RESUMO
Multisensory integration enables the simultaneous perception of multiple environmental stimuli while minimizing size and energy consumption. However, conventional multifunctional integration in flexible electronics typically requires large-scale horizontal sensing arrays (such as flexible printed circuit boards), posing decoupling complexities, tensile strain limitation, and spatial constraints. Herein, a fully flexible multimodal sensing system (FMSS) is developed by coupling biomimetic stretchable conductive films (BSCFs) and strain-insensitive communication interfaces using a vertical stacking integration strategy. The FMSS achieves vertical integration without additional adhesives, and it can incorporate individual sensing layers and stretchable interconnects without any essential constraint on their deformations. Accordingly, the temperature and pressure are precisely decoupled simultaneously, and tensile stress can be accurately discerned in different directions. This vertical stacking integration strategy is expected to offer a new approach to significantly streamline the design and fabrication of multimodal sensing systems and enhance their decoupling capabilities.
RESUMO
Oral health is crucial to daily life, yet many people worldwide suffer from oral diseases. With the development of oral tissue engineering, there is a growing demand for dental biomaterials. Addressing oral diseases often requires a two-fold approach: fighting bacterial infections and promoting tissue growth. Hydrogels are promising tissue engineering biomaterials that show great potential for oral tissue regeneration and drug delivery. In this review, we present a classification of hydrogels commonly used in dental research, including natural and synthetic hydrogels. Furthermore, recent applications of these hydrogels in endodontic restorations, periodontal tissues, mandibular and oral soft tissue restorations, and related clinical studies are also discussed, including various antimicrobial and tissue growth promotion strategies used in the dental applications of hydrogels. While hydrogels have been increasingly studied in oral tissue engineering, there are still some challenges that need to be addressed for satisfactory clinical outcomes. This paper summarizes the current issues in the abovementioned application areas and discusses possible future developments.
Assuntos
Hidrogéis , Engenharia Tecidual , Humanos , Materiais Biocompatíveis/farmacologia , Hidrogéis/farmacologia , PeriodontoRESUMO
BACKGROUND AND AIM: Secondary peristalsis contributes to the clearance of retained refluxate from the esophagus. Sildenafil, a phosphodiesterase-5 inhibitor, inhibits primary esophageal peristalsis, but its effects on secondary peristalsis remain unknown. This study sought to investigate whether sildenafil could influence physiological characteristics of secondary peristalsis by applying high-resolution manometry (HRM). METHODS: Seventeen healthy volunteers (15 men and 2 women, aged 30.2 ± 6.4 years) underwent two HRM studies on separate days following the administration of either a placebo or 50 mg of sildenafil in a random order. Both studies were performed using a water-perfused HRM catheter containing one air injection channel positioned in the mid-esophagus. Secondary peristalsis was stimulated by a rapid mid-esophageal injection of 10 or 20 mL of air 1 h after the administration of either the placebo or sildenafil. The frequency and distal contractile integral of secondary peristalsis were then compared. RESULTS: Complete secondary peristalsis triggered by the 20-mL air injection was more frequent than observed with the 10-mL air injection (P < 0.001). The vigor of secondary peristalsis triggered by the injection of either volume of air was lower than that of primary peristalsis (P < 0.001). Sildenafil significantly reduced the success rate (P ≤ 0.001) and vigor (P < 0.001) of secondary peristalsis relative to the effects of the placebo at both distension volumes. CONCLUSIONS: Secondary peristalsis can be successfully triggered by rapid air injection during HRM. Sildenafil reduces both the success rate and the vigor of secondary peristalsis, similar to that seen with primary peristalsis.
Assuntos
Esôfago/efeitos dos fármacos , Manometria/métodos , Peristaltismo/efeitos dos fármacos , Inibidores da Fosfodiesterase 5/farmacologia , Citrato de Sildenafila/farmacologia , Adulto , Ar , Feminino , Humanos , Masculino , Contração Muscular/efeitos dos fármacos , Adulto JovemRESUMO
To get an optimal product of orthopaedic implant or regenerative medicine needs to follow trial-and-error analyses to investigate suitable product's material, structure, mechanical properites etc. The whole process from in vivo tests to clinical trials is expensive and time-consuming. Computational model is seen as a useful analysis tool to make the product development. A series of models for simulating tissue engineering process from cell attachment to tissue regeneration are reviewed. The challenging is that models for simulating tissue engineering processes are developed separately. From cell to tissue regeneration, it would go through blood injection after moving out the defect; to cell disperse and attach on the scaffold; to proliferation, migration and differentiation; and to the final part-becoming mature tissues. This paper reviewed models that related to tissue engineering process, aiming to provide an opportunity for researchers to develop a mature model for whole tissue engineering process. This article focuses on the model analysis methods of cell adhesion, nutrient transport and cell proliferation, differentiation and migration in tissue engineering. In cell adhesion model, one of the most accurate method is to use discrete phase model to govern cell movement and use Stanton-Rutland model for simulating cell attachment. As for nutrient transport model, numerical model coupling with volume of fluid model and species transport model together is suitable for predicting nutrient transport process. For cell proliferation, differentiation and migration, finite element method with random-walk algorithm is one the most advanced way to simulate these processes. Most of the model analysis methods require further experiments to verify the accuracy and effectiveness. Due to the lack of technology to detect the rate of nutrient diffusion, there are especially few researches on model analysis methods in the area of blood coagulation. Therefore, there is still a lot of work to be done in the research of the whole process model method of tissue engineering. In the future, the numerical model would be seen as an optimal way to investigate tissue engineering products bioperformance and also enable to optimize the parameters and material types of the tissue engineering products.
Assuntos
Engenharia Tecidual , Diferenciação Celular , Movimento Celular , Proliferação de Células , Simulação por ComputadorRESUMO
PURPOSE: It was the primary purpose of the present systematic review to identify the optimal protection measures during COVID-19 pandemic and provide guidance of protective measures for orthopedic surgeons. The secondary purpose was to report the protection experience of an orthopedic trauma center in Wuhan, China during the pandemic. METHODS: A systematic search of the PubMed, Cochrane, Web of Science, Google Scholar was performed for studies about COVID-19, fracture, trauma, orthopedic, healthcare workers, protection, telemedicine. The appropriate protective measures for orthopedic surgeons and patients were reviewed (on-site first aid, emergency room, operating room, isolation wards, general ward, etc.) during the entire diagnosis and treatment process of traumatic patients. RESULTS: Eighteen studies were included, and most studies (13/18) emphasized that orthopedic surgeons should pay attention to prevent cross-infection. Only four studies have reported in detail how orthopedic surgeons should be protected during surgery in the operating room. No detailed studies on multidisciplinary cooperation, strict protection, protection training, indications of emergency surgery, first aid on-site and protection in orthopedic wards were found. CONCLUSION: Strict protection at every step in the patient pathway is important to reduce the risk of cross-infection. Lessons learnt from our experience provide some recommendations of protective measures during the entire diagnosis and treatment process of traumatic patients and help others to manage orthopedic patients with COVID-19, to reduce the risk of cross-infection between patients and to protect healthcare workers during work. LEVEL OF EVIDENCE: IV.
Assuntos
Infecções por Coronavirus/prevenção & controle , Infecção Hospitalar/prevenção & controle , Transmissão de Doença Infecciosa do Paciente para o Profissional/prevenção & controle , Procedimentos Ortopédicos/métodos , Ortopedia , Pandemias/prevenção & controle , Pneumonia Viral/prevenção & controle , Telemedicina/métodos , Filtros de Ar , Betacoronavirus , COVID-19 , Teste para COVID-19 , China , Técnicas de Laboratório Clínico , Infecções por Coronavirus/diagnóstico , Infecções por Coronavirus/transmissão , Procedimentos Cirúrgicos Eletivos , Emergências , Serviço Hospitalar de Emergência , Primeiros Socorros , Fraturas Ósseas/cirurgia , Humanos , Salas Cirúrgicas , Cirurgiões Ortopédicos , Equipamento de Proteção Individual , Pneumonia Viral/diagnóstico , Pneumonia Viral/transmissão , SARS-CoV-2 , Transporte de Pacientes , Centros de TraumatologiaRESUMO
Osteochondral tissue engineering aims to regenerate functional tissue-mimicking physiological properties of injured cartilage and its subchondral bone. Given the distinct structural and biochemical difference between bone and cartilage, bilayered scaffolds, and bioreactors are commonly employed. We present an osteochondral culture system which cocultured ATDC5 and MC3T3-E1 cells on an additive manufactured bilayered scaffold in a dual-chamber perfusion bioreactor. Also, finite element models (FEM) based on the microcomputed tomography image of the manufactured scaffold as well as on the computer-aided design (CAD) were constructed; the microenvironment inside the two FEM was studied and compared. In vitro results showed that the coculture system supported osteochondral tissue growth in terms of cell viability, proliferation, distribution, and attachment. In silico results showed that the CAD and the actual manufactured scaffold had significant differences in the flow velocity, differentiation media mixing in the bioreactor and fluid-induced shear stress experienced by the cells. This system was shown to have the desired microenvironment for osteochondral tissue engineering and it can potentially be used as an inexpensive tool for testing newly developed pharmaceutical products for osteochondral defects.
Assuntos
Osso e Ossos , Cartilagem , Técnicas de Cultura de Células , Microambiente Celular , Simulação por Computador , Alicerces Teciduais/química , Microtomografia por Raio-X , Animais , Osso e Ossos/química , Osso e Ossos/diagnóstico por imagem , Osso e Ossos/metabolismo , Cartilagem/citologia , Cartilagem/diagnóstico por imagem , Cartilagem/metabolismo , Diferenciação Celular , Linhagem Celular , Proliferação de Células , Técnicas de Cocultura , CamundongosRESUMO
Osteoarthritis (OA) is a degenerative joint disease, typified by degradation of cartilage and changes in the subchondral bone, resulting in pain, stiffness and reduced mobility. Current surgical treatments often fail to regenerate hyaline cartilage and result in the formation of fibrocartilage. Tissue engineering approaches have emerged for the repair of cartilage defects and damages to the subchondral bones in the early stage of OA and have shown potential in restoring the joint's function. In this approach, the use of three-dimensional scaffolds (with or without cells) provides support for tissue growth. Commercially available osteochondral (OC) scaffolds have been studied in OA patients for repair and regeneration of OC defects. However, some controversial results are often reported from both clinical trials and animal studies. The objective of this chapter is to report the scaffolds clinical requirements and performance of the currently available OC scaffolds that have been investigated both in animal studies and in clinical trials. The findings have demonstrated the importance of biological and biomechanical fixation of the OC scaffolds in achieving good cartilage fill and improved hyaline cartilage formation. It is concluded that improving cartilage fill, enhancing its integration with host tissues and achieving a strong and stable subchondral bone support for overlying cartilage are still grand challenges for the early treatment of OA.
Assuntos
Osteoartrite/cirurgia , Medicina Regenerativa/métodos , Engenharia Tecidual/métodos , Alicerces Teciduais , Animais , Artroplastia Subcondral , Materiais Biocompatíveis/uso terapêutico , Osso e Ossos/irrigação sanguínea , Osso e Ossos/fisiopatologia , Cartilagem Articular/fisiopatologia , Adesão Celular , Movimento Celular , Ensaios Clínicos como Assunto , Terapia Combinada , Progressão da Doença , Humanos , Teste de Materiais , Células-Tronco Mesenquimais/citologia , Osteoartrite/terapia , Recuperação de Função Fisiológica , Engenharia Tecidual/instrumentação , Engenharia Tecidual/tendências , Transplante AutólogoRESUMO
In this study, we developed polydopamine (PDA)-functionalized alginate dialdehyde-gelatine (ADA-GEL) scaffolds for subchondral bone regeneration. These polymeric scaffolds were then coated with ß-Lactoglobulin (ß-LG) at concentrations of 1 mg/ml and 2 mg/ml. Morphological analysis indicated a homogeneous coating of the ß-LG layer on the surface of network-like scaffolds. The ß-LG-coated scaffolds exhibited improved swelling capacity as a function of the ß-LG concentration. Compared to ADA-GEL/PDA scaffolds, the ß-LG-coated scaffolds demonstrated delayed degradation and enhanced biomineralization. Here, a lower concentration of ß-LG showed long-lasting stability and superior biomimetic hydroxyapatite mineralization. According to the theoretical findings, the single-state, representing the low concentration of ß-LG, exhibited a homogeneous distribution on the surface of the PDA, while the dimer-state (high concentration) displayed a high likelihood of uncontrolled interactions. ß-LG-coated ADA-GEL/PDA scaffolds with a lower concentration of ß-LG provided a biocompatible substrate that supported adhesion, proliferation, and alkaline phosphatase (ALP) secretion of sheep bone marrow mesenchymal stem cells, as well as increased expression of osteopontin (SPP1) and collagen type 1 (COL1A1) in human osteoblasts. These findings indicate the potential of protein-coated scaffolds for subchondral bone tissue regeneration. STATEMENT OF SIGNIFICANCE: This study addresses a crucial aspect of osteochondral defect repair, emphasizing the pivotal role of subchondral bone regeneration. The development of polydopamine-functionalized alginate dialdehyde-gelatine (ADA-GEL) scaffolds, coated with ß-Lactoglobulin (ß-LG), represents a novel approach to potentially enhance subchondral bone repair. ß-LG, a milk protein rich in essential amino acids and bioactive peptides, is investigated for its potential to promote subchondral bone regeneration. This research explores computationally and experimentally the influence of protein concentration on the ordered or irregular deposition, unravelling the interplay between coating structure, scaffold properties, and in-vitro performance. This work contributes to advancing ordered protein coating strategies for subchondral bone regeneration, providing a biocompatible solution with potential implications for supporting subsequent cartilage repair.
Assuntos
Alginatos , Regeneração Óssea , Materiais Revestidos Biocompatíveis , Gelatina , Indóis , Lactoglobulinas , Polímeros , Alicerces Teciduais , Alginatos/química , Alginatos/farmacologia , Indóis/química , Indóis/farmacologia , Alicerces Teciduais/química , Animais , Polímeros/química , Polímeros/farmacologia , Regeneração Óssea/efeitos dos fármacos , Gelatina/química , Ovinos , Lactoglobulinas/química , Lactoglobulinas/farmacologia , Materiais Revestidos Biocompatíveis/farmacologia , Materiais Revestidos Biocompatíveis/química , Células-Tronco Mesenquimais/metabolismo , Células-Tronco Mesenquimais/efeitos dos fármacos , Células-Tronco Mesenquimais/citologia , Aldeídos/química , Proliferação de Células/efeitos dos fármacosRESUMO
A vast amount of knowledge has been acquired through human activities such as farming, hunting, and fishing. Throughout history, humans have utilized living creatures for disease treatment, relying on the natural world's healing powers. The special "healers" may be able to treat patients via the power of nature. However, there was no systematic introduction or summary of these treatments. Therefore, we conducted a literature review based on PubMed, Google Scholar, Web of Science, Scopus, CNKI and WanFang DATA. Here, we defined this unique method as "animal healer" and six common kinds of animal healers were reviewed. These are fish therapy, pet therapy, worm therapy, leech therapy, maggot therapy, and bee therapy. According to the different characteristics of healers, treatment methods mainly included bite, parasitism, contact and communication. With the advantages of green and effectiveness, animal healers have great therapy potential against a variety of refractory diseases. The main purpose of this review is to draw people's attention to animal healer, promote it to become a possible clinical treatment strategy, and make further exploration in species cultivation, mechanism research, animal welfare, standard setting, safety evaluation and other aspects. In the future, animal healers will play an increasingly important role in medicine and hopefully solve more medical problems and dilemmas.
RESUMO
INTRODUCTION: Platelet transfusion is a standard treatment to prevent bleeding in patients with hematological malignancies. Although transfusions can improve platelet count, their impact on platelet function remains controversial. METHODS: We conducted flow cytometry to assess platelet function before and after transfusion and performed subgroup analyses to examine differences based on blood type, corrected count increment (CCI), and platelet microparticles. RESULTS: Overall, 50 patients who received prophylactic platelet transfusion were enrolled. CD42b expression increased, whereas CD41 expression decreased after transfusion. Apheresis platelets exhibited the lowest expression of PAC-1 and P-selectin when exposed to agonist stimulations. PAC-1 expression increased under high adenosine diphosphate (ADP) stimulation, while P-selectin expression increased under both high ADP and thrombin receptor-activating peptide stimulation. In the subgroup analysis, patients with a CCI >4500 and those with the same blood types exhibited a more significant increase in PAC-1 and P-selectin expression under agonist stimulation. When comparing apheresis platelets collected on different days, only the percentage of platelet-derived microparticles showed a significant increase. CONCLUSION: Prophylactic transfusion improved platelet function. Platelet function significantly improved in patients with a CCI >4500, those with the same blood types as that of apheresis platelets, or those with platelet-derived microparticle levels <4.7%. No significant improvement in platelet function was noted after the transfusion of different blood types with acceptable compatibility or the transfusion of incompatible blood types. Our results suggest that transfusing platelets with the same blood type remains the optimal choice.
Assuntos
Plaquetas , Neoplasias Hematológicas , Transfusão de Plaquetas , Humanos , Transfusão de Plaquetas/métodos , Neoplasias Hematológicas/terapia , Plaquetas/metabolismo , Feminino , Masculino , Pessoa de Meia-Idade , Idoso , Adulto , Testes de Função Plaquetária , Contagem de Plaquetas , Selectina-P/sangue , Micropartículas Derivadas de Células/metabolismoRESUMO
Given post-operative aseptic loosening in orthopedic disease treatment, osteointegration occurs at the bone-implant interface as a holistic process, including immunoregulation (e.g., macrophage polarization), angiogenesis and osteogenesis in sequence. In order to achieve early rapid and satisfactory osseointegration, different nano-shaped (nanocone, nanopolyhedron and nanoflower abbr. NC, NP & NF) cerium oxide (CeO2-x) coatings, endowed with "nanozyme-like" activities for multiple free radical elimination and osteoimmunology regulation, were hydrothermally synthesized on titanium alloy (TC4). In vitro cell experiments showed that nano-CeO2-x coated TC4 not only induced polarization of RAW264.7 cells toward M2 phenotype, but also promoted angiogenesis and vascularization of endothelial cells along with differentiation and mineralization of osteogenic precursor cells. Improvements in M2-polarized macrophage, angiogenesis, and bone regeneration were further confirmed in a rat femoral condyle model. Among the above three nano-morphologies, NF exhibited the best osseoinetegration. RNA sequencing and mechanism exploration suggested that the inhibition of PI3K-AKT signaling pathway was essential for immunomodulatory capacity of NF. In conclusion, it provided promising insights into the immunomodulatory exploitation of orthopedic implants.
RESUMO
Gradient porous structure made by additive manufacturing (AM) technology is potential to improve the long-term stability of orthopaedic implants through bone ingrowth while maintaining mechanical safety. In this study, a parametrical optimization methodology for the customized gradient porous implants was developed based on a stress-dependent design algorithm. Clinical requirements and manufacturing capabilities of AM were considered in the design procedure. A femoral stem with a minimum bone loss proportion of 2.4% by optimizing the control parameters. This study provided a feasible and flexible design approach for the customized implant with gradient porous structure or material components.
Assuntos
Porosidade , Próteses e Implantes , Análise de Elementos Finitos , Módulo de Elasticidade , FêmurRESUMO
The development of peptide-based materials has emerged as one of the most challenging aspects of biomaterials in recent years. It has been widely acknowledged that peptide-based materials can be used in a broad range of biomedical applications, particularly in tissue engineering. Among them, hydrogels have been attracting considerable interest in tissue engineering because they mimic tissue formation conditions by providing a three-dimensional environment and a high water content. It has been found that peptide-based hydrogels have received more attention due to mimicking proteins, particularly extracellular matrix proteins, as well as the wide variety of applications they are capable of serving. It is without a doubt that peptide-based hydrogels have become the leading biomaterials of today owing to their tunable mechanical stability, high water content, and high biocompatibility. Here, we discuss in detail various types of peptide-based materials, emphasizing peptide-based hydrogels, and then we examine in detail how hydrogels are formed, paying particular attention to the peptide structures that are incorporated into the final structure. Following that, we discuss the self-assembly and formation of hydrogels under various conditions, as well as the parameters to be considered as critical factors, which include pH, amino acid composi- tion within the sequence, and cross-linking techniques. Further, recent studies on the development of peptide-based hydrogels and their applications in tissue engineering are reviewed.
RESUMO
Coronavirus disease 2019 (COVID-19) vaccines are associated with serious thromboembolic or thrombocytopenic events including vaccine-induced immune thrombocytopenia and thrombosis and immune thrombocytopenia, particularly AZD1222/ChAdOx1. According to the proposed mechanism, COVID-19 vaccines stimulate inflammation and platelet activation. In this study, we analyzed the role of AZD1222/ChAdOx1 vaccines in the activation of platelets and the release of anti-PF4 antibodies and inflammatory cytokines in a cohort of healthy donors without vaccine-induced immune thrombotic thrombocytopenia (VITT). Forty-eight healthy volunteers were enrolled in this study. Blood samples were collected from peripheral blood at three time points: before vaccination and 1 and 7 days after vaccination. Compared with the prevaccination data, a decrease in the leukocyte and platelet counts was observed 1 day after vaccination, which recovered 7 days after injection. The percentage of activated GPIIb/IIIa complex (PAC-1) under high ADP or thrombin receptor-activating peptide stimulation increased 1 day after vaccination. Furthermore, interluekin-8 (IL-8) and interferon-gamma-induced protein 10 (IP-10) increased significantly. Additionally, platelet activation and inflammation, with the release of cytokines, were observed; however, none of the individuals developed VITT. Mild thrombocytopenia with platelet activation and inflammation with an elevation of IL-8 and IP-10 were observed after AZ vaccination.
RESUMO
Accumulated ice has brought much damage to engineering and people's lives. The accumulation of ice can affect the flight safety of aircraft and lead to the failure of cables and power generation blades; it can even cause damage to human life. Traditional anti-icing and de-icing strategies have many disadvantages such as high energy consumption, low efficiency, or pollution of the environment. Therefore, inspired by animal communities, researchers have developed new passive anti-icing materials such as superhydrophobic material. In this paper, the solid surface wetting phenomenon and superhydrophobic anti-icing and de-icing mechanism were introduced. The methods of fabrication of superhydrophobic surfaces were summarized. The research progress of wear-resistant superhydrophobic coatings, self-healing/self-repairing superhydrophobic coatings, photothermal superhydrophobic coatings, and electrothermal superhydrophobic coatings in the field of anti-icing and de-icing was reviewed. The current problems and challenges were analyzed, and the development trend of superhydrophobic materials was also prospected in the field of anti-icing and de-icing. The practicality of current superhydrophobic materials should continue to be explored in depth.
RESUMO
The success of orthopedic implants depends on the sufficient integration between tissue and implant, which is influenced by the cellular responses to their microenvironment. The conformation of adsorbed extracellular matrix is crucial for cellular behavior instruction via manipulating the physiochemical features of materials. To investigate the electrostatic adsorption mechanism of fibronectin on nanotopographies, a theoretical model was established to determine surface charge density and Coulomb's force of nanotopography - fibronectin interactions using a Laplace equation satisfying the boundary conditions. Surface charge density distribution of nanotopographies with multiple random fibronectin was simulated based on random number and Monte Carlo hypothesis. The surface charge density on the nanotopographies was compared to the experimental measurements, to verify the effectiveness of the theoretical model. The model was implemented to calculate the Coulomb force generated by nanotopographies to compare the fibronectin adsorption. This model has revealed the multiple random quantitative fibronectin electrostatic adsorption to the nanotopographies, which is beneficial for orthopedic implant surface design.Significance: The conformation and distribution of adsorbed extracellular matrix on biomedical implants are crucial for directing cellular behaviors. However, the Ti nanotopography-ECM interaction mechanism remains largely unknown. This is mostly because of the interactions that are driven by electrostatic force, and any experimental probe could interfere with the electric field between the charged protein and Ti surface. A theoretical model is hereby proposed to simulate the adsorption between nanotopographies and fibronectin. Random number and Monte Carlo hypothesis were applied for multiple random fibronectin simulation, and the Coulomb's force between nanoconvex and nanoconcave structures was comparatively analyzed.
Assuntos
Eletricidade , Fibronectinas , Adsorção , Simulação por Computador , Modelos TeóricosRESUMO
The authors wish to make the following corrections to this published paper [...].
RESUMO
Stress shielding secondary to bone resorption is one of the main causes of aseptic loosening, which limits the lifespan of hip prostheses and exacerbates revision surgery rates. In order to minimise post-hip replacement stress variations, this investigation proposes a low-stiffness, porous Ti6Al4V hip prosthesis, developed through selective laser melting (SLM). The stress shielding effect and potential bone resorption properties of the porous hip implant were investigated through both in vitro quasi-physiological experimental assays, together with finite element analysis. A solid hip implant was incorporated in this investigation for contrast, as a control group. The stiffness and fatigue properties of both the solid and the porous hip implants were measured through compression tests. The safety factor of the porous hip stem under both static and dynamic loading patterns was obtained through simulation. The porous hip implant was inserted into Sawbone/PMMA cement and was loaded to 2,300 N (compression). The proposed porous hip implant demonstrated a more natural stress distribution, with reduced stress shielding (by 70%) and loss in bone mass (by 60%), when compared to a fully solid hip implant. Solid and porous hip stems had a stiffness of 2.76 kN/mm and 2.15 kN/mm respectively. Considering all daily activities, the porous hip stem had a factor of safety greater than 2. At the 2,300 N load, maximum von Mises stresses on the hip stem were observed as 112 MPa on the medial neck and 290 MPa on the distal restriction point, whereby such values remained below the endurance limit of 3D printed Ti6Al4V (375 MPa). Overall, through the strut thickness optimisation process for a Ti6Al4V porous hip stem, stress shielding and bone resorption can be reduced, therefore proposing a potential replacement for the generic solid implant.
RESUMO
In nature, aquatic organisms have evolved various attachment systems, and their attachment ability has become a specific and mysterious survival skill for them. Therefore, it is significant to study and use their unique attachment surfaces and outstanding attachment characteristics for reference and develop new attachment equipment with excellent performance. Based on this, in this review, the unique non-smooth surface morphologies of their suction cups are classified and the key roles of these special surface morphologies in the attachment process are introduced in detail. The recent research on the attachment capacity of aquatic suction cups and other related attachment studies are described. Emphatically, the research progress of advanced bionic attachment equipment and technology in recent years, including attachment robots, flexible grasping manipulators, suction cup accessories, micro-suction cup patches, etc., is summarized. Finally, the existing problems and challenges in the field of biomimetic attachment are analyzed, and the focus and direction of biomimetic attachment research in the future are pointed out.
RESUMO
3D printing technology is an emerging technology. It constructs solid bodies by stacking materials layer by layer, and can quickly and accurately prepare bone tissue engineering scaffolds with specific shapes and structures to meet the needs of different patients. The field of life sciences has received a great deal of attention. However, different 3D printing technologies and materials have their advantages and disadvantages, and there are limitations in clinical application. In this paper, the technology, materials and clinical applications of 3D printed bone tissue engineering scaffolds are reviewed, and the future development trends and challenges in this field are prospected.