Adaptive cooling strategy via human hair: High optothermal conversion efficiency of solar radiation into thermal dissipation.

Natural species have developed complex nanostructures in a hierarchical pattern to control the absorption, reflection, or transmission of desired solar and infrared wavelengths. This bio-inspired structure is a promising method to manipulating solar energy and thermal management. In particular, human hair is used in this article to highlight the optothermal properties of bio-inspired structures. This study investigated how melanin, an effective solar absorber, and the structural morphology of aligned domains of keratin polymer chains, leading to a significant increase in solar path length, which effectively scatter and absorb solar radiation across the hair structure, as well as enhance thermal ramifications from solar absorption by fitting its radiative wavelength to atmospheric transmittance for high-yield radiative cooling with realistic human body thermal emission.

Antimicrobial and Antifouling Effects of Petal-Like Nanostructure by Evaporation-Induced Self-Assembly for Personal Protective Equipment.

Although the personal protective equipment (PPE) used by healthcare workers (HCWs) effectively blocks hazardous substances and pathogens, it does not fully rule out the possibility of infection, as pathogens surviving on the fabric surface pose a substantial risk of cross-infection through unintended means. Therefore, PPE materials that exhibit effective biocidal activity while minimizing contamination by viscous body fluids (e.g., blood and saliva) and pathogen-laden droplets are highly sought. In this study, petal-like nanostructures (PNSs) are synthesized through the vertical rearrangement of colloidal lamellar bilayers via evaporation-induced self-assembly of octadecylamine, silica-alumina sol, and diverse photosensitizer. The developed method is compatible with various fabrics and imparts visible-light-activated antimicrobial and superhydrophobic-based antifouling activities. PNS-coated fabrics could provide a high level of protection and effectively block pathogen transmission as exemplified by their ability to roll off viscous body fluids reducing bacterial droplet adhesion and to inactivate various microorganisms. The combination of antifouling and photobiocidal activities results in the complete inactivation of sprayed pathogen-laden droplets within 30 min. Thus, this study paves the way for effective contagious disease management and the protection of HCWs in general medical environments, inspiring further research on the fabrication of materials that integrate multiple useful functionalities.

5G-AKA-FS: A 5G Authentication and Key Agreement Protocol for Forward Secrecy.

5G acts as a highway enabling innovative digital transformation and the Fourth Industrial Revolution in our lives. It is undeniable that the success of such a paradigm shift hinges on robust security measures. Foremost among these is primary authentication, the initial step in securing access to 5G network environments. For the 5G primary authentication, two protocols, namely 5G Authentication and Key Agreement (5G-AKA) and Improved Extensible Authentication Protocol Method for 3rd Generation Authentication and Key Agreement (EAP-AKA'), were proposed and standardized, where the former is for 3GPP devices, and the latter is for non-3GPP devices. Recent scrutiny has unveiled vulnerabilities in the 5G-AKA protocol, exposing it to security breaches, including linkability attacks. Moreover, mobile communication technologies are dramatically evolving while 3GPP has standardized Authentication and Key Management for Applications (AKMA) to reuse the credentials, generated during primary authentication, for 5G network applications. That makes it so significant for 5G-AKA to be improved to support forward secrecy as well as address security attacks. In response, several protocols have been proposed to mitigate these security challenges. In particular, they tried to strengthen security by reusing secret keys negotiated through the Elliptic Curve Integrated Encryption Scheme (ECIES) and countering linkability attacks. However, they still have encountered limitations in completing forward secrecy. Motivated by this, we propose an augmentation to 5G-AKA to achieve forward security and thwart linkability attacks (called 5G-AKA-FS). In 5G-AKA-FS, the home network (HN), instead of using its static ECIES key pair, generates a new ephemeral key pair to facilitate robust session key negotiation, truly realizing forward security. In order to thoroughly and precisely prove that 5G-AKA-FS is secure, formal security verification is performed by applying both BAN Logic and ProVerif. As a result, it is demonstrated that 5G-AKA-FS is valid. Besides, our performance comparison highlights that the communication and computation overheads are intrinsic to 5G-AKA-FS. This comprehensive analysis showcases how the protocol effectively balances between security and efficiency.

A python script for longitudinally measuring the duration of vacant land uses.

Populating and depopulating cities have some degree of underutilised land. The duration of vacancy, or length of time a property remains unused, more strongly influences urban decline than the amount of vacant land. Assessment of the duration of vacancy is seldom conducted, due to a lack of linking longitudinal data. This research creates and applies a Python script to track the duration of vacancy in Minneapolis, MN, U.S.A, to create a tool that can be utilised by cities with vacant land inventories. The tool can be used globally to prioritise treatment areas for urban regeneration plans.

Quality Indicators for Evaluating the Health Care of Patients with Rheumatoid Arthritis: a Korean Expert Consensus.

BACKGROUND: There is increasing interest in the quality of health care and considerable efforts are being made to improve it. Rheumatoid arthritis (RA) is a disease that can result in favorable outcomes when appropriate diagnosis and treatment are provided. However, several studies have shown that RA is often managed inappropriately. Therefore, the Korean College of Rheumatology aimed to develop quality indicators (QIs) to evaluate and improve the health care of patients with RA. METHODS: Preliminary QIs were derived based on the existing guidelines and QIs for RA. The final QIs were determined through two separate consensus meetings of experts. The consensus was achieved through a panel of experts who voted using the modified Delphi method. RESULTS: Fourteen final QIs were selected among 70 preliminary QIs. These included early referral to and regular follow-up with a rheumatologist, radiographs of the hands and feet, early initiation and maintenance of disease-modifying anti-rheumatic drug (DMARD) therapy, periodic assessment of disease activity, screening for drug safety and comorbidities, including viral hepatitis and tuberculosis before biologic DMARD therapy, periodic laboratory testing, supplementation with folic acid, assessment of the risk for cervical spine instability before general anesthesia, patient education, and specialized nurse. CONCLUSION: These QIs can be used to assess and improve the quality of health care for patients with RA.

Influence of Backbone Curvature on the Organic Electrochemical Transistor Performance of Glycolated Donor-Acceptor Conjugated Polymers.

Two new glycolated semiconducting polymers PgBT(F)2gT and PgBT(F)2gTT of differing backbone curvatures were designed and synthesised for application as p-type accumulation mode organic electrochemical transistor (OECT) materials. Both polymers demonstrated stable and reversible oxidation, accessible within the aqueous electrochemical window, to generate polaronic charge carriers. OECTs fabricated from PgBT(F)2gT featuring a curved backbone geometry attained a higher volumetric capacitance of 170 F cm-3 . However, PgBT(F)2gTT with a linear backbone displayed overall superior OECT performance with a normalised peak transconductance of 3.00×104  mS cm-1 , owing to its enhanced order, expediting the charge mobility to 0.931 cm2 V-1 s-1 .

Size-Controllable, Single-Step, and Scalable Synthesis of Hollow Polymer Nanoparticles.

Hollow polymer nanoparticles are of great importance in various industrial fields such as drug delivery vehicles in pharmaceutics, high thermal insulation materials for heat flow blocking and energy savings, and materials with unique optical properties. While the fabrication methods for hollow polymer nanoparticles have been studied and developed by numerous researchers, most synthesis methods require a rather complicated process, including a thorough core-washing step to formulate pores inside the particles. Single-step synthesis methods were developed to overcome this practical issue by utilizing the sacrificial solvent filling the pores temporarily and having it naturally evaporate without further process; however, such processes could not produce sub-200 nm diameter particles, which limit the application for high surface area applications. Herein, we have developed an innovative synthesis method that can overcome the particle size limitation by utilizing a sacrificial solvent for pore formation and a recondensation inhibitor. Pseudo-state Ostwald ripening was realized by selecting the sacrificial solvent with less affinity to the copolymer of hollow polymer particles, thus inhibiting the particle growth during polymerization. We have successfully obtained 120 nm diameter hollow PS-PMMA copolymer particles in large quantity via the single-step preparation of emulsion polymerization.

Correction to: Immediate and delayed hypersensitivity after intra-arterial injection of iodinated contrast media: a prospective study in patients with coronary angiography.

The original version of this article, published on 01 April 2019, unfortunately contained a mistake. The presentation of Fig. 1 was incorrect. The corrected figure is given below.

Screening of Phosphodiesterase-5 Inhibitors and Their Analogs in Dietary Supplements by Liquid Chromatography-Hybrid Ion Trap-Time of Flight Mass Spectrometry.

An accurate and reliable method based on ion trap-time of flight mass spectrometry (IT-TOF MS) was developed for screening phosphodiesterase-5 inhibitors, including sildenafil, vardenafil, and tadalafil, and their analogs in dietary supplements. Various parameters affecting liquid chromatographic separation and IT-TOF detection were investigated, and the optimal conditions were determined. The separation was achieved on a reversed-phase column under gradient elution using acetonitrile and water containing 0.2% acetic acid at a flow rate of 0.2 mL/min. The chromatographic eluents were directly ionized in the IT-TOF system equipped with an electrospray ion source operating in the positive ion mode. The proposed screening method was validated by assessing its linearity, precision, and accuracy. Sequential tandem MS was conducted to obtain structural information of the references, and the fragmentation mechanism of each reference was proposed for providing spectral insight for newly synthesized analogs. Structural information, including accurate masses of both parent and fragment ions, was incorporated into the MSn spectral library. The developed method was successfully applied for screening adulterated dietary supplement samples.

Urban regeneration: Community engagement process for vacant land in declining cities.

Vacant land presents many challenges for older financially distressed cities. Community engagement is a very important element to solve the urban vacant land problem and assist in long term regeneration. This paper reviews what plans, policies, implementation methods, and community engagement process were developed to overcome barriers and challenges to vacant land projects. Most studies reveal that the importance of community engagement process in terms of understanding the problems and potential value of vacant land, redevelopment process, financial support, regulation, and neighborhood organizations participation for vacant land projects. To encourage community engagement to repurpose vacant land, municipalities should have to provide adequate information about vacant land conditions and their potentials in terms of ecological and social value. Code enforcement and tax foreclosure are efficient ways to control vacant land and the abandoned building problem. Tax incentive systems, such as high taxation rates on land but a low rate or no tax at all on infill development on vacant land, tax credits on vacant land forest structure, and rehabilitation abatement on abandoned buildings can increase public investment in vacant land. Local governments should support such efforts by creating community involvement groups, such as neighborhood coordinators, civic leaders, CDCs (Community Development Corporations), and other community-based nonprofit organizations. Community engagement is not specific planning, but it is part of an ongoing process in planning strategies to urban regeneration and renewal vacant land.

Immediate and delayed hypersensitivity after intra-arterial injection of iodinated contrast media: a prospective study in patients with coronary angiography.

OBJECTIVES: While hypersensitivity reactions (HSR) to intravenously administered iodinated contrast media (ICM) have been well studied, not much is known about HSR to intra-arterially administered ICM. METHODS: A prospective observational study was performed to evaluate coronary angiography (CAG)-induced ICM hypersensitivity in patients who underwent CAG using ICM including ioversol, a low-osmolar non-ionic monomer, and iodixanol, an iso-osmolar non-ionic dimer. The HSR were investigated through in-patient monitoring after CAG and telephone interview after discharge. RESULTS: A total of 714 patients were enrolled during the observation period, of whom 26 (3.6%) showed immediate HSR and 108 (15.1%) showed delayed HSR. With regard to severity, proportion of immediate HSR grades 1, 2, and 3 was 57.7%, 38.5%, and 3.8%, respectively, whereas that of delayed HSR grades 1, 2, and 3 was 85.2%, 13.9%, and 0.9%, respectively. Multivariate analysis revealed that previous intra-arterial exposure to ICM was an independent risk factor for immediate HSR (odds ratio (OR) 2.92, 95% confidence interval (CI) 1.22-6.96; p = 0.015). Iodixanol was a significant risk factor for delayed HSR (OR 1.61, 95% CI 1.07-2.43; p = 0.024) and correlated with a higher incidence of delayed HSR within 24-h post-ICM administration compared to ioversol. CONCLUSION: The incidence rate of immediate and delayed HSR in intra-arterially administered ICM was 3.6% and 15.1%, respectively. Previous exposure to intra-arterially administered contrast media was a significant risk factor for immediate HSR. Compared to ioversol, iodixanol was associated with relatively earlier and more frequent delayed HSR. KEY POINTS: • In this prospective study, the incidence of immediate and delayed hypersensitivity in intra-arterial injection of contrast media during coronary angiography was 3.6% and 15.1%, respectively. • Delayed hypersensitivity reactions were more common but less severe than immediate hypersensitivity reactions during coronary angiography. • Previous exposure to ICM via intra-arterial route was a significant risk factor for immediate hypersensitivity to intra-arterial contrast medium.

The Effect of Water on Quinone Redox Mediators in Nonaqueous Li-O2 Batteries.

The parasitic reactions associated with reduced oxygen species and the difficulty in achieving the high theoretical capacity have been major issues plaguing development of practical nonaqueous Li-O2 batteries. We hereby address the above issues by exploring the synergistic effect of 2,5-di-tert-butyl-1,4-benzoquinone and H2O on the oxygen chemistry in a nonaqueous Li-O2 battery. Water stabilizes the quinone monoanion and dianion, shifting the reduction potentials of the quinone and monoanion to more positive values (vs Li/Li+). When water and the quinone are used together in a (largely) nonaqueous Li-O2 battery, the cell discharge operates via a two-electron oxygen reduction reaction to form Li2O2, with the battery discharge voltage, rate, and capacity all being considerably increased and fewer side reactions being detected. Li2O2 crystals can grow up to 30 µm, more than an order of magnitude larger than cases with the quinone alone or without any additives, suggesting that water is essential to promoting a solution dominated process with the quinone on discharging. The catalytic reduction of O2 by the quinone monoanion is predominantly responsible for the attractive features mentioned above. Water stabilizes the quinone monoanion via hydrogen-bond formation and by coordination of the Li+ ions, and it also helps increase the solvation, concentration, lifetime, and diffusion length of reduced oxygen species that dictate the discharge voltage, rate, and capacity of the battery. When a redox mediator is also used to aid the charging process, a high-power, high energy density, rechargeable Li-O2 battery is obtained.

Identifying the Structural Basis for the Increased Stability of the Solid Electrolyte Interphase Formed on Silicon with the Additive Fluoroethylene Carbonate.

To elucidate the role of fluoroethylene carbonate (FEC) as an additive in the standard carbonate-based electrolyte for Li-ion batteries, the solid electrolyte interphase (SEI) formed during electrochemical cycling on silicon anodes was analyzed with a combination of solution and solid-state NMR techniques, including dynamic nuclear polarization. To facilitate characterization via 1D and 2D NMR, we synthesized 13C-enriched FEC, ultimately allowing a detailed structural assignment of the organic SEI. We find that the soluble poly(ethylene oxide)-like linear oligomeric electrolyte breakdown products that are observed after cycling in the standard ethylene carbonate-based electrolyte are suppressed in the presence of 10 vol% FEC additive. FEC is first defluorinated to form soluble vinylene carbonate and vinoxyl species, which react to form both soluble and insoluble branched ethylene-oxide-based polymers. No evidence for branched polymers is observed in the absence of FEC.

Re-exposure to low osmolar iodinated contrast media in patients with prior moderate-to-severe hypersensitivity reactions: A multicentre retrospective cohort study.

OBJECTIVES: To evaluate the outcomes of re-exposure to low-osmolar iodinated contrast medium (LOCM) in patients with a history of moderate-to-severe hypersensitivity reaction (HSR). METHODS: We retrospectively evaluated a cohort comprising all subjects satisfying the following conditions at 11 centres: (1) experienced a moderate-to-severe HSR to LOCM by December 2014, and (2) underwent contrast-enhanced computed tomography after the initial HSR between January 2014 and December 2014. RESULTS: A total of 150 patients with 328 instances of re-exposure were included; the recurrence rate of HSR was 19.5%. Patients with severe initial HSR exhibited a higher recurrence rate of severe HSR compared to patients with moderate initial HSR, despite more intensive premedication. In the multivariate analysis, the independent risk factors for recurrence of HSR were diabetes, chronic urticaria, drug allergy other than to iodinated contrast media (ICM) and severe initial HSR. The risk of recurrent HSR was 67.1% lower in cases where the implicated ICM was changed to another one (odds ratio: 0.329; P = 0.001). However, steroid premedication did not show protective effects against recurrent HSR. CONCLUSION: In high-risk patients who have previously experienced a moderate-to-severe initial HSR to LOCM, we should consider changing the implicated ICM to reduce recurrence risk. KEY POINTS: • In patients with moderate-to-severe HSR, steroid premedication only shows limited effectiveness. • Changing the implicated ICM can reduce the recurrence of HSR to ICM. • Diabetes, chronic urticaria and drug allergies increase the risk of ICM HSR.

Understanding LiOH Chemistry in a Ruthenium-Catalyzed Li-O2 Battery.

Non-aqueous Li-O2 batteries are promising for next-generation energy storage. New battery chemistries based on LiOH, rather than Li2 O2 , have been recently reported in systems with added water, one using a soluble additive LiI and the other using solid Ru catalysts. Here, the focus is on the mechanism of Ru-catalyzed LiOH chemistry. Using nuclear magnetic resonance, operando electrochemical pressure measurements, and mass spectrometry, it is shown that on discharging LiOH forms via a 4 e- oxygen reduction reaction, the H in LiOH coming solely from added H2 O and the O from both O2 and H2 O. On charging, quantitative LiOH oxidation occurs at 3.1 V, with O being trapped in a form of dimethyl sulfone in the electrolyte. Compared to Li2 O2 , LiOH formation over Ru incurs few side reactions, a critical advantage for developing a long-lived battery. An optimized metal-catalyst-electrolyte couple needs to be sought that aids LiOH oxidation and is stable towards attack by hydroxyl radicals.

Probing Oxide-Ion Mobility in the Mixed Ionic-Electronic Conductor La2NiO4+δ by Solid-State (17)O MAS NMR Spectroscopy.

While solid-state NMR spectroscopic techniques have helped clarify the local structure and dynamics of ionic conductors, similar studies of mixed ionic-electronic conductors (MIECs) have been hampered by the paramagnetic behavior of these systems. Here we report high-resolution (17)O (I = 5/2) solid-state NMR spectra of the mixed-conducting solid oxide fuel cell (SOFC) cathode material La2NiO4+δ, a paramagnetic transition-metal oxide. Three distinct oxygen environments (equatorial, axial, and interstitial) can be assigned on the basis of hyperfine (Fermi contact) shifts and quadrupolar nutation behavior, aided by results from periodic DFT calculations. Distinct structural distortions among the axial sites, arising from the nonstoichiometric incorporation of interstitial oxygen, can be resolved by advanced magic angle turning and phase-adjusted sideband separation (MATPASS) NMR experiments. Finally, variable-temperature spectra reveal the onset of rapid interstitial oxide motion and exchange with axial sites at ∼130 °C, associated with the reported orthorhombic-to-tetragonal phase transition of La2NiO4+δ. From the variable-temperature spectra, we develop a model of oxide-ion dynamics on the spectral time scale that accounts for motional differences of all distinct oxygen sites. Though we treat La2NiO4+δ as a model system for a combined paramagnetic (17)O NMR and DFT methodology, the approach presented herein should prove applicable to MIECs and other functionally important paramagnetic oxides.

Correction: Dye adsorption mechanisms in TiO2 films, and their effects on the photodynamic and photovoltaic properties in dye-sensitized solar cells.

Correction for 'Dye adsorption mechanisms in TiO2 films, and their effects on the photodynamic and photovoltaic properties in dye-sensitized solar cells' by Kyung-Jun Hwang et al., Phys. Chem. Chem. Phys., 2015, 17, 21974-21981.

Characterization of the dynamics in the protonic conductor CsH2PO4 by ¹7O solid-state NMR spectroscopy and first-principles calculations: correlating phosphate and protonic motion.

(17)O NMR spectroscopy combined with first-principles calculations was employed to understand the local structure and dynamics of the phosphate ions and protons in the paraelectric phase of the proton conductor CsH2PO4. For the room-temperature structure, the results confirm that one proton (H1) is localized in an asymmetric H-bond (between O1 donor and O2 acceptor oxygen atoms), whereas the H2 proton undergoes rapid exchange between two sites in a hydrogen bond with a symmetric double potential well at a rate ≥10(7) Hz. Variable-temperature (17)O NMR spectra recorded from 22 to 214 °C were interpreted by considering different models for the rotation of the phosphate anions. At least two distinct rate constants for rotations about four pseudo C3 axes of the phosphate ion were required in order to achieve good agreement with the experimental data. An activation energy of 0.21 ± 0.06 eV was observed for rotation about the P-O1 axis, with a higher activation energy of 0.50 ± 0.07 eV being obtained for rotation about the P-O2, P-O3(d), and P-O3(a) axes, with the superscripts denoting, respectively, dynamic donor and acceptor oxygen atoms of the H-bond. The higher activation energy of the second process is most likely associated with the cost of breaking an O1-H1 bond. The activation energy of this process is slightly lower than that obtained from the (1)H exchange process (0.70 ± 0.07 eV) (Kim, G.; Blanc, F.; Hu, Y.-Y.; Grey, C. P. J. Phys. Chem. C 2013, 117, 6504-6515) associated with the translational motion of the protons. The relationship between proton jumps and phosphate rotation was analyzed in detail by considering uncorrelated motion, motion of individual PO4 ions and the four connected/H-bonded protons, and concerted motions of adjacent phosphate units, mediated by proton hops. We conclude that, while phosphate rotations aid proton motion, not all phosphate rotations result in proton jumps.