An Integrated Framework for Data Quality Fusion in Embedded Sensor Systems.

The advancement of embedded sensor systems allowed the monitoring of complex processes based on connected devices. As more and more data are produced by these sensor systems, and as the data are used in increasingly vital areas of applications, it is of growing importance to also track the data quality of these systems. We propose a framework to fuse sensor data streams and associated data quality attributes into a single meaningful and interpretable value that represents the current underlying data quality. Based on the definition of data quality attributes and metrics to determine real-valued figures representing the quality of the attributes, the fusion algorithms are engineered. Methods based on maximum likelihood estimation (MLE) and fuzzy logic are used to perform data quality fusion by utilizing domain knowledge and sensor measurements. Two data sets are used to verify the proposed fusion framework. First, the methods are applied to a proprietary data set targeting sample rate inaccuracies of a micro-electro-mechanical system (MEMS) accelerometer and second, to the publicly available Intel Lab Data set. The algorithms are verified against their expected behavior based on data exploration and correlation analysis. We prove that both fusion approaches are capable of detecting data quality issues and providing an interpretable data quality indicator.

A Smart Capacitive Sensor Skin with Embedded Data Quality Indication for Enhanced Safety in Human-Robot Interaction.

Smart sensors are an integral part of the Fourth Industrial Revolution and are widely used to add safety measures to human-robot interaction applications. With the advancement of machine learning methods in resource-constrained environments, smart sensor systems have become increasingly powerful. As more data-driven approaches are deployed on the sensors, it is of growing importance to monitor data quality at all times of system operation. We introduce a smart capacitive sensor system with an embedded data quality monitoring algorithm to enhance the safety of human-robot interaction scenarios. The smart capacitive skin sensor is capable of detecting the distance and angle of objects nearby by utilizing consumer-grade sensor electronics. To further acknowledge the safety aspect of the sensor, a dedicated layer to monitor data quality in real-time is added to the embedded software of the sensor. Two learning algorithms are used to implement the sensor functionality: (1) a fully connected neural network to infer the position and angle of objects nearby and (2) a one-class SVM to account for the data quality assessment based on out-of-distribution detection. We show that the sensor performs well under normal operating conditions within a range of 200 mm and also detects abnormal operating conditions in terms of poor data quality successfully. A mean absolute distance error of 11.6mm was achieved without data quality indication. The overall performance of the sensor system could be further improved to 7.5mm by monitoring the data quality, adding an additional layer of safety for human-robot interaction.

23G pars plana vitrectomy for vitreal floaters: prospective assessment of subjective self-reported visual impairment and surgery-related risks during the course of treatment.

PURPOSE: Quantifying the subjective impairment due to floaters based on an indication-specific questionnaire and setting its change between prior to and 3/12 months after elective vitrectomy in relation to surgical risks. METHODS: Single-arm longitudinal observational multicenter study. Sixty-four floater patients underwent 23G pars plana vitrectomy; simultaneous phacoemulsification was excluded. An overall self-rated impairment index (SRI) and sub-indices SRI were calculated on the basis of a modified Visual Quality of Life questionnaire (VQoL), which addresses general vision, glare, near-sight problems and mobility of floaters. SRI ranged from 0 to 100% (maximum impairment). Secondary endpoints included corrected visual acuity and complications. RESULTS: Data were collected prior to and 3 (n = 64) and 12 (n = 62) months after surgery. The median overall SRI improved (44, 12, 11%) with a statistically significant median reduction of 69% (95% confidence interval 50-89%) 3 months postop. The median sub-SRIs improved for glare (50, 17, 17%), near sight problems (50, 17, 8%), and mobility of floaters (43, 5, 0%). Sixteen eyes needed cataract surgery during follow-up (10 showed cataract already prior to vitrectomy). Eight complications were reported (6 intra-operative retinal holes, 2 post-operative retinal detachments). CONCLUSION: For the majority of floater patients, subjective impairment was profoundly reduced by vitrectomy. Benefits of surgery prevailed despite complications.

Retention of bonded titanium copings fixed to implant abutments.

STATEMENT OF PROBLEM: Conical abutments can be laser welded to the abutment base to compensate for differing implant axes. As laser welding requires expensive equipment, alternative methods for bonding the conical abutment part with the abutment base should be considered. PURPOSE: The purpose of this in vitro study was to evaluate the retention of Ti-6Al-7Nb copings bonded adhesively to Ti-6Al-7Nb abutments and to compare it with the stability achieved by laser welding. MATERIAL AND METHODS: A total of 104 two-part Ti-6Al-7Nb specimens were prepared and divided into 13 groups with 8 specimens each. In this 2-part study, 3 luting resins (Panavia F 2.0 [PF]; Multilink Automix [MA]; Superbond C&B [SB]) were used with or without metal priming (PR). The laser welding group (LW) served as the control. After storage for 1 or 150 days (150 days with thermal cycling [TC]), push-out retention and welded joint stability were tested. The data were analyzed with ANOVA and the Tukey HSD multiple comparison tests. RESULTS: The choice of resin, thermal cycling, and metal priming had a significant effect on resin push-out retention. LW provided the strongest retention, followed by PF, MA, and SB. For PF and SB, TC decreased retention. PR did not lead to higher retention but provided better bonding stability when TC was applied. CONCLUSIONS: The retention values suggest that considering the maximum mastication forces, resin bonding is an appropriate substitute for the laser welding method.

Effect of clasp design on retention at different intervals using different abutment materials and in a simulated oral condition.

PURPOSE: The purpose of this study was to compare the retention of circlet (E) clasps and back-action clasps against three abutment surface materials during long-term simulation of attachment and detachment. MATERIAL AND METHODS: Forty-eight test models were constructed by placing premolars (natural abutments or metal dies) inside metal blocks to test different abutment retention surface materials (sound enamel, composite resin, and glass-ceramic; 16 each). The models were duplicated into investment models for construction of circlet (E) and back-action clasps. Removal and insertion cycling of clasps was carried out for 250, 500, 1000, 2000, 4000, 8000, and 16,000 cycles. The retention of each clasp was measured before cycling and after each interval. Data were analyzed using 1-way-ANOVA, 2-way-ANOVA, and Mann-Whitney U tests. RESULTS: No significant differences in retention of either clasp were found between the three abutment material surfaces; however, there was a significant decrease in retention force of the circlet (E) clasp between 1000 and 2000 cycles but not of the back-action clasp. CONCLUSIONS: (1) The back-action clasp maintains its retention force for a longer period than the circlet (E) clasp. (2) Composite resin contouring of teeth provided retention comparable to enamel and a ceramic material.

Effects of long-term simulated RPD clasp attachment/detachment on retention loss and wear for two clasp types and three abutment material surfaces.

PURPOSE: The purpose of this in vitro study was to measure the loss of retention and wear of two clasp types (E-circlet, back action) against three abutment materials (enamel, composite, CAD/CAM ceramic) after 16,000 simulated cycles of attachment-detachment. MATERIALS AND METHODS: Forty-eight models were constructed by placing either an upper first premolar or a metal die inside a metal rectangular block. Models were divided according to the abutment teeth into three groups. Group E consisted of 16 unrestored human premolars with sound enamel. Group R had 16 premolars recontoured buccally using composite resin. Group C had 16 metal dies (duplicated from a human premolar) covered by CAD/CAM all-ceramic crowns. On the models, E-circlet (E) and back-action (B) clasps were constructed to engage the model's teeth. Withdrawal and insertion cycling of clasps was carried out for 16,000 cycles by using a chewing simulator. The retention force of each clasp was measured after cycling. An acrylic replica was made for each abutment retention surface before and after cycling. Each replica was examined by SEM, and the wear areas were measured. The data were analyzed statistically using one-way ANOVA, two-way ANOVA, and Mann-Whitney tests. RESULTS: There was no significant retention loss after 16,000 cycles (p≥ 0.05) of both clasps (E, B) on the three abutment materials (E, R, C). The mean of wear areas in mm(2) were 1.83 ± 0.36, 0.85 ± 0.66, 2.37 ± 1.88, 1.7 ± 1.11, 0.6 ± 0.2, and 0.06 ± 0 for EE, BE, ER, BR, EC, and BC, respectively. There were significant differences among the wear areas of the abutment surface of the six subgroups (p≤ 0.05). CONCLUSION: The composite resin contoured surfaces showed more wear than the enamel and ceramic surfaces. E-clasps caused more wear on the abutment materials than back-action clasps.

[Phacovitrectomy-Influence of the timing of intraocular lens implantation on the corneal endothelium]. / Phakovitrektomie ­ Einfluss des Zeitpunktes der Kunstlinsenimplantation auf das korneale Endothel.

BACKGROUND AND PURPOSE: In phacovitrectomy the cataract is usually operated on first including implantation of the intraocular lens (IOL) before beginning vitrectomy but the IOL can also be implanted following vitrectomy. This variation avoids optical impairments from corneal opacities and the lens rim, improves the visualization of the retina during surgery and might thereby reduce intraoperative complications, such as peripheral retinal tears or IOL subluxation. It might, however, increase stress on the corneal endothelium. The aim of this study was, therefore, to compare postoperative corneal endothelial cell loss for the standard procedure of phacovitrectomy and the surgical variation. METHODS: In this retrospective study 41 eyes were each assigned to group I (standard phacovitrectomy) or group II (variation of phacovitrectomy). The primary endpoint was the absolute and relative corneal endothelial cell loss appearing 5 ± 1 weeks postoperatively with reference to the preoperative number of endothelial cells. Secondary endpoints included visual acuity, intraocular pressure, coefficient of variation of endothelial cell area (CV), proportion of hexagonal endothelial cell forms (6A), pachymetry, intraoperative and postoperative complications. RESULTS: The absolute and relative endothelial cell loss in group I (-108 ± 146; -4.1 ± 5.7%) did not differ significantly from that in group II (-73 ± 122; -3.1 ± 5.3%, p = 0.299; p = 0.388). The secondary endpoints also showed no significant differences. CONCLUSION: The presented variation of phacovitrectomy expands the surgical options and does not show a significantly different postoperative corneal endothelial cell loss compared to the standard procedure.

Load-bearing capacity of all-ceramic posterior inlay-retained fixed dental prostheses.

The purpose of this in vitro study was to compare the quasi-static load-bearing capacity of all-ceramic resin-bonded three-unit inlay-retained fixed dental prostheses (IRFDPs) made from computer-aided design/computer-aided manufacturing (CAD/CAM)-manufactured yttria-stabilized tetragonal zirconia polycrystals (Y-TZP) frameworks with two different connector dimensions, with and without fatigue loading. Twelve IRFDPs each were made with connector dimensions 3 x 3 mm(2) (width x height) (control group) and 3 x 2 mm(2) (test group). Inlay-retained fixed dental prostheses were adhesively cemented on identical metal-models using composite resin cement. Subgroups of six specimens each were fatigued with maximal 1,200,000 loading cycles in a chewing simulator with a weight load of 25 kg and a load frequency of 1.5 Hz. The load-bearing capacity was tested in a universal testing machine for IRFDPs without fatigue loading and for IRFDPs that had not already fractured during fatigue loading. During fatigue testing one IRFDP (17%) of the test group failed. Under both loading conditions, IRFDPs of the control group exhibited statistically significantly higher load-bearing capacities than the test group. Fatigue loading reduced the load-bearing capacity in both groups. Considering the maximum chewing forces in the molar region, it seems possible to use zirconia ceramic as a core material for IRFDPs with a minimum connector dimension of 9 mm(2). A further reduction of the connector dimensions to 6 mm(2) results in a significant reduction of the load-bearing capacity.

Implant-abutment interface design affects fatigue and fracture strength of implants.

OBJECTIVES: Failures of implant-abutment connections are relatively frequent clinical problems. The aim of this study was to evaluate the influence of long-term dynamic loading on the fracture strength of different implant-abutment connections. MATERIAL AND METHODS: Six implant systems were tested: two systems with external connections (Brånemark, Compress) and four systems with internal connections (Frialit-2, Replace-Select, Camlog, Screw-Vent). Fracture strength was tested in two subgroups for each system: one subgroup with (dyn) and the other without prior dynamic loading (contr). Each subgroup consisted of eight specimens with standard implant-abutment combinations for single molar crowns. Dynamic loading was performed in a two-axis chewing simulator with 1,200,000 load cycles at 120 N. RESULTS: Median fracture strengths in Newton (N) and 25th and 75th percentiles [in brackets] were: Brånemark: dyn=729 [0;802]/contr=782 [771;811], Frialit-2: dyn=0 [0;611]/contr=887 [798;941], Replace-Select: dyn=1439 [1403;1465]/contr=1542 [1466;1623], Camlog: dyn=1482 [1394;1544]/contr=1467 [1394;1598], Screw-Vent: dyn=0 [0;526]/contr=780 [762;847] and Compress: dyn=818[0;917]/contr=1008 [983;1028]. In some dyn subgroups, failures of the implant-abutment connection occurred already during dynamic loading: three specimens of the Brånemark and Compress groups and six specimens of the Screw-Vent and the Frialit-2 groups failed during dynamic loading. Statistically significant differences (P< or =0.05) in fracture strength could be found between groups with different connection designs. CONCLUSION: Implant systems with long internal tube-in-tube connections and cam-slot fixation showed advantages with regard to longevity and fracture strength compared with systems with shorter internal or external connection designs.

Marginal and internal fit of metal-ceramic crowns fabricated with a new laser melting technology.

OBJECTIVES: The purpose of this in vivo investigation was to evaluate the marginal and internal fit of metal-ceramic crowns fabricated with a new laser melting procedure (BEGO Medical, Bremen, Germany), and to investigate the influence of ceramic firing on the marginal and internal accuracy of these crowns. METHODS: After tooth preparation, impression taking using polyvinylsiloxane and model casting, each preparation was contact less scanned by strip-light-projection. The finishing line and the virtual construction of the metal coping were defined by means of a computer. Using CAD/CAM software the metal copings were produced by BEGO Medical (Germany). A base metal alloy (Wirobond C) and a precious alloy (BioPontoStar, both: BEGO Medical) were used in this study with 14 restorations each. The internal and marginal accuracy of the specimens were examined using a silicone indicator paste (Fit Checker, GC, Japan). After setting, the silicone films were embedded in acrylic resin and sectioned four times. Each slice was photographed digitally at 60x magnification for marginal and at 15x magnification for occlusal adaptation, respectively. Using a light microscope the thickness of the silicone layer was measured at 10 reference points, a total of 3360 measurements. This procedure was repeated after the ceramic firing in the dental laboratory and after intraoral adjustment clinically. RESULTS: No statistically significant differences between the two alloys were found at any time. The mean marginal discrepancies ranged from 74 to 99 microm for both alloys. The internal gaps ranged from 250 to 350 microm. Ceramic firing increased the marginal discrepancies while the internal gaps decreased especially at occlusal surface. However, only in one case a slight statistically significance could be determined (p=0.046). SIGNIFICANCE: The results of this in vivo study show that crowns produced with laser melting technology exhibit a marginal and internal accuracy that is comparable to conventional production procedures.

Two-body wear of resin and ceramic denture teeth in comparison to human enamel.

OBJECTIVES: To evaluate the two-body wear resistance of different artificial denture teeth when opposed to steatite ceramic balls in a dual-axis chewing simulator. METHODS: Artificial denture teeth including the ceramic tooth Bonartic CT, the composite resin tooth Condyloform II NFC, the acrylic resin teeth Bonartic TCR, Orthognath, Polystar Selection, SR Orthotyp DCL, and Vitapan Cuspiform, and human maxillary premolars were tested in a chewing simulator. Wear resistance was analyzed measuring vertical substance loss and volume loss using profilometry and an optical macroscope after various chewing cycles (49N, up to 1,200,000 cycles). Data were statistically analyzed using one-way analysis of variance (ANOVA) followed by the Fisher test (LSD) at p< or =0.05. RESULTS: After 1,200,000 chewing cycles the mean vertical substance loss and volume loss for the composite resin teeth (117microm and 0.144mm3) were significantly lower than for all acrylic resin teeth (149-166microm and 0.220-0.292mm3) (p< or =0.05), but higher than for ceramic teeth (36microm and 0.029mm3) and for enamel (56microm and 0.033mm3) (p< or =0.05). No significant differences were found among the acrylic resin teeth for both parameters (p>0.05). SIGNIFICANCE: The composite resin showed improved in vitro two-body wear resistance compared to modern acrylic resin denture teeth; however, it showed less wear resistance than ceramic teeth and human enamel. Ceramic teeth should be preferred over natural teeth when occlusal stability is considered a high priority.

Influence of contamination on bonding to zirconia ceramic.

The purpose of this study was to investigate the influences of contaminations and cleaning methods on bonding to dental zirconia ceramic. After saliva immersion and using silicone disclosing agent, airborne-particle abraded ceramic specimens were cleaned with isopropanol (AL), acetone (AC), 37% phosphoric acid (PA), additional airborne-particle abrasion (AA), or only with water rinsing (SS). Airborne-particle abraded specimens without contaminations (CL) were used as control group. For chemical analysis specimens of all groups were examined with X-ray photoelectron spectroscopy (XPS). Plexiglas tubes filled with composite resin were bonded to ceramic specimens using a phosphate-monomer containing composite luting resin. After 3-day water storage, tensile bond strengths (TBS) were tested. XPS analysis of group SS showed the presence of saliva and silicone (Si) contamination on the surface. The ratios of carbon/zirconium and oxygen/zirconium for groups PA and AA were comparable to those ratios obtained for group CL, indicating the removal of the organic saliva contamination. Airborne-particle abrasion and acetone completely removed Si contamination from ceramic surfaces. Isopropanol had little cleaning effect on the two contaminants. TBS (median +/- standard deviation) in MPa of the groups SS (11.6 +/- 3.1), AL (10.0 +/- 2.9), and AC (13.0 +/- 2.8) were statistically lower than those of groups PA (33.6 +/- 5.5), AA (40.1 +/- 3.6), and CL (47.0 +/- 8.1) (p < 0.001), while no differences were found in TBS between groups AA and CL (p > 0.5). Contamination significantly reduced bond strengths to zirconia ceramic. Airborne-particle abrasion was the most effective cleaning method.

Wear of composite resin veneering materials and enamel in a chewing simulator.

OBJECTIVES: The purpose of this in vitro study was to evaluate the wear of six composite resins for the veneering of crowns compared with the wear of human and bovine enamel, tested in a dual-axis chewing simulator. METHODS: Eight specimens of six different composite resins (Targis I+II, Solidex, BelleglassHP, Estenia, Solidex) and of human and bovine enamel were prepared. Steatite ceramic balls served as antagonistic specimens. Specimens were dynamically loaded in a dual-axis chewing simulator with 49 N up to 1,200,000 loading cycles with additional thermal cycling between 5 and 55 degrees C. After 120,000, 240,000, 480,000, 840,000 and 1,200,000 loading cycles, an impression of the specimens' surface and the antagonistic specimen was taken using a polyvinylsiloxane impression material. The substance loss at the surface was measured with computer-aided laser profilometry. Data were analyzed using ANOVA and the Tukey test. RESULTS: The wear of the ultra fine compact filled composite resins Solidex and BelleglassHP was not statistically significantly different from that of human enamel. The other composite resins and bovine enamel showed a wear statistically significantly higher than human enamel. SIGNIFICANCE: Comparing six composite resins for the veneering of crowns, ultra fine compact filled composite resins BelleGlassHP and Solidex showed a wear not significantly different from the wear of human and bovine enamel.

Resistance to fracture and structural characteristics of different fiber reinforced post systems.

OBJECTIVES: The aim of this study was to investigate the ultrastructure and resistance to fracture of eight different types of fiber post, and to verify the existence of a correlation between structural characteristics and flexural strength. METHODS: Eight types of fiber post were selected for this study. Fiber Kor (Jeneric-Pentron), Para Post Fiber White (Colténe), Luscent Anchor (Dentatus), Twin-Luscent Anchor (Dentatus), Style Post (Metalor), DT White-Post (VDW), DT Light-Post (VDW) and ER Dentin Post (Brasseler). Ten posts of each experimental group were selected for a three-point bending test, and one was processed for SEM evaluation. A universal testing machine loading at an angle of 90 degrees was employed for the three-point bending test. The test was carried out until fracturing of the post. After fracture testing, the posts with the highest and the lowest values of flexural strength of each system were additionally processed for SEM analysis. SEM evaluation was performed using a PC-measurement program to assess the fiber/matrix ratio and fiber dimensions. RESULTS: The fracture load of the tested systems ranged from 60 to 96 N and the flexural strength from 565 to 898 MPa. DT White-Post and DT Light-Post (898 and 842 MPa, respectively) had significantly higher flexural strengths than the other posts. Style Post (565 MPa) showed a significantly lower flexural strength than all other posts. The differences in fiber diameter ranged from 8.2 to 21 microm and for the fiber/matrix ratio from 41 to 76%. Of the various structural characteristics investigated, only the fiber/matrix ratio showed a significant correlation to the flexural strength (r=0.922, p=0.003). SIGNIFICANCE: The FRC-posts investigated displayed significant differences with regard to fracture load and flexural strength. A strong and significant linear correlation between the fiber/matrix ratio and the flexural strength was found.

Fracture strength of all-ceramic posterior inlay-retained fixed partial dentures.

OBJECTIVES: The purpose of this in vitro study was to compare the quasi-static (QSFS) and fatigue fracture strength of all-ceramic resin-bonded three unit inlay-retained fixed partial dentures (IRFPDs) made from a heat-pressed lithium-disilicate based glass-ceramic (LDGC) and a CAD/CAM-manufactured yttrium-oxide partially stabilized zirconia framework (YPSZ). METHODS: Identical IRFPD-models of the maxilla were used. They consisted of a second premolar, a missing first molar and a second molar (Co-Cr-Mo alloy) integrated in a low melting alloy base. Roots were covered with a soft silicone-layer to simulate an artificial parodontium. Premolars had an occlusal-distal inlay-preparation and molars a mesial-occlusal inlay-preparation. Thirty-two IRFPDs were made from each ceramic using two different connector dimensions: 3mmx3mm (LDGC_9, YPSZ_9); 4mmx4mm (LDGC_16, YPSZ_16). All IRFPDs were cemented adhesively to the IRFPD-models, using composite resin cement. QSFS was tested in a universal-testing-machine (UTM) for six specimens. The other specimens were fatigued either with cyclic loading at 250N (n=4) in a chewing simulator or at 600N (n=6) using the UTM, and group YPSZ additionally at 1500N. RESULTS: The medians of QSFS (N) were 960 (LDGC_9), 1316 (LDGC_16), 3180 (YPSZ_9) and 3120 (YPSZ_16). For both QSFS and cyclic loading significant differences were found between LDGC_9 and LDGC_16 (p0.05). Differences between LDGC and YPSZ were significant for both connector sizes (p

The mechanical integrity of in vivo engineered heterotopic bone.

Recent advances in tissue engineering have aroused interest in growth of heterotopic bone for the repair of skeletal defects. This study demonstrates an in vivo method in minipigs of engineering individual human-sized mandible replacements of heterotopic bone with a mechanical integrity similar to natural bone. Ten individualized mandible replacement scaffolds were created using computer-aided design (CAD) techniques. Five had a resorbable external scaffold made of polylactite mesh (test group 1) and five had had a non-resorbable external scaffold of titanium mesh (test group 2). The mesh scaffolds were loaded each with five BioOss blocks serving as internal scaffolds and 3.5 mg recombinant human Bone Morphogenetic Protein-7. The loaded mesh scaffolds were implanted into the latissimus dorsi muscles of five infant minipigs. After 6 weeks the mandible replacements were harvested. Core biopsy cylinders were taken from the replacements of both test groups and from the natural pig mandibles (control 1). Also, core biopsies from plain BioOss Blocks were gained (control 2). The core biopsy cylinders were loaded axially into a compression test device to evaluate the mechanical compression resistance. Additional specimen underwent histological examination. Both test groups resulted in successful bone induction with degrees of compression resistance [Test 1: 1.62 MPa (SD+/-0.73); Test 2: 1.51 MPa (SD+/-0.56)] statistically insignificant when compared to natural porcine mandibular bone [1.75 MPa (SD+/-0.69)]. This differed significantly from the much lower compression resistance seen in the unadulterated BioOss [0.92 MPa (SD+/-0.04)]. Following this, the in vivo engineered bone has a similar mechanical compression stability as natural bone.

Micro-tensile bond strength of three luting resins to human regional dentin.

OBJECTIVES: To evaluate the micro-tensile bonding strength (muTBS) of three luting resins to human regional dentin. METHODS: Dentin disks from non-carious third molars were prepared from different regions (s, superficial dentin; d, deep dentin; c, cervical dentin), and divided into groups based on anatomical locations and luting resins (Super-Bond C&B: SB; Panavia F 2.0: PF; RelyX Unicem: RU): SB-s, SB-d, SB-c; PF-s, PF-d, PF-c; RU-s, RU-d, RU-c. Luting resins were used according to the manufacturers' instructions, to bond 1-mm-diameter PMMA or composite rods to the exposed dentin specimens under a load of 7.5 N, in the self-curing mode. After storage for 1 or 3 days, muTBS was tested at a cross-head speed of 1mm/min. Data were analyzed with ANOVA and Fisher's PLSD test. The bonding interface and fractography analyses were performed with SEM and TEM. RESULTS: ANOVA results showed that muTBS to superficial dentin was significantly higher than to deep or cervical dentin for all three luting resins. SB-s and PF-s, with the highest muTBS, failed primarily cohesively in luting resin. muTBS of SB-d and SB-c were significantly higher than those of PF and RU. RU, with the lowest regional muTBS, failed mostly within demineralized dentin. SEM and TEM showed that adhesive failures in SB and PF occurred at the top of the hybrid layer (HL), but no obvious HL was observed in RU. SIGNIFICANCE: Luting resins with different chemical formulations and applications yield significantly different bond strengths to different regions in human dentin.

Effect of structural change of collagen fibrils on the durability of dentin bonding.

This study investigates the effect of structural changes of collagen fibrils on the bonding durability of a total etch luting resin (Super-Bond C&B) and a self-etching luting resin (Panavia F 2.0) to dentin. An atomic force microscope (AFM) was used to observe structural changes of intact dentin collagen fibrils after acidic conditionings of two bonding systems. After 90 d water storage and 15,000 thermal cycles (TC) as artificial aging, micro-tensile bond strength (microTBS) was utilized to evaluate the bonding durability of the two bonding systems to dentin. microTBS after 1 d or 90 d water storage without TC were separately measured in control groups. A cross-banding periodicity of about 67 nm along collagen fibrils was seen on demineralized intertubular dentin surfaces in AFM images. For both luting resins, thermal cycling decreased (p < 0.05) microTBS of 1 d and 90 d, compared to controls. Scanning electron microscope and transmission electron microscopic examinations revealed that the top and bottom of hybrid layer (HL) were weak links in the bonding interface over time. The results suggest that the top of HL contains disorganized collagen fibrils from the smear layer which degrade over time. AFM results indicate that the demineralized intact collagen fibrils beneath the smear layer were not denatured during acidic conditioning. However, these collagen fibrils may be structurally unstable due to poor infiltration by resin or loss of resin protection within the HL over time, reducing the long-term microTBS. This process was accelerated by thermal fatigue cycling.

Laser in situ keratomileusis outcomes following radial keratotomy, astigmatic keratotomy, photorefractive keratectomy, and penetrating keratoplasty.

PURPOSE: To evaluate the safety and efficacy of laser in situ keratomileusis (LASIK) to enhance refractive status following other corneal surgical procedures. SETTING: Clinical office-based practice. METHODS: Seventy-one eyes of 57 patients had LASIK for refractive errors following radial keratotomy (n = 22), astigmatic keratotomy (n = 13), photorefractive keratectomy (n = 18), and penetrating keratoplasty (n = 18). A Moria LSK-1 microkeratome was used with a Visx S2 or Wavelight Allegretto excimer laser. Data were acquired by retrospective chart review of all appropriately qualified patients. RESULTS: The mean preoperative manifest refractive spherical equivalent (MRSE) was -3.93 diopters (D) +/- 2.83 (SD) in myopic eyes and +1.43 +/- 1.79 D in hyperopic eyes. The mean time from the initial corneal surgical procedure to LASIK was 65.0 months. The mean post-LASIK follow-up was 9.40 months (range 1 to 42 months). Postoperatively, the mean MRSE was -0.85 +/- 1.42 D in myopic eyes (P<.0001) and -0.16 +/- 1.09 D in hyperopic eyes (P<.0001). Enhancement by LASIK was required in 14% of eyes. CONCLUSION: In eyes that have had a variety of previous corneal surgeries, LASIK offers a safe and predictable method for enhancing refractive results.

Wear, microleakage and plastic deformation of an implant-supported chair-side bar system.

PURPOSE: This in-vitro study was designed to evaluate retention forces, microleakage and plastic deformation of a prefabricated 2-implant bar attachment system (SFI-Bar, Cendres+Métaux, Switzerland). MATERIALS AND METHODS: Two SFI implant-adapters were torqued with 35 Ncm into two implant analogues. Before the tube bars were finally sealed, the inner cavity of the tube bar was filled with liquid red dye to evaluate microleakage. As tube bar sealing agents three different materials were used (AGC Cem (AGC, resin based), Cervitec Plus (CP; varnish) and Gapseal (GS; silicone based). Four groups with eight specimens each were tested (GS, GS+AGC, AGC, CP). For cyclic loading, the attachment system was assembled parallel to the female counterparts in a chewing simulator. The mean retention forces of the initial and final ten cycles were statistically evaluated (ANOVA, α≤.05). RESULTS: All groups showed a significant loss of retention forces. Their means differed between 30-39 N initially and 22-28 N after 50,000 loading cycles. No significant statistical differences could be found between the groups at the beginning (P=.224), at the end (P=.257) or between the loss of retention forces (P=.288). Microleakage occurred initially only in some groups but after 10,000 loading cycles all groups exhibited microleakage. CONCLUSION: Long-term retention forces of the SFI-Bar remained above 20 N which can be considered clinically sufficient. The sealing agents in this study are not suitable to prevent microleakage.