Associations of circulating total p-cresylsulfate and indoxyl sulfate concentrations with central obesity in patients with stable coronary artery disease: sex-specific insights.

BACKGROUND/AIMS: Elevated systemic inflammation, common in obesity, increases cardiovascular disease risk. Obesity is linked to a pro-inflammatory gut microbiota that releases uremic toxins like p-cresylsulfate (PCS) and indoxyl sulfate (IS), which are implicated in coronary atherosclerosis, insulin resistance, and chronic kidney disease. This study examines the relationship between total PCS and IS levels and central obesity in patients with stable coronary artery disease (CAD). METHODS: A cross-sectional study was conducted on 373 consecutive patients with stable CAD from a single center. Serum levels of total PCS and IS were measured using an Ultra Performance LC System. Central obesity was evaluated using a body shape index (ABSI) and conicity index (CI). Six obesity-related proteins were also analyzed. Structural equation modeling (SEM) assessed direct and indirect effects of total PCS, IS, and the six obesity-related proteins on central obesity. RESULTS: Significant positive correlations were found between total PCS and IS with waist-to-hip ratio (WHR) (r = 0.174, p = 0.005 for total PCS; r = 0.144, p = 0.021 for IS), CI (r = 0.273, p < 0.0001 for total PCS; r = 0.260, p < 0.0001 for IS), and ABSI (r = 0.297, p < 0.0001 for total PCS; r = 0.285, p < 0.0001 for IS) in male patients, but not in female patients. Multivariate analysis showed higher odds ratios (ORs) for elevated CI (OR = 3.18, 95% CI: 1.54-6.75, p = 0.002) and ABSI (OR = 3.28, 95% CI: 1.54-7.24, p = 0.002) in patients with high PCS levels, and elevated CI (OR = 2.30, 95% CI: 1.15-4.66, p = 0.018) and ABSI (OR = 2.22, 95% CI: 1.07-4.72, p = 0.033) in those with high IS levels, compared to those with low toxin levels. SEM analysis indicated that total PCS and IS directly impacted central obesity indices and indirectly influenced central adiposity measures like WHR through high sensitivity C-reactive protein (hs-CRP) (ß = 0.252, p < 0.001). CONCLUSIONS: Circulating total PCS and IS contribute to central obesity in male patients with stable CAD, partially mediated by hs-CRP.

Fusion extracted features from deep learning for identification of multiple positioning errors in dental panoramic imaging.

BACKGROUND: Dental panoramic imaging plays a pivotal role in dentistry for diagnosis and treatment planning. However, correctly positioning patients can be challenging for technicians due to the complexity of the imaging equipment and variations in patient anatomy, leading to positioning errors. These errors can compromise image quality and potentially result in misdiagnoses. OBJECTIVE: This research aims to develop and validate a deep learning model capable of accurately and efficiently identifying multiple positioning errors in dental panoramic imaging. METHODS AND MATERIALS: This retrospective study used 552 panoramic images selected from a hospital Picture Archiving and Communication System (PACS). We defined six types of errors (E1-E6) namely, (1) slumped position, (2) chin tipped low, (3) open lip, (4) head turned to one side, (5) head tilted to one side, and (6) tongue against the palate. First, six Convolutional Neural Network (CNN) models were employed to extract image features, which were then fused using transfer learning. Next, a Support Vector Machine (SVM) was applied to create a classifier for multiple positioning errors, using the fused image features. Finally, the classifier performance was evaluated using 3 indices of precision, recall rate, and accuracy. RESULTS: Experimental results show that the fusion of image features with six binary SVM classifiers yielded high accuracy, recall rates, and precision. Specifically, the classifier achieved an accuracy of 0.832 for identifying multiple positioning errors. CONCLUSIONS: This study demonstrates that six SVM classifiers effectively identify multiple positioning errors in dental panoramic imaging. The fusion of extracted image features and the employment of SVM classifiers improve diagnostic precision, suggesting potential enhancements in dental imaging efficiency and diagnostic accuracy. Future research should consider larger datasets and explore real-time clinical application.

Segmentation of liver tumors with abdominal computed tomography using fully convolutional networks.

BACKGROUND: Dividing liver organs or lesions depicting on computed tomography (CT) images could be applied to help tumor staging and treatment. However, most existing image segmentation technologies use manual or semi-automatic analysis, making the analysis process costly and time-consuming. OBJECTIVE: This research aims to develop and apply a deep learning network architecture to segment liver tumors automatically after fine tuning parameters. METHODS AND MATERIALS: The medical imaging is obtained from the International Symposium on Biomedical Imaging (ISBI), which includes 3D abdominal CT scans of 131 patients diagnosed with liver tumors. From these CT scans, there are 7,190 2D CT images along with the labeled binary images. The labeled binary images are regarded as gold standard for evaluation of the segmented results by FCN (Fully Convolutional Network). The backbones of FCN are extracted from Xception, InceptionresNetv2, MobileNetv2, ResNet18, ResNet50 in this study. Meanwhile, the parameters including optimizers (SGDM and ADAM), size of epoch, and size of batch are investigated. CT images are randomly divided into training and testing sets using a ratio of 9:1. Several evaluation indices including Global Accuracy, Mean Accuracy, Mean IoU (Intersection over Union), Weighted IoU and Mean BF Score are applied to evaluate tumor segmentation results in the testing images. RESULTS: The Global Accuracy, Mean Accuracy, Mean IoU, Weighted IoU, and Mean BF Scores are 0.999, 0.969, 0.954, 0.998, 0.962 using ResNet50 in FCN with optimizer SGDM, batch size 12, and epoch 9. It is important to fine tuning the parameters in FCN model. Top 20 FNC models enable to achieve higher tumor segmentation accuracy with Mean IoU over 0.900. The occurred frequency of InceptionresNetv2, MobileNetv2, ResNet18, ResNet50, and Xception are 9, 6, 3, 5, and 2 times. Therefore, the InceptionresNetv2 has higher performance than others. CONCLUSIONS: This study develop and test an automated liver tumor segmentation model based on FCN. Study results demonstrate that many deep learning models including InceptionresNetv2, MobileNetv2, ResNet18, ResNet50, and Xception have high potential to segment liver tumors from CT images with accuracy exceeding 90%. However, it is still difficult to accurately segment tiny and small size tumors by FCN models.

Efficient Strike Artifact Reduction Based on 3D-Morphological Structure Operators from Filtered Back-Projection PET Images.

Positron emission tomography (PET) can provide functional images and identify abnormal metabolic regions of the whole-body to effectively detect tumor presence and distribution. The filtered back-projection (FBP) algorithm is one of the most common images reconstruction methods. However, it will generate strike artifacts on the reconstructed image and affect the clinical diagnosis of lesions. Past studies have shown reduction in strike artifacts and improvement in quality of images by two-dimensional morphological structure operators (2D-MSO). The morphological structure method merely processes the noise distribution of 2D space and never considers the noise distribution of 3D space. This study was designed to develop three-dimensional-morphological structure operators (3D MSO) for nuclear medicine imaging and effectively eliminating strike artifacts without reducing image quality. A parallel operation was also used to calculate the minimum background standard deviation of the images for three-dimensional morphological structure operators with the optimal response curve (3D-MSO/ORC). As a result of Jaszczak phantom and rat verification, 3D-MSO/ORC showed better denoising performance and image quality than the 2D-MSO method. Thus, 3D MSO/ORC with a 3 × 3 × 3 mask can reduce noise efficiently and provide stability in FBP images.

Questionable necessity of nitroglycerin for diagnostic coronary artery examination using 320-row multi-detector computed tomography.

OBJECTIVE: This study aims to analyze and compare the diagnostic effectiveness of 320-row multi-detector computed tomography for coronary artery angiography (MDCTA) in subjects with and without sublingual vasodilator (nitroglycerin). MATERIALS AND METHODS: From September 2015 to September 2016, 70 individuals without history of major cardiovascular diseases who underwent MDCTA for health examination were retrospectively categorized into sublingual nitroglycerin (NTG) and non-NTG groups. Medical history, CT dose index (CTDI), and multi-slice CT images were compared between two groups. A diameter of coronary artery (DA, mm) was computed and analyzed. RESULTS: A total of 41 males and 29 females (mean age: 55.43±8.84 years, range: 34- 76) were reviewed. Normal and abnormal MDCTA findings were noted in 54 and 16 participants, respectively, with the detection rate of coronary artery disease being 23%. There was no significant difference in inter-observer variability of coronary CTA image quality and diagnosis between the NTG and non-NTG groups among three experienced radiologists. Although the percentage dilatation of left anterior descending branch (LAD), right coronary artery (RCA) and left circumflex branch (LCX) following in the NTG group were 12.4%, 12.8% and 25.3%, respectively (p < 0.01), there was no significant difference in image quality and diagnosis between the two groups. CONCLUSIONS: Despite the recommendation of routine nitroglycerin use for subjects undergoing computed tomography for coronary artery angiography, our results showed no significant advantage of its use in improving image quality and rate of diagnosis accuracy.

Combination of a Self-Regulation Module and Mobile Application to Enhance Treatment Outcome for Patients with Acne.

Background and Objectives: Acne, an inflammatory disorder of the pilosebaceous unit associated with both physiological and psychological morbidities, should be considered a chronic disease. The application of self-regulation theory and therapeutic patient education has been widely utilized in different health-related areas to help patient with a chronic disease to attain better behavioral modification. The present study aims at investigating the treatment efficacy of combining a self-regulation-based patient education module with mobile application in acne patients. Materials and Methods: This was one-grouped pretest-posttest design at a single tertiary referral center with the enrollment of 30 subjects diagnosed with acne vulgaris. Relevant information was collected before (week 0) and after (week 4) treatment in the present study, including the Acne Self-Regulation Inventory (ASRI), Cardiff Acne Disability Index (CADI), and Dermatology Life Quality Index (DLQI) that involved a questionnaire-based subjective evaluation of the patient's ability in self-regulation and quality of life as well as clinical Acne Grading Scores (AGS) that objectively assessed changes in disease severity. To reinforce availability and feasibility, an individualized platform was accessible through mobile devices for real-time problem solving between hospital visits. Results: Thirty subjects completed the designed experiment. An analysis of the differences between scores of pretest and posttest of ASRI demonstrated substantial elevations (p < 0.001). The questionnaire survey of CADI and DLQI dropped significantly after the application of a self-regulation-based patient education module with a mobile application, revealing substantial reductions in both parameters (p < 0.001). The sign test demonstrated a remarkably significant difference in AGS (Z = -7.38, p < 0.001), indicating notable improvement in the clinical severity of acne after treatment. Conclusions: After incorporating modern mobile application, a self-regulation-based therapeutic patient education module could significantly improve treatment outcomes among acne patients.

Diagnosed chest lesion on diffusion-weighted magnetic resonance images using apparent diffusion coefficients.

PURPOSE: A novel diagnostic method using the standard deviation (SD) value of apparent diffusion coefficient (ADC) by diffusion-weighted (DWI) magnetic resonance imaging (MRI) is applied for differential diagnosis of primary chest cancers, metastatic tumors and benign tumors. MATERIALS AND METHODS: This retrospective study enrolled 27 patients (20 males, 7 female; age, 15-85; mean age, 68) who had thoracic mass lesions in the last three years and underwent an MRI chest examination at our institution. In total, 29 mass lesions were analyzed using SD of ADC and DWI. Lesions were divided into five groups: Primary lung cancers (N = 10); esophageal cancers (N = 5); metastatic tumors (N = 8); benign tumors (N = 3); and inflammatory lesions (N = 3). Quantitative assessment of MRI parameters of mass lesions was performed. The ADC value was acquired based on the average of the entire tumor area. The error-plot, t-test and the area under receiver operating characteristic (AUC) were applied for statistical analysis. RESULTS: The SD of ADC value (mean±SD) was (4.867±1.359)×10-4 mm2/sec in primary lung cancers, and (3.598±0.350)×10-4 mm2/sec in metastatic tumors. The SD of ADC values of primary lung cancers and metastatic tumors (P <  0.05) were significantly different and the AUC was 0.800 (P <  0.05). The means of SD of ADC values was 4.532±1.406×10-4 mm2/sec and 2.973±0.364×10-4 mm2/sec for malignant tumors (including primary lung cancers, esophageal cancers) and benign tumors with respectively. The mean of SD of ADC values between malignant chest tumors and benign chest tumors was shown significant difference (P <  0.01). The values of AUC was 0.967 between malignant chest tumors and benign chest tumors (P <  0.05). The ADC values for primary lung cancers, metastatic tumors and benign tumors were not significantly difference (P >  0.05). CONCLUSIONS: The mean of SD of ADC value by DWI can be used for differential diagnosis of chest lesions.

Investigated geometrical characteristics and image density of left ventricle of multi-detector computed tomography in early coronary artery disease patients.

BACKGROUND: Coronary artery disease (CAD) remains the leading cause of death worldwide. Currently, cardiac multi-detector computed tomography (MDCT) is widely used to diagnose CAD. The purpose in this study is to identify informative and useful predictors from left ventricular (LV) in the early CAD patients using cardiac MDCT images. MATERIALS AND METHODS: Study groups comprised 42 subjects who underwent a screening health examination, including laboratory testing and cardiac angiography by 64-slice MDCT angiography. Two geometrical characteristics and one image density were defined as shape, size and stiffness on MDCT image. The t-test, logistic regression, and receiver operating characteristic curve were applied to assess and identify the significant predictors. The Kappa statistics was used to exam the agreements with physician's judgments (i.e., Golden of True, GOT). RESULTS: The proposed three characteristics of LV MDCT images are important predictors and risk factors for the early CAD patients. These predictors present over 80% of AUC and higher odds ratio. The Kappa statistics was 0.68 for the combinations of shape and stiffness into logistic regression. CONCLUSIONS: The shape, size and stiffness of the left ventricular on MDCT can be used to be the effective indicators in the early CAD patients. Besides, the combinations of shape and stiffness into logistic regression could provide substantial agreement with physician's judgments.

Scattering correction algorithm in the PET sinogram using the factorial design of experimental method: A phantom study.

Positron emission tomography (PET) had been utilized to image gene therapy, estimate tumor growth, detect neural function of the brain, and diagnose disease. However, sinogram noise always results inaccurate PET images. The factorial design of experiment (DOE), a statistical method, was applied to investigate, correct and estimate the fraction of scattering of 2D sinogram in PET. The DOE was included as factors of angle views and scatter media with two levels designed. The PET sinogram after scattering correction was then reconstructed by filtered back projection (FBP). Both Ge-68 uniform phantom and Jaszczak anthropomorphic torso phantom were applied to exam the performance of presented scattering correction algorithm. The signal-to-noise ratio (SNR), standard deviation (STD) of background, and full width at half maximum (FWHM), and uniformity test were applied to validate the performance of presented method. The proposed method provides a narrower FWHM, smaller STD of the background, higher SNR and better uniformity than those of original protocols. This method should be tested for accuracy and feasibility with three-dimensional phantoms or real animal studies and consideration effects of cross-talk between slices in future work.

Analyzed outcome for embolization of hepatic carcinoma by C-arm angiographic computed tomography.

PURPOSE: This study evaluated and monitored the outcome of angiographic embolization of hepatic carcinoma by real-time C-arm angiographic computed tomography under number of tumors, size of tumors, and patient's age.METHODS AND MARTIALS: In total, 142 patients underwent angiographic embolization of hepatic carcinoma. The control group, 71 patients, underwent conventional angiographic (CA) embolization of hepatic carcinoma. The experimental group, 71 patients, underwent C-arm angiographic computed tomography (CCT) embolization of hepatic carcinoma. The numbers of angiographic embolization, number of tumors, size of tumors, and patients ages were recorded for comparisons between groups by analysis of variance (ANOVA) with cross-interaction and the chi-square test (cross table). RESULTS: The age ranges were 20-84 and 35-84 years old for the experimental and control groups respectively. Average number of angiographic embolizations of hepatic carcinomas were 2.63 ± 1.84 and 5.32 ± 2.01 for the experimental and control groups. The number of angiographic embolizations under number of tumors, size of tumors, and patients ages between groups were significantly different (P< 0.05). The effective analyses of transcatheter arterial chemoembolization (TACE) by CCT were significant by chi-square test (P< 0.05) under ⩽ 3 cm and patients aged ⩽ 60. CONCLUSION: The main advantage by CCT for undergoing TACE under tumor size smaller than 3 cm and numbers of tumor smaller 3 times were more significantly effective than those by CA. The CCT combined with TACE had high potentially reduced numbers of undergoing TACE.

Transfer learning with CNNs for efficient prostate cancer and BPH detection in transrectal ultrasound images.

Early detection of prostate cancer (PCa) and benign prostatic hyperplasia (BPH) is crucial for maintaining the health and well-being of aging male populations. This study aims to evaluate the performance of transfer learning with convolutional neural networks (CNNs) for efficient classification of PCa and BPH in transrectal ultrasound (TRUS) images. A retrospective experimental design was employed in this study, with 1380 TRUS images for PCa and 1530 for BPH. Seven state-of-the-art deep learning (DL) methods were employed as classifiers with transfer learning applied to popular CNN architectures. Performance indices, including sensitivity, specificity, accuracy, positive predictive value (PPV), negative predictive value (NPV), Kappa value, and Hindex (Youden's index), were used to assess the feasibility and efficacy of the CNN methods. The CNN methods with transfer learning demonstrated a high classification performance for TRUS images, with all accuracy, specificity, sensitivity, PPV, NPV, Kappa, and Hindex values surpassing 0.9400. The optimal accuracy, sensitivity, and specificity reached 0.9987, 0.9980, and 0.9980, respectively, as evaluated using twofold cross-validation. The investigated CNN methods with transfer learning showcased their efficiency and ability for the classification of PCa and BPH in TRUS images. Notably, the EfficientNetV2 with transfer learning displayed a high degree of effectiveness in distinguishing between PCa and BPH, making it a promising tool for future diagnostic applications.

Fusion-Extracted Features by Deep Networks for Improved COVID-19 Classification with Chest X-ray Radiography.

Convolutional neural networks (CNNs) have shown promise in accurately diagnosing coronavirus disease 2019 (COVID-19) and bacterial pneumonia using chest X-ray images. However, determining the optimal feature extraction approach is challenging. This study investigates the use of fusion-extracted features by deep networks to improve the accuracy of COVID-19 and bacterial pneumonia classification with chest X-ray radiography. A Fusion CNN method was developed using five different deep learning models after transferred learning to extract image features (Fusion CNN). The combined features were used to build a support vector machine (SVM) classifier with a RBF kernel. The performance of the model was evaluated using accuracy, Kappa values, recall rate, and precision scores. The Fusion CNN model achieved an accuracy and Kappa value of 0.994 and 0.991, with precision scores for normal, COVID-19, and bacterial groups of 0.991, 0.998, and 0.994, respectively. The results indicate that the Fusion CNN models with the SVM classifier provided reliable and accurate classification performance, with Kappa values no less than 0.990. Using a Fusion CNN approach could be a possible solution to enhance accuracy further. Therefore, the study demonstrates the potential of deep learning and fusion-extracted features for accurate COVID-19 and bacterial pneumonia classification with chest X-ray radiography.

Classification of Color Fundus Photographs Using Fusion Extracted Features and Customized CNN Models.

This study focuses on overcoming challenges in classifying eye diseases using color fundus photographs by leveraging deep learning techniques, aiming to enhance early detection and diagnosis accuracy. We utilized a dataset of 6392 color fundus photographs across eight disease categories, which was later augmented to 17,766 images. Five well-known convolutional neural networks (CNNs)-efficientnetb0, mobilenetv2, shufflenet, resnet50, and resnet101-and a custom-built CNN were integrated and trained on this dataset. Image sizes were standardized, and model performance was evaluated via accuracy, Kappa coefficient, and precision metrics. Shufflenet and efficientnetb0demonstrated strong performances, while our custom 17-layer CNN outperformed all with an accuracy of 0.930 and a Kappa coefficient of 0.920. Furthermore, we found that the fusion of image features with classical machine learning classifiers increased the performance, with Logistic Regression showcasing the best results. Our study highlights the potential of AI and deep learning models in accurately classifying eye diseases and demonstrates the efficacy of custom-built models and the fusion of deep learning and classical methods. Future work should focus on validating these methods across larger datasets and assessing their real-world applicability.

Analyzing coronary artery disease in patients with low CAC scores by 64-slice MDCT.

PURPOSE: Coronary artery calcification (CAC) scores are widely used to determine risk for Coronary Artery Disease (CAD). A CAC score does not have the diagnostic accuracy needed for CAD. This work uses a novel efficient approach to predict CAD in patients with low CAC scores. MATERIALS AND METHODS: The study group comprised 86 subjects who underwent a screening health examination, including laboratory testing, CAC scanning, and cardiac angiography by 64-slice multidetector computed tomographic angiography. Eleven physiological variables and three personal parameters were investigated in proposed model. Logistic regression was applied to assess the sensitivity, specificity, and accuracy of when using individual variables and CAC score. Meta-analysis combined physiological and personal parameters by logistic regression. RESULTS: The diagnostic sensitivity of the CAC score was 14.3% when the CAC score was ≤30. Sensitivity increased to 57.13% using the proposed model. The statistically significant variables, based on beta values and P values, were family history, LDL-c, blood pressure, HDL-c, age, triglyceride, and cholesterol. CONCLUSIONS: The CAC score has low negative predictive value for CAD. This work applied a novel prediction method that uses patient information, including physiological and society parameters. The proposed method increases the accuracy of CAC score for predicting CAD.

Deep Transfer Learning for the Multilabel Classification of Chest X-ray Images.

Chest X-ray (CXR) is widely used to diagnose conditions affecting the chest, its contents, and its nearby structures. In this study, we used a private data set containing 1630 CXR images with disease labels; most of the images were disease-free, but the others contained multiple sites of abnormalities. Here, we used deep convolutional neural network (CNN) models to extract feature representations and to identify possible diseases in these images. We also used transfer learning combined with large open-source image data sets to resolve the problems of insufficient training data and optimize the classification model. The effects of different approaches of reusing pretrained weights (model finetuning and layer transfer), source data sets of different sizes and similarity levels to the target data (ImageNet, ChestX-ray, and CheXpert), methods integrating source data sets into transfer learning (initiating, concatenating, and co-training), and backbone CNN models (ResNet50 and DenseNet121) on transfer learning were also assessed. The results demonstrated that transfer learning applied with the model finetuning approach typically afforded better prediction models. When only one source data set was adopted, ChestX-ray performed better than CheXpert; however, after ImageNet initials were attached, CheXpert performed better. ResNet50 performed better in initiating transfer learning, whereas DenseNet121 performed better in concatenating and co-training transfer learning. Transfer learning with multiple source data sets was preferable to that with a source data set. Overall, transfer learning can further enhance prediction capabilities and reduce computing costs for CXR images.

Identifying the Posture of Young Adults in Walking Videos by Using a Fusion Artificial Intelligent Method.

Many neurological and musculoskeletal disorders are associated with problems related to postural movement. Noninvasive tracking devices are used to record, analyze, measure, and detect the postural control of the body, which may indicate health problems in real time. A total of 35 young adults without any health problems were recruited for this study to participate in a walking experiment. An iso-block postural identity method was used to quantitatively analyze posture control and walking behavior. The participants who exhibited straightforward walking and skewed walking were defined as the control and experimental groups, respectively. Fusion deep learning was applied to generate dynamic joint node plots by using OpenPose-based methods, and skewness was qualitatively analyzed using convolutional neural networks. The maximum specificity and sensitivity achieved using a combination of ResNet101 and the naïve Bayes classifier were 0.84 and 0.87, respectively. The proposed approach successfully combines cell phone camera recordings, cloud storage, and fusion deep learning for posture estimation and classification.

Integrating ECG Monitoring and Classification via IoT and Deep Neural Networks.

Anesthesia assessment is most important during surgery. Anesthesiologists use electrocardiogram (ECG) signals to assess the patient's condition and give appropriate medications. However, it is not easy to interpret the ECG signals. Even physicians with more than 10 years of clinical experience may still misjudge. Therefore, this study uses convolutional neural networks to classify ECG image types to assist in anesthesia assessment. The research uses Internet of Things (IoT) technology to develop ECG signal measurement prototypes. At the same time, it classifies signal types through deep neural networks, divided into QRS widening, sinus rhythm, ST depression, and ST elevation. Three models, ResNet, AlexNet, and SqueezeNet, are developed with 50% of the training set and test set. Finally, the accuracy and kappa statistics of ResNet, AlexNet, and SqueezeNet in ECG waveform classification were (0.97, 0.96), (0.96, 0.95), and (0.75, 0.67), respectively. This research shows that it is feasible to measure ECG in real time through IoT and then distinguish four types through deep neural network models. In the future, more types of ECG images will be added, which can improve the real-time classification practicality of the deep model.

Classification for liver ultrasound tomography by posterior attenuation correction with a phantom study.

The B-mode ultrasound usually contains scattering speckle noise which reduces the detailed resolution of the target and is regarded as an intrinsic noise that interferes with diagnostic precision. The aim of this study was to classify hepatic steatosis through applying attenuation correction with a phantom to reduce speckle noise in liver ultrasound tomography in patients. This retrospective study applied three randomized groups signifying different liver statuses. A total of 114 patients' effective liver ultrasound images-30 normal, 44 fatty, and 40 cancerous-were included. The proposed depth attenuation correction method was first applied to images. Three regions of interest were manually drawn on the images. Next, five feature values for the regions of interest were calculated. Finally, the hybrid method of logistic regression and support vector machine was employed to classify the ultrasound images with 10-fold cross-validation. The accuracy, kappa statistic, and mean absolute error of the proposed hybrid method were 87.5%, 0.812, and 0.119, respectively, which were higher than those of the logistic regression method-75.0%, 0.548, and 0.280-or those of the support vector machine method-75.7%, 0.637, and 0.293-respectively. Therefore, the hybrid method has been proven to be more accurate and have better performance and less error than either single method. The hybrid method provided acceptable accuracy of classification in three liver ultrasound image groups after depth attenuation correction. In the future, the deep learning approaches may be considered for the application in classifying liver ultrasound images.