Application of Medical Image Navigation Technology in Minimally Invasive Puncture Robot.

Microneedle puncture is a standard minimally invasive treatment and surgical method, which is widely used in extracting blood, tissues, and their secretions for pathological examination, needle-puncture-directed drug therapy, local anaesthesia, microwave ablation needle therapy, radiotherapy, and other procedures. The use of robots for microneedle puncture has become a worldwide research hotspot, and medical imaging navigation technology plays an essential role in preoperative robotic puncture path planning, intraoperative assisted puncture, and surgical efficacy detection. This paper introduces medical imaging technology and minimally invasive puncture robots, reviews the current status of research on the application of medical imaging navigation technology in minimally invasive puncture robots, and points out its future development trends and challenges.

Tough and Conductive Nacre-inspired MXene/Epoxy Layered Bulk Nanocomposites.

A long-standing quest in materials science has been the development of tough epoxy resin nanocomposites for use in numerous applications. Inspired by nacre, here we report tough and conductive MXene/epoxy layered bulk nanocomposites. The orientation of MXene lamellar scaffolds is enhanced by annealing treatment. The improved interfacial interactions between MXene lamellar scaffold and epoxy through surface chemical modification resulted in a synergistic effect. Tailoring the interlayer spacing of MXene nanosheets to a critical distance resulted in a fracture toughness about eight times higher than that of pure epoxy, surpassing other epoxy nanocomposites. Our nacre-inspired MXene/epoxy layered bulk nanocomposites also show high electrical conductivity that provides self-monitoring capability for structural integrity and exhibits an excellent electromagnetic interference shielding efficiency. Our proposed strategy provides an avenue for fabricating high-performance epoxy nanocomposites.

Weld Feature Extraction Based on Semantic Segmentation Network.

Laser welding is an indispensable link in most types of industrial production. The realization of welding automation by industrial robots can greatly improve production efficiency. In the research and development of the welding seam tracking system, information on the position of the weld joint needs to be obtained accurately. For laser welding images with strong and complex interference, a weld tracking module was designed to capture real-time images of the weld, and a total of 737, 1920 × 1200 pixel weld images were captured using the device, of which 637 were used to create the dataset, and the other 100 were used as images to test the segmentation success rate. Based on the pixel-level segmentation capability of the semantic segmentation network, this study used an encoder-decoder architecture to design a lightweight network structure and introduced a channel attention mechanism. Compared to ERF-Net, SegNet, and DFA-Net, the network model in this paper has a fast segmentation speed and higher segmentation accuracy, with a success rate of 96% and remarkable segmentation results.

Tantalum-incorporated hydroxyapatite coating on titanium implants: its mechanical and in vitro osteogenic properties.

OBJECTIVE: The fabrication of bioactive coatings on metallic implants to enhance osseointegration has become a topic of general interest in orthopedics and dentistry. Hydroxyapatite (HA) coating has been shown to induce bone formation and promote bone-implant integration. Unfortunately, poor mechanical performance has hindered this from becoming a favorable coating material. The majority of present studies have focused in incorporating different elements into HA coatings to improve mechanical properties. In recent years, tantalum (Ta) has received increasing attention due to its excellent biocompatibility and corrosion resistance. The aim of on the present study was to investigate the fabrication and biological performance of Ta-incorporated HA coatings. METHODS: Ta-incorporated HA coatings were fabricated using the plasma spray technique on a titanium substrate, and the surface characteristics and mechanical properties were examined. In addition, the effects of Ta-incorporated HA coatings on the biological behavior of mesenchymal stem cells (BMSCs) were investigated. RESULTS: Ta-incorporated HA coatings with microporous structure had higher roughness and wettability. In addition, the bonding strength of Ta/HA coatings with the substrate was substantially superior to HA coatings. Furthermore, Ta-incorporated HA coatings not only facilitated initial cell adhesion and faster proliferation, but also promoted the osteogenic differentiation of BMSCs. CONCLUSION: These results indicate that the incorporation of Ta could improve mechanical performance and increase the osteogenic activity of HA coatings. The Ta-incorporated HA coating fabricated by plasma spraying is expected to be a promising bio-coating material for metallic implants.

Combination of long-acting HIV fusion inhibitor albuvirtide and LPV/r showed potent efficacy in HIV-1 patients.

BACKGROUND: Long acting antiretroviral drugs represent a promising approach for chronic treatment of HIV infection. Here, we study the efficacy and safety of albuvirtide (ABT), an HIV-1 fusion inhibitor with a half life of 11-12 days in human. METHODS: ABT was evaluated in a 7-week, open-label and randomized trial, combining with LPV/r. Twenty HIV-1-infected adults were assigned to two dose groups, receiving ABT (160 or 320 mg) given weekly and LPV/r given twice daily. RESULTS: At week 7, the decline of HIV-1 RNA from baseline was 1.9 (1.3-2.3) log10 and 2.2 (1.6-2.7) log10 copies/ml, and suppression of HIV-1 RNA to below 50 copies/ml was achieved in 11.1 % (1/9) and 55.6 % (5/9) patients, for the 160 and 320 mg dose group respectively. CONCLUSION: A clear dose-efficacy correlation of ABT was demonstrated. ABT combining with LPV/r is a promising two-drug regimen to be tested in larger patient population.

Effect of Insulin on Bone Formation Ability of Rat Alveolar Bone Marrow Mesenchymal Stem Cells.

The alveolar bone marrow mesenchymal stem cells (ABM-MSCs) play an important role in oral bone healing and regeneration. Insulin is considered to improve impaired oral bones due to local factors, systemic factors and pathological conditions. However, the effect of insulin on bone formation ability of ABM-MSCs still needs to be elucidated. The aim of this study was to determine the responsiveness of rat ABM-MSCs to insulin and to explore the underlying mechanism. We found that insulin promoted ABM-MSCs proliferation in a concentration-dependent manner, in which 10-6 M insulin exerted the most significant effect. 10-6 M insulin significantly promoted the type I collagen (COL-1) synthesis, alkaline phosphatase (ALP) activity, osteocalcin (OCN) expression, and mineralized matrix formation in ABM-MSCs, significantly enhanced the gene and protein expressions of intracellular COL-1, ALP, and OCN. Acute insulin stimulation significantly promoted insulin receptor (IR) phosphorylation, IR substrate-1 (IRS-1) protein expression, and mammalian target of rapamycin (mTOR) phosphorylation, but chronic insulin stimulation decreased these values, while inhibitor NT219 could attenuate these responses. When seeded on ß-tricalcium phosphate (ß-TCP), ABM-MSCs adhered and grew well, during the 28-day culture period, ABM-MSCs+ß-TCP +10-6 M insulin group showed significantly higher extracellular total COL-1 amino-terminus prolongation peptide content, ALP activity, OCN secretion, and Ca and P concentration. When implanted subcutaneously in severe combined immunodeficient mice for 1 month, the ABM-MSCs+ß-TCP +10-6 M insulin group obtained the most bone formation and blood vessels. These results showed that insulin promoted the proliferation and osteogenic differentiation of ABM-MSCs in vitro, and enhance osteogenesis and angiogenesis of ABM-MSCs in vivo. Inhibition studies demonstrated that the insulin-induced osteogenic differentiation of ABM-MSCs was dependent of insulin/mTOR signaling. It suggests that insulin has a direct anabolic effect on ABM-MSCs.

Changes in patient peripheral blood cell microRNAs after total body irradiation during hematopoietic stem cell transplantation.

Background: Ionizing radiation exposure is a great threat to human health. MicroRNAs (miRNAs) have been shown to play an important role in radiation-induced biological effects. Here, we investigated plasma miRNA expression changes and differentially expressed miRNAs in radiotherapy patients exposed to cobalt-60 (60Co) gamma rays to provide an experimental basis for human plasma miRNAs as an estimation indicator for ionizing radiation injury. Methods: Six patients with acute lymphoblastic leukemia (ALL) received continuous 5 gray (Gy) total body irradiation (TBI) twice. At 12 hours after irradiation, miRNA microarray was applied to screen for differentially expressed miRNAs, with some miRNAs confirmed by real-time polymerase chain reaction (RT-PCR) assay. Bioinformatic analysis was carried out to identify the relevant target genes and biological function of the differentially expressed miRNAs. Results: After radiotherapy patients were exposed to 5 Gy gamma radiation, the expression of 9 plasma miRNAs was significantly upregulated, and the expression of 2 miRNAs was downregulated. After irradiation with 10 Gy gamma radiation, the blood plasma of radiotherapy patients contained 18 differentially expressed miRNAs, of which 17 were upregulated and 1 was downregulated (P<0.05). The expression of miR-4532, miR-4634, miR-4655-5p, miR-4763-3p, miR-4785, miR-6087, miR-6850-5p, and miR-6869-5p were significantly upregulated in both the 5-Gy and 10-Gy dose groups, showing a certain dose-response relationship. The RT-PCR results were consistent with the findings of high-throughput sequencing. In addition, the target genes of the differentially expressed miRNAs were mainly involved in RNA transcription and DNA damage. Kyoto Encyclopedia of Genes and Genomes (KEGG) enrichment analysis revealed that these miRNAs participated in phosphoinositide 3-kinase/protein kinase B (PI3K/AKT), Ras, mitogen-activated protein kinase (MAPK), and other signaling pathways. Conclusions: The expression of differential plasma miRNAs of radiotherapy patients was associated with irradiation injury and showed a certain dose-effect relationship. These differentially coexpressed plasma miRNAs could be used as an early indicator for estimating radiation injury.

Application of three-dimensional image reconstruction technology based on high-resolution CT in pyeloplasty.

BACKGROUND: Three-dimensional (3D) image reconstruction technology is widely used in surgical operations for its intuitive visualization. Pyeloplasty requiresprecise cutting and suturing. The reconstruction technology can accurately determine the location and scope of the stenosis at the junction of the renal pelvis and ureter and the relationship with the surrounding vasculature. The purpose of this article is to retrospective evaluate the application value of image reconstruction technology in pyeloplasty based on high-resolution 3D CT images. METHODS: A total of 20 patients with renal pelvic ureteral junction obstruction admitted to our hospital from August 2019 to August 2020 were selected. In this group, left pyeloplasty was performed in 8 patients and right pyeloplasty in 12 patients. In terms of conditions, there was 1 case with secondary pyeloplasty, 6 cases of patients with kidney stones, 2 cases with renal ectopic blood vessels, 1 case with renal prolapse, 1 case with horseshoe kidney, and 1 case with ureteral polyps. There were 12 males and 8 females, with an average age of 34.65±10.67 years and an average body mass index (BMI) of 22.48±3.03 kg/m2. In all patients, 3D CT reconstruction technology was used to guide the formulation of robot-assisted laparoscopic pyeloplasty plans; verify the consistency between the actual operation and the preoperative planning; and observe the operation time, blood loss, postoperative exhaust time, indwelling drainage tube time, and follow-up for comorbidities. RESULTS: The operation was successful in all 20 patients. The actual operation was 100% consistent with the preoperative planning, the operative time was 160.80±63.26 min, the intraoperative blood loss was 47±30.45 mL, the postoperative exhaust time was 1.15±0.37 days, the drainage tube indwelling time was 4.35±1.50 days, and the average follow-up time was 7.95±3.41 months. There were no complications. CONCLUSIONS: Three-dimensional image reconstruction technology based on high-resolution CT has high clinical application value in the treatment of ureteropelvic junction obstruction (UPJO), which simplifies the operation process and shortens the operation time, and is a valuable tool for auxiliary surgeons in devising the operation plan.

Metformin-Induced MicroRNA-34a-3p Downregulation Alleviates Senescence in Human Dental Pulp Stem Cells by Targeting CAB39 through the AMPK/mTOR Signaling Pathway.

Dental pulp stem cells (DPSCs) are ideal seed cells for the regeneration of dental tissues. However, DPSC senescence restricts its clinical applications. Metformin (Met), a common prescription drug for type 2 diabetes, is thought to influence the aging process. This study is aimed at determining the effects of metformin on DPSC senescence. Young and aging DPSCs were isolated from freshly extracted human teeth. Flow cytometry confirmed that DPSCs expressed characteristic surface antigen markers of mesenchymal stem cells (MSCs). Cell Counting Kit-8 (CCK-8) assay showed that a concentration of 100 µM metformin produced the highest increase in the proliferation of DPSCs. Metformin inhibited senescence in DPSCs as evidenced by senescence-associated ß-galactosidase (SA-ß-gal) staining and the expression levels of senescence-associated proteins. Additionally, metformin significantly suppressed microRNA-34a-3p (miR-34a-3p) expression, elevated calcium-binding protein 39 (CAB39) expression, and activated the AMP-activated protein kinase (AMPK)/mammalian target of rapamycin (mTOR) signaling pathway. Dual-luciferase reporter assay confirmed that CAB39 is a direct target for miR-34a-3p. Furthermore, transfection of miR-34a-3p mimics promoted the senescence of DPSCs, while metformin treatment or Lenti-CAB39 transfection inhibited cellular senescence. In conclusion, these results indicated that metformin could alleviate the senescence of DPSCs by downregulating miR-34a-3p and upregulating CAB39 through the AMPK/mTOR signaling pathway. This study elucidates on the inhibitory effect of metformin on DPSC senescence and its potential as a therapeutic target for senescence treatment.

Numerical simulation and analysis of midfacial impacts and traumatic brain injuries.

BACKGROUNDS: The maxillofacial region is the exposed part of the human body and is susceptible to injury due to the limited protective equipment. Due to anatomic proximity of the maxillofacial skeleton and cranium, the force can be transmitted directly to the brain in case of maxillofacial impact, maxillofacial injuries are often accompanied with craniocerebral trauma. Therefore, it is necessary to study the biomechanical response mechanism of trauma to improve prevention of traumatic brain injury (TBI). METHODS: To investigate the biomechanical mechanism between the two injuries, a finite element (FE) head model including skull, midfacial bones and detailed anatomical intracranial features was successfully developed based on CT/MRI data. The model was validated by comparing it with one classical cadaver experiment. During the simulations, three different load forces were used to simulate common causes of injury seen in the clinic including boxing-type impact injury and car accident-type impact injury, and four locations on the model were considered as common injury sites in the midface. RESULTS: Twelve common impact scenarios were reproduced by FE simulation successfully. Simulations showed that there was a linear relationship between the severity of TBI and the collision energy. The location of TBI was directly related to the location of the impact site, and a lateral impact was more injurious to the brain than an anterior-posterior impact. The relative movement between the skull and brain could cause physical damage to the brain. The study indicated that the midfacial bones acted as a structure capable of absorbing energy and protecting the brain from impact. CONCLUSIONS: This biomechanical information may assist surgeons better understand and diagnose brain injuries accompanied by midfacial fractures.

The effects of hyperglycemia on the biological behavior of human gingival fibroblasts on a titanium surface.

BACKGROUND: It is well known that diabetes mellitus is one of the high-risk factors for periodontitis and also for the failure of implant restorations. Usually, the success of an implant restoration depends on both the good osseointegration and the stable soft tissue interface on the implant neck. A good gingival interface of the implant neck is the barrier that enables implant to resist oral microorganisms and the site of initiation of peri-implantitis. This study sought to investigate the effects of hyperglycemia on the attachment and proliferation of human gingival fibroblasts (HGFs) on pure titanium surfaces. METHODS: HGFs were cultured in cell culture mediums with different glucose concentrations (i.e., 5.5, 8. 8, 10, and 15 mmol/L) for 7 d and seeded on pure titanium surfaces. The cells that were seeded on the titanium surfaces had been cultured in cell culture mediums with different glucose concentrations for 3 and 7 d. The attached HGFs on the titanium surfaces were counted for all groups using a blood cell counting plate, and the results were statistically analyzed. The morphologies of the attached HGFs on the titanium surfaces were observed for all the groups using a scanning electronic microscope. RESULTS: As the glucose concentrations increased, the number of attached HGFs on the titanium surfaces decreased. The numbers of attached cells in Groups A and B 7 d after being seeded on the titanium surfaces were more than those 3 d after being seeded (P<0.05). The numbers of attached cells in Groups C and D 3 d after being seeded on the titanium were more than those 7 d after being seeded (P<0.05). The scanning electronic microscope showed that the attached cells in Groups A and B proliferated well, and most cells grew one on top of another. Conversely, the attached cells in Groups C and D proliferated sparsely and the cell morphologies were not good. CONCLUSIONS: The attachment and proliferation of HGFs on pure titanium surfaces were inhibited by increases in glucose concentrations, and the inhibition was further enhanced by the passage of time.

Clinical application and accuracy analysis of 3D printing guide plate based on polylactic acid in mandible reconstruction with fibula flap.

BACKGROUND: Due to the special anatomy morphology and physiological function of the mandible, it has always become a challenge to accurately reconstruct the mandibular defect in maxillofacial surgery. Digital three dimensions (3D) printing surgical guide, as the effective method for individual and accurate surgery, is a hotspot of clinical research at present. In this study, 3D printing PLA surgical guide plate was applied to reconstruct the mandibular defect with fibula flap, its clinical effect and accuracy were evaluated, which aimed to improve the accurate reconstruction of mandibular defects. METHODS: After sterilization, the dimension deformation of the PLA standard specimen were measured. Eighteen patients diagnose with mandibular tumor were collected as observation objects. Then partial mandible resection and simultaneous mandible reconstruction with fibula graft were implemented according to the computer-aided design plan. The clinical effects of 3D printing PLA guide plates application were evaluated by facial contours, occlusal stability and chewing function. Through registering the postoperative computed images reconstruction with preoperative designed shape, the reconstruction accuracy was evaluated by detecting the maximum difference including the distance between lateral convex point of the condyles, the distance between medial convex point of the condyles and the horizontal contained angle between long axis of the condyles. RESULTS: After high temperature steam sterilization, the curvature of the PLA specimen with 100% filling rate and 4.8 mm thickness were the smallest and their dimension deformation had no statistical significance (P>0.05). The minimally deformed 3D printing PLA guide plate were smoothly placed in the right place during the operation. After surgery, the face was symmetrical, the occlusal relationship was restored well and no deviation of the mandibular movement were found. The spiral computed tomography (SCT) scanning showed that the distance between lateral/medial convex points of the condyle and the horizontal contained angle were 128.34±8.68 mm, 88.69±6.75 mm and 145.87°±12.01°. Compared with preoperative design, the maximum deviation of the actual postoperative registration was 1.67±0.63, and the difference was not statistically significant (P>0.05). CONCLUSIONS: The application of 3D printing PLA guide plate in the segmental section and reconstruction of the mandible can effectively simplify the operation, and better reconstruct the continuity of the mandible. The surgical accuracy can fully meet clinical needs with relatively low prices.

Microenvironment Influences on Human Umbilical Cord Mesenchymal Stem Cell-Based Bone Regeneration.

The microenvironment, or niche, regulates stem cell fate and improves differentiation efficiency. Human umbilical cord mesenchymal stem cells (hUC-MSCs) are ideal cell source for bone tissue engineering. However, the role of the microenvironments in hUC-MSC-based bone regeneration is not yet fully understood. This study is aimed at investigating the effects of the in vitro culture microenvironment (hUC-MSCs, nano-hydroxyapatite/collagen/poly (L-lactide) (nHAC/PLA), osteogenic media (OMD), and recombinant human bone morphogenetic protein-7 (rhBMP-7)) and the in vivo transplanted microenvironment (ectopic and orthotopic) on bone regeneration ability of hUC-MSCs. The isolated hUC-MSCs showed self-renewal potential and MSCs' characteristics. In the in vitro two-dimensional culture microenvironment, OMD or OMD with rhBMP-7 significantly enhanced hUC-MSCs' osteocalcin immunofluorescence staining, alkaline phosphatase, and Alizarin red staining; OMD with rhBMP-7 exhibited the highest ALP secretion and mineralized matrix formation. In the in vitro three-dimensional culture microenvironment, nHAC/PLA supported hUC-MSCs' adhesion, proliferation, and differentiation; the microenvironment containing OMD or OMD and rhBMP-7 shortened cell proliferation progression and made osteogenic differentiation progression advance; rhBMP-7 significantly attenuated the inhibiting effect of OMD on hUC-MSCs' proliferation and significantly enhanced the promoting effect of OMD on gene expression and protein secretion of osteogenic differentiation markers, calcium and phosphorous concentration, and mineralized matrix formation. The in vitro three-dimensional culture microenvironment containing OMD and rhBMP-7 induced hUC-MSCs to form the most new bones in ectopic or orthotopic microenvironment as proved by microcomputed tomography and hematoxylin and eosin staining, but bone formation in orthotopic microenvironment was significantly higher than that in ectopic microenvironment. The results indicated that the combination of in vitro hUC-MSCs+nHAC/PLA+OMD+rhBMP-7 microenvironment and in vivo orthotopic microenvironment provided a more optimized niche for bone regeneration of hUC-MSCs. This study elucidates that hUC-MSCs and their local microenvironment, or niche, play an important role in hUC-MSC-based bone regeneration. The endogenously produced BMP may serve an important regulatory role in the process.

[Morphological change analysis based on cone beam CT of the upper airway for obstructive sleep apnea syndrome patients treated with oral appliance in skeletal class ⠡ malocclusion with different vertical patterns].

OBJECTIVE: To analyze the morphological changes in the upper airway of obstructive sleep apnea syndrome (OSAS) patients treated with oral appliance in skeletal class Ⅱ malocclusion with different vertical features by using cone beam CT (CBCT). METHODS: Thirty-six patients diagnosed with OSAS by polysomnography and daytime sleepiness scale and skeletal class Ⅱ malocclusion were treated with oral appliance for 4 months. The changes based on CBCT in the morphology of glossopharyngeal and palatopharyngeal before and after treatment in OSAS patients with different vertical features were compared. RESULTS: After treatment with oral appliance, the glossopharyngeal and palatopharyngeal morphologies of patients with mild OSAS showed significant changes. After treatment with oral appliance, the glossopharyngeal morphology of all patients showed significant changes (P<0.05). The palatopharyngeal morphology of patients in the lower and average groups also exhibited significant changes (P<0.05). Sagittal changes in the glossopharyngeal measurements of high-angle patients demonstrated significant difference, whereas the other measured values showed no significant difference. CONCLUSIONS: The morphological changes in the upper airway were significant in OSAS patients with lower and average vertical patterns when treated with oral appliance, but the changes in high vertical patterns were not significant.

The effectiveness of adjustable oral appliance for older adult patients with obstructive sleep apnea syndrome.

BACKGROUND: Oral appliance (OA) treatment for obstructive sleep apnea syndrome (OSAS) has attracted more and more attention due to its low price, comfort, portable and non-invasion. This study aimed to investigate the clinical effectiveness of adjustable oral appliance on older adult patients with OSAS. METHODS: Thirty older adult patients diagnosed with OSAS were chosen as the study participants and received an adjustable OA for 6 months. Then, the patients were subjected to a polysomnographic examination, Berlin Questionnaire (BQ) scale questionnaire, and cone beam computer tomography (CBCT) analytical measurement to evaluate their symptom improvement and the morphologic changes of the upper airway. RESULTS: After treatment with adjustable oral appliance for six months, the results showed that there was an improvement of different degrees in the subjective symptoms. Apnea hypopnea index (AHI) had decreased from (27.65±1.31) per hour to (6.74±0.75) per hour (P<0.05); the maximum apnea time (MAT) had decreased from 43.82±2.69 to 21.37±3.18 s (P<0.05); the average oxygen saturation (MSaO2) had increased from (89.24±7.27)% to (92.69±4.46)%; the lowest oxygen saturation (LSaO2) from (81.85±8.31)% to (86.93±4.45)%. Moreover, the CBCT scanning analysis showed that the minimal sagittal diameter, sectional area, and the volume of the palatopharynx, as well as the sagittal diameter and volume of the glossopharynx significantly increased. CONCLUSIONS: The adjustable OA had considerable clinical efficacy and comfort in older adult OSAS patients by enlarging the palatopharynx and glossopharynx.

Antibacterial peptides inhibit MC3T3-E1 cells apoptosis induced by TNF-α through p38 MAPK pathway.

BACKGROUND: Antimicrobial peptides (AMP), as a small molecular polypeptide with a broad antibacterial spectrum and high efficiency, have attracted more and more attention. Few pieces of research on the effect of the antimicrobial peptide on osteoblast under inflammatory conditions have so far been reported. The main aim of this work was to investigate the antiapoptosis effect of the antimicrobial peptide on MC3T3-E1 cells induced by TNF-α and its related mechanism. METHODS: Rat MC3T3-E1 cells were co-cultured with different concentrations of antibacterial peptide DP7 and TNF-α.MTS assay, cell scratch test, alkaline phosphatase activity, and alizarin red staining assay were used to determine osteoblast viability in this experiment. Annexin V-FITC/PI double staining cells and flow cytometry were used to analyze apoptosis and Western blot assay detection to show mitogen-activated protein kinase (MAPK) protein expression in rat MC3T3-E1 cells. Then, Realtime polymerase chain reaction (PCR) was used to examine the caspase-3 gene expression. Also, ELISA detection was used to clarify the anti-apoptotic effect of the p38 MAPK inhibitor, SB203580, on cells' apoptosis. RESULTS: Antimicrobial peptide could promote the proliferation, migration, and osteogenic ability of MC3T3-E1 cells induced by TNF-α, but inhibit cell apoptosis rate (P<0.05), and the effect was concentration-dependent. Western blot results showed after TNF-αtreatment, the expression of p-p38 MAPK in the MC3T3-E1 cells increased after TNF-α and antimicrobial peptide cotreatment, TNF-α induced p-p38 MAPK phosphorylation was inhibited, and the difference was statistically significant (P<0.05). Realtime PCR results showed that the gene expression of caspase-3 mRNA was up-regulated after TNF-α treatment, while their expression was down-regulated after cultured with TNF-α and antimicrobial peptide. Elisa's analysis showed that cell apoptosis increased after TNF-α treatment alone, and cell apoptosis was reduced to the normal levels when combined with antimicrobial peptide, and cell apoptosis induced by TNF-α was partially abolished when combined with SB203580. CONCLUSIONS: Antimicrobial peptide DP7 could inhibit MC3T3-E1 cells apoptosis induced by TNF-α, and the effect was concentration-dependent. The antiapoptosis activation of the antimicrobial peptide on MC3TE-E1 cells may be related to the inhibition of the p38 MAPK pathway.

High IFITM3 expression predicts adverse prognosis in acute myeloid leukemia.

Acute myeloid leukemia (AML) is a malignancy caused by the uncontrolled and dysregulated clonal expansion of abnormal myeloid primordial cells. In general, the prognosis of AML remains poor despite new discoveries in its pathogenesis and treatment. It is crucial to find early and sensitive biomarkers and continue to explore active targeted treatments. Interferon-induced transmembrane protein (IFITM) family is an important part of the interferon signaling pathway and participate in the regulation of immune cell signaling, adhesion, cancer, and liver cell migration. However, the clinical and prognostic value of the IFITM family in AML has rarely been studied. We screened The Cancer Genome Atlas database and found 155 AML patients with IFITM family (IFITM1-5) expression data. In patients who only received chemotherapy, those with high IFITM3 expression had significantly shorter event-free survival (EFS) and overall survival (OS) than patients with low expression (all P < 0.05). Multivariate analysis demonstrated that high IFITM3 expression was an independent risk factor for EFS and OS in patients only received chemotherapy (all P < 0.05). In patients who underwent allogeneic hematopoietic stem cell transplantation (allo-HSCT), however, all IFITM members had no impact on either EFS or OS. In conclusion, our study elucidated that high IFITM3 expression could be an adverse prognostic factor for AML, whose effect might be overcome by allo-HSCT.

Comparison of radiologic characteristics and pathological presentations of primary pulmonary lymphoma in 22 patients.

OBJECTIVE: This study was performed to compare the radiologic characteristics and pathological presentations of primary pulmonary lymphoma (PPL), explore the possible mechanism underlying its development, summarize its radiologic characteristics, and improve the accuracy of its diagnosis. METHODS: The medical records of 22 patients pathologically diagnosed with PPL were retrospectively analyzed. RESULTS: Chest computed tomography (CT) demonstrated single or multiple nodules and masses in the lungs, patchy opacities or consolidation along the bronchovascular bundle, and no significantly enlarged mediastinal or hilar lymph nodes. All 22 cases of PPL were classified as non-Hodgkin's lymphoma (NHL) by transbronchial biopsy, CT-guided needle biopsy, and postoperative pathology. Most (16 cases) were marginal-zone B-cell lymphomas of mucosa-associated lymphoid tissue (MALT). Twelve patients had air bronchograms within the lesion, and 13 showed ill-defined lesions with ground-glass brush-like changes. CONCLUSION: PPL is a rare lung tumor, and most are classified as MALT lymphoma, a subtype of NHL. Chest CT can help to diagnose this disease. Positron emission tomography (PET)/CT is of great clinical value for evaluation of the lesion and patient's general condition. The possibility of PPL should be considered in patients with characteristic CT and PET/CT findings and mild clinical symptoms, and early treatment should be administered.

Efficacy and safety of the long-acting fusion inhibitor albuvirtide in antiretroviral-experienced adults with human immunodeficiency virus-1: interim analysis of the randomized, controlled, phase 3, non-inferiority TALENT study.

BACKGROUND: Albuvirtide is a once-weekly injectable human immunodeficiency virus (HIV)-1 fusion inhibitor. We present interim data for a phase 3 trial assessing the safety and efficacy of albuvirtide plus lopinavir-ritonavir in HIV-1-infected adults already treated with antiretroviral drugs. METHODS: We carried out a 48-week, randomized, controlled, open-label non-inferiority trial at 12 sites in China. Adults on the World Health Organization (WHO)-recommended first-line treatment for >6 months with a plasma viral load >1000 copies/mL were enrolled and randomly assigned (1:1) to receive albuvirtide (once weekly) plus ritonavir-boosted lopinavir (ABT group) or the WHO-recommended second-line treatment (NRTI group). The primary endpoint was the proportion of patients with a plasma viral load below 50 copies/mL at 48 weeks. Non-inferiority was prespecified with a margin of 12%. RESULTS: At the time of analysis, week 24 data were available for 83 and 92 patients, and week 48 data were available for 46 and 50 patients in the albuvirtide and NRTI groups, respectively. At 48 weeks, 80.4% of patients in the ABT group and 66.0% of those in the NRTI group had HIV-1 RNA levels below 50 copies/mL, meeting the criteria for non-inferiority. For the per-protocol population, the superiority of albuvirtide over NRTI was demonstrated. The frequency of grade 3 to 4 adverse events was similar in the two groups; the most common adverse events were diarrhea, upper respiratory tract infections, and grade 3 to 4 increases in triglyceride concentration. Renal function was significantly more impaired at 12 weeks in the patients of the NRTI group who received tenofovir disoproxil fumarate than in those of the ABT group. CONCLUSIONS: The TALENT study is the first phase 3 trial of an injectable long-acting HIV drug. This interim analysis indicates that once-weekly albuvirtide in combination with ritonavir-boosted lopinavir is well tolerated and non-inferior to the WHO-recommended second-line regimen in patients with first-line treatment failure. TRIAL REGISTRATION: ClinicalTrials.gov Identifier: NCT02369965; https://www.clinicaltrials.gov.Chinese Clinical Trial Registry No. ChiCTR-TRC-14004276; http://www.chictr.org.cn/enindex.aspx.

Degradation in vitro and in vivo of ß-TCP/MCPM-based premixed calcium phosphate cement.

Premixed calcium phosphate cements (CPCs) have been developed to shorten the surgical time of conventional CPCs. However, there is lack of investigation on degradation behavior of premixed CPCs in vitro and in vivo. In this study, the premixed CPCs are prepared by mixing glycerol or polyethylene glycol (PEG) with the CPC power (ß-tricalcium phosphate (ß-TCP) and monocalcium phosphate monohydrate (MCPM)), and their degradation performances including the microstructure, chemical composition and mechanical properties are systematically evaluated both in vitro and in vivo (subcutaneous implantations in rabbits). When the premixed CPCs aged in PBS or FBS, results show weight loss of the specimens, decreased pH value and increased calcium ion concentration of aging media. Meanwhile, the setting products convert from dicalcium phosphate dihydrate (DCPD) to dicalcium phosphate anhydrous (DCPA), and no hydroxyapatite deposit. The specimen size and the molecular weight of non-aqueous solvent can modulate the setting product of premixed CPCs. For the larger specimens, DCPA is the main setting product, for the smaller ones, the composite contained DCPD and DCPA. With the decrease of the molecular weight of the non-aqueous solvent PEG, the setting product change from both DCPD and DCPA to DCPA due to the quicker exchange rate of PEG with water. After a period of subcutaneous implantation, the surface of the grafts obviously disintegrated with the formation of porous structures, but their internal morphology do not obviously change.