synthesize two series of mono- and dinuclear ruthenium complexes differing in their lengths and anchoring groups. The electrochemical and single-molecular conductance properties of these two series of ruthenium complexes were studied experimentally by means of cyclic voltammetry and the scanning tunneling microscopy-break junction technique (STM-BJ) and theoretically by means of density functional theory (DFT). Cyclic voltammetry data showed clear redox peaks corresponding to both the metal- and ligand-related redox reactions. Single-molecular conductance demonstrated an exponential decay of the molecular conductance with the increase in molecular length for both the series of ruthenium complexes, with decay constants of ßPY =2.07±0.1 nm(-1) and ßBT =2.16±0.1 nm(-1) , respectively. The contact resistance of complexes with 2,3-dihydrobenzo[b]thiophene (BT) anchoring groups is found to be smaller than the contact resistance of ruthenium complexes with pyridine (PY) anchors. DFT calculations support the experimental results and provided additional information on the electronic structure and charge transport properties in those metal|ruthenium complex|metal junctions.

Electrochemical CO2 Reduction - A Critical View on Fundamentals, Materials and Applications.

The electrochemical reduction of CO(2) has been extensively studied over the past decades. Nevertheless, this topic has been tackled so far only by using a very fundamental approach and mostly by trying to improve kinetics and selectivities toward specific products in half-cell configurations and liquid-based electrolytes. The main drawback of this approach is that, due to the low solubility of CO(2) in water, the maximum CO(2) reduction current which could be drawn falls in the range of 0.01-0.02 A cm(-2). This is at least an order of magnitude lower current density than the requirement to make CO(2)-electrolysis a technically and economically feasible option for transformation of CO(2) into chemical feedstock or fuel thereby closing the CO(2) cycle. This work attempts to give a short overview on the status of electrochemical CO(2) reduction with respect to challenges at the electrolysis cell as well as at the catalyst level. We will critically discuss possible pathways to increase both operating current density and conversion efficiency in order to close the gap with established energy conversion technologies.

Electrochemical control of single-molecule conductance by Fermi-level tuning and conjugation switching.

Controlling charge transport through a single molecule connected to metallic electrodes remains one of the most fundamental challenges of nanoelectronics. Here we use electrochemical gating to reversibly tune the conductance of two different organic molecules, both containing anthraquinone (AQ) centers, over >1 order of magnitude. For electrode potentials outside the redox-active region, the effect of the gate is simply to shift the molecular energy levels relative to the metal Fermi level. At the redox potential, the conductance changes abruptly as the AQ unit is oxidized/reduced with an accompanying change in the conjugation pattern between linear and cross conjugation. The most significant change in conductance is observed when the electron pathway connecting the two electrodes is via the AQ unit. This is consistent with the expected occurrence of destructive quantum interference in that case. The experimental results are supported by an excellent agreement with ab initio transport calculations.

Promising anchoring groups for single-molecule conductance measurements.

The understanding of the charge transport through single molecule junctions is a prerequisite for the design and building of electronic circuits based on single molecule junctions. However, reliable and robust formation of such junctions is a challenging task to achieve. In this topical review, we present a systematic investigation of the anchoring group effect on single molecule junction conductance by employing two complementary techniques, namely scanning tunneling microscopy break junction (STM-BJ) and mechanically controllable break junction (MCBJ) techniques, based on the studies published in the literature and important results from our own work. We compared conductance studies for conventional anchoring groups described earlier with the molecular junctions formed through π-interactions with the electrode surface (Au, Pt, Ag) and we also summarized recent developments in the formation of highly conducting covalent Au-C σ-bonds using oligophenyleneethynylene (OPE) and an alkane molecular backbone. Specifically, we focus on the electron transport properties of diaryloligoyne, oligophenyleneethynylene (OPE) and/or alkane molecular junctions composed of several traditional anchoring groups, (dihydrobenzo[b]thiophene (BT), 5-benzothienyl analogue (BTh), thiol (SH), pyridyl (PY), amine (NH2), cyano (CN), methyl sulphide (SMe), nitro (NO2)) and other anchoring groups at the solid/liquid interface. The qualitative and quantitative comparison of the results obtained with different anchoring groups reveals structural and mechanistic details of the different types of single molecular junctions. The results reported in this prospective may serve as a guideline for the design and synthesis of molecular systems to be used in molecule-based electronic devices.

Making the Most of Nothing: One-Class Classification for Single-Molecule Transport Studies.

Single-molecule experiments offer a unique means to probe molecular properties of individual molecules-yet they rest upon the successful control of background noise and irrelevant signals. In single-molecule transport studies, large amounts of data that probe a wide range of physical and chemical behaviors are often generated. However, due to the stochasticity of these experiments, a substantial fraction of the data may consist of blank traces where no molecular signal is evident. One-class (OC) classification is a machine learning technique to identify a specific class in a data set that potentially consists of a wide variety of classes. Here, we examine the utility of two different types of OC classification models on four diverse data sets from three different laboratories. Two of these data sets were measured at cryogenic temperatures and two at room temperature. By training the models solely on traces from a blank experiment, we demonstrate the efficacy of OC classification as a powerful and reliable method for filtering out blank traces from a molecular experiment in all four data sets. On a labeled 4,4'-bipyridine data set measured at 4.2 K, we achieve an accuracy of 96.9 ± 0.3 and an area under the receiver operating characteristic curve of 99.5 ± 0.3 as validated over a fivefold cross-validation. Given the wide range of physical and chemical properties that can be probed in single-molecule experiments, the successful application of OC classification to filter out blank traces is a major step forward in our ability to understand and manipulate molecular properties.

Charge transport in photoswitchable dimethyldihydropyrene-type single-molecule junctions.

The conductance properties of a photoswitchable dimethyldihydropyrene (DHP) derivative have been investigated for the first time in single-molecule junctions using the mechanically controllable break junction technique. We demonstrate that the reversible structure changes induced by isomerization of a single bispyridine-substituted DHP molecule are correlated with a large drop of the conductance value. We found a very high ON/OFF ratio (>10(4)) and an excellent reversibility of conductance switching.

Single-molecule conductance of functionalized oligoynes: length dependence and junction evolution.

We report a combined experimental and theoretical investigation of the length dependence and anchor group dependence of the electrical conductance of a series of oligoyne molecular wires in single-molecule junctions with gold contacts. Experimentally, we focus on the synthesis and properties of diaryloligoynes with n = 1, 2, and 4 triple bonds and the anchor dihydrobenzo[b]thiophene (BT). For comparison, we also explored the aurophilic anchor group cyano (CN), amino (NH2), thiol (SH), and 4-pyridyl (PY). Scanning tunneling microscopy break junction (STM-BJ) and mechanically controllable break junction (MCBJ) techniques are employed to investigate single-molecule conductance characteristics. The BT moiety is superior as compared to traditional anchoring groups investigated so far. BT-terminated oligoynes display a 100% probability of junction formation and possess conductance values which are the highest of the oligoynes studied and, moreover, are higher than other conjugated molecular wires of similar length. Density functional theory (DFT)-based calculations are reported for oligoynes with n = 1-4 triple bonds. Complete conductance traces and conductance distributions are computed for each family of molecules. The sliding of the anchor groups leads to oscillations in both the electrical conductance and the binding energies of the studied molecular wires. In agreement with experimental results, BT-terminated oligoynes are predicted to have a high electrical conductance. The experimental attenuation constants ßH range between 1.7 nm(-1) (CN) and 3.2 nm(-1) (SH) and show the following trend: ßH(CN) < ßH(NH2) < ßH(BT) < ßH(PY) ≈ ßH(SH). DFT-based calculations yield lower values, which range between 0.4 nm(-1) (CN) and 2.2 nm(-1) (PY).

Do quantum interference effects manifest in acyclic aliphatic molecules with anchoring groups?

The ability to control single molecule electronic conductance is imperative for achieving functional molecular electronics applications such as insulation, switching, and energy conversion. Quantum interference (QI) effects are generally used to control electronic transmission through single molecular junctions by tuning the molecular structure or the position of the anchoring group(s) in the molecule. While previous studies focussed on the QI between σ and/or π channels of the molecular backbone, here, we show that single molecule electronic devices can be designed based on QI effects originating from the interactions of anchoring groups. Furthermore, while previous studies have concentrated on the QI mostly in conjugated/cyclic systems, our study showcases that QI effects can be harnessed even in the simplest acyclic aliphatic systems-alkanedithiols, alkanediamines, and alkanediselenols. We identify band gap state resonances in the transmission spectrum of these molecules whose positions and intensities depend on the chain length, and anchoring group sensitive QI between the nearly degenerate molecular orbitals localized on the anchoring groups. We predict that these QI features can be harnessed through an external mechanical stimulus to tune the charge transport properties of single molecules in the break-junction experiments.

Trimethylsilyl-terminated oligo(phenylene ethynylene)s: an approach to single-molecule junctions with covalent Au-C σ-bonds.

A new and efficient approach using cleaving of trimethylsilyl groups to create covalent Au-C anchoring sites has been developed for single-molecule junction conductance measurements. Employing the mechanically controllable break junction (MCBJ) technique in liquid, we demonstrate the formation of highly conducting single molecular junctions of several OPE derivatives. The created junctions are mechanically stable and exhibit conductances around one order of magnitude higher than those of their dithiol analogues. Extended assembly and reaction times lead to oligomerization. Combined STM imaging and gap-mode Raman experiments provide structure evidence to support the formation of covalent Au-C contacts and further oligomerization.

Correlations between molecular structure and single-junction conductance: a case study with oligo(phenylene-ethynylene)-type wires.

The charge transport characteristics of 11 tailor-made dithiol-terminated oligo(phenylene-ethynylene) (OPE)-type molecules attached to two gold electrodes were studied at a solid/liquid interface in a combined approach using an STM break junction (STM-BJ) and a mechanically controlled break junction (MCBJ) setup. We designed and characterized 11 structurally distinct dithiol-terminated OPE-type molecules with varied length and HOMO/LUMO energy. Increase of the molecular length and/or of the HOMO-LUMO gap leads to a decrease of the single-junction conductance of the linearly conjugate acenes. The experimental data and simulations suggest a nonresonant tunneling mechanism involving hole transport through the molecular HOMO, with a decay constant ß = 3.4 ± 0.1 nm(-1) and a contact resistance R(c) = 40 kΩ per Au-S bond. The introduction of a cross-conjugated anthraquinone or a dihydroanthracene central unit results in lower conductance values, which are attributed to a destructive quantum interference phenomenon for the former and a broken π-conjugation for the latter. The statistical analysis of conductance-distance and current-voltage traces revealed details of evolution and breaking of molecular junctions. In particular, we explored the effect of stretching rate and junction stability. We compare our experimental results with DFT calculations using the ab initio code SMEAGOL and discuss how the structure of the molecular wires affects the conductance values.

Fine-tuning the DNA conductance by intercalation of drug molecules.

In this work we study the structure-transport property relationships of small ligand intercalated DNA molecules using a multiscale modeling approach where extensive ab initio calculations are performed on numerous MD-simulated configurations of dsDNA and dsDNA intercalated with two different intercalators, ethidium and daunomycin. DNA conductance is found to increase by one order of magnitude upon drug intercalation due to the local unwinding of the DNA base pairs adjacent to the intercalated sites, which leads to modifications of the density of states in the near-Fermi-energy region of the ligand-DNA complex. Our study suggests that the intercalators can be used to enhance or tune the DNA conductance, which opens new possibilities for their potential applications in nanoelectronics.

Humidity-controlled rectification switching in ruthenium-complex molecular junctions.

Although molecular rectifiers were proposed over four decades ago 1,2 , until recently reported rectification ratios (RR) were rather moderate 2-11 (RR ~ 101). This ceiling was convincingly broken using a eutectic GaIn top contact 12 to probe molecular monolayers of coupled ferrocene groups (RR ~ 105), as well as using scanning tunnelling microscopy-break junctions 13-16 and mechanically controlled break junctions 17 to probe single molecules (RR ~ 102-103). Here, we demonstrate a device based on a molecular monolayer in which the RR can be switched by more than three orders of magnitude (between RR ~ 100 and RR ≥ 103) in response to humidity. As the relative humidity is toggled between 5% and 60%, the current-voltage (I-V) characteristics of a monolayer of di-nuclear Ru-complex molecules reversibly change from symmetric to strongly asymmetric (diode-like). Key to this behaviour is the presence of two localized molecular orbitals in series, which are nearly degenerate in dry circumstances but become misaligned under high humidity conditions, due to the displacement of counter ions (PF6-). This asymmetric gating of the two relevant localized molecular orbital levels results in humidity-controlled diode-like behaviour.

Stable anchoring chemistry for room temperature charge transport through graphite-molecule contacts.

An open challenge for single-molecule electronics is to find stable contacts at room temperature with a well-defined conductance. Common coinage metal electrodes pose fabrication and operational problems due to the high mobility of the surface atoms. We demonstrate how molecules covalently grafted onto mechanically robust graphite/graphene substrates overcome these limitations. To this aim, we explore the effect of the anchoring group chemistry on the charge transport properties of graphite-molecule contacts by means of the scanning tunneling microscopy break-junction technique and ab initio simulations. Molecules adsorbed on graphite only via van der Waals interactions have a conductance that decreases exponentially upon stretching the junctions, whereas the molecules bonded covalently to graphite have a single well-defined conductance and yield contacts of unprecedented stability at room temperature. Our results demonstrate a strong bias dependence of the single-molecule conductance, which varies over more than one order of magnitude even at low bias voltages, and show an opposite rectification behavior for covalent and noncovalent contacts. We demonstrate that this bias-dependent conductance and opposite rectification behavior is due to a novel effect caused by the nonconstant, highly dispersive density of states of graphite around the Fermi energy and that the direction of rectification is governed by the detailed nature of the molecule/graphite contact. Combined with the prospect of new functionalities due to a strongly bias-dependent conductance, these covalent contacts are ideal candidates for next-generation molecular electronic devices.

Conductance in a bis-terpyridine based single molecular breadboard circuit.

Controlling charge flow in single molecule circuits with multiple electrical contacts and conductance pathways is a much sought after goal in molecular electronics. In this joint experimental and theoretical study, we advance the possibility of creating single molecule breadboard circuits through an analysis of the conductance of a bis-terpyridine based molecule (TP1). The TP1 molecule can adopt multiple conformations through relative rotations of 7 aromatic rings and can attach to electrodes in 61 possible single and multi-terminal configurations through 6 pyridyl groups. Despite this complexity, we show that it is possible to extract well defined conductance features for the TP1 breadboard and assign them rigorously to the underlying constituent circuits. Mechanically controllable break-junction (MCBJ) experiments on the TP1 molecular breadboard show an unprecedented 4 conductance states spanning a range 10 -2G0 to 10 -7G0. Quantitative theoretical examination of the conductance of TP1 reveals that combinations of 5 types of single terminal 2-5 ring subcircuits are accessed as a function of electrode separation to produce the distinct conductance steps observed in the MCBJ experiments. We estimate the absolute conductance for each single terminal subcircuit and its percentage contribution to the 4 experimentally observed conductance states. We also provide a detailed analysis of the role of quantum interference and thermal fluctuations in modulating conductance within the subcircuits of the TP1 molecular breadboard. Finally, we discuss the possible development of molecular circuit theory and experimental advances necessary for mapping conductance through complex single molecular breadboard circuits in terms of their constituent subcircuits.