Prostate-specific membrane antigen-directed nanoparticle targeting for extreme nearfield ablation of prostate cancer cells.

Almost all biological therapeutic interventions cannot overcome neoplastic heterogeneity. Physical ablation therapy is immune to tumor heterogeneity, but nearby tissue damage is the limiting factor in delivering lethal doses. Multi-walled carbon nanotubes offer a number of unique properties: chemical stability, photonic properties including efficient light absorption, thermal conductivity, and extensive surface area availability for covalent chemical ligation. When combined together with a targeting moiety such as an antibody or small molecule, one can deliver highly localized temperature increases and cause extensive cellular damage. We have functionalized multi-walled carbon nanotubes by conjugating an antibody against prostate-specific membrane antigen. In our in vitro studies using prostate-specific membrane antigen-positive LNCaP prostate cancer cells, we have effectively demonstrated cell ablation of >80% with a single 30-s exposure to a 2.7-W, 532-nm laser for the first time without bulk heating. We also confirmed the specificity and selectivity of prostate-specific membrane antigen targeting by assessing prostate-specific membrane antigen-null PC3 cell lines under the same conditions (<10% cell ablation). This suggests that we can achieve an extreme nearfield cell ablation effect, thus restricting potential tissue damage when transferred to in vivo clinical applications. Developing this new platform will introduce novel approaches toward current therapeutic modalities and will usher in a new age of effective cancer treatment squarely addressing tumoral heterogeneity.

Real time plasmonic qPCR: how fast is ultra-fast? 30 cycles in 54 seconds.

Polymerase Chain Reaction (PCR) is a critical tool for biological research investigators but recently it also has been making a significant impact in clinical, veterinary and agricultural applications. Plasmonic PCR, which employs the very efficient heat transfer of optically irradiated metallic nanoparticles, is a simple and powerful methodology to drive PCR reactions. The scalability of next generation plasmonic PCR technology will introduce various forms of PCR applications ranging from small footprint portable point of care diagnostic devices to large footprint central laboratory multiplexing devices. In a significant advance, we have introduced a real time plasmonic PCR and explored the ability of ultra-fast cycling compatible with both label-free and fluorescence-based monitoring of amplicon production. Furthermore, plasmonic PCR has been substantially optimized to now deliver a 30 cycle PCR in 54 seconds, with a detectable product. The advances described here will have an immediate impact on the further development of the use of plasmonic PCR playing a critical role in rapid point of care diagnostics.

Hyperbolic metamaterial-based near-field thermophotovoltaic system for hundreds of nanometer vacuum gap.

Artificially designed hyperbolic metamaterial (HMM) possesses extraordinary electromagnetic features different from those of naturally existing materials. In particular, the dispersion relation of waves existing inside the HMM is hyperbolic rather than elliptical; thus, waves that are evanescent in isotropic media become propagating in the HMM. This characteristic of HMMs opens a novel way to spectrally control the near-field thermal radiation in which evanescent waves in the vacuum gap play a critical role. In this paper, we theoretically investigate the performance of a near-field thermophotovoltaic (TPV) energy conversion system in which a W/SiO2-multilayer-based HMM serves as the emitter at 1000 K and InAs works as the TPV cell at 300 K. By carefully designing the thickness of constituent materials of the HMM emitter, the electric power of the near-field TPV devices can be increased by about 6 times at 100-nm vacuum gap as compared to the case of the plain W emitter. Alternatively, in regards to the electric power generation, HMM emitter at experimentally achievable 100-nm vacuum gap performs equivalently to the plain W emitter at 18-nm vacuum gap. We show that the enhancement mechanism of the HMM emitter is due to the coupled surface plasmon modes at multiple metal-dielectric interfaces inside the HMM emitter. With the minority carrier transport model, the optimal p-n junction depth of the TPV cell has also been determined at various vacuum gaps.

Graphene-assisted Si-InSb thermophotovoltaic system for low temperature applications.

The present work theoretically analyzes the performance of the near-field thermophotovoltaic (TPV) energy conversion device for low temperature applications (Tsource ∼ 500 K). In the proposed TPV system, doped Si is employed as the source because its optical property can be readily tuned by changing the doping concentration, and InSb is selected as a TPV cell because of its low bandgap energy (0.17 eV). In order to enhance the near-field thermal radiation between the source and the TPV cell, monolayer of graphene is coated on the cell side so that surface plasmon can play a critical role in heat transfer. It is found that monolayer of graphene can significantly enhance the power throughput by 30 times and the conversion efficiency by 6.1 times compared to the case without graphene layer. The resulting maximum conversion efficiency is 19.4% at 10-nm vacuum gap width.

Selective Laser Direct Patterning of Silver Nanowire Percolation Network Transparent Conductor for Capacitive Touch Panel.

We introduce a facile method to enhance the functionality of a patterned metallic transparent conductor through selective laser ablation of metal nanowire percolation network. By scanning focused nanosecond pulsed laser on silver nanowire percolation network, silver nanowires are selectively ablated and patterned without using any conventional chemical etching or photolithography steps. Various arbitrary patterns of silver nanowire transparent conductors are readily created on the percolation network by changing various laser parameters such as repetition rate and power. The macroscopic optical and electrical properties of the percolation network transparent conductor can be easily tuned by changing the conductor pattern design via digital selective laser ablation. Further investigation on the silver nanowire based electrode line prepared by the ablation process substantiates that the general relation for a conducting thin film fails at a narrow width, which should be considered for the applications that requires a high resolution patterns. Finally, as a proof of concept, a capacitive touch sensor with diamond patterns has been demonstrated by selective laser ablation of metal nanowire percolation network.

Highly transparent privacy filter film with image distortion.

We present a novel privacy filter film with transparent micro-cuboid arrays. The privacy filter film, which does not include any opaque materials, rarely affects the normal transparency, whereas it obscures personal information by distorting paths of oblique light rays. The effects of the cuboid size and a gap between the privacy filter and a display are analyzed using a ray-tracing program. The analysis is consistent with the experimental results carried out using the poly-dimethylsiloxane (PDMS) micro-cuboid (100 µm × 100 µm × 200 µm) arrays, which are fabricated by lithography and transfer molding.

Thermoelectric Sensor with CuI Supported on Rough Glass.

Thermoelectric generators convert heat into a potential difference with arrays of p- and n-type materials, a process that allows thermal energy harvesting and temperature detection. Thermoelectric sensors have attracted interest in relation to the creation of temperature and combustible gas sensors due to their simple operation principle and self-powering ability. CuI is an efficient p-type thermoelectric material that can be readily produced from a Cu layer by an iodination method. However, the vapor iodination of Cu has the disadvantage of weak adhesion on a bare glass substrate due to stress caused by crystal growth, limiting microfabrication applications of this process. This work presents a rough soda-lime glass substrate with nanoscale cavities to support the growth of a CuI layer, showing good adhesion and enhanced thermoelectric sensitivity. A rough glass sample with nanocavities is developed by reactive ion etching of a photoresist-coated glass sample in which aggregates of carbon residuals and the accumulation of NaF catalyze variable etching rates to produce local isotropic etching and roughening. A thermoelectric sensor consists of 41 CuI/In-CoSb3 thermoelectric leg pairs with gold electrodes for electrical interconnection. A thermoelectric leg has a width of 25 µm, a length of 3 mm, and a thickness of 1 µm. The thermoelectric response results in an open-circuit voltage of 13.7 mV/K on rough glass and 0.9 mV/K on bare glass under ambient conditions. Rough glass provides good mechanical interlocking and introduces important variations of the crystallinity and composition in the supported thermoelectric layers, leading to enhanced thermopower.

Plane heating with a transparent heater film in a fish tank.

The water temperature in a fish tank is important for fish health. A conventional aquarium heater produces localized heating that causes water temperature variation, resulting in thermal stress to fish. This study presents plane heating with a transparent heater film that is aesthetically attractive when applied to fish tanks. The transparent heater film comprises a metal mesh with an optical transparency of 81 %, sheet resistance of 0.6 Ω/□, and mean heating surface temperature of 57 °C at 20 W. In the test setup, 100 W is applied to compare an aquarium heater and a transparent heater film. Increasing the water temperature from 23 °C to 24 °C at the center of the fish tank needs 28 min with the transparent heater film operating at 33 °C, whereas the same temperature increase needs 50 min with an aquarium heater operating at 49 °C. The planar heater thus results in enhanced heat diffusion and reduced water temperature variation due to its extended heating surface area.

Assessment of immunopathological responses of a novel non-chemical biocide in C57BL/6 for safe disinfection usage.

BACKGROUND: Water electrospray technology has been developed and extensively studied for its physical properties and potential application as a non-chemical biocide against airborne pathogens. However, there are still concerns regarding the safety and potential toxicity of inhaling water electrospray (WE) particles. To address these potential hazards and offer insights into the impact of WE on humans, we analyzed the immunopathological response to WE by employing an intranasal challenge C57BL/6 mouse model. This analysis aimed to compare the effects of WE with those of sodium hypochlorite (SH), a well-known biocidal agent. RESULTS: The study findings suggest that the WE did not trigger any pathological immune reactions in the intranasal-challenged C57BL/6 mouse model. Mice challenged with WE did not experience body weight loss, and there was no increase in inflammatory cytokine production compared to SH-treated mice. Histopathological analysis revealed that WE did not cause any damage to the lung tissue. In contrast, mice treated with SH exhibited significant lung tissue damage, characterized by the infiltration of neutrophils and eosinophils. Transcriptomic analysis of lung tissue further confirmed the absence of a pathological immune response in mice treated with WE compared to those treated with SH. Upon intranasal challenge with WE, the C57BL/6 mouse model did not show any evidence of immunopathological damage. CONCLUSIONS: The results of this study suggest that WE is a safe technology for disinfecting airborne pathogens. It demonstrated little to no effect on immune system activation and pathological outcomes in the intranasal challenge C57BL/6 mouse model. These findings not only support the potential use of WE as an effective and safe method for air disinfection but also highlight the value of the intranasal challenge of the C57BL/6 mouse model in providing significant immunopathological insights for assessing the inhalation of novel materials for potential use.

Switching terahertz waves with gate-controlled active graphene metamaterials.

The extraordinary electronic properties of graphene provided the main thrusts for the rapid advance of graphene electronics. In photonics, the gate-controllable electronic properties of graphene provide a route to efficiently manipulate the interaction of photons with graphene, which has recently sparked keen interest in graphene plasmonics. However, the electro-optic tuning capability of unpatterned graphene alone is still not strong enough for practical optoelectronic applications owing to its non-resonant Drude-like behaviour. Here, we demonstrate that substantial gate-induced persistent switching and linear modulation of terahertz waves can be achieved in a two-dimensional metamaterial, into which an atomically thin, gated two-dimensional graphene layer is integrated. The gate-controllable light-matter interaction in the graphene layer can be greatly enhanced by the strong resonances of the metamaterial. Although the thickness of the embedded single-layer graphene is more than six orders of magnitude smaller than the wavelength (<λ/1,000,000), the one-atom-thick layer, in conjunction with the metamaterial, can modulate both the amplitude of the transmitted wave by up to 47% and its phase by 32.2° at room temperature. More interestingly, the gate-controlled active graphene metamaterials show hysteretic behaviour in the transmission of terahertz waves, which is indicative of persistent photonic memory effects.

Near-field thermal radiation between graphene-covered doped silicon plates.

The present work describes a theoretical investigation of the near-field thermal radiation between doped Si plates coated with a mono-layer of graphene. It is found that the radiative heat flux between doped Si plates can be either enhanced or suppressed by introducing graphene layer, depending on the Si doping concentration and chemical potential of graphene. Graphene can enhance the heat flux if it matches resonance frequencies of surface plasmon at vacuum-source and vacuum-receiver interfaces. In particular, significant enhancement is achieved when graphene is coated on both surfaces that originally does not support the surface plasmon resonance. The results obtained in this study provide an important guideline into enhancing the near-field thermal radiation between doped Si plates by introducing graphene.

Vertically aligned carbon nanopillars with size and spacing control for a transparent field emission display.

A top-down fabrication method is presented for vertically aligned carbon nanopillars (CNPs) using photolithography and pyrolysis. The modified backside exposure method of photolithography fabricates vertically aligned polymer (SU-8) nanopillars. The pyrolysis process, which transforms the polymer to amorphous carbon, reliably produces vertically aligned CNPs with widths ranging from 100 to 400 nm. The CNPs can be used as a transparent field emission cathode for a transparent display and light emission is observed.

Fabrication of the microchannel by metal-organic framework, copper benzenetricarboxylate.

We successfully fabricated the metal-organic framework (MOF), copper benzenetricarboxylate on a microchannel system, which was able to solve the problems created by increased heat dissipation in small electronic equipment. The microchannel system was designed to make an entrance part that can control the reaction temperature, which was predicted through a heat transfer analysis and the finite element method with COMSOL Multiphysics. Synthetic conditions, synthesis time, temperature and microchannel size were systematically tuned for the selective fabrication of copper benzenetricarboxylate on a microchannel surface. Scanning electron microscope (SEM) images, selected area electron diffraction (SAED) pattern and Fourier transform infrared (FT-IR) data clearly demonstrated that copper benzenetricarboxylate was strongly adhered to the bottom surfaces of the microchannels. Moreover, the synthesis of MOF in the microchannel system provided a much faster growth rate and better crystallinity compared to a conventional synthesis method.

Functionalized Carbon Nanoparticles as Theranostic Agents and Their Future Clinical Utility in Oncology.

Over the years, research of nanoparticle applications in pre-clinical and clinical applications has greatly advanced our therapeutic and imaging approaches to many diseases, most notably neoplastic disorders. In particular, the innate properties of inorganic nanomaterials, such as gold and iron oxide, as well as carbon-based nanoparticles, have provided the greatest opportunities in cancer theranostics. Carbon nanoparticles can be used as carriers of biological agents to enhance the therapeutic index at a tumor site. Alternatively, they can also be combined with external stimuli, such as light, to induce irreversible physical damaging effects on cells. In this review, the recent advances in carbon nanoparticles and their use in cancer theranostics will be discussed. In addition, the set of evaluations that will be required during their transition from laboratory investigations toward clinical trials will be addressed.

Multiplexed electrospraying of water in cone-jet mode using a UV-embossed pyramidal micronozzle film.

The electrospraying of water in the cone-jet mode is difficult in practical applications owing to its low throughput and the electrical discharge caused by the high surface tension of water. A film with multiple dielectric micronozzles is essential for multiplexed electrospraying of water in cone-jet mode without electrical discharge. Thus, a pyramidal micronozzle film with five nozzles was fabricated using the UV-embossing process. The pyramidal micronozzle film consisted of pyramidal micronozzles, a micropillar array, and an in-plane extractor, which were proposed to minimize wetting and concentrate the electric field to the water meniscus at the tip of the pyramidal micronozzle. The electrospraying of water using a single pyramidal micronozzle was visualized by a high-speed camera at a flow rate of 0.15-0.50 ml/h with voltages of 0.0-2.3 kV, -1.6 kV, and -4.0 kV at the water, guide ring, and collector, respectively. Three distinct modes, the dripping, spindle, and cone-jet modes, were observed and distinguished according to the motion of the water meniscus at the nozzle tip. The steady Taylor cone and jet were observed in a voltage range of 1.3-2.0 kV in water, particularly in cone-jet mode. Multiplexed electrospraying of water in cone-jet mode at a flow rate of 1.5 ml/h was performed using a pyramidal micronozzle film, demonstrating the potential for a high-throughput electrospraying system.

Mass producible and biocompatible microneedle patch and functional verification of its usefulness for transdermal drug delivery.

The key issues in the development of a microneedle patch as a tool for transdermal drug delivery are safety and delivery performance in addition to economical production. In this paper, novel fabrication methods for an inexpensive microneedle patch made of biocompatible polymer are reported, along with functional verifications for the fabricated microneedle patch through animal models. We combined the merits of in-line microneedles, i.e., easy and economical production, with the superior performance of two-dimensionally arrayed microneedles. One-dimensionally fabricated microneedles were assembled to make two-dimensionally arrayed patches to attain our goal. First, we fabricated strips with one-dimensionally arrayed microneedles through deep X-ray lithography on polymethylmethacrylate or another negative photoresist, SU-8, with sharply reduced exposure time. Second, we assembled microneedle strips to make two-dimensionally arrayed microneedles, which we utilized further for fabrication of molding masters. Finally, we prepared microneedle patches made of polycarbonate by hot embossing with these masters. We then demonstrated the actual delivery of exogenous materials through application on skin via animal experiments, and we found no detectable side effects such as inflammation or allergic reactions at the site of application.

3D Printer-Based Encapsulated Origami Electronics for Extreme System Stretchability and High Areal Coverage.

Stretchability and areal coverage of active devices are critical design considerations of stretchable or wearable photovoltaics and photodetections where high areal coverages are required. However, simultaneously maximizing both properties in conventional island-bridge structures through traditional two-dimensional manufacturing processes is difficult due to their inherent trade-offs. Here, a 3D printer-based strategy to achieve extreme system stretchability and high areal coverage through combining fused deposition modeling (FDM) and flexible conductive nanocomposites is reported. Distinguished from typical approaches of using conductive filaments for FDM which have a flexibility dilemma and conductivity trade-offs, the proposed axiomatic approach to embed a two-dimensional silver nanowire percolation network into the surfaces of flexible 3D printed structures offers sufficient conductivity and deformability as well as additional benefits of electrical junction enhancement and encapsulation of silver nanowires. Kirigami/origami-pattern-guided three-dimensional arrangements of encapsulated interconnections provide efficient control over stretchability and areal coverage. The suggested process enables a perovskite solar module with an initial areal coverage of ∼97% to be electrically and mechanically reversible with 400% system stretchability and 25 000% interconnect stretchability under the 1000 cycle test, by folding down or hiding the origami-applied interconnects under the islands. This 3D printing strategy of potentially low cost, large size capabilities, and high speed is promising for highly flexible future energy conversion applications.

Influence of the delivery systems using a microneedle array on the permeation of a hydrophilic molecule, calcein.

Despite the advantages of drug delivery through the skin, such as easy accessibility, convenience, prolonged therapy, avoidance of the liver first-pass metabolism and a large surface area, transdermal drug delivery is only used with a small subset of drugs because most compounds cannot cross the skin at therapeutically useful rates. Recently, a new concept was introduced known as microneedles and these could be pierced to effectively deliver drugs using micron-sized needles in a minimally invasive and painless manner. In this study, biocompatible polycarbonate (PC) microneedle arrays with various depths (200 and 500 microm) and densities (45, 99 and 154 ea/cm2) were fabricated using a micro-mechanical process. The skin permeability of a hydrophilic molecule, calcein (622.5D), was examined according to the delivery systems of microneedle, drug loading, depth of the PC microneedle, and density of the PC microneedle. The skin permeability of calcein was the highest when the calcein gel was applied to the skin with the 500 microm-depth PC microneedle, simultaneously. In addition, the skin permeability of calcein was the highest when 0.1g of calcein gel was coupled to the 500 microm-depth PC microneedle (154 ea/cm2) as well as longer microneedles and larger density of microneedles. Taken together, this study suggests that a biocompatible PC microneedle might be a suitable tool for transdermal drug delivery system of hydrophilic molecules with the possible applications to macromolecules such as proteins and peptides.

AFM-thermoreflectance for simultaneous measurements of the topography and temperature.

To understand the thermal failure mechanisms of electronic devices, it is essential to measure the temperature and characterize the thermal properties of individual nanometer-scale transistors in electronic devices. Previously, scanning thermal microscopy (SThM) has been used to measure the local temperature with nanometer-scale spatial resolutions using a probe with a built-in temperature sensor. However, this type of temperature measurement requires additional equipment to process the temperature-sensing signals and expensive temperature-sensor-integrated probes fabricated by complicated MEMS processes. Here, we present a novel technique which enables the simultaneous measurement of the temperature and topography of nanostructures only with a conventional atomic force microscope (AFM) of the type commonly used for topography measurements and without any modifications of the probe and extra accessories for data acquisition. The underlying principle of the proposed technique is that the local temperature of a specimen is estimated quantitatively from the thermoreflectance of a bare silicon AFM probe that is in contact with a specimen. The temperature obtained by our technique is found to be consistent with a result obtained by SThM measurements.

Tailoring near-field thermal radiation between metallo-dielectric multilayers using coupled surface plasmon polaritons.

Several experiments have shown a huge enhancement in thermal radiation over the blackbody limit when two objects are separated by nanoscale gaps. Although those measurements only demonstrated enhanced radiation between homogeneous materials, theoretical studies now focus on controlling the near-field radiation by tuning surface polaritons supported in nanomaterials. Here, we experimentally demonstrate near-field thermal radiation between metallo-dielectric multilayers at nanoscale gaps. Significant enhancement in heat transfer is achieved due to the coupling of surface plasmon polaritons (SPPs) supported at multiple metal-dielectric interfaces. This enables the metallo-dielectric multilayers at a 160-nm vacuum gap to have the same heat transfer rate as that between semi-infinite metal surfaces separated by only 75 nm. We also demonstrate that near-field thermal radiation can be readily tuned by modifying the resonance condition of coupled SPPs. This study will provide a new direction for exploiting surface-polariton-mediated near-field thermal radiation between planar structures.