Facile Direct C-H Arylation Polymerization of Conjugated Polymer, PDCBT, for Organic Solar Cells.

Direct arylation polymerization (DArP) is a synthetic method for conjugated polymers; in DArP, organometallic functionalization steps are omitted and there are no toxic byproducts. As a result, it is considered a more sustainable alternative compared to conventional methods such as Stille polymerization. To explore the possibility of DArP-based polymers as donor materials in organic solar cells (OSCs), a series of conjugated polymers based on the structure of PDCBT (poly[2,2''''-bis[[(2-butyloctyl)oxy]carbonyl][2,2':5',2'':5'',2'''-quaterthiophene]-5,5'''-diyl]) are synthesized using DArP and Stille polymerization. By controlling the monomer concentration and reaction time in DArP, DArP-5 with the highest Mn (21.9 kDa) can be obtained and its optoelectronic properties, electrochemical properties, and microscopic molecular ordering are comparable to those of Stille-based PDCBT (Stille-P). Analysis of the polymer structure indicates no structural defects such as crosslinking from undesired ß-coupling reactions in DArP-5. Upon blending with the PC71 BM acceptor molecule, an increase in the crystallite size of DArP-5 is also observed. In OSC devices with a polymer:PC71 BM bulk-heterojunction photoactive layer, DArP-5 demonstrates a comparable power conversion efficiency of 5.8% with that of Stille-P (5.5%). These results prove that DArP is suitable for synthesizing PDCBT, and DArP-based PDCBT can be used in OSCs as an alternative of Stille-based one.

A Comparative Study of Gamma-Ray Irradiation-Induced Oxidation: Polyethylene, Poly (Vinylidene Fluoride), and Polytetrafluoroethylene.

Radiation techniques are used to modify the physical, chemical and biological properties of polymers. This induces crosslinking and degradation reactions of polymers by utilizing radicals generated through ionizing radiation. However, oxidation products (such as carbonyl) can be formed because oxidation occurs by chain scission in the presence of oxygen. Herein, we demonstrate the gamma-ray irradiation-induced oxidation with and without fluorine using polyethylene, polyvinylidene fluoride and polytetrafluoroethylene under the same conditions. In this study, changes in element-content and chemical-bond structures were analyzed before and after gamma-ray irradiation under air atmosphere. As a result, polytetrafluo-roethylene showed less oxidation and excellent thermal properties after the absorbed dose of 500 kGy. This can be attributed to the generation of stable perfluoroalkylperoxy radicals after gamma ray irradiation in the PTFE structure containing only CF2 groups, thereby hindering the oxidation reaction.

Recent progress of ultra-narrow-bandgap polymer donors for NIR-absorbing organic solar cells.

Solution-processed near-infrared (NIR)-absorbing organic solar cells (OSCs) have been explored worldwide because of their potential as donor:acceptor bulk heterojunction (BHJ) blends. In addition, NIR-absorbing OSCs have attracted attention as high specialty equipment in next-generation optoelectronic devices, such as semitransparent solar cells and NIR photodetectors, owing to their feasibility for real-time commercial application in industry. With the introduction of NIR-absorbing non-fullerene acceptors (NFAs), the value of OSCs has been increasing while organic donor materials capable of absorbing light in the NIR region have not been actively studied yet compared to NIR-absorbing acceptor materials. Therefore, we present an overall understanding of NIR donors.

Preliminary Study on the Simulation of a Radiation Damage Analysis of Biodegradable Polymers.

In this study, biodegradable poly(L-lactide-co-ε-caprolactone) (PLCL) and poly(L-co-d,l lactide) (PLDLA) were evaluated using Geant4 (G4EmStandardPhysics_option4) for damage simulation, in order to predict the safety of these biodegradable polymers against gamma ray sterilization. In the PLCL damage model, both chain scission and crosslinking reactions appear to occur at a radiation dose in the range 0-200 kGy, but the chain cleavage reaction is expected to be relatively dominant at high irradiation doses above 500 kGy. On the other hand, the PLDLA damage model predicted that the chain cleavage reaction would prevail at the total irradiation dose (25-500 kGy). To verify the simulation results, the physicochemical changes in the irradiated PLCL and PLDLA films were characterized by GPC (gel permeation chromatography), ATR-FTIR (attenuated total reflection Fourier transform infrared), and DSC (difference scanning calorimetry) analyses. The Geant4 simulation curve for the radiation-induced damage to the molecular weight was consistent with the experimentally obtained results. These results imply that the pre-simulation study can be useful for predicting the optimal irradiation dose and ensuring material safety, particularly for implanted biodegradable materials in radiation processing.

Systematic Study on the Morphological Development of Blade-Coated Conjugated Polymer Thin Films via In Situ Measurements.

The morphology of conjugated polymer thin films, determined by the kinetics of film drying, is closely correlated with their electrical properties. Herein, we focused on dramatic changes in the thin-film morphology of blade-coated poly{[N,N'-bis(2-octyldodecyl)-naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl]-alt-5,5'-(2,2'-bithiophene)} caused by the effect of solvent and coating temperature. Through in situ measurements, the evolution of polymer aggregates and crystallites, which plays a decisive role in the formation of the charge-transport pathway, was observed in real time. By combining in situ ultraviolet-visible spectroscopy and in situ grazing-incidence wide-angle X-ray scattering analysis, we could identify five distinct stages during the blade-coating process; these stages were observed irrespective of the solvent and coating temperature used. The five stages are described in detail with a proposed model of film formation. This insight is an important step in understanding the relationship between the morphology of thin polymer films and their charge-transport properties as well as in optimizing the structural evolution of thin films.

Unsymmetrical Small Molecules for Broad-Band Photoresponse and Efficient Charge Transport in Organic Phototransistors.

Organic photosensitizers have been investigated as effective light-sensing elements that can promote strong absorption with high field-effect mobility in organic phototransistors (OPTs). In this study, a novel organic photosensitizer is synthesized to demonstrate broad-band photoresponse with enhanced electrical performance. An unsymmetrical small molecule of a solubilizing donor (Dsol)-acceptor (A)-dye donor (Ddye) type connected with a twisted conjugation system is designed for broad-band detection (ranging from 250 to 700 nm). This molecule has high solubility, thereby facilitating the formation of uniformly dispersed nanoparticles in an insulating polymer matrix, which is deposited on top of OPT semiconductors by a simple solution process. The broad-band photodetection shown by the organic photosensitizer is realized with improved mobility close to an order of magnitude and high on/off current ratio (∼105) of the organic semiconductor. Furthermore, p-type charge transport behavior in the channel of the OPT is enhanced through the intrinsic electron-accepting ability of the organic photosensitizer caused by the unique molecular configuration. These structural properties of organic photosensitizers contribute to an improvement in broad-band photosensing systems with new optoelectronic properties and functionalities.

Erratum: Diseleno[3,2-b:2',3'-d]selenophene-Containing High-Mobility Conjugated Polymer for Organic Field-Effect Transistors.

[This corrects the article DOI: 10.1002/advs.201900245.].

Diseleno[3,2-b:2',3'-d]selenophene-Containing High-Mobility Conjugated Polymer for Organic Field-Effect Transistors.

The synthesis of a diseleno[3,2-b:2',3'-d]selenophene (DSS) composed of three fused selenophenes is reported and it is used as a building block for the preparation of a high hole mobility conjugated polymer (PDSSTV). The polymer demonstrates strong intermolecular interactions even in solution, despite steric repulsion between the large Se atom in DSS and adjacent (Cß)-H atoms which leads to a partially twisted confirmation PDSSTV. Nevertheless, 2D grazing incidence X-ray diffraction (2D-GIXD) analysis reveals that the polymer tends to align in a highly ordered edge-on orientation after thermal annealing. The polymer demonstrates promising performance in a field-effect transistor device with saturated hole mobility up to 2 cm2 V-1 s-1 obtained under relatively low gate voltages of -30 V. The ultilization of a Se-containing fused aromatic system, therefore, appears to be a promising avenue for the development of high-performance conjugated polymers.