Coping with groundwater pollution in high-nitrate leaching areas: The efficacy of denitrification.

The Ningxia Yellow River irrigation area, characterized by an arid climate and high leaching of NO3--N, exhibits complex and unique groundwater nitrate (NO3--N) pollution, with denitrification serving as the principal mechanism for NO3--N removal. The characteristics of N leaching from paddy fields and NO3--N removal by groundwater denitrification were investigated through a two-year field observation. The leaching losses of total nitrogen (TN) and NO3--N accounted for 10.81-27.34% and 7.59-12.74%, respectively, of the N input. The linear relationship between NO3--N leaching and N input indicated that the fertilizer-induced emission factor (EF) of NO3--N leaching in direct dry seeding and seedling-raising and transplanting paddy fields was 8.2% (2021, R2 = 0.992) and 6.7% (2022, R2 = 0.994), respectively. The study highlighted that the quadratic relationship between the NO3--N leaching loss and N input (R2 = 0.999) significantly outperformed the linear relationship. Groundwater denitrification capacity was characterized by monitoring the concentrations of dinitrogen (N2) and nitrous oxide (N2O). The results revealed substantial seasonal fluctuations in excess N2 and N2O concentrations in groundwater, particularly following fertilization and irrigation events. The removal efficiency of NO3--N via groundwater denitrification ranged from 42.70% to 74.38%, varying with depth. Groundwater denitrification capacity appeared to be linked to dissolved organic carbon (DOC) concentration, redox conditions, fertilization, irrigation, and soil texture. The anthropogenic-alluvial soil with limited water retention accelerated the leaching of NO3--N into groundwater during irrigation. This process enhances the groundwater recharge capacity and alters the redox conditions of groundwater, consequently impacting groundwater denitrification activity. The DOC concentration emerged as the primary constraint on the groundwater denitrification capacity in this region. Hence, increasing carbon source concentration and enhancing soil water retention capacity are vital for improving the groundwater denitrification capacity and NO3--N removal efficiency. This study provides practical insights for managing groundwater NO3--N pollution in agricultural areas, optimizing fertilization strategies and improving groundwater quality.

Performance of five plant species in removal of nitrogen and phosphorus from an experimental phytoremediation system in the Ningxia irrigation area.

Agricultural non-point source (ANPS) pollution is an important contributor to elevated nitrogen (N) and phosphorus (P) in surface waters, which can cause serious environmental problems. Considerable effort has therefore gone into the development of methods that control the ANPS input of N and P to surface waters. Phytoremediation has been extensively used because it is cost-effective, environmentally friendly, and efficient. The N and P loads from agricultural drainage are a potential threat to the water quality of the Yellow River in Ningxia, China. Yet, phytoremediation has only rarely been applied within the Ningxia irrigation area. In an experimental set-up, five species (Ipomoea aquatica, IA; Lactuca sativa, LS; Oryza sativa, OS; Typha latifolia, TL; Zizania latifolia, ZL) were evaluated for their ability to reduce N and P loads over 62 days and five observation periods. Total N and P concentrations, plant biomass, and nutrient content were measured. The results showed that OS, LS, and IA performed better than ZL and TL in terms of nutrients removal, biomass accumulation, and nutrients storage. The highest overall removal rates of N and P (57.7 and 57.3%, respectively) were achieved by LS treatment. In addition, plant uptake contributed significantly to nutrient removal, causing a 25.9-72.0% reduction in N removal and a 54.3-86.5% reduction in P removal. Thus, this study suggests that OS, LS, and IA would be more suitable than ZL and TL for controlling nutrient loads in the Ningxia irrigation area using phytoremediation.

Regulating N application for rice yield and sustainable eco-agro development in the upper reaches of Yellow River basin, China.

High N fertilizer and flooding irrigation applied to rice on anthropogenic-alluvial soil often result in N leaching and low recovery of applied fertilizer N from the rice fields in Ningxia irrigation region in the upper reaches of the Yellow River, which threatens ecological environment, food security, and sustainable agricultural development. This paper reported the regulating N application for rice yield and sustainable Eco-Agro development in the upper reaches of Yellow River basin. The results showed that reducing and postponing N application could maintain crop yields while substantially reducing N leaching losses to the environment and improving the nitrogen use efficiency. Considering the high food production, the minimum environmental threat, and the low labor input, we suggested that regulating N application is an important measure to help sustainable agricultural development in this region.

A Thiol Branched 3D Network Quasi Solid-State Polymer Electrolyte Reinforced by Covalent Organic Frameworks for Lithium Metal Batteries.

Quasi solid-state polymer electrolytes (QSPEs) are particularly attractive due to their high ionic conductivity and excellent safety for lithium metal batteries (LMBs). However, it is still a great challenge for QSPEs to achieve strong mechanical strength and high electrochemical performance simultaneously. Herein, a QSPE (SCOF-PEP-PEA) using a covalent organic framework (COF) containing abundant allyl groups (SCOF) as a rigid porous filler as well as a cross-linker to reinforce the polymer network is reported. Benefitting from the unique 3D nanonetwork structure and abundant lithiophilic functional groups, SCOF-PEP-PEA QSPE exhibits high ionic conductivity (4.0 × 10-4 S cm-1) and high lithium-ion transference number (0.82) at room temperature. Moreover, SCOF-PEP-PEA QSPE displays much improved mechanical strength compared to PEP-PEA QSPE (AFM Young's modulus: 453 vs 36 MPa). As a result, the Li/LFP full cell with SCOF-PEP-PEA QSPE shows great rate performance of 141 mAh g-1 at 1C and delivers a high specific capacity retention of 92% after 220 cycles at 0.5 C (60 °C). This work provides a new strategy to design and prepare high-performance QSPEs with COFs as porous organic filler, and further expand the application of COFs for energy storage applications.

Yield, Quality, and Nitrogen Leaching of Open-Field Tomato in Response to Different Nitrogen Application Measures in Northwestern China.

The overuse of fertilizers in open-field tomato leads to soil deterioration through nutrient leaching and increases the risk of agricultural non-point source contamination. Currently, the combined effects of different fertilization methods on soil nitrogen leaching and tomato production are still unclear. Therefore, the most effective fertilization method for open-field tomato should be discovered by examining how different fertilization methods affected tomato yield and quality, nitrogen use efficiency (NUE), and soil nitrogen leaching. Compared with CK (no fertilization), fertilization significantly increased the yield, total sugar (TS), total soluble solids (TSS), and vitamin C (vC) contents of fruits (p < 0.05), and OPT (optimal fertilization, controlled release nitrogen application, 240 kg ha-1) had the largest effect on increasing yield, quality, and net profit. However, when the fertilizer application rate reached 375 kg ha-1, these indices decreased. Nitrogen leaching concentrations, leaching amount, and titratable acids (TAs) increased with increased nitrogen application rates. Compared with other treatments, OPT reduced the total leaching amounts of total nitrogen (TN), nitrate nitrogen (NO3--N), and ammonia nitrogen (NH4+-N) by 30.09-51.79%, 24.89-50.03%, and 30-65%, respectively. Principal component analysis (PCA) showed that OPT achieved the highest overall score in terms of yield, quality, and nitrogen leaching conditions. The partial least squares path modeling (PLS-PM) further reveals that applications of high amounts of nitorigen have a positive effect on soil nitrogen leaching. The amount of nitrogen leaching vegetatively affects tomato yield and quality, while plant uptake of nitrogen positively affects tomato production. These findings confirm the importance of using controlled-release fertilizers and reducing nitrogen inputs to control nitrogen leaching and enhance open-field tomato yields.

Ditch level-dependent N removal capacity of denitrification and anammox in the drainage system of the Ningxia Yellow River irrigation district.

Drainage networks, consisting of different levels of ditches, play a positive role in removing reactive nitrogen (N) via self-purification before drainage water returns to natural water bodies. However, relatively little is known about the N removal capacity of irrigation agricultural systems with different drainage ditch levels. In this study, we employed soil core incubation and soil slurry 15N paired tracer techniques to investigate the N removal rate (i.e., N2 flux), denitrification, anaerobic ammonium oxidation (anammox), and dissimilatory nitrate reduction to ammonium (DNRA) rates in the Ningxia Yellow River irrigation district at various ditch levels, including field ditches (FD), paddy field ditches (PFD), lateral ditches (LD1 and LD2), branch ditches (BD1, BD2, BD3), and trunk ditches (TD). The results indicated that the N removal rate ranged from 44.7 to 165.22 nmol N g-1 h-1 in the ditches, in the following decreasing order: trunk ditches > branch ditches > paddy field ditches > lateral ditches > field ditches. This result suggested that the N removal rate in drainage ditches is determined by the ditch level. In addition, denitrification and anammox were the primary pathways for N removal in the ditches, contributing 68.40-76.64 % and 21.55-30.29 %, respectively, to the total N removal. In contrast, DNRA contributed only 0.82-2.15 % to the total nitrate reduction. The N removal rates were negatively correlated with soil EC and pH and were also constrained by the abundances of denitrification functional genes. Overall, our findings suggest that the ditch level should be considered when evaluating the N removal capacity of agricultural ditch systems.

Topological Defect-Regulated Porous Carbon Anodes with Fast Interfacial and Bulk Kinetics for High-Rate and High-Energy-Density Potassium-Ion Batteries.

Carbonaceous materials are regarded as one of the most promising anodes for potassium-ion batteries (PIBs), but their rate capabilities are largely limited by the slow solid-state potassium diffusion kinetics inside anode and sluggish interfacial potassium ion transfer process. Herein, high-rate and high-capacity PIBs are demonstrated by facile topological defect-regulation of the microstructure of carbon anodes. The carbon lattice of the as-obtained porous carbon nanosheets (CNSs) with abundant topological defects (TDPCNSs) holds relatively high potassium adsorption energy yet low potassium migration barrier, thereby enabling efficient storage and diffusion of potassium inside graphitic layers. Moreover, the topological defects can induce preferential decomposition of anions, leading to the formation of high potassium ion conductive solid electrolyte interphase (SEI) film with decreased potassium ion de-solvation and transfer barrier. Additionally, the dominant sp2-hybridized carbon conjugated skeleton of TDPCNSs enables high electrical conductivity (39.4 S cm-1) and relatively low potassium storage potential. As a result, the as-constructed TDPCNSs anode demonstrates high potassium storage capacity (504 mA h g-1 at 0.1 A g-1), remarkable rate capability (118 mA h g-1 at 40 A g-1), as well as long-term cycling stability.

Exploring dissolved N2O characteristics and unearthing indirect N2O emission factors in the shallow groundwater of paddy and upland fields.

Indirect emissions of nitrous oxide (N2O) stemming from nitrogen (N) leaching in agricultural fields constitute a significant contributor to atmospheric N2O. Groundwater nitrate (NO3--N) pollution is severe in the Ningxia Yellow River Irrigation Area (NYRIA), coupled with high NO3--N leaching, exacerbates the risk of indirect N2O emissions from groundwater. Over two years of field observations, this study investigated the characteristics and interannual variations of dissolved N2O (dN2O) concentrations and indirect N2O emission factors (EF5g) in shallow groundwater. The research focused on three typical farmlands in the NYRIA, each subjected to six levels of N fertilizer application. The mean dN2O concentrations in the groundwater of paddy, corn and vegetable fields were 5.17, 8.40 and 16.35 µg N·L-1, respectively. Notably, the dN2O concentrations in the shallow groundwater of upland fields exceeded those in paddy fields, with maximum levels in vegetable fields nearly an order of magnitude higher. Elevated N application significantly increased dN2O concentrations across various farmlands, showing statistically significant variation. However, differences in EF5g-A and EF5g-B within the same farmland were negligible. Denitrification was the primary process contributing to N2O production in groundwater, with nitrification also played a crucial role in upland fields. Factors such as NO3--N, NH4+-N, dissolved oxygen (DO), and pH critically influenced N2O production. EF5g-B, which considers the NO3--N consumption during denitrification processes in groundwater, was deemed more appropriate than EF5g-A for assessing the indirect N2O emission in the NYRIA. The EF5g of agricultural fields exhibited minimal sensitivity to N input but was significantly affected by other factors, such as the planting pattern. The study revealed the rationality of adopting EF5g-B in assessing indirect N2O emissions, providing valuable insights for N management strategies in regions with high NO3--N leaching. Minimizing N fertilizer application while ensuring crop yield, especially in upland fields, is beneficial for reducing N2O emissions.

Controlled-release urea application and optimized nitrogen applied strategy reduced nitrogen leaching and maintained grain yield of paddy fields in Northwest China.

Nitrogen loss from paddy fields contributes to most of the nitrogen pollution load in the Ningxia Yellow River irrigation area, threatening the water quality of the Yellow River. Consequently, optimizing the nitrogen management practices in this area is essential, which can maintain paddy grain productivity and reduce nitrogen loss simultaneously. Five treatments with different nitrogen application rates and nitrogen fertilizer types were set in this study, including conventional urea application with zero nitrogen application rate (CK, 0 kg hm-2), nitrogen expert-based fertilization application strategy (NE, 210 kg hm-2), optimized nitrogen fertilizer application strategy recommended by local government (OPT, 240 kg hm-2), and farmer's experience-based nitrogen fertilizer application strategy (FP, 300 kg hm-2), and controlled-release urea application (CRU, 180 kg hm-2). The data from one growth season field experiment in 2021 revealed the dynamics of nitrogen concentration, paddy yield and its nitrogen uptake characteristic, and nitrogen balance in the paddy field under different nitrogen application practices. Most nitrogen leaching was observed during the seedling and tillering stages in the form of nitrate nitrogen (NO3 -N). Compared with the FP, the CRU and OPT significantly reduced the nitrogen concentrations of total nitrogen (TN), ammonium nitrogen (NH4 +-N), and NO3 -N in the surface and soil water and reduced the nitrogen leaching at 100 cm soil depth. Meanwhile, the paddy grain yield in CRU (7737 kg hm-2) and OPT (7379 kg hm-2) was not significantly decreased compared with FP (7918 kg hm-2), even though the nitrogen uptake by grain and straw was higher in FP (135 kg hm-2) than in other treatments (52.10~126.40 kg hm-2). However, the grain yield in NE (6972 kg hm-2) was decreased compared with the FP. The differences in grain yield among these treatments were mainly attributed to the ear number and grain number changes. Also, the highest nitrogen use efficiency (40.14%), apparent nitrogen efficiency (19.53 kg kg-1), and nitrogen partial productivity (43.98 kg kg-1) were identified in CRU than in other treatments. Considering increased grain yield and reducing nitrogen loss in the paddy field simultaneously, the treatments of CRU (i.e., 180 kg hm-2 nitrogen application rate with controlled-release urea) and OPT (i.e., 240 kg hm-2 nitrogen application rate with conventional urea) were recommended for nitrogen fertilizer application in the study area.

Recent advances in supramolecular self-assembly derived materials for high-performance supercapacitors.

The key preponderance of supramolecular self-assembly strategy is its ability to precisely assemble various functional units at the molecular level through non-covalent bonds to form multifunctional materials. Supramolecular materials have the merits of diverse functional groups, flexible structure, and unique self-healing properties, which make them of great value in the field of energy storage. This paper reviews the latest research progress of the supramolecular self-assembly strategy for the advanced electrode materials and electrolytes for supercapacitors, including supramolecular self-assembly for the preparation of high-performance carbon materials, metal-based materials and conductive polymer materials, and its beneficial effects on the performance of supercapacitors. The preparation of high performance supramolecular polymer electrolytes and their application in flexible wearable devices and high energy density supercapacitors are also discussed in detail. In addition, at the end of this paper, the challenges of the supramolecular self-assembly strategy are summarized and the development of supramolecular-derived materials for supercapacitors is prospected.

Aqueous Supramolecular Binder for High-Performance Lithium-Sulfur Batteries.

Developing an advanced electrode structure is highly important for obtaining lithium sulfur (Li-S) batteries with long life, low cost, and environmental friendliness. Some bottlenecks, such as large volume deformation and environmental pollution caused by the electrode preparation process, are still hindering the practical application of Li-S batteries. In this work, a new water-soluble, green, and environmentally friendly supramolecular binder (HUG) is successfully synthesized by modifying natural biopolymer (guar gum, GG) with HDI-UPy (cyanate containing pyrimidine groups). HUG can effectively resist electrode bulk deformation through a the unique three-dimensional nanonet-structure formed via covalent bonds and multiple hydrogen bonds. In addition, abundant polar groups of HUG have good adsorption properties for polysulfide and can inhibit the shuttle movement of polysulfide ions. Therefore, Li-S cell with HUG exhibits a high reversible capacity of 640 mAh g-1 after 200 cycles at 1C with a Coulombic efficiency of 99%.

Anionic Anchoring Enhanced Quasi Solid Composite Polymer Electrolytes for High Performance Lithium Metal Battery.

Herein, ZIF-8 inorganic particles with different sized reinforced poly (vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) solid composite polymer electrolytes (PVDF-HFP/10%ZIF-8) were prepared via a facile blade-coating approach, and free-standing quasi solid-state composite electrolytes (PVDF-HFP/10%ZIF-8(0.6)/Plasticizer, abbreviated as PH/10%ZIF-8(0.6)/P), were further obtained through the introduction of plasticizer. Optimized PH/10%ZIF-8(0.6)/P exhibited a high ionic conductivity of 2.8 × 10-4 S cm-1 at 30 °C, and superior Li+ transfer number of 0.89 with an ultrathin thickness (26 µm). Therefore, PH/10%ZIF-8(0.6)/P could effectively inhibit the growth of lithium dendrites, and the assembled Li/LiFePO4 cell delivered good cycling stability with a capacity retention rate of 89.1% after 100 cycles at 0.5 C.

Soil multifunctionality of paddy field is explained by soil pH rather than microbial diversity after 8-years of repeated applications of biochar and nitrogen fertilizer.

Biochar and nitrogen (N) fertilizer application can increase soil carbon sequestration and enhance soil nutrient cycling. However, few studies have systematically explored the effects of the long-term application of biochar and N fertilizer on soil multifunctionality and characterized its driving factors. Based on an 8-year biochar paddy-field experiment in anthropogenic alluvial alkaline soil in northwest China, we measured eleven soil functions associated with soil carbon sequestration and nutrient cycling and four potential factors (soil bacterial and fungal richness, pH, and aggregates) governing soil functions to investigate the effects of three biochar rates (C0, no biochar; C1, 4.5 t ha-1 year-1; C2, 13.5 t ha-1 year-1) and two N fertilizer rates (N0, no N fertilizer; N1, 300 kg N ha-1 year-1) on individual soil ecosystem functions and soil multifunctionality. Our results showed that biochar and N fertilizer application increased soil organic carbon (SOC) by 20-58 % and total N content by 9.3-15 % and had a varied effect (but mainly positive) on the activity of enzymes associated with soil carbon, N, and phosphorus cycling. Different application rates of biochar and N fertilizer had no influence on soil DNA concentrations, but did change soil microbial diversity, soil aggregation, and pH. The carbon storage function (SOC content) of soils is an important predictor of multifunctionality. Long-term biochar and N fertilizer application indirectly explained soil multifunctionality by altering soil pH, whereas bacterial and fungal diversity and soil aggregates did not play significant roles in explaining soil multifunctionality. These findings suggest that the application of biochar and N fertilizer can enhance soil multifunctionality by directly improving the individual functions [soil carbon sequestration (SOC content)] and decreasing soil pH in alkaline paddy fields.

A robust all-organic protective layer towards ultrahigh-rate and large-capacity Li metal anodes.

The low cycling efficiency and uncontrolled dendrite growth resulting from an unstable and heterogeneous lithium-electrolyte interface have largely hindered the practical application of lithium metal batteries. In this study, a robust all-organic interfacial protective layer has been developed to achieve a highly efficient and dendrite-free lithium metal anode by the rational integration of porous polymer-based molecular brushes (poly(oligo(ethylene glycol) methyl ether methacrylate)-grafted, hypercrosslinked poly(4-chloromethylstyrene) nanospheres, denoted as xPCMS-g-PEGMA) with single-ion-conductive lithiated Nafion. The porous xPCMS inner cores with rigid hypercrosslinked skeletons substantially increase mechanical robustness and provide adequate channels for rapid ionic conduction, while the flexible PEGMA and lithiated Nafion polymers enable the formation of a structurally stable artificial protective layer with uniform Li+ diffusion and high Li+ transference number. With such artificial solid electrolyte interphases, ultralong-term stable cycling at an ultrahigh current density of 10 mA cm-2 for over 9,100 h (>1 year) and unprecedented reversible lithium plating/stripping (over 2,800 h) at a large areal capacity (10 mAh cm-2) have been achieved for lithium metal anodes. Moreover, the protected anodes also show excellent cell stability when paired with high-loading cathodes (~4 mAh cm-2), demonstrating great prospects for the practical application of lithium metal batteries.

Dendrite-Free and Long-Cycling Lithium Metal Battery Enabled by Ultrathin, 2D Shield-Defensive, and Single Lithium-Ion Conducting Polymeric Membrane.

Polymeric membranes are considered as promising materials to realize safe and long-life lithium metal batteries (LMBs). However, they are usually based on soft 1D linear polymers and thus cannot effectively inhibit piercing of lithium dendrites at high current density. Herein, single lithium-ion conducting molecular brushes (GO-g-PSSLi) are successfully designed and fabricated with a new 2D "soft-hard-soft" hierarchical structure by grafting hairy lithium polystyrenesulfonate (PSSLi) chains on both sides of graphene oxide (GO) sheets. The ultrathin GO-g-PSSLi membrane is further constructed by evaporation-induced layer-by-layer self-assembly of GO-g-PSSLi molecular brushes. Unlike conventional soft 1D linear polymeric structure, the rigid 2D extended aromatic structure of intralayer GO backbones can bear the shield effect of preventing the dendrites possibly generated at high current density from piercing. More importantly, such a shield effect can be significantly strengthened by layer-by-layer stacking of 2D molecular brushes. On the other hand, the 3D interconnected interlayer channels and the soft single lithium-ion conducting PSSLi side-chains on the surface of channels provide rapid lithium-ion transportation pathways and homogenize lithium-ion flux. As a result, LMBs with GO-g-PSSLi membrane possess long-term reversible lithium plating/striping (6 months) at high current density.

Ultrathin Yet Robust Single Lithium-Ion Conducting Quasi-Solid-State Polymer-Brush Electrolytes Enable Ultralong-Life and Dendrite-Free Lithium-Metal Batteries.

Quasi-solid-state polymer electrolytes are one of the most promising candidates for long-life lithium-metal batteries. However, introduction of plasticizers for high ion conductivity at room temperature inevitably gives rise to poor mechanical strength and requires a very thick electrolyte membrane, which is detrimental to safety and energy density of the batteries. Herein, inspired by tube brushes coupling hardness with softness, a novel superstructured polymer bottlebrush BC-g-PLiSTFSI-b-PEGM (BC = bacterial cellulose; PLiSTFSI = poly(lithium 4-styrenesulfonyl-(trifluoromethylsulfonyl) imide); PEGM = poly(diethylene glycol monomethyl ether methacrylate)) with a hard nanofibril backbone and soft functional polymer side-chains is reported as an effective strategy to well balance the mechanical strength and ion conductivity of quasi-solid-state polymer electrolytes. The resulting single lithium-ion conducting quasi-solid-state polymer-brush electrolytes (SLIC-QSPBEs) integrate the features of the ultrathin membrane thickness (10 µm), the nanofibril backbone-strengthened porous nanonetwork (Young's modulus = 1.9 GPa), and the high-rate single lithium-ion conducting diblock copolymer brushes. As a result, the ultrathin yet robust SLIC-QSPBEs enable ultralong-term (over 3300 h) reversible and stable lithium plating/stripping in Li/Li symmetrical cell at a current density of 1 mA cm-2 for lithium anode. This work affords a promising strategy to develop advanced electrolytes for solid-state lithium-metal batteries.

Comparative effectiveness of activated dolomite phosphate rock and biochar for immobilizing cadmium and lead in soils.

Sandy soils in Florida are vulnerable to toxic metal pollution, and it is necessary to identify desirable amendments for the remediation of metal contaminated soils. Sorption and incubation experiments were conducted to compare the effectiveness of dolomite phosphate rock (DPR), humic acid activated dolomite phosphate rock (ADPR) and biochar (BC) in immobilizing Cd2+ and Pb2+ in two representative agricultural soils in south Florida (Alfisol-Riviera and Spodosol -Ankona series). The results showed that the soils had a low sorption capacity for metals with maximum sorption of 0.767-3.30 mg/g. Application of amendments increased the maximum sorption by 4.2-4.8 times for Pb2+ and 1.5-2.2 times for Cd2+ in Alfisol soil, and 7.1-7.9 times for Pb2+ and 1.7-3.1 times for Cd2+ in Spodosol soil. ADPR was the most effective amendment for increasing the soil's sorption capacity for Cd2+ and Pb2+. 0.01 M CaCl2 extractable metals in the contaminated soils were significantly decreased by all the amendments, especially ADPR, which reduced extractable Cd2+ and Pb2+by 87.2 and 76.0% in Alfisol and 91.3 and 76.3% in Spodosol soil as compared to control. The amounts of extractable Cd2+ and Pb2+ were negatively correlated with soil pH and available P, indicating that the change of soil characteristics by amendments was the dominant mechanism for enhanced immobilization of metals in the contaminated soils. These results indicate that ADPR has great potential for remediating toxic levels of Cd2+ and Pb2+ in contaminated soils.

A versatile sea anemone-inspired strategy toward 2D hybrid porous carbons from functional molecular brushes.

A generalized and facile strategy toward 2D hybrid porous carbons (2DHPCs) with various highly active functional species (e.g. Co, B, and P) is developed via 2D molecular brushes as biomimetic building blocks. The resulting 2DHPCs present superior electrochemical energy conversion and storage properties.

FeS/FeNC decorated N,S-co-doped porous carbon for enhanced ORR activity in alkaline media.

A novel strategy is developed to produce an FeS-FeNC-decorated hierarchical porous N,S-co-doped carbon (FeS-FeNC@NSC) electrocatalyst via introducing volatile FeCl3 into a porphyrin polymer framework followed by carbonization. The synergistic effect between the FeS nanoparticles and FeNC active sites in FeS-FeNC@NSC is beneficial for enhancing the ORR activity.

Release of Heavy Metals from Dolomite Phosphate Rock after Activation with Organic Agent.

As high-grade phosphate reserves begin to diminish worldwide, low-grade phosphate rock such as that containing dolomite [CaMg(CO)] needs to be explored as a potential fertilizer. Activation of dolomite phosphate rock with humic acid substantially increased P availability by chelating Ca and Mg. However, the release potential of heavy metals during the activation process should be evaluated. In this study, an orthogonal experiment was designed to investigate the effects of major activating factors on the release of Cd, Cr, Cu, Mn, Ni, Pb, and Zn in activated fertilizers using a batch-equilibrium technique. The release potential of heavy metals from activated fertilizers was further compared with single superphosphate fertilizers made from the same dolomite phosphate rock. The activation process increased water-soluble Cr, Ni, and Zn by 39.8 to 65.7, 26.5 to 35.6, and 6.9 to 14.6 times, respectively, as compared with the original dolomite phosphate rocks, but there was a decrease in water-soluble Cd, Mn, Ni, Pb, and Zn by 1.4 to 5.4, 5.4 to 8.6, 2.3 to 3.7, 0.7 to 2.8, and 2.6 to 5.0 times, respectively, as compared with single superphosphate fertilizers. The release of heavy metals was affected by activating factors including dolomite phosphate rock type, particle size, humic acid dosage, and moisture content. Similar results were obtained with Mehlich-3 extraction, but levels of Mehlich-3-extractable heavy metals were less in activated fertilizers than in the original dolomite phosphate rocks, except Cu. These results indicate that activated fertilizers contain less bioavailable heavy metals than single superphosphate fertilizers and, therefore, are more environmentally friendly for application in agriculture.