Exercise-induced α-ketoglutaric acid stimulates muscle hypertrophy and fat loss through OXGR1-dependent adrenal activation.

Beneficial effects of resistance exercise on metabolic health and particularly muscle hypertrophy and fat loss are well established, but the underlying chemical and physiological mechanisms are not fully understood. Here, we identified a myometabolite-mediated metabolic pathway that is essential for the beneficial metabolic effects of resistance exercise in mice. We showed that substantial accumulation of the tricarboxylic acid cycle intermediate α-ketoglutaric acid (AKG) is a metabolic signature of resistance exercise performance. Interestingly, human plasma AKG level is also negatively correlated with BMI. Pharmacological elevation of circulating AKG induces muscle hypertrophy, brown adipose tissue (BAT) thermogenesis, and white adipose tissue (WAT) lipolysis in vivo. We further found that AKG stimulates the adrenal release of adrenaline through 2-oxoglutarate receptor 1 (OXGR1) expressed in adrenal glands. Finally, by using both loss-of-function and gain-of-function mouse models, we showed that OXGR1 is essential for AKG-mediated exercise-induced beneficial metabolic effects. These findings reveal an unappreciated mechanism for the salutary effects of resistance exercise, using AKG as a systemically derived molecule for adrenal stimulation of muscle hypertrophy and fat loss.

Production of 1,4-Butanediol from Succinic Acid Using Escherichia Coli Whole-Cell Catalysis.

The widespread attention towards 1,4-butanediol (BDO) as a key chemical raw material stems from its potential in producing biodegradable plastics. However, the efficiency of its biosynthesis via current bioprocesses is limited. In this study, a dual-pathway approach for 1,4-BDO production from succinic acid was developed. Specifically, a double-enzyme catalytic pathway involving carboxylic acid reductase and ethanol dehydrogenase was proposed. Optimization of the expression levels of the pathway enzymes led to a significant 318 % increase in 1,4-BDO titer. Additionally, the rate-limiting enzyme MmCAR was engineered to enhance the kcat/KM values by 50 % and increase 1,4-BDO titer by 46.7 %. To address cofactor supply limitations, an NADPH and ATP cycling system was established, resulting in a 48.9 % increase in 1,4-BDO production. Ultimately, after 48 hours, 1,4-BDO titers reached 201 mg/L and 1555 mg/L in shake flask and 5 L fermenter, respectively. This work represents a significant advancement in 1,4-BDO synthesis from succinic acid, with potential applications in the organic chemical and food industries.

Efficient production of protocatechuic acid using systems engineering of Escherichia coli.

Protocatechuic acid (3, 4-dihydroxybenzoic acid, PCA) is widely used in the pharmaceuticals, health food, and cosmetics industries owing to its diverse biological activities. However, the inhibition of 3-dehydroshikimate dehydratase (AroZ) by PCA and its toxicity to cells limit the efficient production of PCA in Escherichia coli. In this study, a high-level strain of 3-dehydroshikimate, E. coli DHS01, was developed by blocking the carbon flow from the shikimate-overproducing strain E. coli SA09. Additionally, the PCA biosynthetic pathway was established in DHS01 by introducing the high-activity ApAroZ. Subsequently, the protein structure and catalytic mechanism of 3-dehydroshikimate dehydratase from Acinetobacter pittii PHEA-2 (ApAroZ) were clarified. The variant ApAroZR363A, achieved by modulating the conformational dynamics of ApAroZ, effectively relieved product inhibition. Additionally, the tolerance of the strain E. coli PCA04 to PCA was enhanced by adaptive laboratory evolution, and a biosensor-assisted high-throughput screening method was designed and implemented to expedite the identification of high-performance PCA-producing strains. Finally, in a 5 L bioreactor, the final strain PCA05 achieved the highest PCA titer of 46.65 g/L, a yield of 0.23 g/g, and a productivity of 1.46 g/L/h for PCA synthesis from glucose using normal fed-batch fermentation. The strategies described herein serve as valuable guidelines for the production of other high-value and toxic products.

Systems engineering Escherichia coli for efficient production p-coumaric acid from glucose.

P-coumaric acid (p-CA), a pant metabolite with antioxidant and anti-inflammatory activity, is extensively utilized in biomedicine, food, and cosmetics industry. In this study, a synthetic pathway (PAL) for p-CA was designed, integrating three enzymes (AtPAL2, AtC4H, AtATR2) into a higher l-phenylalanine-producing strain Escherichia coli PHE05. However, the lower soluble expression and activity of AtC4H in the PAL pathway was a bottleneck for increasing p-CA titers. To overcome this limitation, the soluble expression of AtC4H was enhanced through N-terminal modifications. And an optimal mutant, AtC4HL373T/G211H, which exhibited a 4.3-fold higher kcat/Km value compared to the wild type, was developed. In addition, metabolic engineering strategies were employed to increase the intracellular NADPH pool. Overexpression of ppnk in engineered E. coli PHCA20 led to a 13.9-folds, 1.3-folds, and 29.1% in NADPH content, the NADPH/NADP+ ratio and p-CA titer, respectively. These optimizations significantly enhance p-CA production, in a 5-L fermenter using fed-batch fermentation, the p-CA titer, yield and productivity of engineered strain E. coli PHCA20 were 3.09 g/L, 20.01 mg/g glucose, and 49.05 mg/L/h, respectively. The results presented here provide a novel way to efficiently produce the plant metabolites using an industrial strain.

Four novel Acinetobacter lwoffii strains isolated from the milk of cows in China with subclinical mastitis.

BACKGROUND: Acinetobacter lwoffii (A. lwoffii) is a Gram-negative bacteria common in the environment, and it is the normal flora in human respiratory and digestive tracts. The bacteria is a zoonotic and opportunistic pathogen that causes various infections, including nosocomial infections. The aim of this study was to identify A. lwoffii strains isolated from bovine milk with subclinical mastitis in China and get a better understanding of its antimicrobial susceptibility and resistance profile. This is the first study to analyze the drug resistance spectrum and corresponding mechanisms of A. lwoffii isolated in raw milk. RESULTS: Four A. lwoffii strains were isolated by PCR method. Genetic evolution analysis using the neighbor-joining method showed that the four strains had a high homology with Acinetobacter lwoffii. The strains were resistant to several antibiotics and carried 17 drug-resistance genes across them. Specifically, among 23 antibiotics, the strains were completely susceptible to 6 antibiotics, including doxycycline, erythromycin, polymyxin, clindamycin, imipenem, and meropenem. In addition, the strains showed variable resistance patterns. A total of 17 resistance genes, including plasmid-mediated resistance genes, were detected across the four strains. These genes mediated resistance to 5 classes of antimicrobials, including beta-lactam, aminoglycosides, fluoroquinolones, tetracycline, sulfonamides, and chloramphenicol. CONCLUSION: These findings indicated that multi-drug resistant Acinetobacter lwoffii strains exist in raw milk of bovine with subclinical mastitis. Acinetobacter lwoffii are widespread in natural environmental samples, including water, soil, bathtub, soap box, skin, pharynx, conjunctiva, saliva, gastrointestinal tract, and vaginal secretions. The strains carry resistance genes in mobile genetic elements to enhance the spread of these genes. Therefore, more attention should be paid to epidemiological surveillance and drug resistant A. lwoffii.

Altered leptin level in autism spectrum disorder and meta-analysis of adipokines.

BACKGROUND: Increasing evidence suggests that leptin is involved in the pathology of autism spectrum disorder (ASD). In this study, our objective was to investigate the levels of leptin in the blood of children with ASD and to examine the overall profile of adipokine markers in ASD through meta-analysis. METHODS: Leptin concentrations were measured using an enzyme-linked immunosorbent assay (ELISA) kit, while adipokine profiling, including leptin, was performed via meta-analysis. Original reports that included measurements of peripheral adipokines in ASD patients and healthy controls (HCs) were collected from databases such as Web of Science, PubMed, and Cochrane Library. These studies were collected from September 2022 to September 2023 and followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. Standardized mean differences were calculated using a random effects model for the meta-analysis. Additionally, we performed meta-regression and explored heterogeneity among studies. RESULTS: Our findings revealed a significant increase in leptin levels in children with ASD compared to HCs (p = 0.0319). This result was consistent with the findings obtained from the meta-analysis (p < 0.001). Furthermore, progranulin concentrations were significantly reduced in children with ASD. However, for the other five adipokines analyzed, there were no significant differences observed between the children with ASD and HCs children. Heterogeneity was found among the studies, and the meta-regression analysis indicated that publication year and latitude might influence the results of the meta-analysis. CONCLUSIONS: These findings provide compelling evidence that leptin levels are increased in children with ASD compared to healthy controls, suggesting a potential mechanism involving adipokines, particularly leptin, in the pathogenesis of ASD. These results contribute to a better understanding of the pathology of ASD and provide new insights for future investigations.

Health economics study of paliperidone palmitate in the treatment of schizophrenia: a 12-month cohort study.

BACKGROUND: To analyze the economic benefits of paliperidone palmitate in the treatment of schizophrenia. METHODS: We collected 546 patients who met the diagnostic criteria for schizophrenia according to the 《International Statistical Classification of Diseases and Related Health Problems,10th》(ICD-10). We gathered general population data such as gender, age, marital status, and education level, then initiated treatment with paliperidone palmitate. Then Follow-up evaluations were conducted at 1, 3, 6, 9, and 12 months after the start of treatment to assess clinical efficacy, adverse reactions, and injection doses. We also collected information on the economic burden before and after 12 months of treatment, as well as the number of outpatient visits and hospitalizations in the past year to analyze economic benefits. RESULTS: The baseline patients totaled 546, with 239 still receiving treatment with paliperidone palmitate 12 months later. After 12 months of treatment, the number of outpatient visits per year increased compared to before (4 (2,10) vs. 12 (4,12), Z=-5.949, P < 0.001), while the number of hospitalizations decreased (1 (1,3) vs. 1 (1,2), Z = 5.625, P < 0.001). The inpatient costs in the direct medical expenses of patients after 12 months of treatment decreased compared to before (5000(2000,12000) vs. 3000 (1000,8050), P < 0.05), while there was no significant change in outpatient expenses and direct non-medical expenses (transportation, accommodation, meal, and family accompanying expenses, etc.) (P > 0.05); the indirect costs of patients after 12 months of treatment (lost productivity costs for patients and families, economic costs due to destructive behavior, costs of seeking non-medical assistance) decreased compared to before (300(150,600) vs. 150(100,200), P < 0.05). CONCLUSION: Palmatine palmitate reduces the number of hospitalizations for patients, as well as their direct and indirect economic burdens, and has good economic benefits.

Functional knee phenotypes appear to be more suitable for the Chinese OA population compared with CPAK classification: A study based on 3D CT reconstruction models.

PURPOSE: The aim of this study was to investigate the distribution of coronal plane alignment of the knee (CPAK) classification and functional knee phenotypes in a Chinese osteoarthritis (OA) population and to compare different lower limb alignment targets according to the distribution characteristics to find suitable total knee arthroplasty (TKA) bone cut strategies for the Chinese OA patients. METHODS: The computed tomography (CT) images were retrospectively collected and the three-dimensional (3D) models were reconstructed from 434 Chinese OA patients, including 93 males and 341 females, with a mean age of 66.4 ± 9.3 years. Femoral mechanical angle (FMA), tibial mechanical angle (TMA) and mechanical hip-knee-ankle angle (mHKA) were measured on the 3D models. Arithmetic hip-knee-ankle angle (aHKA) was calculated using FMA plus TMA, and joint line obliquity was calculated as 180 + TMA-FMA. The CPAK according to MacDessi and the functional knee phenotypes according to Hirschmann were performed. In addition, the suitable TKA bone cut strategies were explored according to the phenotypes and based on the characteristics of different alignment targets, such as mechanical alignment, anatomic alignment (AA), kinematic alignment, restricted KA (rKA) and adjusted MA (aMA). Statistical differences were determined using the independent-samples t-test or the two independent-samples Wilcoxon test, with p < 0.05 considered statistically significant. RESULTS: The Chinese OA population showed a varus alignment tendency (mHKA = 172.1° ± 7.2°), to which the TMA was a major contributor (TMA = 84.7° ± 4.4° vs. FMA = 91.3° ± 3.2°). The mHKA was on average 3.9° more varus than the aHKA. A total of 140 functional knee phenotypes were found and 45.6% were concentrated in VARFMA3°-NEUFMA0° to VARTMA3°-NEUTMA0°. More than 70% of patients had different FMA and TMA phenotypes. There were 92.9% of CPAK distributed in types I to IV, with type I accounting for 53.9%. The FMA phenotypes were less changed if the aMA and rKA were chosen, and the TMA phenotypes were less changed if the AA and rKA were chosen. CONCLUSION: Compared with the CPAK, the functional knee phenotypes were more suitable for the Chinese OA population with a wide distribution and a varus tendency, and it seemed more appropriate to choose aMA and rKA as TKA alignment targets for resection. LEVEL OF EVIDENCE: Level Ⅲ.

Early ontogenesis from embryo to juvenile in Senegalese sole Solea senegalensis under laboratory conditions.

Senegalese sole, Solea senegalensis, is a flatfish of high commercial value in the world. It has been identified as an interesting and promising species for marine commercial aquaculture diversification in Europe for at least four decades and was introduced to China in 2003. Early ontogenesis from embryo to juvenile stages in S. senegalensis was analysed under controlled laboratory conditions to provide morphological information for aquaculture. From 0 to 59 days post hatching (dph), 10-20 larvae were sampled and measured each day (0-17 dph) or every 2-6 days (17-59 dph). Morphological characteristics from the egg to the juvenile stage were described. The eggs were separate and spherical with multiple oil globules. After 3 dph, the yolk sac was completely absorbed, mouth and anus were open, a swim bladder appeared, and larvae began feeding on rotifers (Brachionus plicatilis). The larvae began metamorphosis as the notochord flexed upward and the left eye migrated upward after 10 dph. The left eye migrated to the dorsal midline at 15 dph. At 19 dph, the left eye was translocated to the right-ocular side, and the juveniles adopted a benthic lifestyle. The swim bladder degenerated, and the juveniles completed metamorphosis at 23 dph. The growth patterns of some parameters (TL, SL, BH, BW) during larval and juvenile development stages were identified. The inflection points, which are slopes of growth changes, were calculated in growth curves. Three inflection points occurring in the growth curves of larvae and juveniles were found to be associated with metamorphosis, weaning, and transitions in feeding habits. The basic information of embryo development and ontogenesis in this study represents a valuable contribution to the S. senegalensis industry, especially in artificial breeding and rearing techniques.

Recent advances and new insights on the construction of photocatalytic systems for environmental disinfection.

Photocatalysis, as a sustainable and environmentally friendly green technology, has garnered widespread recognition and application across various fields. Especially its potential in environmental disinfection has been highly valued by researchers. This study commences with foundational research on photocatalytic disinfection technology and provides a comprehensive overview of its current developmental status. It elucidates the complexity of the interface reaction mechanism between photocatalysts and microorganisms, providing valuable insights from the perspectives of materials and microorganisms. This study reviews the latest design and modification strategies (Build heterojunction, defect engineering, and heteroatom doping) for photocatalysts in environmental disinfection. Moreover, this study investigates the research focuses and links in constructing photocatalytic disinfection systems, including photochemical reactors, light sources, and material immobilization technologies. It studies the complex challenges and influencing factors generated by different environmental media during the disinfection process. Simultaneously, a comprehensive review extensively covers the research status of photocatalytic disinfection concerning bacteria, fungi, and viruses. It reveals the observable efficiency differences caused by the microstructure of microorganisms during photocatalytic reactions. Based on these influencing factors, the economy and effectiveness of photocatalytic disinfection systems are analyzed and discussed. Finally, this study summarizes the current application status of photocatalytic disinfection products. The challenges faced by the synthesis and application of future photocatalysts are proposed, and the future development in this field is discussed. The potential for research and innovation has been further emphasized, with the core on improving efficiency, reducing costs, and strengthening the practical application of photocatalysis in environmental disinfection.

Deep eutectic solvents pretreatment enhances methane production from anaerobic digestion of waste activated sludge: Effectiveness evaluation and mechanism elucidation.

Anaerobic digestion (AD) is a prevalent waste activated sludge (WAS) treatment, and optimizing methane production is a core focus of AD. Two DESs were developed in this study and significantly increased methane production, including choline chloride-urea (ChCl-Urea) 390% and chloride-ethylene glycol (ChCl-EG) 540%. Results showed that ChCl-Urea mainly disrupted extracellular polymeric substances (EPS) structures, aiding in initial sludge solubilization during pretreatment. ChCl-EG, instead, induced sludge self-driven organic solubilization and enhanced hydrolysis and acidification processes during AD process. Based on the extent to which the two DESs promoted AD for methane production, the AD process can be divided into stage Ⅰ and stage Ⅱ. In stage Ⅰ, ChCl-EG promoted methanogenesis more significantly, microbiological analysis showed both DESs enriched aceticlastic methanogens-Methanosarcina. Notably, ChCl-Urea particularly influenced polysaccharide-related metabolism, whereas ChCl-EG targeted protein-related metabolism. In stage Ⅱ, ChCl-Urea was more dominant than ChCl-EG, ChCl-Urea bolstered metabolism and ChCl-EG promoted genetic information processing in this stage. In essence, this study investigated the microbial mechanism of DES-enhanced sludge methanogenesis and provided a reference for future research.

Rational Design of the Spatial Effect in a Fe(II)/α-Ketoglutarate-Dependent Dioxygenase Reverses the Regioselectivity of C(sp3)-H Bond Hydroxylation in Aliphatic Amino Acids.

The hydroxylation of remote C(sp3)-H bonds in aliphatic amino acids yields crucial precursors for the synthesis of high-value compounds. However, accurate regulation of the regioselectivity of remote C(sp3)-H bonds hydroxylation in aliphatic amino acids continues to be a common challenge in chemosynthesis and biosynthesis. In this study, the Fe(II)/α-ketoglutarate-dependent dioxygenase from Bacillus subtilis (BlAH) was mined and found to catalyze hydroxylation at the γ and δ sites of aliphatic amino acids. Crystal structure analysis, molecular dynamics simulations, and quantum chemical calculations revealed that regioselectivity was regulated by the spatial effect of BlAH. Based on these results, the spatial effect of BlAH was reconstructed to stabilize the transition state at the δ site of aliphatic amino acids, thereby successfully reversing the γ site regioselectivity to the δ site. For example, the regioselectivity of L-Homoleucine (5 a) was reversed from the γ site (1 : 12) to the δ site (>99 : 1). The present study not only expands the toolbox of biocatalysts for the regioselective functionalization of remote C(sp3)-H bonds, but also provides a theoretical guidance for the precision-driven modification of similarly remote C(sp3)-H bonds in complex molecules.

Comprehensively analysis of splicing factors to construct prognosis prediction classifier in prostate cancer.

Splicing factors (SFs) are proteins that control the alternative splicing (AS) of RNAs, which have been recognized as new cancer hallmarks. Their dysregulation has been found to be involved in many biological processes of cancer, such as carcinogenesis, proliferation, metastasis and senescence. Dysregulation of SFs has been demonstrated to contribute to the progression of prostate cancer (PCa). However, a comprehensive analysis of the prognosis value of SFs in PCa is limited. In this work, we systematically analysed 393 SFs to deeply characterize the expression patterns, clinical relevance and biological functions of SFs in PCa. We identified 53 survival-related SFs that can stratify PCa into two de nove molecular subtypes with distinct mRNA expression and AS-event expression patterns and displayed significant differences in pathway activity and clinical outcomes. An SF-based classifier was established using LASSO-COX regression with six key SFs (BCAS1, LSM3, DHX16, NOVA2, RBM47 and SNRPN), which showed promising prognosis-prediction performance with a receiver operating characteristic (ROC) >0.700 in both the training and testing datasets, as well as in three external PCa cohorts (DKFZ, GSE70769 and GSE21035). CRISPR/CAS9 screening data and cell-level functional analysis suggested that LSM3 and DHX16 are essential factors for the proliferation and cell cycle progression in PCa cells. This study proposes that SFs and AS events are potential multidimensional biomarkers for the diagnosis, prognosis and treatment of PCa.

Anti-HER2 scFv-nCytc-Modified Lipid-Encapsulated Oxygen Nanobubbles Prepared with Bulk Nanobubble Water for Inducing Apoptosis and Improving Photodynamic Therapy.

Bulk nanobubbles fascinate scientists because of their stability over long periods of time and their ability to carry gases, leading to numerous potential applications. Considering the hypoxic tumor microenvironment and the advantages of bulk nanobubbles, lipid-encapsulated oxygen nanobubbles are prepared from free bulk oxygen nanobubbles in this study. The obtained carrier is then modified with a protein fused with the single-chain antibody of human epidermal growth factor receptor 2 (anti-HER2 scFv) and tandem-repeat cytochrome c (anti-HER2 scFv-nCytc) to enhance tumor targeting and induce tumor apoptosis. Copper phthalocyanine is used as the photosensitizer to demonstrate how the oxygen in the nanobubbles affects the efficiency of photodynamic therapy (PDT). The combination of anti-HER2 scFv-nCytc and PDT synergistically improves the therapeutic effect and alleviates hypoxia in tumors in vivo while causing little inflammatory response. Based on the findings, bulk nanobubble water shows promise in the targeted delivery of oxygen and can be combined with antibody therapy to enhance the efficiency of PDT.

Efficient Production of Epoxy-Norbornane from Norbornene by an Engineered P450 Peroxygenase.

Epoxy-norbornane (EPO-NBE) is a crucial building block for the synthesis of various biologically active heterocyclic systems. To develop an efficient protocol for producing EPO-NBE using norbornene (NBE) as a substrate, cytochrome P450 enzyme from Pseudomonas putida (CYP238A1) was examined and its crystal structure (PDB code: 7X53) was resolved. Molecular mechanism analysis showed a high energy barrier related to iron-alkoxy radical complex formation. Therefore, a protein engineering strategy was developed and an optimal CYP238A1NPV variant containing a local hydrophobic "fence" at the active site was obtained, which increased the H2 O2 -dependent epoxidation activity by 7.5-fold compared with that of CYP238A1WT . Among the "fence", Glu255 participates in an efficient proton transfer system. Whole-cell transformation using CYP238A1NPV achieved an EPO-NBE yield of 77.6 g ⋅ L-1 in a 30-L reactor with 66.3 % conversion. These results demonstrate the potential of this system for industrial production of EPO-NBE and provides a new biocatalytic platform for epoxidation chemistry.

A Tri-Enzyme Cascade for Efficient Production of L-2-Aminobutyrate from L-Threonine.

L-2-aminobutyrate (L-ABA) is an important chiral drug intermediate with a key role in modern medicinal chemistry. Here, we describe the development of an efficient method for the asymmetric synthesis of L-ABA in a tri-enzymatic cascade in Escherichia coli BL21 (DE3) using a cost-effective L-Thr. Low activity of leucine dehydrogenase from Bacillus thuringiensis (BtLDH) and unbalanced expression of enzymes in the cascade were major challenges. Mechanism-based protein engineering generated the optimal triple variant BtLDHM3 (A262S/V296C/P150M) with 20.7-fold increased specific activity and 9.6-fold increased kcat /Km compared with the wild type. Optimizing plasmids with different copy numbers regulated enzymatic expression, thereby increasing the activity ratio (0.3 : 1:0.6) of these enzymes in vivo close to the optimal ratio (0.4 : 1 : 1) in vitro. Importing the optimal triple mutant BtLDHM3 into our constructed pathway in vivo and optimization of transformation conditions achieved one-pot conversion of L-Thr to 130.2 g/L L-ABA, with 95 % conversion, 99 % e.e. and 10.9 g L-1 h-1 productivity (the highest to date) in 12 h on a 500 mL scale. These results describe a potential biosynthesis approach for the industrial production of L-ABA.

Systems engineering of Escherichia coli for high-level shikimate production.

To further increase the production efficiency of microbial shikimate, a valuable compound widely used in the pharmaceutical and chemical industries, ten key target genes contributing to shikimate production were identified by exploiting the enzyme constraint model ec_iML1515, and subsequently used for promoting metabolic flux towards shikimate biosynthesis in the tryptophan-overproducing strain Escherichia coli TRP0. The engineered E. coli SA05 produced 78.4 g/L shikimate via fed-batch fermentation. Deletion of quinate dehydrogenase and introduction of the hydroaromatic equilibration-alleviating shikimate dehydrogenase mutant AroET61W/L241I reduced the contents of byproducts quinate (7.5 g/L) and 3-dehydroshikimic acid (21.4 g/L) by 89.1% and 52.1%, respectively. Furthermore, a high concentration shikimate responsive promoter PrpoS was recruited to dynamically regulate the expression of the tolerance target ProV to enhance shikimate productivity by 23.2% (to 2 g/L/h). Finally, the shikimate titer was increased to 126.4 g/L, with a yield of 0.50 g/g glucose and productivity of 2.63 g/L/h, using a 30-L fermenter and the engineered strain E. coli SA09. This is, to the best of our knowledge, the highest reported shikimate titer and productivity in E. coli.

A Multi-Enzyme Cascade for Efficient Production of Pyrrolidone from l-Glutamate.

Pyrrolidone is a high value-added monomer and an important active drug intermediate. However, the efficient enzymatic synthesis of pyrrolidone remains a challenge. Here, we developed and reconstructed a three-enzyme cascade pathway using Escherichia coli BL21(DE3) for the production of pyrrolidone from l-glutamate (l-Glu). The carnitine-CoA ligase from Escherichia coli (EcCaiC) at a low expression level and with a low activity is regarded as the rate-limiting enzyme. Here, we obtained the best EcCaiCF380M/N430D double mutant with a kcat/Km value 1.5 times higher than that of the wild type via mechanism-based protein engineering. For this, we (i) eliminated the steric hindrance of the loop ring to improve the precatalytic conformation of the adenylation intermediate and (ii) fixed the hinge region to stabilize the closed conformation of the enzyme. Furthermore, ribosome-binding site (RBS) optimization led to an increase in the expression level of EcCaiCF380M/N430D, which was then cloned into the plasmid pET-EcCaiCF380M/N430D-DegoPPK2. Finally, under optimal induction and transformation conditions, 16.62 g/L of pyrrolidone was generated from 30 g/L l-Glu (batch feeding) within 24 h with a molar conversion rate of 95.2% and the highest productivity ever obtained, to our knowledge (0.69 g/L/h). Our findings demonstrate a strategy that is potentially attractive for the industrial production of pyrrolidone. IMPORTANCE This study developed a three-enzyme cascade pathway for the production of pyrrolidone from l-Glu. The catalytic efficiency of carnitine CoA ligase from Escherichia coli (EcCaiC) was improved by mechanism-based protein engineering, and the titer of pyrrolidone was further increased by ribosome-binding site (RBS), induction conditions, and conversion conditions optimization. Finally, we efficiently produced pyrrolidone by one pot in vivo with 95.2% conversion and 0.69 g/L/h productivity. Our study provides a new possibility for the industrial production of enzymatic synthesis of pyrrolidone.

Rational Design of Meso-Diaminopimelate Dehydrogenase with Enhanced Reductive Amination Activity for Efficient Production of d-p-Hydroxyphenylglycine.

d-p-hydroxyphenylglycine (d-HPG) is an important intermediate in the pharmaceutical industry. In this study, a tri-enzyme cascade for the production of d-HPG from l-HPG was designed. However, the amination activity of Prevotella timonensis meso-diaminopimelate dehydrogenase (PtDAPDH) toward 4-hydroxyphenylglyoxylate (HPGA) was identified as the rate-limiting step. To overcome this issue, the crystal structure of PtDAPDH was solved, and a "binding pocket and conformation remodeling" strategy was developed to improve the catalytic activity toward HPGA. The best variant obtained, PtDAPDHM4, exhibited a catalytic efficiency (kcat/Km) that was 26.75-fold higher than that of the wild type. This improvement was due to the enlarged substrate-binding pocket and enhanced hydrogen bond networks around the active center; meanwhile, the increased number of interdomain residue interactions drove the conformation distribution toward the closed state. Under optimal transformation conditions, PtDAPDHM4 produced 19.8 g/L d-HPG from 40 g/L racemate DL-HPG in a 3 L fermenter within 10 h, with 49.5% conversion and >99% enantiomeric excess. Our study provides an efficient three-enzyme cascade pathway for the industrial production of d-HPG from racemate DL-HPG. IMPORTANCE d-p-hydroxyphenylglycine (d-HPG) is an important intermediate in the synthesis of antimicrobial compounds. d-HPG is mainly produced via chemical and enzymatic approaches, and enzymatic asymmetric amination employing diaminopimelate dehydrogenase (DAPDH) is considered an attractive method. However, the low catalytic activity of DAPDH toward bulky 2-keto acids limits its applications. In this study, we identified a DAPDH from Prevotella timonensis and created a mutant, PtDAPDHM4, which exhibited a catalytic efficiency (kcat/Km) toward 4-hydroxyphenylglyoxylate that was 26.75-fold higher than that of the wild type. The novel strategy developed in this study has practical value for the production of d-HPG from inexpensive racemate DL-HPG.

Linear photogalvanic effects in monolayer ternary metallic compound Na2MgSn.

The linear photogalvanic effect (LPGE) is investigated by using the non-equilibrium Green's function (NEGF) technique combined with density functional theory (DFT) in monolayer Na2MgSn. We consider the cases of three different central regions, which are pure Na2MgSn, Na-vacancy, and Pb-substituted. It is found that both pure and defective Na2MgSn monolayers induce photoresponse under linearly polarized light. The photoresponse varies periodically as a form of either sinusoidal or cosinoidal function of the polarization angle. In the near-infrared and visible ranges, the photoresponse is more sensitive to the long wave range of visible light. In the case of single-atom defects, the photoresponse with Na-vacancy is larger than that of pb-substitution defects. Compared with the other two central regions, the maximum extinction ratio (ER) of Na-vacancy is larger, so it has higher polarization sensitivity. When the location of Na-vacancy is adjusted, the photoresponse changes obviously, and the Na 1*- vacancy has the largest photoresponse. With the increase of the Na-vacancy concentration, the photoresponse changes nonlinearly but is smaller than that of a single vacancy. A small bias voltage can greatly improve the photoresponse. Our results suggest an effective method to enhance the photoresponse and show the promise of Na2MgSn monolayers in optical detection.