Cascaded compression of size distribution of nanopores in monolayer graphene.

Monolayer graphene with nanometre-scale pores, atomically thin thickness and remarkable mechanical properties provides wide-ranging opportunities for applications in ion and molecular separations1, energy storage2 and electronics3. Because the performance of these applications relies heavily on the size of the nanopores, it is desirable to design and engineer with precision a suitable nanopore size with narrow size distributions. However, conventional top-down processes often yield log-normal distributions with long tails, particularly at the sub-nanometre scale4. Moreover, the size distribution and density of the nanopores are often intrinsically intercorrelated, leading to a trade-off between the two that substantially limits their applications5-9. Here we report a cascaded compression approach to narrowing the size distribution of nanopores with left skewness and ultrasmall tail deviation, while keeping the density of nanopores increasing at each compression cycle. The formation of nanopores is split into many small steps, in each of which the size distribution of all the existing nanopores is compressed by a combination of shrinkage and expansion and, at the same time as expansion, a new batch of nanopores is created, leading to increased nanopore density by each cycle. As a result, high-density nanopores in monolayer graphene with a left-skewed, short-tail size distribution are obtained that show ultrafast and ångström-size-tunable selective transport of ions and molecules, breaking the limitation of the conventional log-normal size distribution9,10. This method allows for independent control of several metrics of the generated nanopores, including the density, mean diameter, standard deviation and skewness of the size distribution, which will lead to the next leap in nanotechnology.

Ultralow contact resistance between semimetal and monolayer semiconductors.

Advanced beyond-silicon electronic technology requires both channel materials and also ultralow-resistance contacts to be discovered1,2. Atomically thin two-dimensional semiconductors have great potential for realizing high-performance electronic devices1,3. However, owing to metal-induced gap states (MIGS)4-7, energy barriers at the metal-semiconductor interface-which fundamentally lead to high contact resistance and poor current-delivery capability-have constrained the improvement of two-dimensional semiconductor transistors so far2,8,9. Here we report ohmic contact between semimetallic bismuth and semiconducting monolayer transition metal dichalcogenides (TMDs) where the MIGS are sufficiently suppressed and degenerate states in the TMD are spontaneously formed in contact with bismuth. Through this approach, we achieve zero Schottky barrier height, a contact resistance of 123 ohm micrometres and an on-state current density of 1,135 microamps per micrometre on monolayer MoS2; these two values are, to the best of our knowledge, the lowest and highest yet recorded, respectively. We also demonstrate that excellent ohmic contacts can be formed on various monolayer semiconductors, including MoS2, WS2 and WSe2. Our reported contact resistances are a substantial improvement for two-dimensional semiconductors, and approach the quantum limit. This technology unveils the potential of high-performance monolayer transistors that are on par with state-of-the-art three-dimensional semiconductors, enabling further device downscaling and extending Moore's law.

Aqueous Cellulose Solution Adhesive.

In the context of sustainable development, research on a biomass-based adhesive without chemical modification as a substitute for petroleum-based adhesive is now crucial. It turns out to be challenging to guarantee a simple and sustainable method to produce high-quality adhesives and subsequently manufacture multifunctional composites. Herein, the inherent properties of cellulose were exploited to generate an adhesive based on a cellulose aqueous solution. The adhesion is simple to prepare structurally and functionally complex materials in a single process. Cellulose-based daily necessities including straws, bags, and cups were prepared by adhering cellulose films, and smart devices like actuators and supercapacitors assembled by adhering hydrogels were also demonstrated. In addition, the composite boards bonded with natural biomass wastes, such as wood chips, displayed significantly stronger mechanical properties than the natural wood or commercial composite boards. Cellulose aqueous adhesives provide a straightforward, feasible, renewable, and inventive bonding technique for material shaping and the creation of multipurpose devices.

Designing artificial two-dimensional landscapes via atomic-layer substitution.

Technology advancements in history have often been propelled by material innovations. In recent years, two-dimensional (2D) materials have attracted substantial interest as an ideal platform to construct atomic-level material architectures. In this work, we design a reaction pathway steered in a very different energy landscape, in contrast to typical thermal chemical vapor deposition method in high temperature, to enable room-temperature atomic-layer substitution (RT-ALS). First-principle calculations elucidate how the RT-ALS process is overall exothermic in energy and only has a small reaction barrier, facilitating the reaction to occur at room temperature. As a result, a variety of Janus monolayer transition metal dichalcogenides with vertical dipole could be universally realized. In particular, the RT-ALS strategy can be combined with lithography and flip-transfer to enable programmable in-plane multiheterostructures with different out-of-plane crystal symmetry and electric polarization. Various characterizations have confirmed the fidelity of the precise single atomic layer conversion. Our approach for designing an artificial 2D landscape at selective locations of a single layer of atoms can lead to unique electronic, photonic, and mechanical properties previously not found in nature. This opens a new paradigm for future material design, enabling structures and properties for unexplored territories.

Revealing Variable Dependences in Hexagonal Boron Nitride Synthesis via Machine Learning.

Wafer-scale monolayer two-dimensional (2D) materials have been realized by epitaxial chemical vapor deposition (CVD) in recent years. To scale up the synthesis of 2D materials, a systematic analysis of how the growth dynamics depend on the growth parameters is essential to unravel its mechanisms. However, the studies of CVD-grown 2D materials mostly adopted the control variate method and considered each parameter as an independent variable, which is not comprehensive for 2D materials growth optimization. Herein, we synthesized a representative 2D material, monolayer hexagonal boron nitride (hBN), on single-crystalline Cu (111) by epitaxial chemical vapor deposition and varied the growth parameters to regulate the hBN domain sizes. Furthermore, we explored the correlation between two growth parameters and provided the growth windows for large flake sizes by the Gaussian process. This new analysis approach based on machine learning provides a more comprehensive understanding of the growth mechanism for 2D materials.

Electrical Control of Chemical Vapor Deposition of Graphene.

Chemical vapor deposition (CVD) is widely used for the efficient growth of low-dimensional materials. The growth mechanism comprises mass and heat transport, gas-phase and surface chemical reactions, and the interaction between the product and the substrate/catalyst. Correspondingly, the controllable parameter space is conventionally focused on the mass flow of each component, the temperature of the reaction chamber and the substrate, and the material and structure of the substrate/catalyst. Here, we report that applying an electric field between the copper substrate and a counter electrode has significant impacts on the growth of graphene. Electrochemical effect and ionic collision effect are observed in different conditions. With the assistance of negative and positive voltages applied on the growth substrate, selective growth and rapid growth of clean graphene films are achieved, respectively. We anticipate such electrical control will open up new ways to assist the synthesis of two-dimensional (2D) materials.

5-Aza-2'-deoxycytidine advances the epithelial-mesenchymal transition of breast cancer cells by demethylating Sipa1 promoter-proximal elements.

Human breast cancer cells exhibit considerable diversity in the methylation status of genomic DNA CpGs that regulate metastatic transcriptome networks. In this study, we identified human Sipa1 promoter-proximal elements that contained a CpG island and demonstrated that the methylation status of the CpG island was inversely correlated with SIPA1 protein expression in cancer cells. 5-Aza-2'-deoxycytidine (5-Aza-CdR), a DNA methyltransferase inhibitor, promoted the expression of Sipa1 in the MCF7 breast cancer cells with a low level of SIPA1 expression. On the contrary, in MDA-MB-231 breast cancer cells with high SIPA1 expression levels, hypermethylation of the CpG island negatively regulated the transcription of Sipa1 In addition, the epithelial-mesenchymal transition (EMT) was reversed after knocking down Sipa1 in MDA-MB-231 cells. However, the EMT was promoted in MCF7 cells with over-expression of SIPA1 or treated with 5-Aza-CdR. Taken together, hypomethylation of the CpG island in Sipa1 promoter-proximal elements could enhance SIPA1 expression in breast cancer cells, which could facilitate EMT of cancer cells, possibly increasing a risk of cancer cell metastasis in individuals treated with 5-Aza-CdR.

Additive manufacturing of patterned 2D semiconductor through recyclable masked growth.

The 2D van der Waals crystals have shown great promise as potential future electronic materials due to their atomically thin and smooth nature, highly tailorable electronic structure, and mass production compatibility through chemical synthesis. Electronic devices, such as field effect transistors (FETs), from these materials require patterning and fabrication into desired structures. Specifically, the scale up and future development of "2D"-based electronics will inevitably require large numbers of fabrication steps in the patterning of 2D semiconductors, such as transition metal dichalcogenides (TMDs). This is currently carried out via multiple steps of lithography, etching, and transfer. As 2D devices become more complex (e.g., numerous 2D materials, more layers, specific shapes, etc.), the patterning steps can become economically costly and time consuming. Here, we developed a method to directly synthesize a 2D semiconductor, monolayer molybdenum disulfide (MoS2), in arbitrary patterns on insulating SiO2/Si via seed-promoted chemical vapor deposition (CVD) and substrate engineering. This method shows the potential of using the prepatterned substrates as a master template for the repeated growth of monolayer MoS2 patterns. Our technique currently produces arbitrary monolayer MoS2 patterns at a spatial resolution of 2 µm with excellent homogeneity and transistor performance (room temperature electron mobility of 30 cm2 V-1 s-1 and on-off current ratio of 107). Extending this patterning method to other 2D materials can provide a facile method for the repeatable direct synthesis of 2D materials for future electronics and optoelectronics.

Bottom-Up Synthesized All-Thermal-Catalyst Aerogels for Heat-Regenerative Air Filtration.

Airborne particular matter (PM) pollution is an increasing global issue and alternative sources of filter fibers are now an area of significant focus. Compared with relatively mature hazardous gas treatments, state of the art high-efficiency PM filters still lack thermal decomposition ability for organic PM pollutants, such as soot from coal-fired power plants and waste-combustion incinerators, resulting in frequent replacement, high cost, and second-hand pollution. In this manuscript, we propose a bottom-up synthesis method to make the first all-thermal-catalyst air filter (ATCAF). Self-assembled from ∼50 nm diameter TiO2 fibers, ATCAF could not only capture the combustion-generated PM pollutants with >99.999% efficiency but also catalyze the complete decomposition of the as-captured hydrocarbon pollutants at high temperature. It has the potential of in situ eliminating the PM pollutants from burning of hydrocarbon materials leveraging the burning heat.

Enhancement of van der Waals Interlayer Coupling through Polar Janus MoSSe.

Interlayer coupling plays essential roles in the quantum transport, polaritonic, and electrochemical properties of stacked van der Waals (vdW) materials. In this work, we report the unconventional interlayer coupling in vdW heterostructures (HSs) by utilizing an emerging 2D material, Janus transition metal dichalcogenides (TMDs). In contrast to conventional TMDs, monolayer Janus TMDs have two different chalcogen layers sandwiching the transition metal and thus exhibit broken mirror symmetry and an intrinsic vertical dipole moment. Such a broken symmetry is found to strongly enhance the vdW interlayer coupling by as much as 13.2% when forming MoSSe/MoS2 HS as compared to the pristine MoS2 counterparts. Our noncontact ultralow-frequency Raman probe, linear chain model, and density functional theory calculations confirm the enhancement and reveal the origins as charge redistribution in Janus MoSSe and reduced interlayer distance. Our results uncover the potential of tuning interlayer coupling strength through Janus heterostacking.

Rubbery Chitosan/Carrageenan Hydrogels Constructed through an Electroneutrality System and Their Potential Application as Cartilage Scaffolds.

In the present work, the bulk and homogeneous composite hydrogels were successfully constructed from positively charged chitosan (CS) and negatively charged carrageenan (CG) in alkali/urea aqueous solution via a simple one-step approach for the first time. An electroneutral CS solution was achieved in alkali/urea, leading to a homogeneous solution blended by CS and CG, which could not be realized in acidic medium because of the agglomeration caused by polycation and polyanion. Subsequently, the CS/CG composite hydrogels with multiple cross-linked networks were prepared from blend solution by using epichlorohydrin (ECH) as the cross-linking agent. The composite hydrogels exhibited hierarchically porous architecture, excellent mechanical properties as well as pH- and salt-responsiveness. Importantly, the composite hydrogels were successfully applied for spreading ATDC5 cells, showing high attachment and proliferation of cells. The results of fluorescent micrographs and scanning electronic microscope images revealed that the CS/CG composite hydrogels enhanced the adhesion and viability of ATDC5 cells. The alcian blue staining, glycosaminoglycan quantification, and real-time PCR analysis proved that the CS/CG composite hydrogels could induce chondrogenic differentiation of ATDC5 cells in vitro, exhibiting great potential for application in cartilage repair. This work provides a facile and fast fabrication pathway for the construction of ampholytic hydrogel from polycation and polyanion in an electroneutrality system.

Cationic hydrophobicity promotes dissolution of cellulose in aqueous basic solution by freezing-thawing.

The physical dissolution of cellulose in aqueous solutions of tetramethyl ammonium hydroxide, triethylmethyl ammonium hydroxide, tetraethyl ammonium hydroxide, benzyltrimethyl ammonium hydroxide, benzyltriethyl ammonium hydroxide, NaOH and LiOH via freezing-thawing was investigated. Increasing the hydrophobicity of the cation greatly improved its dissolution capacity, leading to significant enhancement of cellulose solubility and stability against chain aggregation and gelation. The hydrophobic cations accumulated at the cellulose interface and decreased the surface tension, favouring dispersion of the disintegrated cellulose due to its amphiphilicity; this was consistent with molecular dynamics simulations. On the other hand, the solubility of cellulose followed the Hofmeister series, and cations with greater kosmotropicity originating from their greater hydrophobicity exhibited stronger dissolution power; this observed interaction pattern may be useful for further exploration and designation of novel solvents of cellulose. These aqueous quaternary ammonium hydroxides can be readily recycled and reused, which presents great potential in the green chemistry field.

High-Strength Films Consisted of Oriented Chitosan Nanofibers for Guiding Cell Growth.

Chitosan has biocompatibility and biodegradability; however, the practical use of the bulk chitosan materials is hampered by its poor strength, which can not satisfy the mechanical property requirement of organs. Thus, the construction of highly strong chitosan-based materials has attracted much attention. Herein, the high strength nanofibrous hydrogels and films (CS-E) were fabricated from the chitosan solution in LiOH/KOH/urea aqueous system via a mild regenerating process. Under the mild condition (ethanol at low temperature) without the severe fluctuation in the system, the alkaline-urea shell around the chitosan chains was destroyed, and the naked chitosan molecules had sufficient time for the orderly arrangement in parallel manner to form relatively perfect nanofibers. The nanofibers physically cross-linked to form CS-E hydrogels, which could be easily oriented by drawing to achieve a maximum orientation index of 84%, supported by the scanning electron microscopy and two-dimensional wide-angle X-ray diffraction. The dried CS-E films could be bent and folded arbitrarily to various complex patterns and shapes. The oriented CS-E films displayed even ultrahigh tensile strength (282 MPa), which was 5.6× higher than the chitosan films prepared by the traditional acid dissolving method. The CS-E hydrogels possessed hierarchically porous structure, beneficial to the cell adhesion, transportation of nutrients, and removal of metabolic byproducts. The cell assay results demonstrated that the CS-E hydrogels were no cytotoxicity, and osteoblastic cells could adhere, spread, and proliferate well on their surface. Furthermore, the oriented CS-E hydrogels could regulate the directional growth of osteoblastic cells along the orientation direction, on the basis of the filopodia of the cells to extend and adhere on the nanofibers. This work provided a novel approach to construct the oriented high strength chitosan hydrogels and films.

Weak interactions and their impact on cellulose dissolution in an alkali/urea aqueous system.

Weak interactions, though sometimes easily ignored, play an important role in macromolecule dissolution. In this work, the characterization of weak interactions between urea and cellulose in a LiOH/urea aqueous solution was accomplished and confirmed in situ, for the first time, using PFG-SE NMR, FT-IR and solvatochromic methods, etc. The NMR results indicated the binding of urea with cellulose in the solution, demonstrating the existence of the weak interactions between them. Subsequently, the solvatochromic methods revealed that urea hardly affected the hydrogen bond donor (HBD acidity) and hydrogen bond acceptor (HBA basicity) properties of the solvent, but was related to its dipolarity and polarizability, indicating that dispersion forces existed therein, but not likely hydrogen bonding, which was also supported by the FT-IR. Furthermore, the impact of weak interactions between urea and cellulose was demonstrated to facilitate the dissolving process. The fine dispersion and good stability of cellulose in the solution were maintained by mitigating the effect of the hydrophobic portions from all the dilute, semi-dilute and concentrated regimes, supported by the results of dynamic light scattering (DLS), rheology, NMR, etc. Therefore, the transmittance and mechanical properties of the regenerated cellulose materials prepared from the cellulose solution in the alkali/urea aqueous system were enhanced, compared with those in the alkali only system. This work provided significant and new experimental insights into the non-covalent weak interactions between urea and macromolecules from the viewpoints of polymer physics and physical chemistry, which could never be ignored and underestimated. The indispensable weak interactions in the system are also important for the green conversion of natural biomass into new materials via physical processes.

Cation/macromolecule interaction in alkaline cellulose solution characterized with pulsed field-gradient spin-echo NMR spectroscopy.

As a breakthrough to the traditional 1H diffusometry, the interaction of cations with cellulose is investigated via7Li and 23Na PFG-SE NMR. The diffusion coefficient of Li+ decreases more than that of Na+ with the addition of cellulose, which indicates a stronger binding of LiOH with the macromolecule. Therefore, a new, facile, accurate and repeatable method to characterize ion/polymer interactions is established.

High-Sulfur-Vacancy Amorphous Molybdenum Sulfide as a High Current Electrocatalyst in Hydrogen Evolution.

The remote hydrogen plasma is able to create abundant S-vacancies on amorphous molybdenum sulfide (a-MoSx ) as active sites for hydrogen evolution. The results demonstrate that the plasma-treated a-MoSx exhibits superior performance and higher stability than Pt in a proton exchange membrane based electrolyzers measurement as a proof-of-concept of industrial application.

Exciton mapping at subwavelength scales in two-dimensional materials.

Spatially resolved electron-energy-loss spectroscopy (EELS) is performed at diffuse interfaces between MoS2 and MoSe2 single layers. With a monochromated electron source (20 meV) we successfully probe excitons near the interface by obtaining the low loss spectra at the nanometer scale. The exciton maps clearly show variations even with a 10 nm separation between measurements; consequently, the optical band gap can be measured with nanometer-scale resolution, which is 50 times smaller than the wavelength of the emitted photons. By performing core-loss EELS at the same regions, we observe that variations in the excitonic signature follow the chemical composition. The exciton peaks are observed to be broader at interfaces and heterogeneous regions, possibly due to interface roughness and alloying effects. Moreover, we do not observe shifts of the exciton peak across the interface, possibly because the interface width is not much larger than the exciton Bohr radius.

Hydrophobic modification of chitin whisker and its potential application in structuring oil.

A facile approach was developed to modify chitin whiskers by reacting them with bromohexadecane, and the potential application of modified whiskers in structuring oil was evaluated. The results of Fourier transform infrared spectra (FT-IR), wide-angle X-ray diffraction (XRD), elemental analysis, solid (13)C NMR, and differential scanning calorimeter (DSC) confirmed that the long alkyl chains were successfully introduced to the chitin whiskers and endowed them with improved hydrophobicity and thermal transition. By hot pressing the modified whiskers, the highly hydrophobic whisker sheets were constructed, showing high contact angles close to 150°. The hydrophobic interaction between the long alkyl chains and chitin backbone induced the crystal alignment with micro-nano structure, leading to the surface roughness and high hydrophobicity of the sheets. Furthermore, the modified whiskers could form a stable dispersion in sunflower oil, displaying a remarkable thickening effect. The viscosity of the oily suspension exhibited temperature dependence and shear-thinning behavior, suggesting great potentials to fabricate oleogel without adding any saturated fat. Furthermore, the intrinsic biocompatibility of α-chitin structure benefits its application in foodstuff, cosmetics, and medical fields.

Effects of Chitin Whiskers on Physical Properties and Osteoblast Culture of Alginate Based Nanocomposite Hydrogels.

Novel nanocomposite hydrogels composed of polyelectrolytes alginate and chitin whiskers with biocompatibility were successfully fabricated based on the pH-induced charge shifting behavior of chitin whiskers. The chitin whiskers with mean length and width of 300 and 20 nm were uniformly dispersed in negatively charged sodium alginate aqueous solution, leading to the formation of the homogeneous nanocomposite hydrogels. The experimental results indicated that their mechanical properties were significantly improved compared to alginate hydrogel and the swelling trends were inhibited as a result of the strong electrostatic interactions between the chitin whiskers and alginate. The nanocomposite hydrogels exhibited certain crystallinity and hierarchical structure with nanoscale chitin whiskers, similar to the structure of the native extracellular matrix. Moreover, the nanocomposite hydrogels were successfully applied as bone scaffolds for MC3T3-E1 osteoblast cells, showing their excellent biocompatibility and low cytotoxicity. The results of fluorescent micrographs and scanning electronic microscope (SEM) images revealed that the addition of chitin whiskers into the nanocomposite hydrogels markedly promoted the cell adhesion and proliferation of the osteoblast cells. The biocompatible nanocomposite hydrogels have potential application in bone tissue engineering.