Photocatalytic Activity of Fibrous Ti/Ce Oxides Obtained by Hydrothermal Impregnation of Short Flax Fibers.

Fibrous Ti/Ce oxide photocatalysts were prepared for the first time by a biomimetic solution process using short flax fibers (flax straw processing waste) as a biotemplate. Titanium polyhydroxy complex solutions with 3% and 5% cerium were used as precursors. Flax fibers were impregnated in an autoclave under hydrothermal conditions. Ti/Ce oxides were obtained from the biotemplate by annealing at 600 °C. The photocatalytic activity of the Ti/Ce oxides was studied by the adsorption and decomposition of the dye rhodamine B under UV irradiation. The photocatalytic decomposition of the dye was 50% and 75% faster for Ti/Ce oxides with 3% and 5% Ce, respectively, than for the analogous undoped fibrous TiO2. The morphologies, textures, and structures of the photocatalysts were studied by scanning electron microscopy, low temperature N2 adsorption/desorption, UV-Vis spectroscopy, and X-ray and XPS analytical methods. It was shown that the introduction of Ce into the precursor solution increased the surface irregularity of the Ti/Ce oxide crystallites compared to pure TiO2. This effect scaled with the Ce concentration. Ce improved the UV light absorption of the material. The Ti/Ce oxides contained Ce4+/Ce3+ pairs that played an important role in redox processes and intensified the photocatalytic activity.

Quasi-2D Heisenberg Antiferromagnets [CuX(pyz)2](BF4) with X = Cl and Br.

Two Cu2+ coordination polymers [CuCl(pyz)2](BF4) 1 and [CuBr(pyz)2](BF4) 2 (pyz = pyrazine) were synthesized in the family of quasi two-dimensional (2D) [Cu(pyz)2]2+ magnetic networks. The layer connectivity by monatomic halide ligands results in significantly shorter interlayer distances. Structures were determined by single-crystal X-ray diffraction. Temperature-dependent X-ray diffraction of 1 revealed rigid [Cu(pyz)2]2+ layers that do not expand between 5 K and room temperature, whereas the expansion along the c-axis amounts to 2%. The magnetic susceptibility of 1 and 2 shows a broad maximum at ∼8 K, indicating antiferromagnetic interactions within the [Cu(pyz)2]2+ layers. 2D Heisenberg model fits result in J∥ = 9.4(1) K for 1 and 8.9(1) K for 2. The interlayer coupling is much weaker with | J⊥| = 0.31(6) K for 1 and 0.52(9) K for 2. The electron density, experimentally determined and calculated by density functional theory, confirms the location of the singly occupied orbital (the magnetic orbital) in the tetragonal plane. The analysis of the spin density reveals a mainly σ-type exchange through pyrazine. Kinks in the magnetic susceptibility indicate the onset of long-range three-dimensional magnetic order below 4 K. The magnetic structures were determined by neutron diffraction. Magnetic Bragg peaks occur below TN = 3.9(1) K for 1 and 3.8(1) K for 2. The magnetic unit cell is doubled along the c-axis ( k = 0, 0, 0.5). The ordered magnetic moments are located in the tetragonal plane and amount to 0.76(8) µB/Cu2+ for 1 and 0.6(1) µB/Cu2+ for 2 at 1.5 K. The moments are coupled antiferromagnetically both in the ab plane and along the c-axis. The Cu2+ g-tensor was determined from electron spin resonance spectra as g x = 2.060(1), g z = 2.275(1) for 1 and g x = 2.057(1), g z = 2.272(1) for 2 at room temperature.

On the Border between Low-Nuclearity and One-Dimensional Solids: A Unique Interplay of 1,2,4-Triazolyl-Based {CuII5(OH)2} Clusters and MoVI-Oxide Matrix.

A pentanuclear CuII5-hydroxo cluster possessing an unusual linear-shaped configuration was formed and crystallized under hydrothermal conditions as a result of the unique cooperation of bridging 1,2,4-triazole ligand ( trans-1,4-cyclohexanediyl-4,4'-bi(1,2,4-triazole) ( tr2 cy)), MoVI-oxide, and CuSO4. This structural motif can be rationalized by assuming in situ generation of {Cu2Mo6O22}4- anions, which represent heteroleptic derivatives of γ-type [Mo8O26]4- further interlinked by [Cu3(OH)2]4+ cations through [ N- N] bridges. The framework structure of the resulting compound [Cu5(OH)2( tr2 cy)2Mo6O22]·6H2O (1) is thus built up from neutral heterometallic {Cu5(OH)2Mo6O22} n layers pillared with tetradentate tr2 cy. Quantum-chemical calculations demonstrate that the exclusive site of the parent γ-[Mo8O26]4- cluster into which CuII inserts corresponds with the site that has the lowest defect ("MoO2 vacancy") formation energy, demonstrating how the local metal-polyoxomolybdate chemistry can express itself in the final crystal structure. Magnetic susceptibility measurements of 1 show strong antiferromagnetic coupling within the Cu5 chain with exchange parameters J1 = -500(40) K (-348(28) cm-1), J2 = -350(10) K (-243(7) cm-1) and g = 2.32(2), χ2 = 6.5 × 10-4. Periodic quantum-chemical calculations reproduce the antiferromagnetic character of 1 and connect it with an effective ligand-mediated spin coupling mechanism that comes about from the favorable structural arrangement between the Cu centers and the OH-, O2-, and tr2 cy bridging ligands.

Dinuclear Complexes Formed by Hydrogen Bonds: Synthesis, Structure and Magnetic and Electrochemical Properties.

The synthesis is reported of a series of homo- and hetero-dinuclear octahedral complexes of the ligand 1, 1,2-bis(1-methyl-benzimidazol-2-yl) ethanol, where the two metal centres are linked by hydrogen bonds between coordinated alcohols and coordinated alkoxides. Homonuclear divalent MII MII , mixed-valent MII MIII and heteronuclear MII M'III species are prepared. The complexes have been characterised by X-ray crystallography and show unusually short O⋅⋅⋅O distances for the hydrogen bonds. Magnetic measurements show the hydrogen-bond bridges can lead to ferromagnetic or antiferromagnetic coupling. The electrochemistry of the dinuclear species is significantly different from the mononuclear systems: the latter show irreversible waves in cyclic voltammograms as a result of the need to couple proton and electron transfer. The dinuclear species, in contrast, show reversible waves, which are attributed to rapid intramolecular proton transfer facilitated by the hydrogen-bonded structure.

Exploration of a Variety of Copper Molybdate Coordination Hybrids Based on a Flexible Bis(1,2,4-triazole) Ligand: A Look through the Composition-Space Diagram.

We investigated the coordination ability of the bis(1,2,4-triazolyl) module, tr2pr = 1,3-bis(1,2,4-triazol-4-yl)propane, toward the engineering of solid-state structures of copper polyoxomolybdates utilizing a composition space diagram approach. Different binding modes of the ligand including [N-N]-bridging and N-terminal coordination and the existence of favorable conformation forms (anti/anti, gauche/anti, and gauche/gauche) resulted in varieties of mixed metal CuI/MoVI and CuII/MoVI coordination polymers prepared under hydrothermal conditions. The composition space analysis employed was aimed at both the development of new coordination solids and their crystallization fields through systematic changes of the reagent ratios [copper(II) and molybdenum(VI) oxide precursors and the tr2pr ligand]. Nine coordination compounds were synthesized and structurally characterized. The diverse coordination architectures of the compounds are composed of cationic fragments such as [CuII3(µ2-OH)2(µ2-tr)2]4+, [CuII3(µ2-tr)6]6+, [CuII2(µ2-tr)3]4+, etc., connected to polymeric arrays by anionic species (molybdate MoO42-, isomeric α-, δ-, and ß-octamolybdates {Mo8O26}4- or {Mo8O28H2}6-). The inorganic copper(I,II)/molybdenum(VI) oxide matrix itself forms discrete or low-dimensional subtopological motifs (0D, 1D, or 2D), while the organic spacers interconnect them into higher-dimensional networks. The 3D coordination hybrids show moderate thermal stability up to 230-250 °C, while for the 2D compounds, the stability of the framework is distinctly lower (∼190 °C). The magnetic properties of the most representative samples were investigated. The magnetic interactions were rationalized in terms of analyzing the planes of the magnetic orbitals.

Composition Space Analysis in the Development of Copper Molybdate Hybrids Decorated by a Bifunctional Pyrazolyl/1,2,4-Triazole Ligand.

A bitopic ligand, 4-(3,5-dimethylpyrazol-4-yl)-1,2,4-triazole (Hpz-tr) (1), containing two different heterocyclic moieties was employed for the design of copper(II)-molybdate solids under hydrothermal conditions. In the multicomponent Cu(II)/Hpz-tr/Mo(VI) system, a diverse set of coordination hybrids, [Cu(Hpz-tr)2SO4]·3H2O (2), [Cu(Hpz-tr)Mo3O10] (3), [Cu4(OH)4(Hpz-tr)4Mo8O26]·6H2O (4), [Cu(Hpz-tr)2Mo4O13] (5), and [Mo2O6(Hpz-tr)]·H2O (6), was prepared and characterized. A systematic investigation of these systems in the form of a ternary crystallization diagram approach was utilized to show the influence of the molar ratios of starting reagents, the metal (Cu(II) and Mo(VI)) sources, the temperature, etc., on the reaction products outcome. Complexes 2-4 dominate throughout a wide crystallization range of the composition triangle, while the other two compounds 5 and 6 crystallize as minor phases in a narrow concentration range. In the crystal structures of 2-6, the organic ligand behaves as a short [N-N]-triazole linker between metal centers Cu···Cu in 2-4, Cu···Mo in 5, and Mo···Mo in 6, while the pyrazolyl function remains uncoordinated. This is the reason for the exceptional formation of low-dimensional coordination motifs: 1D for 2, 4, and 6 and 2D for 3 and 5. In all cases, the pyrazolyl group is involved in H bonding (H-donor/H-acceptor) and is responsible for π-π stacking, thus connecting the chain and layer structures in more complicated H-bonding architectures. These compounds possess moderate thermal stability up to 250-300 °C. The magnetic measurements were performed for 2-4, revealing in all three cases antiferromagnetic exchange interactions between neighboring Cu(II) centers and long-range order with a net moment below Tc of 13 K for compound 4.

Modeling blue to UV upconversion in ß-NaYF4:Tm3.

Samples of 0.01% and 0.3% Tm3+-doped ß-NaYF4 show upconverted UV luminescence at 27 660 cm-1 (361 nm) after blue excitation at 21 140 cm-1 (473 nm). Contradictory upconversion mechanisms in the literature are reviewed and two of them are investigated in detail. Their agreement with emission and two-color excitation experiments is examined and compared. Decay curves are analyzed using the Inokuti-Hirayama model, an average rate equation model, and a microscopic rate equation model that includes the correct extent of energy transfer. Energy migration is found to be negligible in these samples, and hence the average rate equation model fails to correctly describe the decay curves. The microscopic rate equation model accurately fits the experimental data and reveals the strength and multipolarity of various interactions. This microscopic model is able to determine the most likely upconversion mechanism.

Enhanced up-conversion for photovoltaics via concentrating integrated optics.

Concentrating optics are integrated into up-conversion photovoltaic (UC-PV) devices to independently concentrate sub-band-gap photons on the up-conversion layer, without affecting the full solar concentration on the overlying solar cell. The UC-PV devices consist of silicon solar cells optimized for up-conversion, coupled with tapered and parabolic dielectric concentrators, and hexagonal sodium yttrium fluoride (ß-NaYF4) up-converter doped with 25% trivalent erbium (Er³âº). A normalized external quantum efficiency of 1.75x10⁻² cm²/W and 3.38x10⁻² cm²/W was obtained for the UC-PV device utilizing tapered and parabolic concentrators respectively. Although low to moderate concentration was shown to maximize UC, higher concentration lead to saturation and reduced external quantum efficiency. The presented work highlights some of the implications associated with the development of UC-PV devices and designates a substantial step for integration in concentrating PV.

Tetracarboxylate ligands as new chelates supporting copper(II) paddlewheel-like structures.

Two new ligands N,N,N',N'-tetrakis(2-methylbenzoic acid)-1,4-diaminomethylbenzene, 5H4, and N,N,N',N'-tetrakis(2-methylbenzoic acid)-4,4'-diaminomethyldiphenyl, 6H4, carrying four carboxylate groups suitable for bridging dinuclear centers have been prepared and their paddlewheel complexes with copper(II) prepared. The phenyl-bridged ligand 5H4 gives a cyclic octanuclear species [(Cu2)4(5)4], while the diphenyl-bridged ligand 6H4 gives a lantern-like tetranuclear species [(Cu2)2(6)2]; both were characterized by X-ray crystallography. If the amine functions of 5 are protonated, intramolecular hydrogen bonds position the four carboxylates in such a way as to allow formation of the unusual compound [Cu4(5H2)2Cl](3+) in which a Cu4 square centered by a chloro ligand is sandwiched between two (5H2)(2-) ligands. The magnetic properties of this compound have been studied and show antiferromagnetic coupling between adjacent coppers (J = -33.7 cm(-1)).

Triazolyl-based copper-molybdate hybrids: from composition space diagram to magnetism and catalytic performance.

The multicomponent mixed-metal Cu(II)/Mo(VI) oxides/1,3-bis(1,2,4-triazol-4-yl)adamantane (tr2ad) system was thoroughly studied employing a compositional diagram approach. The concept allowed us to prepare three layered copper-molybdate hybrid solids [Cu(II)2(tr2ad)4](Mo8O26) (1), [Cu4(II)(µ4-O)(tr2ad)2(MoO4)3]·7.5H2O (2), and [Cu(I)2(tr2ad)2](Mo2O7)·H2O (3), and to elucidate the relationship between initial reagent concentration/stoichiometry and the stability of the resultant structural motifs. Compounds 1 and 2 were found to dominate throughout a wide crystallization range of the concentration triangle, whereas compound 3 was formed by redox processes in the narrow crystallization area having a high excess of Cu(OAc)2·H2O. Independent experiments carried out with Cu(OAc)2 and (NH4)6Mo7O24 in the absence of tr2ad, under the same conditions, revealed the formation of low-valent and bimetallic oxides, including Cu2O, MoO2, Cu(Mo3O10)·H2O, and Cu3(MoO4)2(OH)2. Compounds 1 and 2 show high thermal and chemical stability as examined as catalysts in the epoxidation of cis-cyclooctene and the oxidation of benzyl alcohol (BzOH) with different types of oxidants. The oxidation reaction of BzOH using tert-butyl hydroperoxide (TBHP) as the oxidant, in the presence of 1 or 2, led to benzaldehyde and benzoic acid (PhCO2H), with the latter being formed in up to 90% yield at 24 h. The results suggest that 1 and 2 may be favorable heterogeneous catalysts for the synthesis of PhCO2H. Whereas compound 1 only reveals a weak ferromagnetic coupling between neighboring Cu(II) centers (J = 0.41 cm(-1)), compound 2 shows distinct intracluster antiferromagnetic exchange interactions (J = -29.9 cm(-1), J' = -25.7 cm(-1)), which consequently results in a diamagnetic ground state.

Plasmon enhanced upconversion luminescence near gold nanoparticles--simulation and analysis of the interactions: errata.

The procedure used in our previous publication [Opt. Express 20, 271, (2012)] to calculate how coupling to a spherical gold nanoparticle changes the upconversion luminescence of Er(3+) ions contained several errors. The errors are corrected here.

Functionalized adamantane tectons used in the design of mixed-ligand copper(II) 1,2,4-triazolyl/carboxylate metal-organic frameworks.

Bistriazoles, 1,3-bis(1,2,4-triazol-4-yl)propane (tr(2)pr) and 1,3-bis(1,2,4-triazol-4-yl)adamantane (tr(2)ad), were examined in combination with the rigid tetratopic 1,3,5,7-adamantanetetracarboxylic acid (H(4)-adtc) platform for the construction of neutral heteroleptic copper(II) metal-organic frameworks. Two coordination polymers, [{Cu(4)(OH)(2)(H(2)O)(2)}{Cu(4)(OH)(2)}(tr(2)pr)(2)(H-adtc)(4)]·2H(2)O (1) and [Cu(4)(OH)(2)(tr(2)ad)(2)(H-adtc)(2)(H(2)O)(2)]·3H(2)O (2), were synthesized and structurally characterized. In complexes 1 and 2, the N(1),N(2)-1,2,4-triazolyl (tr) and µ(3)-OH(-) groups serve as complementary bridges between adjacent metal centers supporting the tetranuclear dihydroxo clusters. The structure of 1 represents a unique association of two different kinds of centrosymmetrical {Cu(4)(OH)(2)} units in a tight 3D framework, while in compound 2, another configuration type of acentric tetranuclear metal clusters is organized in a layered 3,6-hexagonal motif. In both cases, the {Cu(4)(OH)(2)} secondary building block and trideprotonated carboxylate H-adtc(3-) can be viewed as covalently bound six- and three-connected nodes that define the net topology. The tr ligands, showing µ(3)- or µ(4)-binding patterns, introduce additional integrating links between the neighboring {Cu(4)(OH)(2)} fragments. A variable-temperature magnetic susceptibility study of 2 demonstrates strong antiferromagnetic intracluster coupling (J(1) = -109 cm(-1) and J(2) = -21 cm(-1)), which combines for the bulk phase with a weak antiferromagnetic intercluster interaction (zj = -2.5 cm(-1)).

Unprecedented trapping of difluorooctamolybdate anions within an α-polonium type coordination network.

New fluorinated hybrid solids [Mo2F2O5(tr2pr)] (1), [Co3(tr2pr)2(MoO4)2F2]·7H2O (2), and [Co3(H2O)2(tr2pr)3(Mo8O26F2)]·3H2O (3) (tr2pr = 1,3-bis(1,2,4-triazol-4-yl)propane) were prepared from the reaction systems consisting of Co(OAc)2/CoF2 and MoO3/(NH4)6Mo7O24, as Co(II) and Mo(VI) sources, in water (2) or in aqueous HF (1, 3) employing mild hydrothermal conditions. The tr2pr ligand serves as a conformationally flexible tetradentate donor. In complex 1, the octahedrally coordinated Mo atoms are linked in the discrete corner-sharing {Mo2(µ2-O)F2O4N4} unit in which a pair of tr-heterocycles (tr = 1,2,4-triazole) is arranged in cis-positions opposite to "molybdenyl" oxygen atoms. The anti-anti conformation type of tr2pr facilitates the tight zigzag chain packing motif. The crystal structure of the mixed-anion complex salt 2 consists of trinuclear [Co3(µ3-MoO4)2(µ2-F)2] units self-assembling in Co(II)-undulating chains (Co···Co 3.0709(15) and 3.3596(7) Å), which are cross-linked by tr2pr in layers. In 3, containing condensed oxyfluoromolybdate species, linear centrosymmetric [Co3(µ2-tr)6](6+) SBUs are organized at distances of 10.72-12.45 Å in an α-Po-like network using bitopic tr-linkers. The octahedral {N6} and {N3O3} environments of the central and peripheral cobalt atoms, respectively, are filled by triazole N atoms, water molecules, and coordinating [Mo8O26F2](6-) anions. Acting as a tetradentate O-donor, each difluorooctamolybdate anion anchors four [Co3(µ2-tr)6](6+) units through their peripheral Co-sites, which consequently leads to a novel type of a two-nodal 4,10-c net with the Schläfli symbol {3(2).4(3).5}{3(4).4(20).5(16).6(5)}. The 2D and 3D coordination networks of 2 and 3, respectively, are characterized by significant overall antiferromagnetic exchange interactions (J/k) between the Co(II) spin centers on the order of -8 and -4 K. The [Mo8O26F2](6-) anion is investigated in detail by quantum chemical calculations.

Avoiding concentration quenching and self-absorption in Cs4EuX6 (X = Br, I) by Sm2+ doping.

The benefits of doping Cs4EuBr6 and Cs4EuI6 with Sm2+ are studied for near-infrared scintillator applications. It is shown that undoped Cs4EuI6 suffers from a high probability of self-absorption, which is almost completely absent in Cs4EuI6:2% Sm. Sm2+ doping is also used to gain insight in the migration rate of Eu2+ excitations in Cs4EuBr6 and Cs4EuI6, which shows that concentration quenching is weak, but still significant in the undoped compounds. Both self-absorption and concentration quenching are linked to the spectral overlap of the Eu2+ excitation and emission spectra which were studied between 10 K and 300 K. The scintillation characteristics of Cs4EuI6:2% Sm is compared to that of the undoped samples. An improvement of energy resolution from 11% to 7.5% is found upon doping Cs4EuI6 with 2% Sm and the scintillation decay time shortens from 4.8 s to 3.5 s in samples of around 3 mm in size.

Scintillation and Optical Characterization of CsCu2I3 Single Crystals from 10 to 400 K.

Currently only Eu2+-based scintillators have approached the light yield needed to improve the 2% energy resolution at 662 keV of LaBr3:Ce3+,Sr2+. Their major limitation, however, is the significant self-absorption due to Eu2+. CsCu2I3 is an interesting new small band gap scintillator. It is nonhygroscopic and nontoxic, melts congruently, and has an extremely low afterglow, a density of 5.01 g/cm3, and an effective atomic number of 50.6. It shows self-trapped exciton emission at room temperature. The large Stokes shift of this emission ensures that this material is not sensitive to self-absorption, tackling one of the major problems of Eu2+-based scintillators. An avalanche photo diode, whose optimal detection efficiency matches the 570 nm mean emission wavelength of CsCu2I3, was used to measure pulse height spectra. From the latter, a light yield of 36 000 photons/MeV and energy resolution of 4.82% were obtained. The scintillation proportionality of CsCu2I3 was found to be on par with that of SrI2:Eu2+. Based on temperature-dependent emission and decay measurements, it was demonstrated that CsCu2I3 emission is already about 50% quenched at room temperature. Using temperature-dependent pulse height measurements, it is shown that the light yield can be increased up to 60 000 photons/MeV by cooling to 200 K, experimentally demonstrating the scintillation potential of CsCu2I3. Below this temperature, the light yield starts to decrease, which can be linked to the unusually large increase in the band gap energy of CsCu2I3.

Ultra-high photoluminescent quantum yield of ß-NaYF4: 10% Er3+ via broadband excitation of upconversion for photovoltaic devices.

The upconversion photoluminescent quantum yield (PLQY) of erbium-doped hexagonal sodium yttrium fluoride (ß-NaYF(4): 10% Er(3+)) was measured under broadband excitation with full width half maxima ranging from 12 to 80 nm. A novel method was developed to increase the bandwidth of excitation, while remaining independent of power via normalization to the air mass 1.5 direct solar spectrum. The measurements reveal that by broadening the excitation spectrum a higher PLQY can be achieved at lower solar concentrations. The highest PLQY of 16.2 ± 0.5% was achieved at 2270 ± 100 mW mm(-2) and is the highest ever measured.

Ultra-high photoluminescent quantum yield of ß-NaYF4: 10% Er3+ via broadband excitation of upconversion for photovoltaic devices.

The upconversion photoluminescent quantum yield (PLQY) of erbium-doped hexagonal sodium yttrium fluoride (ß-NaYF(4): 10% Er(3+) was measured under broadband excitation with full width half maxima ranging from 12 to 80 nm. A novel method was developed to increase the bandwidth of excitation, while remaining independent of power via normalization to the air mass 1.5 direct solar spectrum. The measurements reveal that by broadening the excitation spectrum a higher PLQY can be achieved at lower solar concentrations. The highest PLQY of 16.2 ± 0.5% was achieved at 2270 ± 100 mW mm(-2) and is the highest ever measured.

Plasmon enhanced upconversion luminescence near gold nanoparticles-simulation and analysis of the interactions.

We investigate plasmon resonances in gold nanoparticles to enhance the quantum yield of upconverting materials. For this purpose, we use a rate equation model that describes the upconversion of trivalent erbium based upconverters. Changes of the optical field acting on the upconverter and the changes to the transition probabilities of the upconverter in the proximity of a gold nanoparticle are calculated using Mie theory and exact electrodynamic theory respectively. With this data, the influence on the luminescence of the upconverter is determined using the rate equation model. The results show that upconversion luminescence can be increased in the proximity of a spherical gold nanoparticle due to the change in the optical field and the modification of the transition rates.

Synthesis, structure, and properties of the new mixed-valent dodecahalogenotrimetallate In4Ti3Br12 and its relation to compounds A3Ti2X9 (A = K, In; X = Cl, Br).

Black single crystals of the new dodecahalogenotrimetallate In(4)Ti(3)Br(12) were obtained by reacting InBr(3) with Ti-wire at 450 °C in a silica tube sealed under vacuum. In(4)Ti(3)Br(12) (Pearson symbol hR57, space group R3m, Z = 3, a = 7.3992(8) Å, c = 36.673(6) Å, 643 refl., 25 param., R(1)(F) = 0.025; wR(2)(F(2)) = 0.046) is a defect variant of a 12 L-perovskite. In(+) cations are 12-fold coordinated in two different ways: In1 as an anticuboctahedron and In2 as a cuboctahedron. In both cases the 5s(2) configuration results in 3 short, 6 medium, and 3 long In-Br distances which might be explained as lone pair effect or second order Jahn-Teller instability. Furthermore there are isolated linear trimers [Ti(3)Br(12)](4-) consisting of facesharing octahedra similar to [Ru(3)Cl(12)](4-). The [Ti(3)Br(12)](4-)-unit has to be described as a mixed-valent d(1)-d(2)-d(1) system. According to magnetic measurements, the Ti-atoms in In(4)Ti(3)Br(12) show strong antiferromagnetic interactions (Θ = -1216(6) K) which might be addressed as weak Ti(3+)-Ti(2+)-Ti(3+) bonds. For comparison, single crystals of K(3)Ti(2)X(9) (X = Cl, Br) were synthesized and their structures refined. The rotation of the Ti(2)X(9)(3-) dimers reduced the symmetry of the well-known Cs(3)Cr(2)Cl(9) type from P6(3)/mmc to P6(3)/m and resulted in the formation of merohedral twins. According to the unit cell volumes In(+) is smaller than K(+) in all cases.

[V16O38(CN)]9­: a soluble mixed-valence redox-active building block with strong antiferromagnetic coupling.

A new discrete [V(16)O(38)(CN)](9-) cluster, which displays the hitherto unknown 8- charge on the cluster shell and is the first to encapsulate the cyanide anion, has been synthesized and characterized by IR and UV/vis/near-IR spectroscopy, electrochemistry, and magnetic susceptibility measurements. Bond valence sum calculations conducted on the basis of the crystal structure analysis of K(9)[V(16)O(38)(CN)]·13H(2)O confirm that this new member of the polyoxovanadate series is a mixed-valence complex. The intervalence charge transfer bands arising from intrametal interactions reveal that a localized (class II) assignment is appropriate for the cluster; however, a small degree of electronic delocalization is present. Interesting possibilities exist for the incorporation of this unit into higher dimensionality framework structures, where the redox, optical, and magnetic properties can be exploited and tuned.