A small proton charge radius from an electron-proton scattering experiment.

Elastic electron-proton scattering (e-p) and the spectroscopy of hydrogen atoms are the two methods traditionally used to determine the proton charge radius, rp. In 2010, a new method using muonic hydrogen atoms1 found a substantial discrepancy compared with previous results2, which became known as the 'proton radius puzzle'. Despite experimental and theoretical efforts, the puzzle remains unresolved. In fact, there is a discrepancy between the two most recent spectroscopic measurements conducted on ordinary hydrogen3,4. Here we report on the proton charge radius experiment at Jefferson Laboratory (PRad), a high-precision e-p experiment that was established after the discrepancy was identified. We used a magnetic-spectrometer-free method along with a windowless hydrogen gas target, which overcame several limitations of previous e-p experiments and enabled measurements at very small forward-scattering angles. Our result, rp = 0.831 ± 0.007stat ± 0.012syst femtometres, is smaller than the most recent high-precision e-p measurement5 and 2.7 standard deviations smaller than the average of all e-p experimental results6. The smaller rp we have now measured supports the value found by two previous muonic hydrogen experiments1,7. In addition, our finding agrees with the revised value (announced in 2019) for the Rydberg constant8-one of the most accurately evaluated fundamental constants in physics.

Natural dead sea salt and retrospective dosimetry.

Accidents resulting in widespread dispersal of radioactive materials have given rise to a need for materials that are convenient in allowing individual dose assessment. The present study examines natural Dead Sea salt adopted as a model thermoluminescence dosimetry system. Samples were prepared in two different forms, loose-raw and loose-ground, subsequently exposed to 60Co gamma-rays, delivering doses in the range 2-10 Gy. Key thermoluminescence (TL) properties were examined, including glow curves, dose response, sensitivity, reproducibility and fading. Glow curves shapes were found to be independent of given dose, prominent TL peaks for the raw and ground samples appearing in the temperature ranges 361-385 ºC and 366-401 ºC, respectively. The deconvolution of glow curves has been undertaken using GlowFit, resulting in ten overlapping first-order kinetic glow peaks. For both sample forms, the integrated TL yield displays linearity of response with dose, the loose-raw salt showing some 2.5 × the sensitivity of the ground salt. The samples showed similar degrees of fading, with respective residual signals 28 days post-irradiation of 66% and 62% for the ground and raw forms respectively; conversely, confronted by light-induced fading the respective signal losses were 62% and 80%. The effective atomic number of the Dead Sea salt of 16.3 is comparable to that of TLD-200 (Zeff 16.3), suitable as an environmental radiation monitor in accident situations but requiring careful calibration in the reconstruction of soft tissue dose (soft tissue Zeff 7.2). Sample luminescence studies were carried out via Raman and Photoluminescence spectroscopy as well as X-ray diffraction, ionizing radiation dependent variation in lattice structure being found to influence TL response.

Beam-Target Helicity Asymmetry for γ[over →]n[over →]→π

We report the first beam-target double-polarization asymmetries in the γ+n(p)→π^{-}+p(p) reaction spanning the nucleon resonance region from invariant mass W=1500 to 2300 MeV. Circularly polarized photons and longitudinally polarized deuterons in solid hydrogen deuteride (HD) have been used with the CEBAF Large Acceptance Spectrometer (CLAS) at Jefferson Lab. The exclusive final state has been extracted using three very different analyses that show excellent agreement, and these have been used to deduce the E polarization observable for an effective neutron target. These results have been incorporated into new partial wave analyses and have led to significant revisions for several γnN^{*} resonance photocouplings.

Environmental monitoring through use of silica-based TLD.

The sensitivity of a novel silica-based fibre-form thermoluminescence dosimeter was tested off-site of a rare-earths processing plant, investigating the potential for obtaining baseline measurements of naturally occurring radioactive materials. The dosimeter, a Ge-doped collapsed photonic crystal fibre (PCFc) co-doped with B, was calibrated against commercially available thermoluminescent dosimetry (TLD) (TLD-200 and TLD-100) using a bremsstrahlung (tube-based) x-ray source. Eight sampling sites within 1 to 20 km of the perimeter of the rare-earth facility were identified, the TLDs (silica- as well as TLD-200 and TLD-100) in each case being buried within the soil at fixed depth, allowing measurements to be obtained, in this case for protracted periods of exposure of between two to eight months. The values of the dose were then compared against values projected on the basis of radioactivity measurements of the associated soils, obtained via high-purity germanium gamma-ray spectrometry. Accord was found in relative terms between the TL evaluations at each site and the associated spectroscopic results. Thus said, in absolute terms, the TL evaluated doses were typically less than those derived from gamma-ray spectroscopy, by ∼50% in the case of PCFc-Ge. Gamma spectrometry analysis typically provided an upper limit to the projected dose, and the Marinelli beaker contents were formed from sieving to provide a homogenous well-packed medium. However, with the radioactivity per unit mass typically greater for smaller particles, with preferential adsorption on the surface and the surface area per unit volume increasing with decrease in radius, this made for an elevated dose estimate. Prevailing concentrations of key naturally occurring radionuclides in soil, 226Ra, 232Th and 40K, were also determined, together with radiological dose evaluation. To date, the area under investigation, although including a rare-earth processing facility, gives no cause for concern from radiological impact. The current study reveals the suitability of the optical fibre based micro-dosimeter for all-weather monitoring of low-level environmental radioactivity.

Polarization Transfer in Wide-Angle Compton Scattering and Single-Pion Photoproduction from the Proton.

Wide-angle exclusive Compton scattering and single-pion photoproduction from the proton have been investigated via measurement of the polarization transfer from a circularly polarized photon beam to the recoil proton. The wide-angle Compton scattering polarization transfer was analyzed at an incident photon energy of 3.7 GeV at a proton scattering angle of θ_{cm}^{p}=70°. The longitudinal transfer K_{LL}, measured to be 0.645±0.059±0.048, where the first error is statistical and the second is systematic, has the same sign as predicted for the reaction mechanism in which the photon interacts with a single quark carrying the spin of the proton. However, the observed value is ~3 times larger than predicted by the generalized-parton-distribution-based calculations, which indicates a significant unknown contribution to the scattering amplitude.

Graphite foils as potential skin and epithelium dosimeters at therapeutic photon energies.

This work builds upon a prior study, examining the dosimetric utility of pencil lead and thin graphitic sheets, focusing upon the measurement of skin doses within the mammographic regime. In recognizing the near soft-tissue equivalence of graphite and the earlier-observed favourable thermoluminescence yield of thin sheets of graphite, this has led to present study of 50 µm thick graphite for parameters typical of external beam fractionated radiotherapy and skin dose evaluations. The graphite layers were annealed and then stacked to form an assembly of 0.5 mm nominal thickness. Using a 6 MV photon beam and delivering doses from 2- to 60 Gy, irradiations were conducted, the assembly first forming a superficial layer to a solid water phantom and subsequently underlying a 1.5 cm bolus, seeking to circumvent the build-up to electronic equilibrium for skin treatments. Investigations were made of several dosimetric properties arising from the thermoluminescence yield of the 50 µm thick graphite slabs, in particular proportionality and sensitivity to dose. The results show excellent sensitivity within the dose range of interest, the thermoluminescence response varying with increasing depth through the stacked graphite layers, obtaining a coefficient of determination of 90%. Acknowledging there to be considerable challenge in accurately matching skin thickness with dose, the graphite sheets have nevertheless shown considerable promise as dosimeters of skin, sensitive in determination of dose from the surface of the graphite through to sub-dermal depth thicknesses.

The Strength and Fracture Characteristics of One-Part Strain-Hardening Green Alkali-Activated Engineered Composites.

Alkali-activated engineered composites (AAECs) are cement-free composites developed using alkali activation technology, which exhibit strain hardening and multiple micro-cracking like conventional engineered cementitious composites (ECCs). Such AAECs are developed in this study by incorporating 2% v/v polyvinyl alcohol (PVA) fibers into alkali-activated mortars (AAMs) produced using binary/ternary combinations of fly ash class C (FA-C), fly ash class F (FA-F), and ground-granulated blast furnace slag (GGBFS) with powder-form alkaline reagents and silica sand through a one-part mixing method under ambient curing conditions. The mechanical and microstructural characteristics of eight AAECs are investigated to characterize their strain-hardening performance based on existing (stress and energy indices) and newly developed tensile/flexural ductility indices. The binary (FA-C + GGBFS) AAECs obtained higher compressive strengths (between 48 MPa and 52 MPa) and ultrasonic pulse velocities (between 3358 m/s and 3947 m/s) than their ternary (FA-C + FA-F + GGBFS) counterparts. The ternary AAECs obtained a higher fracture energy than their binary counterparts. The AAECs incorporating reagent 2 (Ca(OH)2: Na2SO4 = 2.5:1) obtained a greater fracture energy and compressive strengths than their counterparts with reagent 1 (Ca(OH)2: Na2SiO3.5H2O = 1:2.5), due to additional C-S-H gel formation, which increased their energy absorption for crack propagation through superior multiple-cracking behavior. A lower fracture and crack-tip toughness facilitated the development of enhanced flexural strength characteristics with higher flexural strengths (ranging from 5.3 MPa to 11.3 MPa) and a higher energy ductility of the binary AAMs compared to their ternary counterparts. The tensile stress relaxation process was relatively gradual in the binary AAECs, owing to the formation of a more uniform combination of reaction products (C-S-H/C-A-S-H) rather than a blend of amorphous (N-C-A-S-H/N-A-S-H) and crystalline (C-A-S-H/C-S-H) binding phases in the case of the ternary AAECs. All the AAECs demonstrated tensile strain-hardening characteristics at 28 days, with significant improvements from 28% to 100% in the maximum bridging stresses for mixes incorporating 40% to 45% GGBFS at 365 days. This study confirmed the viability of producing green cement-free strain-hardening alkali-activated composites with powder-form reagents, with satisfactory mechanical characteristics under ambient conditions.

Shrinkage, Permeation and Freeze-Thaw Characteristics of Ambient Cured High Calcium-Based Alkali-Activated Engineered Composites.

Sustainable zero cement-based one-part ambient cured alkali-activated engineered composites (AAECs) are developed. The durability and microstructural characteristics of developed AAECs using 2% v/v polyvinyl alcohol (PVA) fibers, silica sand, binary or ternary combinations of precursors (fly ash class C 'FA-C', fly ash class F 'FA-F' and ground granulated blast furnace slag 'GGBFS') and two types of powder form alkaline reagents (Type 1 and Type 2) are evaluated compared to conventional engineered cementitious composites (ECCs) and alkali-activated mortars (AAMs) without fiber. AAECs developed satisfactory compressive strength ranging from 34 MPa to 46 MPa. Expansion/shrinkage and mass change (loss/gain) behaviors are affected by binary/ternary combination of source materials, reagent types and curing regimes (water or ambient) for both AAMs and AAECs. The binary (FA-C + GGBFS) and reagent 2 (calcium hydroxide + sodium sulfate) composites demonstrated lower shrinkage due to formation of crystalline C-A-S-H/C-S-H binding phases than their ternary (FA-C + FA-F + GGBFS) and reagent 1 (calcium hydroxide + sodium metasilicate) counterparts which formed amorphous N-C-A-S-H/N-A-S-H phases. The matrix densification due to the formation of reaction products and fiber-induced micro-confinement leads to lower shrinkage and mass change of AAECs compared to their AAM counterparts. Composites exhibited lower or comparable secondary sorptivity indices compared to control ECC, indicating their superior permeation performance. All AAECs had a relative dynamic modulus of elasticity (RDME) greater than 90% at 300 cycles (comparable to control ECC), exhibiting satisfactory freeze-thaw resistance with reagent 2 mixes showing better performance compared to those with reagent 1. The production feasibility of strain hardening AAECs with powder form reagents having satisfactory mechanical and durability properties is confirmed.

Carbon rich media for luminescence-based surface dosimetry and study of associated surface defects.

The present study continues research into the utilisation of carbonaceous media for medical radiation dosimetry, focusing on the effects of surface area-to-volume ratio and carbon content on structural interaction alterations and dosimetric properties in sheet- and bead-type graphitic materials (with the respective carbon content of ∼98 wt% and ∼90 wt%). Using 60Co gamma-rays and doses from 0.5 Gy to 20 Gy, the study has been made of the response of commercially available graphite in the form of 0.1 mm, 0.2 mm, 0.3 mm and 0.5 mm thick sheets, also of activated carbon beads. Confocal Raman and photoluminescence spectroscopy have been employed, examining radiation-induced structural interaction alterations. Dose-dependent variation in the Raman intensity ratio ID/IG relates to the varying dominance of defect generation and dose-driven defect annealing. Of the various thickness graphite sheets, the 0.1 mm thick medium possesses the greatest surface area-to-volume ratio. Perhaps unsurprisingly, it also exhibits the greatest thermoluminescence (TL) yield compared to that of the other carbonaceous sheet foils used herein. Moreover, the second greatest mass-normalised TL yield has been observed to be that of the porous beads, reflected in the greater defect density (ID/IG > 2) when compared to the other media, due in part to their inherent feature of large internal surface area. Considering the challenge posed in matching skin thickness with skin dose, the near tissue equivalent graphite sheets show particular promise as a skin dosimeter, sensitive as a function of depth.

Influence of Trichoderma harzianum and Bacillus thuringiensis with reducing rates of NPK on growth, physiology, and fruit quality of Citrus aurantifolia.

Continuous use of chemical fertilizers gradually shrinks the crop yield and quality, and these adverse effects can be reduced by adopting new sustainable practices such as the use of manure, biofertilizers, and nano fertilizers. Limited information is existed on the application of Trichoderma harzianum and Bacillus thuringiensis microbes to improve lemon seedlings growth, physiology, and fruit formation. Therefore, the current study is aimed to evaluate the effects of T. harzianum and B. thuringiensis microbes mixing with low levels of inorganic fertilizer (NPK) on the plant growth, development, and quality of limau nipis (key lemon) fruits. The lemon seedlings growing media were inoculated during transplanting with T. harzianum and B. thuringiensis at various NPK fertilizers under polybagged conditions. The seedlings were grown around eighteen (18) months after inoculation with biofertilizers followed by Randomized Complete Block Design (RCBD) with five (5) replications. The results showed that T. harzianum with 50 g of NPK treatment (T2) increased the seedling's height, branch number, leaf height, ground area, and absolute growth rate (AGR) plant height by 50.12%, 107.84%, 17.91%, 17.91%, 116.93%, and 56.02%, respectively, over the control treatment. The number of leaves (60.82%), leaf area (42.75%), stem diameter (27.34%), specific leaf area (SLA) (39.07%), leaf area index (LAI) (54.40%), and absolute growth rate for leaf number (73.86%), leaf area (306.85%) and stem diameter (46.8%) of lemon seedlings increased significantly with B. thuringiensis plus 50 g NPK treatment (T3). The applications of B. thuringiensis with 25 g NPK fertilizer treatment (T5) increased leaf fresh weight (LFW), leaf dry weight (LDW), leaf moisture content (LMC), specific leaf weight (SLW), leaf relative growth rate (RGR), and chlorophyll content by 96.45%, 56.78%, 13.60%, 24.76%, 45.45%, and 16.22%, respectively, over the control group. In addition, T5 treatment increased the fruits number, individual fruit weight, fruit diameter, fruit dimension, leaf total soluble solids (TSS), and fruit TSS content of lemon tress by 81.81%, 55.52%, 43.54%, 25.69%, 89.47%, and 70.78% compared to the control treatment. Furthermore, soil inoculation of B. thuringiensis significantly increased the pulp to peel ratio and juice content of lemon fruits. From this study, it can be concluded that soil inoculation of both T. harzianum and B. thuringiensis with 25-50% NPK during transplanting improved plant growth, physiology, and fruit quality of limau nipis trees.

Cadmium toxicity symptoms and uptake mechanism in plants: a review.

Cadmium (Cd) is one of non-essential heavy metals which is released into environment naturally or anthropogenically. It is highly persistent toxic metals that are exceptionally distressing industrial and agriculture activities by contaminating soil, water and food. Its long-duration endurance in soil and water results in accumulation and uptake into plants, leading to the food chain. This becomes a serious global problem threatening humans and animals as food chain components. Living organisms, especially humans, are exposed to Cd through plants as one of the main vegetative food sources. This review paper is concentrated on the symptoms of the plants affected by Cd toxicity. The absorption of Cd triggers several seen and unseen symptoms by polluted plants such as stunted growth, chlorosis, necrosis and wilting. Apart from that, factors that affect the uptake and translocation of Cd in plants are elaborated to understand the mechanism that contributes to its accumulation. By insight of Cd accumulation, this review also discussed the phytoremediation techniques-phytoextraction, phytostimulation, phytostabilization, phytovolatization and rhizofiltration in bioremediating the Cd.

Efficacy and Safety of the Awake Prone Positioning in Patients with COVID-19 Related Respiratory Distress: A Scoping Review.

Prone positioning (PP) is becoming an important treatment modality for the management of COVID-19 related respiratory distress syndrome. The aim of this scoping review was to evaluate effectiveness and safety of awake PP in non-intubated patients with COVID-19 related acute respiratory distress at different care settings. The study was conducted during December 1, 2019 to August 30, 2020 using health science electronic databases and grey literature. A PRISMA flow diagram was used and finally 06 studies with 187 patients were included for review. Male patients were predominating with the mean age of approximately 55 years. Oxygenation was improved in 79.14% patients. One hundred fifty seven (83.95%) patients with COVID-19-related hypoxemic respiratory distress tolerated the procedure. Intubations required 25.41% of the patients or mechanical ventilation and 6(3.2%) patients expired. Number of patients in the reported studies could tolerate more than 3 hours of PP without a major side effect. Awake proning improved oxygenation of the patients suffering from COVID-19 related respiratory hypoxia in different care settings. Early instituted prone positioning may be an effective alternative method of treating COVID-19 related respiratory distress. Patient compliance and small size cohort studies are the limitations of this review. Multicenter controlled studies are warranted before conclusions are made about safety and the settings.

Effects of Indole-3-Butyric Acid (IBA) and rooting media on rooting and survival of air layered wax apple (Syzygium samarangense) CV Jambu Madu.

The wax apple or jambu madu, is a non-climacteric tropical fruit from Myrtaceae family and widely cultivated in South East Asia. The limited availability of good quality seedlings of wax apple is the main problem to development of flourish it's market share in the current fruit industry. Therefore, in order to produce good quality planting materials, a study aimed at optimizing propagation and adventitious rooting technique and survivability of wax apple air layer was conducted. In this study, four different levels of Indole-3-Butyric Acid (IBA) concentration (0, 1000, 1500 and 2000 mg L-1) and three rooting media (sphagnum moss, vermicompost and garden soil) were applied after removal of bark (phloem) on the shoot to determine the effect on rooting and survivability of the wax apple air layer under field conditions. The results showed that the wax apple shoots treated with 2000 mg L-1 IBA produced the significantly higher number of roots, increased length of root, diameter of branch, length of branch, number of leaf and leaf area of air layers. In addition, the highest chlorophyll content and stomatal aperture were recorded in 2000 mg L-1 IBA treatment compared to other treatments including control. Vermicompost medium was better than garden soil and sphagnum moss in respect of rooting and survivability of air layers. The results showed that the combination of 2000 mg L-1 IBA and vermicompost as rooting media give the best combination to root initiation, root number, root length and survival rate (100%) of wax apple air layers. From this study, it can be concluded that 2000 mg L-1 IBA and vermicompost treatment enhance the root initiation, early establishment and survivability of wax apple air layered under field conditions.

Dosimetric characteristics of Gd-doped silica glass subjected to neutron and gamma irradiations.

The dosimetric characteristics of newly developed gadolinium (Gd) glass dosimeter produced via sol-gel method are reported. Irradiation were made using a 750 kW neutron flux thermal power and 1.25 MeV 60Co gamma rays with entrance doses from 2 to 10 Gy. Investigation has been done on various Gd dopant concentrations, ranging from 1 to 10 mol%. The Gd-doped silica glass have been characterised for thermoluminescence (TL) dose response, sensitivity, linearity index, glow curve and kinetic parameter analysis. For particular dopant concentration obtained in 6 mol% Gd, the least squares fit shows the change in TL yield, correlation coefficient (r2) of better than 0.980 (at 95% confidence level), with neutron and gamma exposure to be 8 and 4 times greater than that of 1 mol% Gd, respectively. Broad peaks in the absence of any sharp peak observed in the glow curve confirms the amorphous nature of the prepared glass. A glow curve of Gd-doped SiO2 sample is observed with a single prominent peak (Tm) within 200-250 °C (peak shifting appears with respect to the increment of dopant concentration) and 350 °C (for all respective Gd dopants) for neutron and gamma irradiations, respectively. Deconvolution shows the glow curves of the Gd-doped SiO2 glass to be formed of seven and five overlapping peaks, with figures of merit below 2% (FOM) of between 1.38-1.79 and 1.30-1.97 for the particular neutron and gamma irradiations, respectively. Through use of Glowfit deconvolution software, the key trapping parameters of activation energy, E and frequency factor, s-1 were calculated for the Gd-doped SiO2 glass. The mechanism of TL yield with the gradual increase in Gd concentrations and doses is explained upon the incorporation of Gd and radiation damage that change the structure of the electron traps in the glass matrix. These early results indicate that selectively screened Gd-SiO2 glass can be developed into a promising TL system towards dosimetric applications.

New Measurement of the π0 radiative decay width.

High precision measurements of the differential cross sections for π0 photoproduction at forward angles for two nuclei, 12C and 208Pb, have been performed for incident photon energies of 4.9-5.5 GeV to extract the π0→γγ decay width. The experiment was done at Jefferson Lab using the Hall B photon tagger and a high-resolution multichannel calorimeter. The π0→γγ decay width was extracted by fitting the measured cross sections using recently updated theoretical models for the process. The resulting value for the decay width is Γ(π0→γγ)=7.82±0.14(stat)±0.17(syst) eV. With the 2.8% total uncertainty, this result is a factor of 2.5 more precise than the current Particle Data Group average of this fundamental quantity, and it is consistent with current theoretical predictions.

Search for a new gauge boson in electron-nucleus fixed-target scattering by the APEX experiment.

We present a search at the Jefferson Laboratory for new forces mediated by sub-GeV vector bosons with weak coupling α' to electrons. Such a particle A' can be produced in electron-nucleus fixed-target scattering and then decay to an e + e- pair, producing a narrow resonance in the QED trident spectrum. Using APEX test run data, we searched in the mass range 175-250 MeV, found no evidence for an A'→ e+ e- reaction, and set an upper limit of α'/α ~/= 10(-6). Our findings demonstrate that fixed-target searches can explore a new, wide, and important range of masses and couplings for sub-GeV forces.

The axis of interleukin 12 and gamma interferon regulates acute vascular xenogeneic rejection.

Recent advances using transgenic animals or exogenous complement inhibitors have demonstrated prevention of hyperacute rejection of vascularized organs, but not graft loss due to acute vascular rejection. Using various wild-type and cytokine-deficient mice strains, we have examined the mechanisms of acute vascular rejection. C57BL/6 mice deficient in interleukin12 or gamma interferon showed faster acute vascular rejection than did wild-type mice. Furthermore, mice defective in B-cell development showed no acute vascular rejection. These results demonstrate that the axis of interleukin 12 and gamma interferon provides a survival advantage in vascularized xenografts by delaying or preventing acute vascular rejection caused by a B cell-dependent mechanism.

Survey of Portulacaceae family flora in Taif, Saudi Arabia.

The presence of weeds in areas of agricultural activities is a hinderance to the development of these activities. It is important to take advantage of the vast open spaces suitable for agriculture and provide food security for humans, and also it is an important indicator for determining the feasibility of growing crops, benefiting from yield and determining the percentage of loss, clearing fields through agricultural practices, that protect crops from weed attack and agricultural practice method must be followed that will reduce weed presence. This study was conducted during the years 2018 to 2020 to evaluate Portulacaceae of Flora in the Taif area in the Kingdom of Saudi Arabia at different altitudes (Area 1 =1700 m, Area 2 =1500 m, Area 3 =1500 m, Area 4 =500 m ِ Area 5 = 2200 m, and Area 6 = 2200 m). The results show that there were 2,816 individuals of Portulaca oleracea weed, with the highest density found in A 1, followed by A 2, while in A 5 and A 6, no weeds were recorded. The highest density of weeds were in the Pomegranate fields, followed by Grape fields. The lowest density was found in A man field. The results of this study will help to take the necessary measures to combat weeds and its management in areas of agricultural activity, while more studies are needed to survey the ecology of weeds of Taif in The Kingdom of Saudi Arabia.

The Usages and Potential Uses of Alginate for Healthcare Applications.

Due to their unique properties, alginate-based biomaterials have been extensively used to treat different diseases, and in the regeneration of diverse organs. A lot of research has been done by the different scientific community to develop biofilms for fulfilling the need for sustainable human health. The aim of this review is to hit upon a hydrogel enhancing the scope of utilization in biomedical applications. The presence of active sites in alginate hydrogels can be manipulated for managing various non-communicable diseases by encapsulating, with the bioactive component as a potential site for chemicals in developing drugs, or for delivering macromolecule nutrients. Gels are accepted for cell implantation in tissue regeneration, as they can transfer cells to the intended site. Thus, this review will accelerate advanced research avenues in tissue engineering and the potential of alginate biofilms in the healthcare sector.