Iodination of PEGylated Polymers Counteracts the Inhibition of Fibrinogen Adsorption by PEG.

Poly(ethylene glycol), PEG, known to inhibit protein adsorption, is widely used on the surfaces of biomedical devices when biofilm formation is undesirable. Poly(desaminotyrosyl-tyrosine ethyl ester carbonate), PDTEC, PC for short, has been a promising coating polymer for insertion devices, and it has been anticipated that PEG plays a similar role if it is copolymerized with PC. Earlier studies show that no fibrinogen (Fg) is adsorbed onto PC polymers with PEG beyond the threshold weight percentage. This is attributed to the phase separation of PEG. Further, iodination of the PC units in the PC polymer, (I2PC), has been found to counteract this Fg-repulsive effect by PEG. In this study, we employ surface-sensitive X-ray techniques to demonstrate the surface affinity of Fg toward the air-water interface, particularly in the presence of self-assembled PC-based film, in which its constituent polymer units are assumed to be much more mobile as a free-standing film. Fg is found to form a Gibbs monolayer with its long axis parallel to the aqueous surface, thus maximizing its interactions with hydrophobic interfaces. It influences the amount of insoluble, surface-bound I2PC likely due to the desorption of the formed Fg-I2PC complex and/or the penetration of Fg onto the I2PC film. The results show that the phase behavior at the liquid-polymer interface shall be taken into account for the surface behavior of bulk polymers surrounded by tissue. The ability of PEG units rearranging into a protein-blocking layer, rather than its mere presence in the polymer, is the key to antifouling characteristics desired for polymeric coating on insertion devices.

Synergistic Combination of Bioactive Hydroxyapatite Nanoparticles and the Chemotherapeutic Doxorubicin to Overcome Tumor Multidrug Resistance.

Multidrug resistance (MDR) is one of the biggest obstacles in cancer chemotherapy. Here, a remarkable reversal of MDR in breast cancer through the synergistic effects of bioactive hydroxyapatite nanoparticles (HAPNs) and doxorubicin (DOX) is shown. DOX loaded HAPNs (DHAPNs) exhibit a 150-fold reduction in IC50 compared with free DOX for human MDR breast cancer MCF-7/ADR cells, and lead to almost complete inhibition of tumor growth in vivo without obvious side effects of free DOX. This high efficacy and specificity could be attributed to multiple action mechanisms of HAPNs. In addition to acting as the conventional nanocarriers to facilitate the cellular uptake and retention of DOX in MCF-7/ADR cells, more importantly, drug-free HAPNs themselves are able to prevent drug being pumped out of MDR cells through targeting mitochondria to induce mitochondrial damage and inhibit ATP production and to trigger sustained mitochondrial calcium overload and apoptosis in MDR cancer cells while not affecting normal cells. The results demonstrate that this simple but versatile bioactive nanoparticle provides a practical approach to effectively overcome MDR.

Optical Biosensors for Virus Detection: Prospects for SARS-CoV-2/COVID-19.

The recent pandemic of the novel coronavirus disease 2019 (COVID-19) has caused huge worldwide disruption due to the lack of available testing locations and equipment. The use of optical techniques for viral detection has flourished in the past 15 years, providing more reliable, inexpensive, and accurate detection methods. In the current minireview, optical phenomena including fluorescence, surface plasmons, surface-enhanced Raman scattering (SERS), and colorimetry are discussed in the context of detecting virus pathogens. The sensitivity of a viral detection method can be dramatically improved by using materials that exhibit surface plasmons or SERS, but often this requires advanced instrumentation for detection. Although fluorescence and colorimetry lack high sensitivity, they show promise as point-of-care diagnostics because of their relatively less complicated instrumentation, ease of use, lower costs, and the fact that they do not require nucleic acid amplification. The advantages and disadvantages of each optical detection method are presented, and prospects for applying optical biosensors in COVID-19 detection are discussed.

Exosomes Secreted from Amniotic Membrane Contribute to Its Anti-Fibrotic Activity.

Amniotic membranes (AM) have anti-fibrotic activity. Exosomes (nano-sized vesicles) function as conduits for intercellular transfer and contain all the necessary components to induce the resolution of fibrosis. In this study, we tested the hypothesis that the anti-fibrotic activity of AM is mediated by exosomes. AM-derived exosomes or amniotic stromal cell-derived exosomes were isolated and characterized. Anti-fibrotic activity of exosomes was evaluated using human hepatic stellate cells (LX-2), an in vitro model of fibrosis. Exosomes isolated from AM tissue-conditioned media had an average size of 75 nm. Exosomes significantly inhibited the proliferation of TGFß1-activated LX-2 but had no effect on the proliferation of non-activated LX-2 cells. Exosomes also reduced the migration of LX-2 in a scratch wound assay. Furthermore, exosomes reduced the gene expression of pro-fibrotic markers such as COL1A1, ACTA, and TGFß1 in LX-2 cells. Interestingly, exosomes isolated from AM tissue under hypoxic conditions seemed to show a stronger anti-fibrotic activity than exosomes isolated from tissue under normoxic conditions. Exosomes released by in vitro cultured AM stromal cells were smaller in size compared with tissue exosomes and also showed anti-fibrotic activity on LX-2 cells. In conclusion, AM-tissue-released exosomes contribute to the anti-fibrotic activity of AM. This is the first report of isolation, characterization, and functional evaluation of exosomes derived from amniotic tissues with the direct comparison between tissue-derived exosomes and cultured cell-derived exosomes.

Thermal Processing of a Degradable Carboxylic Acid-Functionalized Polycarbonate into Scaffolds for Tissue Engineering.

Degradable polymers are often desirable for the fabrication of medical implants, but thermal processing of these polymers is a challenge. We describe here how these problems can be addressed by discussing the extrusion of fibers and injection molding of bone pins from a hydrolytically degradable tyrosine-derived polycarbonate. Our initial attempts produced fibers and pins with bubbles, voids, and discoloration, and resulted in the formation of large polymer plugs that seized screws and blocked extruder dies. The material and process parameters that contribute to these issues were investigated by studying the physical and chemical changes that occur during processing. Differential scanning calorimetry (DSC) scans and thermogravimetric analysis combined with IR (TGA-IR) analysis revealed the role of residual moisture and residual solvents that in conjunction with heat cause degradation and crosslinking as indicated by gel permeation chromatography (GPC). Rheology and melt-flow index measurements were useful in characterizing the extent of dependence of polymer viscosity on temperature and molecular weight. With these insights, we could process our polymer into fibers and rods by controlling residual moisture, time and temperature, and by adjusting processing parameters in real-time. The systematic approach described here is applicable to other degradable polymers that are difficult to process.

Porphyrin-Loaded TyroSpheres for the Intracellular Delivery of Drugs and Photoinduced Oxidant Species.

In order to understand the intracellular delivery of drugs and to improve the cell killing efficiency of photosensitizers (PSs) used in photodynamic therapy (PDT), we prepared TyroSphere nanoparticles, which are triblock polymer [poly(ethylene glycol)-block-oligo(desaminotyrosyltyrosine octyl ester suberate)-block-poly(ethylene glycol)] aggregates, loaded with amphiphilic porphyrins with either positive (CisDiMPyP) or negative (TPPS2a) charges. Their physicochemical and photochemical properties were investigated, as well as the efficiency and mechanism of PDT death in a cervical cancer cell line (HeLa). The photophysical properties of both PSs were improved when loaded in the nanocarrier, with a decrease in aggregation as well as an increase in the yield of singlet oxygen generation. The physical and chemical stability of TyroSphere nanoparticles allows them to enter cells and to promote the slow intracellular delivery of part of the PSs. Confocal steady-state and lifetime-resolved fluorescence imaging microscopy data showed that the released PSs are free to target their natural intracellular targets, which are mitochondria and lysosomes for CisDiMPyP and TPPS2a, respectively. The photodynamic efficiency of cell killing was increased considerably compared with the free PSs (∼3×), but the mechanism of cell death was the same as that of the free PSs, which are acute necro-apoptosis for CisDiMPyP and autophagy malfunction for TPPS2a, reflecting the specific damage in mitochondria and lysosomes, respectively. We are confident that TyroSpheres provide a novel and efficient platform to administrate PDT photosensitizers, as well as other drugs with intracellular targets.

Disassembly of Nanospheres with a PEG Shell upon Adsorption onto PEGylated Substrates.

Polymeric nanospheres have the ability to encapsulate drugs and are therefore widely used in drug delivery applications. Structural transformations that affect drug release from nanospheres are governed by the surrounding environment. To understand these effects, we investigated the adsorption behavior of three types of nanospheres onto model surfaces using quartz crystal microbalance with dissipation (QCM-D) and by atomic force microscopy (AFM). Substrates were prepared from polymers with different degrees of PEGylation (0, 1, and 15%). Nanospheres were prepared via self-assembly of block copolymers. Tyrosine-derived nanospheres are A-B-A triblock copolymers with methoxy poly(ethylene glycol) (PEG) as the A-blocks and an alternating copolymer of desaminotyrosyl-tyrosine octyl ester and suberic acid oligo(DTO-SA) as the B-block. On non-PEGylated substrates, these nanospheres assembled into a close-packed structure; on PEGylated substrates, the adsorbed nanospheres formed a continuous film, thinner than the size of the nanospheres suggesting unraveling of the PEG corona and disassembly of the nanospheres. Also, the adsorption was concentration-dependent, the final thickness being attained at exponentially longer times at lower concentrations. Such substrate- and concentration-dependent behavior was not observed with Pluronic F-127 and PEG-poly(caprolactone) (PCL) nanospheres. Since the essential difference among the three nanospheres is the composition of the core, we conclude that the core influences the adsorption characteristics of the nanospheres as a consequence of their disassembly upon adsorption. These results are expected to be useful in designing nanospheres for their efficient transport across vascular barriers and for delivering drugs to their targets.

Processed human amniotic fluid retains its antibacterial activity.

BACKGROUND: Human amniotic fluid (AF) contains numerous nutrients, trophic factors and defense proteins that provide a nurturing and protective environment for fetal development. Based on reports that AF has antibacterial, anti-inflammatory and regenerative properties, we designed a novel method to process AF for use in clinical care. METHODS: Six randomly selected lots of processed AF (pAF) were examined to determine whether they retained their antibacterial activity against a panel of wound-associated pathogens E. faecium, S. aureus, K. pneumoniae, A. baumannii, P. aeruginosa, and E. aerogenes (ESKAPE). To identify proteins in pAF that might be responsible for its antibacterial activity, three different lots of pAF were analyzed with quantitative cytokine arrays that consisted of 400 unique human proteins. One protein identified by microarrays, lactoferrin, and a second prominent antibacterial protein that was not identified by microarrays, lysozyme, were examined by depletion experiments to determine their contribution to the antibacterial activity of pAF. RESULTS: All six lots of pAF exhibited antibacterial activity against ESKAPE microorganisms, especially against the pathogens predominately found in chronic wounds (i.e. S. aureus and P. aeruginosa). Thirty-one of the peptides on the microarray were annotated as having antibacterial activity and 26 of these were detected in pAF. Cystatin C and lactoferrin were among the most highly expressed antibacterial proteins in pAF. Cystatin C and lactoferrin were confirmed by ELISA to be present in pAF along with lysozyme. Immunoprecipitation of lactoferrin and lysozyme reduced, but did not abolish the antibacterial activities of pAF. CONCLUSION: Our data demonstrate that pAF maintains antibacterial activity via the preservation of antibacterial proteins against a broad spectrum of wound-associated pathogens.

Adsorption of Fibrinogen and Fibronectin on Elastomeric Poly(butylene succinate) Copolyesters.

Proteins adsorbed onto biomaterial surfaces facilitate cell-material interactions, including adhesion and migration. Of particular importance are provisional matrix components, fibrinogen (Fg) and fibronectin (Fn), which play an important role in the wound-healing process. Here, to assess the potential of a series of elastomeric poly(butylene succinate) (PBS) copolymers for soft tissue engineering and regenerative medicine applications, we examined the adsorption of Fg and Fn. We prepared spin-coated thin films of the poly(butylene succinate) homopolymer and a series of elastomeric poly(butylene succinate) copolymers with butylene succinate (PBS, hard segment) to succinate-dimer linoleic diol unit (dilinoleic succinate (DLS), soft segments) weight ratios of 70:30, 60:40, and 50:50. X-ray diffraction was used to assess crystallinity, whereas the obtained thin films were characterized using a quartz crystal microbalance with dissipation monitoring (QCM-D) and atomic force microscopy. Protein adsorption was assessed using QCM-D, followed by data analysis using viscoelastic modeling. On all three copolymers, we observed robust adsorption of both key provisional matrix proteins. Importantly, for both proteins, viscoelastic modeling determined that the adlayers were 30-40 nm thick and had low shear modulus values (<25 kPa), thus indicating soft orientations (end-on for Fg) or conformations (open for Fn) of the hydrated proteins. Overall, our results are very encouraging, as they predict excellent cell adhesion and migration, key features enabling tissue integration of potential PBS-DLS scaffolds.

Temperature-Activated PEG Surface Segregation Controls the Protein Repellency of Polymers.

Poly(ethylene glycol) (PEG) is widely used to modulate the hydration states of biomaterials and is often applied to produce nonfouling surfaces. Here, we present X-ray scattering data, which show that it is the surface segregation of PEG, not just its presence in the bulk, that makes this happen by influencing the hydrophilicity of PEG-containing substrates. We demonstrate a temperature-dependent trigger that transforms a PEG-containing substrate from a protein-adsorbing to a protein-repelling state. On films of poly(desaminotyrosyl-tyrosine-co-PEG carbonate) with high (20 wt %) PEG content, in which very little protein adsorption is expected, quartz crystal microbalance data showed significant adsorption of fibrinogen and bovine serum albumin at 8 °C. The surface became protein-repellent at 37.5 °C. When the same polymer was iodinated, the polymer was protein-adsorbent, even when 37 wt % PEG was incorporated into the polymer backbone. This demonstrates that high PEG content by itself is not sufficient to repel proteins. By inhibiting phase separation either with iodine or by lowering the temperature, we show that PEG must phase-separate and bloom to the surface to create an antifouling surface. These results suggest an opportunity to design materials with high PEG content that can be switched from a protein-attractant to a protein-repellent state by inducing phase separation through brief exposure to temperatures above their glass transition temperature.