Self-Powered Pressure-Temperature Bimodal Sensing Based on the Piezo-Pyroelectric Effect for Robotic Perception.

Multifunctional sensors have played a crucial role in constructing high-integration electronic networks. Most of the current multifunctional sensors rely on multiple materials to simultaneously detect different physical stimuli. Here, we demonstrate the large piezo-pyroelectric effect in ferroelectric Pb(Mg1/3Nb2/3)O3-PbTiO3 (PMN-PT) single crystals for simultaneous pressure and temperature sensing. The outstanding piezoelectric and pyroelectric properties of PMN-PT result in rapid response speed and high sensitivity, with values of 46 ms and 28.4 nA kPa-1 for pressure sensing, and 1.98 s and 94.66 nC °C-1 for temperature detection, respectively. By leveraging the distinct differences in the response speed of piezoelectric and pyroelectric responses, the piezo-pyroelectric effect of PMN-PT can effectively detect pressure and temperature from mixed-force thermal stimuli, which enables a robotic hand for stimuli classification. With appealing multifunctionality, fast speed, high sensitivity, and compact structure, the proposed self-powered bimodal sensor therefore holds significant potential for high-performance artificial perception.

Progress in Advanced Infrared Optoelectronic Sensors.

Infrared optoelectronic sensors have attracted considerable research interest over the past few decades due to their wide-ranging applications in military, healthcare, environmental monitoring, industrial inspection, and human-computer interaction systems. A comprehensive understanding of infrared optoelectronic sensors is of great importance for achieving their future optimization. This paper comprehensively reviews the recent advancements in infrared optoelectronic sensors. Firstly, their working mechanisms are elucidated. Then, the key metrics for evaluating an infrared optoelectronic sensor are introduced. Subsequently, an overview of promising materials and nanostructures for high-performance infrared optoelectronic sensors, along with the performances of state-of-the-art devices, is presented. Finally, the challenges facing infrared optoelectronic sensors are posed, and some perspectives for the optimization of infrared optoelectronic sensors are discussed, thereby paving the way for the development of future infrared optoelectronic sensors.

Microstructure Formation and Mechanical Properties of Metastable Titanium-Based Gradient Coating Fabricated via Intense Pulse Ion Beam Melt Mixing.

The unique flash heating characteristics of intense pulsed ion beams (IPIB) offer potential advantages to fabricate high-performance coatings with non-equilibrium structures. In this study, titanium-chromium (Ti-Cr) alloy coatings are prepared through magnetron sputtering and successive IPIB irradiation, and the feasibility of IPIB melt mixing (IPIBMM) for a film-substrate system is verified via finite elements analysis. The experimental results reveal that the melting depth is 1.15 µm under IPIB irradiation, which is in close agreement with the calculation value (1.18 µm). The film and substrate form a Ti-Cr alloy coating by IPIBMM. The coating has a continuous gradient composition distribution, metallurgically bonding on the Ti substrate via IPIBMM. Increasing the IPIB pulse number leads to more complete element mixing and the elimination of surface cracks and craters. Additionally, the IPIB irradiation induces the formation of supersaturated solid solutions, lattice transition, and preferred orientation change, contributing to an increase in hardness and a decrease in elastic modulus with continuous irradiation. Notably, the coating treated with 20 pulses demonstrates a remarkable hardness (4.8 GPa), more than twice that of pure Ti, and a lower elastic modulus (100.3 GPa), 20% less than that of pure Ti. The analysis of the load-displacement curves and H-E ratios indicates that the Ti-Cr alloy coated samples exhibit better plasticity and wear resistance compared to pure Ti. Specifically, the coating formed after 20 pulses exhibits exceptional wear resistance, as demonstrated by its H3/E2 value being 14 times higher than that of pure Ti. This development provides an efficient and eco-friendly method for designing robust-adhesion coatings with specific structures, which can be extended to various bi- or multi-element material systems.

Commissioning dose computation model for proton source in pencil beam scanning therapy by convolution neural networks.

Objective. Proton source model commissioning (PSMC) is critical for ensuring accurate dose calculation in pencil beam scanning (PBS) proton therapy using Monte Carlo (MC) simulations. PSMC aims to match the calculated dose to the delivered dose. However, commissioning the 'nominal energy' and 'energy spread' parameters in PSMC can be challenging, as these parameters cannot be directly obtained from solving equations. To efficiently and accurately commission the nominal energy and energy spread in a proton source model, we developed a convolution neural network (CNN) named 'PSMC-Net.'Methods. The PSMC-Net was trained separately for 33 energies (E, 70-225 MeV with a step of 5 MeV plus 226.09 MeV). For eachE, a dataset was generated consisting of 150 source model parameters (15 nominal energies ∈ [E,E+ 1.5 MeV], ten spreads ∈ [0, 1]) and the corresponding 150 MC integrated depth doses (IDDs). Of these 150 data pairs, 130 were used for training the network, 10 for validation, and 10 for testing.Results. The source model, built by 33 measured IDDs and 33 PSMC-Nets (cost 0.01 s), was used to compute the MC IDDs. The gamma passing rate (GPRs, 1 mm/1%) between MC and measured IDDs was 99.91 ± 0.12%. However, when no commissioning was made, the corresponding GPR was reduced to 54.11 ± 22.36%, highlighting the tremendous significance of our CNN commissioning method. Furthermore, the MC doses of a spread-out Bragg peak and 20 patient PBS plans were also calculated, and average 3D GPRs (2 mm/2% with a 10% threshold) were 99.89% and 99.96 ± 0.06%, respectively.Significance. We proposed a nova commissioning method of the proton source model using CNNs, which made the PSMC process easy, efficient, and accurate.

Prevention and Nursing Research of PICC Catheter-Related Complications in Patients with Digestive System Malignant Tumor Based on Smart Medical Block Chain.

Malignant tumors of digestive system mainly include gastric cancer, colorectal cancer, and esophageal cancer, which generally need chemotherapy. PICC refers to peripherally inserted central venous catheter, which plays an important role in the treatment of malignant tumor patients with chemotherapy, and it has the characteristics of high success rate of puncture and reducing the pain of patients. Its principle is to use PICC catheter for drug delivery, which can effectively reduce the pain of tumor patients for multiple puncture, and also can avoid drug extravasation or local stimulation of drugs. However, PICC catheter-related complications cannot be ignored, to some extent, directly affect the treatment effect of patients, and increase the pain and burden of patients. Therefore, this paper proposes a study of PICC catheter-related complications and protective nursing for patients with digestive system cancer based on smart medical block chain. First of all, using the method of literature, this paper deeply studied the combination of smart medicine and block chain and further strengthened the research on PICC catheter-related complications. Based on this, we designed a study on the prevention and nursing of PICC catheter-related complications in patients with digestive system cancer. Before the implementation of nursing, the incidence of complications in patients with digestive system cancer was 17.35%; after the implementation of nursing, the incidence of complications decreased to 4.08%. The purpose of this study is to analyze the causes through clinical research and put forward the protective nursing measures of related diseases, so as to reduce the incidence of PICC-related complications.

High Transient-Thermal-Shock Resistant Nanochannel Tungsten Films.

Developing high-performance tungsten plasma-facing materials for fusion reactors is an urgent task. In this paper, novel nanochannel structural W films prepared by magnetron sputtering deposition were irradiated using a high-power pulsed electron beam or ion beam to study their edge-localized modes, such as transient thermal shock resistance. Under electron beam irradiation, a 1 µm thick nanochannel W film with 150 watt power showed a higher absorbed power density related cracking threshold (0.28-0.43 GW/m2) than the commercial bulk W (0.16-0.28 GW/m2) at room temperature. With ion beam irradiation with an energy density of 1 J/cm2 for different pulses, the bulk W displayed many large cracks with the increase of pulse number, while only micro-crack networks with a width of tens of nanometers were found in the nanochannel W film. For the mechanism of the high resistance of nanochannel W films to transient thermal shock, a residual stress analysis was made by Grazing-incidence X-ray diffraction (GIXRD), and the results showed that the irradiated nanochannel W films had a much lower stress than that of the irradiated bulk W, which indicates that the nanochannel structure can release more stress, due to its special nanochannel structure and ability for the annihilation of irradiation induced defects.

Infrared imaging diagnostics for intense pulsed electron beam.

Infrared imaging diagnostic method for two-dimensional calorimetric diagnostics has been developed for intense pulsed electron beam (IPEB). By using a 100-µm-thick tungsten film as the infrared heat sink for IPEB, the emitting uniformity of the electron source can be analyzed to evaluate the efficiency and stability of the diode system. Two-dimensional axisymmetric finite element method heat transfer simulation, combined with Monte Carlo calculation, was performed for error estimation and optimization of the method. The test of the method was finished with IPEB generated by explosive emission electron diode with pulse duration (FWHM) of 80 ns, electron energy up to 450 keV, and a total beam current of over 1 kA. The results showed that it is possible to measure the cross-sectional energy density distribution of IPEB with energy sensitivity of 0.1 J/cm(2) and spatial resolution of 1 mm. The technical details, such as irradiation protection of bremsstrahlung γ photons and the functional extensibility of the method were discussed in this work.