RESUMO
The amount of silicon in anode materials for Li-ion batteries is still limited by the huge volume changes during charge-discharge cycles. Such changes lead to the loss of electrical contacts, as well as mechanical and surface electrolyte interphase (SEI) instabilities, strongly reducing the cycle life. Core-shell structures have attracted a vast research interest due to the possibility of modifying some properties with a judicious choice of the shell. It is, for example, possible to improve the electronic conductivity and ionic diffusion, or buffer volume variations. This review gives a comprehensive overview of the recent developments and the different strategies used for the design, synthesis and electrochemical performance of silicon-based core-shells. It is based on a selection of the main types of silicon coatings reported in the literature, including carbon, inorganic, organic and double-layer coatings, Finally, a summary of the advantages and drawbacks of these different types of core-shells as anode materials for Li-ion batteries and some insightful suggestions in regards to their use are provided.
RESUMO
Understanding and controlling confined nanospace to accommodate substrates and promote high ion conduction are essential to various fields. Layered double hydroxides (LDHs) have emerged as promising candidates for anion exchangers using the interlayer nanospace in their crystal structures. Miyata reported in 1983 that the affinity of anions for intercalation with most major Mg-Al LDHs increased in the following order: NO3- < Br- < F- < SO42- < HPO32-. Attempts to alter the affinity with different metal cations (M2+ and M3+) have been unsuccessful. Analyses of the crystalline structures of LDHs, positively charged host layers, interlayer anions, and interlayer water molecules indicate that they inevitably interact through hydrogen bonding. In other words, the affinity of LDHs for anions is controlled by tuning the hydrogen bonding. In this study, we prepared fluorine-substituted LDHs (F-LDHs) with different Mg/Al ratios by partially replacing the OH structural groups, which originated from the host layer, with fluorine atoms; the resulting change in affinity was investigated. The distribution coefficient, which is a useful indicator of the affinity of an LDH for a particular anion, was examined. The results showed that only F-LDHs with Mg/Al ratios of 3.5 exhibited high affinity, especially for NO3- ions, and the affinity increased in the following order: HPO42- < SO42- < F- < Br- < NO3-. The separation factors of these specific F-LDHs with respect to both NO3-/F- and NO3-/SO42- were higher than that of LDHs with other compositions by 1 order of magnitude. Raman spectroscopy above 3000 cm-1 revealed that the fluorine substitution of LDHs significantly changed the hydrogen bonding nature in the interlayer space. Highly electronegative fluorine atoms significantly decrease the extent of hydrogen bonding interactions between OH structural groups and both interlayer water molecules and anions, wherein steric effects are induced by the shrunken interlayer space, and van der Waals forces are revealed to be the predominant interaction with anions. Therefore, the highest affinity was observed for NO3- ions in F-LDHs.
RESUMO
An original, halide-free non-hydrolytic sol-gel route to mesoporous anatase TiO2 with hierarchical porosity and high specific surface area is reported. This route is based on the reaction at 200 °C of titanium(IV) isopropoxide with acetic anhydride, in the absence of a catalyst or solvent. NMR spectroscopic studies indicate that this method provides an efficient, truly non-hydrolytic and aprotic route to TiO2 . Formation of the oxide involves successive acetoxylation and condensation reactions, both with ester elimination. The resulting TiO2 materials were nanocrystalline, even before calcination. Small (about 10â nm) anatase nanocrystals spontaneously aggregated to form mesoporous micron-sized particles with high specific surface area (240â m2 g-1 before calcination). Evaluation of the lithium storage performances shows a high reversible specific capacity, particularly for the non-calcined sample with the highest specific surface area favouring pseudo-capacitive storage: 253â mAh g-1 at 0.1â C and 218â mAh g-1 at 1â C (C=336â mA g-1 ). This sample also shows good cyclability (92 % retention after 200â cycles at 336â mA g-1 ) with a high coulombic efficiency (99.8 %). Synthesis in the presence of a solvent (toluene or squalane) offers the possibility to tune the morphology and texture of the TiO2 nanomaterials.
RESUMO
Mesoporous TiO2 -carbon nanocomposites were synthesized using an original non-hydrolytic sol-gel (NHSG) route, based on the reaction of simple ethers (diisopropyl ether or tetrahydrofuran) with titanium tetrachloride. In this atom-economic, solvent-free process, the ether acts not only as an oxygen donor but also as the sole carbon source. Increasing the reaction temperature to 180 °C leads to the decomposition of the alkyl chloride by-product and to the formation of hydrocarbon polymers, which are converted to carbon by pyrolysis under argon. The carbon-TiO2 nanocomposites and their TiO2 counterparts (obtained by calcination) were characterized by nitrogen physisorption, XRD, solid state 13 Câ NMR and Raman spectroscopies, SEM, and TEM. The nanocomposites are mesoporous with surface areas of up to 75â m2 g-1 and pore sizes around 10â nm. They are composed of aggregated anatase nanocrystals coated by an amorphous carbon film. Playing on the nature of the ether and on the reaction temperature allows control over the carbon content in the nanocomposites. The nature of the ether also influences the size of the TiO2 crystallites and the morphology of the nanocomposite. To further characterize the carbon coating, the behavior of the carbon-TiO2 nanocomposites and bare TiO2 samples toward lithium insertion-deinsertion was investigated in half-cells. This simple NHSG approach should provide a general method for the synthesis of a wide range of carbon-metal oxide nanocomposites.
RESUMO
The upbuilding of dirhodium tetracarboxylate paddlewheels into porous architectures is still challenging because of the inertness of equatorial carboxylates for ligand-exchange reaction. Here we demonstrate the synthesis of a new family of metal-organic cuboctahedra by connecting dirhodium units through 1,3-benzenedicarboxylate and assembling cuboctahedra as porous solids. Carbon monoxide and nitric oxide were strongly trapped in the internal cavity thanks to the strong affinity of unsaturated axial coordination sites of dirhodium centers.
RESUMO
Mixed-metal inorganic fluoride, Co0.60Fe0.40F3, solid solutions are obtained through topochemical reactions of Co2FeCl(OH)6·2H2O LDH with molecular fluorine, F2, at temperatures as low as 100 °C. This solid solution possesses interesting F(â¢)-releasing ability, and its efficiency as a solid-state fluorinating agent is demonstrated on a commercial polyethylene film. (19)F solid state NMR and contact angle measurements underline the efficient fluorination of this polymer.
Assuntos
Cobalto/química , Flúor/química , Halogenação , Hidróxidos/química , Ferro/química , Modelos Moleculares , Conformação MolecularRESUMO
Li(Ni0.80Co0.15Al0.05)O2 is a lithium-ion battery cathode, commercially available for more than twenty years, which is associated with high energy capacity and high energy density, with moderate power. Atomic layer fluorination (ALF) of Li(Ni0.80Co0.15Al0.05)O2 with XeF2 is performed to improve its cyclability. The ALF method aims at forming an efficient protecting fluorinated layer at the surface of the material, with a low fluorine content. Surface fluorinated Li(Ni0.80Co0.15Al0.05)O2 is characterized by X-ray diffraction, electron microscopy, 19F nuclear magnetic resonance, X-ray photoelectron spectroscopy, and galvanostatic measurements, and a fluorine content as low as 1.4 wt% is found. The presence of fluorine atoms improves the electrochemical performances of Li(Ni0.80Co0.15Al0.05)O2: cyclability, polarization and rate capability are improved. Operando infrared spectroscopy and post-mortem gas chromatography provide some insights into the origins of these improvements.
RESUMO
The spatial organization of porous coordination polymer (PCP) crystals into higher-order structures is critical for their integration into separation systems, heterogeneous catalysts, ion/electron transport and photonic devices. Here, we demonstrate a rapid method to spatially control the nucleation site, leading to the formation of mesoscopic architecture made of PCPs, in both two and three dimensions. Inspired by geological processes, this method relies on the morphological replacement of a shaped sacrificial metal oxide used both as a metal source and as an 'architecture-directing agent' by an analogous PCP architecture. Spatiotemporal harmonization of the metal oxide dissolution and the PCP crystallization allowed the preservation of very fine mineral morphological details of periodic alumina inverse opal structures. The replication of randomly structured alumina aerogels resulted in a PCP architecture with hierarchical porosity in which the hydrophobic micropores of the PCP and the mesopores/macropores inherited from the parent aerogels synergistically enhanced the material's selectivity and mass transfer for water/ethanol separation.
RESUMO
The properties of hybrid Sn-based artificial solid electrolyte interphase (SEI) layers in protecting Li-metal electrodes toward surface instabilities were investigated via a combined experimental and theoretical approach. The performance of coating layers can be coherently explained based on the nature of the coating species. Notably, when starting from a chloride precursor, the hybrid coating layer is formed by an intimate mixture of Li7Sn2 and LiCl: the first ensures a high bulk ionic conductivity, while the second forms an external layer allowing a fast surface diffusion of Li+ to avoid dendrite growth, a low surface tension to guarantee the thermodynamic stability of the protective layer, and a negative underneath plating energy (UPE) to promote lithium plating at the interface between the Li metal and the coating layer. The synergy between the two components and, in particular, the crucial role of LiCl in the promotion of such an underneath plating mechanism are shown to be the key properties to improve the performance of artificial SEI layers.
RESUMO
The comparison of different electrolytes showed that both salt concentration and anion are key parameters for controlling the performance of K-metal batteries. Among the different tested electrolytes, 5 M KTFSI in DME exhibits the best stability at high potential and good performance in K|Prussian blue cells.
RESUMO
Syntheses, X-ray structural characterization, optical properties, and electronic structures of 1D metal(III) iodide hybrids, namely, alpha-((CH(3))(2)S(CH(2))(2)NH(3))BiI(5) (1a), beta-((CH(3))(2)S(CH(2))(2)NH(3))BiI(5) (1b), ((CH(3))(2)S(CH(2))(2)NH(3))SbI(5) (2), and (HO(2)C(C(6)H(4))CH(2)NH(3))BiI(4) (3), are reported. According to the results of single-crystal X-ray diffraction analyses, the 1D inorganic chains are constructed by corner-shared M(III)I(6) octahedra in 1a, 1b, and 2 and by edge-shared ones in 3. In polymorphs 1a, 1b, and 2, the polymeric BiI(5)(2-) anionic chains are charge-balanced by the dimethyl(2-ethylammonium)sulfonium (dmes) dications. Complex 1a crystallizes in the polar space group of P2(1)cn. A spectacular umbrella reversal of half sulfonium parts together with the conformational change of half polymeric anions in the crystal structure of 1a occurs at moderate temperature (73 degrees C), leading to the beta-phase 1b, through a reversible single-crystal-to-single-crystal process. Complex 1b, as well as the isotype structure of 2, crystallize in the nonpolar acentric space group of P2(1)2(1)2(1). Because of their acentric structural characteristic, second harmonic generation (SHG) optical properties are observed in the polycrystalline powder samples of 1a, 1b, and 2. It is notable that the SHG signal of 1a is much stronger than that of 1b and 2 owing to the polarity of 1a. Remarkably, the peculiar dissymmetrical dication of dmes is able to modify the bonding features of the inorganic frameworks through shortening I...I distances between adjacent chains (d(I...I) < 4A). The structure of 3, which crystallizes in the triclinic space group P1, features a polymeric anionic chain constructed from edge-shared BiI(6) octahedra. The charge is balanced by the pairs of trans-4-(ammoniummethyl)-cyclohexane-carboxylic acid, which are linked together via the H bonding between the carboxylic groups to form a pseudodication. The results of DFT calculations based on the structures of 1a and 3 indicate that the narrower band gap in 1 appears to be associated on the one hand with a sigma* I-p/Bi-s interaction that moves the Fermi level to higher energy and on the other hand with the interchain I...I contacts.
RESUMO
As silicon-carbon electrodes with low silicon ratio are the negative electrode foreseen by battery manufacturers for the next generation of Li-ion batteries, a great effort has to be made to improve their efficiency and decrease their cost. Pitch-based carbon/nano-silicon composites are proposed as a high performance and realistic electrode material of Li-ion battery anodes. Composites are prepared in a simple way by the pyrolysis under argon atmosphere of silicon nanoparticles, obtained by a laser pyrolysis technique, and a low cost carbon source: petroleum pitch. The effect of the size and the carbon coating of the silicon nanoparticles on the electrochemical performance in Li-ion batteries is highlighted, proving that the carbon coating enhances cycling stability. Helped by a homogeneous dispersion of silicon nanoparticles into the amorphous carbon matrix, a high coulombic efficiency (especially in the first cycle) and a high stability over cycling is observed (over 1100 mA h g-1 after 100 cycles at relatively high current density 716 mA g-1 for Si based electrodes), which are superior to pitch-based carbon/silicon composites found in literature. This simple synthesis method may be extrapolated to other electrode active materials.
RESUMO
A new strategy for the synthesis of mesoporous TiO2 @C nanocomposites through the direct mineralization of seaweed-derived alginic acid cryogel by TiCl4 through a solid/vapor reaction pathway is presented. In this synthesis, alginic acid cryogel can have multiple roles; i)â mesoporous template, ii)â carbon source, and iii)â oxygen source for the TiO2 precursor, TiCl4 . The resulting TiO2 @alginic acid composite was transformed either into pure mesoporous TiO2 by calcination or into mesoporous TiO2 @C nanocomposites by pyrolysis. By comparing with a nonporous TiO2 @C composite, the importance of the mesopores on the performance of electrodes for lithium-ion batteries based on mesoporous TiO2 @C composite was clearly evidenced. In addition, the carbon matrix in the mesoporous TiO2 @C nanocomposite also showed electrochemical activity versus lithium ions, providing twice the capacity of pure mesoporous TiO2 or alginic acid-derived mesoporous carbon (A600). Given the simplicity and environmental friendliness of the process, the mesoporous TiO2 @C nanocomposite could satisfy the main prerequisites of green and sustainable chemistry while showing improved electrochemical performance as a negative electrode for lithium-ion batteries.
RESUMO
We report here a simple process for the synthesis of Li4Ti5O12(LTO)/carbon nanocomposites by a one-pot method using an alginic acid aquagel as a template and carbon source, and lithium acetate and TiO2 nanoparticles as precursors to the LTO phase. The carbon content can be tuned by adjusting the relative amount of alginic acid. The obtained materials consist of nanosized primary particles of LTO (30 nm) forming micron-sized aggregates covered by well-dispersed carbon (from 3 to 19 wt%). The homogeneous dispersion of carbon over the particles improves the electrochemical performance of LTO electrodes such as rate capability (>95 mA h g-1 at 40C) and cycling performance (>98% of retention after 500 cycles at 5C), even with only 3% of carbon black additive in the electrode formulation. With a simple and easily up-scalable synthesis, the LTO/carbon nanocomposites of this study are promising candidates as anode materials for practical application in lithium-ion batteries.
RESUMO
Nanostructured TiO2 and TiO2@C nanocomposites were prepared directly from urea-impregnated cellulose by a simple reaction/diffusion process and evaluated as negative electrode materials for Li and Na batteries. By direct treatment with TiCl4 under anhydrous conditions, the urea impregnation of cellulose impacts both the TiO2 morphology and the carbon left by cellulose after pyrolysis. Hierarchical TiO2 structures with a flower-like morphology grown from-and-at the surface of the cellulose fibers are obtained without any directing agent. The resulting TiO2/cellulose composite is then transformed either into pure TiO2 flowers by calcination in air at 600 °C, or into TiO2@C nanocomposites by pyrolysis under Ar at 600 °C. Electrochemical studies demonstrate that both samples can (de)insert lithium and sodium ions and are promising electrode materials.
Assuntos
Carbono/química , Celulose/química , Fontes de Energia Elétrica , Lítio/química , Sódio/química , Titânio/química , Ureia/química , Técnicas de Química Sintética , Eletroquímica , Eletrodos , Nanocompostos/química , NanotecnologiaRESUMO
Nanostructured TiO2 and TiO2@C nanocomposites were prepared by an original process combining biotemplating and mineralization of aerogels of nanofibrillated cellulose (NFC). A direct one step treatment of NFC with TiCl4 in strictly anhydrous conditions allows TiO2 formation at the outermost part of the nanofibrils while preserving their shape and size. Such TiO2@cellulose composites can be transformed into TiO2 nanotubes (TiO2-NT) by calcination in air at 600 and 900 °C, or into TiO2@C nanocomposites by pyrolysis in argon at 600 and 900 °C. Detailed characterization of these materials is reported here, along with an assessment of their performance as negative electrode materials for Li-ion batteries.
RESUMO
Flexible porous coordination polymers change their structure in response to molecular incorporation but recover their original configuration after the guest has been removed. We demonstrated that the crystal downsizing of twofold interpenetrated frameworks of [Cu(2)(dicarboxylate)(2)(amine)](n) regulates the structural flexibility and induces a shape-memory effect in the coordination frameworks. In addition to the two structures that contribute to the sorption process (that is, a nonporous closed phase and a guest-included open phase), we isolated an unusual, metastable open dried phase when downsizing the crystals to the mesoscale, and the closed phase was recovered by thermal treatment. Crystal downsizing suppressed the structural mobility and stabilized the open dried phase. The successful isolation of two interconvertible empty phases, the closed phase and the open dried phase, provided switchable sorption properties with or without gate-opening behavior.
RESUMO
Hybridized porous coordination polymers (PCPs) are synthesized through epitaxial growth or ligand replacement. Whereas epitaxial growth on the core crystal leads to a sandwich type PCP, ligand replacement near the surface of core crystal results in a core-shell type PCP.
Assuntos
Complexos de Coordenação/química , Cristalização/métodos , Polímeros/química , Zinco/química , Ligantes , Modelos Moleculares , PorosidadeRESUMO
Pb(n)I(4n+2)((2n+2)-) (n = 3, 5) ribbons, which can be regarded as dimensional reductions of 2D perovskite layers, are stabilized by diprotonated cystamine cations in (NH(3)(CH(2))(2)SS(CH(2))(2)NH(3))(4)Pb(3)I(14),I(2) (1) and (NH(3)(CH(2))(2)SS(CH(2))(2)NH(3))(6)Pb(5)I(22).4H(2)O (2). Both 1 and 2 have interesting structural characteristics; it is unprecedented that the ribbons are linked via I(2) molecules incorporated in the lattice of 1, while tetrameric water clusters are trapped in the structure of 2. 2 undergoes a (reversible) water desorption process at 310 K leading to (NH(3)(CH(2))(2)SS(CH(2))(2)NH(3))(6)Pb(5)I(22).2H(2)O (3). The electrical behavior of 2 and 3 has been investigated in the ranges 293-310 K and 310-358 K respectively. Above 310 K, the electronic contribution remains constant while the ionic transference number tends towards unity showing almost pure ionic transport at 360 K (6 x 10(-7) S cm(-1) at 330 K) originating probably from the migration of protons through the hydrogen bonds connecting the water molecules to the cystamine counter cations.
RESUMO
The alpha1-(Br-(CH(2))(2)-NH(3))(2)PbI(4) hybrid perovskite undergoes a solid-state transformation, that is, the reaction between the organic cations and the perovskite layers to give the new hybrid perovskite (Br-(CH(2))(2)-NH(3))(2-x)(I-(CH(2))(2)-NH(3))(x)PbBr(x)I(4-x), based on mixed halide inorganic layers. This transformation has been followed by a conventional powder X-ray diffraction system equipped with a super speed detector, and both solid-state (13)C NMR and ESI/MS measurements have been adopted in the estimation of the rate of halide substitution. The first reaction step leads to the special composition of x approximately 1 (A phase), while the complete substitution is not achieved even at elevated temperature (x(max) approximately 1.85 (B phase)). This unprecedented solid-state reaction between organic and inorganic components of a hybrid perovskite can be considered as a completely new strategy to achieve interesting hybrid perovskites.