Highly pH-Responsive Sensor Based on a EuIII Metal-Organic Framework with Efficient Recognition of Arginine and Lysine in Living Cells.

A lanthanide-based three-dimensional metal-organic framework with excellent water, acid/base, and solvent stability, namely {[(CH3)2NH2]0.7[Eu2(BTDBA)1.5(lac)0.7(H2O)2]·2H2O·2DMF·2CH3CN}n (JXUST-29, H4BTDBA = 4',4‴-(benzo[c][1,2,5]thiadiazole-4,7-diyl)bis([1,1'-biphenyl]-3,5-dicarboxylic acid), Hlac = lactic acid), has been synthesized and characterized. Since the N atoms of the thiadiazole group will not coordinate with lanthanide ions, JXUST-29 has a free basic N-site accessible to small H+ ions, which allows it to be used as a promising pH fluorescence sensor. Interestingly, the luminescence signal was significantly enhanced, with an approximately 54-fold enhancement in the emission intensity when the pH value was increased from 2 to 5, which is the typical behavior of pH probes. In addition, JXUST-29 can also be used as a luminescence sensor to detect l-arginine (Arg) and l-lysine (Lys) in an aqueous solution through fluorescence enhancement and the blue-shift effect. The detection limits were 0.023 and 0.077 µM, respectively. In addition, JXUST-29-based devices were designed and developed to facilitate detection. Importantly, JXUST-29 is also capable of detecting and sensing Arg and Lys in living cells.

Near-Room-Temperature Synergetic Response of Magnetism, Dielectricity and Luminescence Based on (C5 NH13 Cl)2 MnBr4.

Multifunctional materials with working temperatures near room temperature are crucial for practical applications. Until now, it is still a great challenge to obtain such materials. In this paper, a complex of (C5 NH13 Cl)2 MnBr4 (1) with a structural phase transition near room temperature is reported. The phase transition induces switchable magnetic properties, dielectric anomalies and luminescent response over the same range of temperatures. It is the first time the synergetic effect of magnetism, dielectricity and luminescence near room temperature have been observed in the same molecular complex.

Synthesis and Structure of an Aqueous Stable Europium-Based Metal-Organic Framework with Ratiometric Fluorescence Sensing for Phosphate and Luminescence Quenching for Salicylaldehyde.

An aqueous stable europium-based metal-organic framework with properties of ratiometric fluorescence sensing, namely, {[(CH3)2NH2][Eu(TCPB)(H2O)2]·DMF}n (Eu-MOF; H4TCPB = 1,2,4,5-tetrakis(4-carboxyphenyl)-benzene), was synthesized under solvothermal conditions and structurally characterized. Crystal structure analysis shows that Eu-MOF is a three-dimensional porous crystal, in which the EuIII ion is an eight-coordinate square inverse prism with eight oxygen atoms. Fluorescence measurements show that Eu-MOF exhibits characteristic emission of the EuIII ion and ligand. Eu-MOF displays good selectivity and sensitivity as a ratiometric fluorescence sensor for phosphate anions with a low detection limit in Tris-HCl buffer solution. Furthermore, Eu-MOF also has a good ability to identify salicylaldehyde through fluorescence quenching with a detection limit of 0.095 ppm. Therefore, it is an excellent fluorescent sensing material for phosphate and organic salicylaldehyde.

Mechanochromic and Selective Vapochromic Solid-State Luminescence of a Dinuclear Cuprous Complex.

The unraveling of the stimuli-responsive mechanism is crucial to the design and precise synthesis of stimuli-responsive luminescent materials. We report herein the mechanochromic and selective vapochromic solid-state luminescence properties of a new bimetallic cuprous complex [{Cu(bpmtzH)}2(µ-dppm)2](ClO4)2 (1), and the corresponding response mechanisms are elucidated by investigating its two different solvated polymorphs 1·2CH2Cl2 (1-g) and 1·2CHCl3 (1-c). Green-emissive 1-g and cyan-emissive 1-c can be interconverted upon alternate exposure to CHCl3 and CH2Cl2 vapors, which is principally attributable to a combined alteration of both intermolecular NHbpmtzH···OClO3- hydrogen bonds and intramolecular "triazolyl/phenyl" π···π interactions induced by different solvents. Solid-state luminescence mechanochromism present in 1-g and 1-c is mainly ascribed to the grinding-induced breakage of the NHbpmtzH···OClO3- hydrogen bonds. It is suggested that intramolecular π···π-triazolyl/phenyl interactions are affected by different solvents but not by grinding. The results provide new insights into the design and precise synthesis of multi-stimuli-responsive luminescent materials by the comprehensive use of intermolecular hydrogen bonds and intramolecular π···π interactions.

Stable Europium(III) Metal-Organic Framework Demonstrating High Proton Conductivity and Fluorescence Detection of Tetracyclines.

A europium(III) metal-organic framework (MOF), namely, {[[(CH3)2NH2]3Eu2(DTTP-2OH)2(HCOO)(H2O)]·4H2O}n (Eu-MOF, H4DTTP-2OH = 2',5'-dihydroxy-[1,1':4',1″-terphenyl]-3,3″,5,5″-tetracarboxylic acid) has been assembled through solvothermal method. The Eu-MOF is a three-dimensional (3D) (4,4,8)-connected topological framework with binuclear Eu(III) clusters as secondary building units, in which a richly ordered hydrogen bonding network formed among the free H2O molecules, dimethylamine cations, and phenolic hydroxyl groups provides a potential pathway for proton conduction. The proton conductivity reaches the category of superionic conductors (σ > 10-4 S cm-1) at room temperature with a maximum conductivity of 1.91 × 10-3 S cm-1 at 60 °C and 98% RH. Moreover, it also can be used as a fluorescence sensor in aqueous solution with detection limits of 0.14 µM for tetracycline, 0.13 µM for oxytetracycline and 0.11 µM for doxycycline. These results pave new methods for constructing MOFs with high proton conductivity and responsive fluorescence.

Solvent- and pH-Stable Eu(III)-Based Metal-Organic Framework with Phosphate-Ratio Fluorescence Sensing and Significant Proton Conduction.

Lanthanide-based metal-organic frameworks show good potential for applications due to their unique structures and functional properties. A highly thermally and acid-base stable Eu-MOF was synthesized by a solvothermal method with the molecular formula {[(CH3)2NH2]2[Eu2(NDDP)2(H2O)2]·H2O}n (Eu-MOF, H4NDDP = 5,5'-(naphthalene-2,6-diyl)diisophthalic acid). Eu-MOF takes a three-dimensional (4,4,8)-connected topology. The water molecules involved in the coordination, free water molecules, and [(CH3)2NH2]+ cations in the pore can be used as proton carriers. The proton conductivity attains 1.25 × 10-4 S cm-1 at room temperature and 2.42 × 10-3 S cm-1 at 70 °C and 98% relative humidity. Combined with the dual-emission properties from the ligands and Eu(III) ions enables Eu-MOF to be used as a ratiometric fluorescent sensor for phosphate efficiently and rapidly, with a limit of detection of 0.12 µM in the Tris-HCl buffer solution. These results provide a new approach for the construction of MOFs with high proton conductivity and a ratiometric fluorescence response.

Highly Stable Rare Earth Metal-Organic Frameworks for Fluorescence Recognition of Folic Acid, Proton Conduction, and Magnetic Refrigeration.

Four new isostructural rare earth metal-organic frameworks (RE-MOFs) were synthesized and full characterized, namely, {[(CH)2NH2]3[RE2(BTDBA)2(HCOO)]·5H2O·2DMF}n (H4BTDBA = (4',4'''-(benzo[c][1,2,5]thiadiazole-4,7-diyl)bis([1,1'-biphenyl]-3,5-dicarboxylic acid); RE = Eu (JXUST-34), Gd (JXUST-35), Tb (JXUST-36), and Dy (JXUST-37)). The single-crystal structures analysis shows that JXUST-34-37 are chain-based three-dimensional structures. Importantly, JXUST-34 exhibits excellent water, organic solvents, and acid-base stability, which can be used as a fluorescence sensor for folic acid and Al3+ with detection limits of 0.02 mM and 0.05 µM, respectively. The presence of free [(CH)2NH2]+ cations in the channels can engage the proton carrier during proton conduction. JXUST-34-37 display good proton conductivity, and the conductivities vary with relative humidity and temperatures, among which JXUST-37 has the highest conductivity of 9.66 × 10-3 S·cm-1 at 60 °C and 98% RH. The magnetic studies show that the -ΔSm of JXUST-35 reaches 16.13 J kg-1 K-1 at 2 K and ΔH = 7 T. JXUST-34-37 show multifunctional properties of fluorescence sensing, high proton conductivity, and magnetic refrigeration, which provides a new clue for the development of fluorescent-responsive, magnetic-refrigerant, and proton-conductive RE-MOF materials.

Enhanced Heterogeneous Catalytic Activity of Peroxymonosulfate for Rhodamine B Degradation via a CoII-Based Metal-Organic Framework.

A stable metal-organic framework with the formula {[Co(BBZB)(IPA)]·H2O}n (JXUST-23, BBZB = 4,7-bis(1H-benzimidazole-1-yl)-2,1,3-benzothiadiazole and H2IPA = isophthalic acid) was constructed by incorporating Co2+ ions and two conjugated ligands under solvothermal conditions. JXUST-23 takes a dinuclear cluster-based layer structure with a porosity of 2.7%. In this work, JXUST-23 was used to activate peroxymonosulfate (PMS) to degrade rhodamine B (RhB), a difficult-to-degrade pollutant in water. Compared with pure PMS or JXUST-23, the JXUST-23/PMS system displays the best degradation ability of RhB in neutral solution. When the mass ratio of JXUST-23 to PMS was 2:3, 99.72% of RhB (50 ppm) was removed within 60 min, and the reaction rate was 0.1 min-1. Furthermore, free radical quenching experiments show that SO4•- was the main free radical during the process of RhB degradation. In addition, JXUST-23 exhibits good reusability for the degradation of the organic dye RhB, making it a potential candidate for environmental remediation.

Controllable Synthesis of TbIII Metal-Organic Frameworks with Reversible Luminescence Sensing for Benzaldehyde Vapor.

Two novel lanthanide metal-organic frameworks (MOFs) with the formulas [Tb(bidc)(Hbidc)(H2O)]n (JXUST-20) and {[Tb3(bidc)4(HCOO)(DMF)]·solvents}n (JXUST-21) were synthesized based on 2,1,3-benzothiadiazole-4,7-dicarboxylic acid (H2BTDC) under solvothermal conditions. Interestingly, benzimidazole-4,7-dicarboxylic acid (H2bidc) was formed in situ using H2BTDC as the starting material. The self-assembly process of the targeted MOFs with different topological structures can be controlled by the solvents and concentration of the reactants. Luminescence experiments show that JXUST-20 and JXUST-21 exhibit strong yellow-green emission. JXUST-20 and JXUST-21 can selectively sense benzaldehyde (BzH) via a luminescence quenching effect with detection limits of 15.3 and 1.44 ppm, respectively. In order to expand the practical application of MOF materials, mixed-matrix membranes (MMMs) have been constructed by mixing targeted MOFs and poly(methyl methacrylate) in a N,N-dimethylformamide (DMF) solution, which can also be used for BzH vapor sensing. Therefore, the first case of MMMs derived from TbIII MOFs has been developed for the reversible detection of BzH vapor, providing a simple and efficient platform for the future detection of volatile organic compounds.

A Pair of Multifunctional Cu(II)-Dy(III) Enantiomers with Zero-Field Single-Molecule Magnet Behaviors, Proton Conduction Properties and Magneto-Optical Faraday Effects.

Multifunctional materials with a coexistence of proton conduction properties, single-molecule magnet (SMM) behaviors and magneto-optical Faraday effects have rarely been reported. Herein, a new pair of Cu(II)-Dy(III) enantiomers, [DyCu2(RR/SS-H2L)2(H2O)4(NO3)2]·(NO3)·(H2O) (R-1 and S-1) (H4L = [RR/SS] -N,N'-bis [3-hydroxysalicylidene] -1,2-cyclohexanediamine), has been designed and prepared using homochiral Schiff-base ligands. R-1 and S-1 contain linear Cu(II)-Dy(III)-Cu(II) trinuclear units and possess 1D stacking channels within their supramolecular networks. R-1 and S-1 display chiral optical activity and strong magneto-optical Faraday effects. Moreover, R-1 shows a zero-field SMM behavior. In addition, R-1 demonstrates humidity- and temperature-dependent proton conductivity with optimal values of 1.34 × 10-4 S·cm-1 under 50 °C and 98% relative humidity (RH), which is related to a 1D extended H-bonded chain constructed by water molecules, nitrate and phenol groups of the RR-H2L ligand.

Stable Lanthanide Metal-Organic Frameworks with Ratiometric Fluorescence Sensing for Amino Acids and Tunable Proton Conduction and Magnetic Properties.

Four new isostructural lanthanide metal-organic frameworks (MOFs), namely {[Ln(DMTP-DC)1.5(H2O)3]·DMF}n [H2DMTP-DC = 2',5'-dimethoxytriphenyl-4,4″-dicarboxylic acid; LnIII = EuIII (1), GdIII (2), TbIII (3), and DyIII (4)], have been synthesized and characterized. Single-crystal structure analysis reveals that 1-4 are three-dimensional Ln-MOFs with rich H-bonding of coordinated H2O molecules in the network channels. The X-ray diffraction patterns indicate that Ln-MOF 1 displays good stabilities in organic solvents and aqueous solutions with distinct pH values. Both 1 and 3 show characteristic emission of LnIII ions. Ln-MOF 1 can be used as a ratiometric fluorescence sensor for arginine and lysine in aqueous solution, and the detection limits are 24.38 µM for arginine and 9.31 µM for lysine. All 1-4 show proton conductivity related to relative humidity (RH) and temperature, and the maximum conductivity values of 1-4 at 55 °C and 100% RH are 9.94 × 10-5, 1.62 × 10-4, 1.71 × 10-4, and 2.67 × 10-4 S·cm-1, respectively. The value of σ increases with the decrease in ionic radius, indicating that the radius of the LnIII ions can regulate the proton conductivity of these MOFs. Additionally, 2 exhibits a significant magnetocaloric effect (MCE) with a magnetic entropy change (-ΔSm) of 18.86 J kg-1 K-1 for ΔH = 7 T at 2 K, and 4 shows weak field-induced slow relaxation of magnetization. The coexistence of good fluorescence sensing capability, attractive proton conductivity, and relatively large MCE in Ln-MOFs is rare, and thus, 1-4 are potentially multifunctional MOF materials.

A pH-Stable TbIII-Based Metal-Organic Framework as a Turn-On and Blue-Shift Fluorescence Sensor toward Benzaldehyde and Salicylaldehyde in Aqueous Solution.

A new polydentate tetracarboxylic acid with a benzothiadiazole unit (4',4'''-(benzo[c][1,2,5]thiadiazole-4,7-diyl)bis([1,1'-biphenyl]-3,5-dicarboxylic acid), H4BTDBA) has been used to prepare a pH-stable three-dimensional TbIII-based metal-organic framework (MOF) with the formula {[(CH3)2NH2]0.7[Tb2(BTDBA)1.5(lac)0.7(H2O)2]·solvents}n (Hlac = lactic acid, JXUST-19). JXUST-19 exhibits a new (4,4,12)-connected topology based on tetranuclear [Tb4] clusters. JXUST-19 can remain stable when soaked in water for at least 1 week and in aqueous solutions with various pH values (2-12) for 24 h. Fluorescence study indicates JXUST-19 can be employed as a rare turn-on and blue-shift MOF sensor toward benzaldehyde (BZ) and salicylaldehyde (SA). To date, JXUST-19 represents the first TbIII-based turn-on MOF sensor toward salicylaldehyde in aqueous solution, and the fluorescence enhancement and naked-eye detection of BZ have been rarely reported. In addition, JXUST-19 based fluorescent test papers, light-emitting diode lamp beads, and portable composite films were developed to realize naked-eye detection of BZ and SA, which has great potential in practical applications.

A Benzothiadiazole-Based Eu3+ Metal-Organic Framework as the Turn-On Luminescent Sensor toward Al3+ and Ga3+ with Potential Bioimaging Application.

The design and preparation of novel multifunctional lanthanide metal-organic frameworks (Ln-MOFs) have been arisen widespread attention. In particular, Ln-MOFs have shown great luminescence potential in chemical sensing. Herein, a new benzothiadiazole-based Eu-MOF {[(CH3)2NH2][Eu(BTDB)2]·2H2O}n (JXUST-11) was obtained based on 4,4'-(benzo[c][1,2,5]thiadiazole-4,7-diyl)dibenzoic acid (H2BTDB), which exhibits a chain-based three-dimensional framework. Moreover, JXUST-11 is considered as a photoluminescent sensor to identify Al3+ and Ga3+ ions by fluorescence enhancement with the detection limits of 2.9 and 10.2 ppm, severally. Importantly, Al3+ and Ga3+ can be discerned with the naked eye by color change under a natural lamp. In addition, a portable MOF film based on JXUST-11 was developed for Al3+ and Ga3+ detection. This is the first Ln-MOF that can be employed as a naked-eye fluorescent probe to identify Ga3+. Interestingly, JXUST-11 is also capable of detecting Al3+ and Ga3+ in living cells.

A Mechanochromic and Vapochromic Luminescent Cuprous Complex Based on a Switchable Intramolecular π···π Interaction.

An in-depth study on a stimuli-responsive tetranuclear cuprous luminescent complex is reported and gives new insights into the origin and possible use of the observed stimuli-responsive luminescence. Its crystalline polymorphs with two different shapes are obtained by using different crystallization solvents and show distinct emissions, with one being blue emissive and the other being yellow emissive. Upon grinding, only the blue-emitting polymorph has a marked change in the emission color from blue to yellow, and its ground sample exhibits a yellow emission similar to that of the yellow-emitting polymorph. Interestingly, the yellow-emitting polymorph after exposure to acetone vapor can emit a blue emission and display luminescence mechanochromism similar to that of the blue-emitting polymorph. Single-crystal structural analyses of the two different polymorphs reveal the relationship between the mechanochromic luminescence and the geometrical configuration of the {Cu(µ-dppm)2Cu} unit and intramolecular "pyridyl/phenyl" π···π interactions, supported as well by their PXRD, FT-IR, TGA, and PL studies in various states and by TD-DFT analyses. The results demonstrate the different roles of switchable intramolecular π···π interactions and the geometrical configuration of the {Cu(µ-dppm)2Cu} unit in this stimuli-responsive luminescence and potential applications of such stimuli-responsive luminescence in optical sensing and anticounterfeiting encryption technologies and deepen the understanding of such stimuli-responsive luminescence originating from switchable intramolecular π···π interactions. In addition, it is clearly suggested that the rational utilization of switchable intramolecular π···π interactions is a feasible route for developing stimuli-responsive intelligent luminescent materials and devices.

Thermo-, Mechano-, and Vapochromic Dinuclear Cuprous-Emissive Complexes with a Switchable CH3CN-Cu Bond.

A thermo-, mechano-, and vapochromic bimetallic cuprous-emissive complex has been reported, and the origin and application of its tri-stimuli-responsive luminescence have been explored. As revealed by single-crystal structure analysis, thermo- and vapochromic luminescence adjusted by heating at 60 °C and CH3CN vapor fuming, accompanied by a crystalline-to-crystalline transition, is due to the breaking and rebuilding of the CH3CN-Cu bond, as supported by 1H nuclear magnetic resonance (NMR), Fourier-transform infrared (FT-IR) spectroscopy, powder X-ray diffraction (PXRD), thermogravimetry (TG), and time-dependent density functional theory (TD-DFT) analyses of the CH3CN-coordinated species [Cu2(µ-dppa)2(µ-η1(N)η2(N,N)-fptz)(CH3CN)](ClO4)·H2O (1) and its CH3CN-removed derivative [Cu2(µ-dppa)2(µ-η1(N)η2(N,N)-fptz)](ClO4)·H2O (2). Luminescence mechanochromism, mixed with a crystalline-to-amorphous transition where the initial crystalline is different for 1 and 2, is mainly assigned as the destruction of the CH3CN-Cu bonding and/or the O···HNdppa and OH···Ntriazolyl hydrogen bonds. It is also suggested that a rational use of switchable coordination such as weak metal-solvent bonding is a feasible approach to develop multi-stimuli-responsive luminescent materials and devices.

Multifunctional Dinuclear Dy-Based Coordination Complex Showing Visible Photoluminescence, Single-Molecule Magnet Behavior, and Proton Conduction.

A new Dy-based complex, [Dy2(phen)4(PAA)4](ClO4)2 (1), was obtained by using 4-hydroxyphenyl acetate (HPAA) as a ligand and 1,10-phenanthroline as an auxiliary ligand. Complex 1 shows a dinuclear structure and a 2D supramolecular layer constructed by π-π stacking interactions. The complex displays a characteristic Dy(III) emission. Moreover, magnetic susceptibility measurements revealed that 1 exhibits a single-molecule magnet (SMM) behavior. In addition, it also shows a proton conductivity of 1.08 × 10-5 S cm-1 under 353 K and 100% relative humidity conditions, which is mainly assigned to H-bonded networks formed by the undeprotonated and uncoordinated phenolic groups of HPAA ligands and guest water molecules. Remarkably, 1 is the first example of a dinuclear complex showing photoluminescence, SMM behavior, and proton conduction.

Fabrication and DFT Calculation of Amine-Functionalized Metal-Organic Framework as a Turn-On Fluorescence Sensor for Fe3+ and Al3+ Ions.

Due to their important role in biological systems, it is urgent to develop a material that can rapidly and sensitively detect the concentration of Fe3+ and Al3+ ions. In this work, a brand-new CdII-based metal-organic framework [Cd(BTBD)2(AIC)]n (JXUST-18, BTBD = 4,7-bis(1H-1,2,4-triazol-1-yl)-2,1,3-benzothiadiazole and H2AIC = 5-aminoisophthalic acid) with a 4-connected sql topology was designed and synthesized. The symmetrical CdII centers are linked by AIC2- ligands with µ3-η1:η1:η1:η1 coordination mode to form a [Cd2(COO)2] secondary building unit (SBU). The contiguous SBUs are further connected by BTBD ligands to form a two-dimensional (2D) layer structure. JXUST-18 can remain stable in aqueous solutions with pH values of 3-12 or in boiling water. Luminescent experiments suggest that JXUST-18 displays more than eightfold fluorescence enhancement in the presence of Fe3+ and Al3+ ions, and the detection limits for Fe3+ and Al3+ ions are 0.196 and 0.184 µM, respectively. Furthermore, the change in luminescence color is uncomplicatedly distinguishable with the naked eye under ultraviolet light at 365 nm. In addition, a series of devices based on JXUST-18 including fluorescence test strips, lamp beads, and composite films were developed to detect metal ions via visual changes in luminescence color. Significantly, JXUST-18 is a rare MOF-based turn-on fluorescence sensor for the detection of Fe3+ ions. The theoretical calculation suggests that the complexation of Fe3+/Al3+ ions and the -NH2 group contributes to fluorescence enhancement.

Family of Chiral ZnII-LnIII (Ln = Dy and Tb) Heterometallic Complexes Derived from the Amine-Phenol Ligand Showing Multifunctional Properties.

A family of chiral 3d-4f heterometallic complexes, namely, [Zn2Ln(R,R-L)2(H2O)4](ClO4)3) [Ln = Dy (1), Tb (3)], [Zn2Ln(S,S-L)2(H2O)4](ClO4)3 [Ln = Dy (2), Tb (4)], [Zn2Ln2(R,R-L)2(CO3)2(NO3)2]·2CH3OH [Ln = Dy (5), Tb (7)], and [Zn2Ln2(S,S-L)2(CO3)2(NO3)2]·2CH3OH [Ln = Dy (6), Tb (8)] {H2L = cyclohexane-1,2-diylbis(azanediyl)bis(methylene)bis(2-methoxyphenol)}, has been synthesized and characterized. Crystal structure analysis reveals that complexes 1-4 are isostructural trinuclear clusters crystallized in chiral space group C2221, and 5-8 are isostructural tetranuclear clusters crystallized in chiral space group P1. Interestingly, the adjacent [ZnLn] units within the tetranuclear cluster in 5-8 are bridged by two carbonate anions via in situ incorporation of CO2 from air. Magnetic measurements indicate that complexes 1 and 3 exhibit field-induced single-molecule magnet behavior with energy barriers (Ueff) of 22.46 and 38.70 K (or 41.87 K), respectively. Complex 5 displays typical SMM behavior with Ueff = 19.61 K under zero dc field, while for complex 7, no obvious out-of-phase signals are observed even under 2 kOe dc field, the absence of SMM behavior. The solid-state luminescence studies reveal that all complexes display the characteristic fluorescence emission of lanthanide ions. Furthermore, the Kurtz-Perry measurements reveal these complexes are potential nonlinear optical materials.

Reversible Mechanochromic Luminescence of Tetranuclear Cuprous Complexes.

Mechanochromic luminescence materials have attracted rapidly growing interest. Nevertheless, the designed synthesis of such materials remains a challenge, and there have been few examples based on weak intramolecular interactions. Herein, we report a new approach for preparing mechanochromic luminescence materials of Cu(I) complexes, i.e., constructing a photoluminescence system that bears a large coplanar multinuclear Cu(I) unit showing weak intramolecular π···π interactions with the planar rings of the coordinated ligands in the molecule. Using it, a series of novel mechanochromic luminescent tetranuclear Cu(I) complexes have been successfully designed and synthesized. As revealed by single-crystal X-ray crystallography, these Cu(I) complexes share an identical {Cu4[µ3-η2(N,N),η1(N),η1(N)-pyridyltetrazole]2}2+ planar fragment whose coplanar pyridyl rings exhibit weak intramolecular π···π interactions with the phenyl rings of the coordinated phosphine ligands in the molecule. All of these Cu(I) complexes exhibit reversible mechanochromic luminescence, which can be attributed to the change in the rigidity of the molecular structure resulting from the disruption and restoration of intramolecular π···π interactions between the pyridyl and phenyl rings triggered by grinding and CH2Cl2 vapor, as supported by powder X-ray diffraction and Fourier transform infrared spectrometry. In addition, the results might provide a new route for developing mechanochromic luminescence materials of Cu(I) complexes for intelligent responsive luminescent devices.

Turn-On Luminescent Sensor toward Fe3+, Cr3+, and Al3+ Based on a Co(II) Metal-Organic Framework with Open Functional Sites.

A novel Co-based metal-organic framework (MOF) with the formula of {[Co3(BIBT)3(BTC)2(H2O)2]·solvents}n (JXUST-2, where JXUST denotes Jiangxi University of Science and Technology, BIBT = 4,7-bi(1H-imidazol-1-yl)benzo-[2,1,3]thiadiazole, and H3BTC = 1,3,5-benzenetricarboxylic acid) has been solvothermally prepared, which takes 3D structure with a rare 3,4,6-c topology and contains intramolecular hydrogen bonds. Interestingly, the sensing investigations suggest that JXUST-2 could be considered as a multifunctional fluorescence sensor toward Fe3+, Cr3+, and Al3+ via a turn-on effect with good reusability and detection limits of 0.13, 0.10, and 0.10 µM, respectively. The turn-on effect of JXUST-2 could be ascribed to an absorbance caused enhancement (ACE) mechanism. Notably, JXUST-2 is the first turn-on MOF fluorescent sensor for Fe3+, Cr3+, and Al3+ simultaneously.