Genomic survey of MYB gene family in six pearl millet (Pennisetum glaucum) varieties and their response to abiotic stresses.

In addition to their roles in developmental and metabolic processes, MYB transcription factors play crucial roles in plant defense mechanisms and stress responses. A comprehensive analysis of six pearl millet genomes revealed the presence of 1133 MYB genes, which can be classified into four phylogenetically distinct subgroups. The duplication pattern of MYB genes across the pearl millet genomes demonstrates their conserved and similar evolutionary history. Overall, MYB genes were observed to be involved in drought and heat stress responses, with stronger differential expressed observed in root tissues. Multiple analyses indicated that MYB genes mediate abiotic stress responses by modulating abscisic acid-related pathways, circadian rhythms, and histone modification processes. A substantial number of duplicated genes were determined to exhibit differential expression under abiotic stress. The consistent positive expression trend observed in duplicated gene pairs, such as PMA5G04432.1 and PMA2G00728.1, across various abiotic stresses suggests that duplicated MYB genes plays a key role in the evolution of adaptive responses of pearl millet to abiotic stresses.

Bipolar Membrane Electrodialysis for Direct Conversion of L-Ornithine Monohydrochloride to L-Ornithine.

In this study, bipolar membrane electrodialysis was proposed to directly convert L-ornithine monohydrochloride to L-ornithine. The stack configuration was optimized in the BP-A (BP, bipolar membrane; A, anion exchange membrane) configuration with the Cl- ion migration through the anion exchange membrane rather than the BP-A-C (C, cation exchange membrane) and the BP-C configurations with the L-ornithine+ ion migration through the cation exchange membrane. Both the conversion ratio and current efficiency follow BP-A > BP-A-C > BP-C, and the energy consumption follows BP-A < BP-A-C < BP-C. Additionally, the voltage drop across the membrane stack (two repeating units) and the feed concentration were optimized as 7.5 V and 0.50 mol/L, respectively, due to the low value of the sum of H+ ions leakage (from the acid compartment to the base compartment) and OH- ions migration (from the base compartment to the acid compartment) through the anion exchange membrane. As a result, high conversion ratio (96.1%), high current efficiency (95.5%) and low energy consumption (0.31 kWh/kg L-ornithine) can be achieved. Therefore, bipolar membrane electrodialysis is an efficient, low energy consumption and environmentally friendly method to directly convert L-ornithine monohydrochloride to L-ornithine.

Enhance transgene responses through improving cellular uptake and intracellular trafficking by bio-inspired non-viral vectors.

BACKGROUND: Gene therapy remains a significant challenge due to lots of barriers limiting the genetic manipulation technologies. As for non-viral delivery vectors, they often suffer insufficient performance due to inadequate cellular uptake and gene degradation in endosome or lysosome. The importance of overcoming these conserved intracellular barriers is increasing as the delivery of genetic cargo. RESULTS: A surface-functionalized non-viral vector involving the biomimetic mannitol moiety is initiated, which can control the cellular uptake and promote the caveolae-mediated pathway and intracellular trafficking, thus avoiding acidic and enzymatic lysosomal degradation of loaded gene internalized by clathrin-mediated pathway. Different degrees of mannitol moiety are anchored onto the surface of the nanoparticles to form bio-inspired non-viral vectors and CaP-MA-40 exhibits remarkably high stability, negligible toxicity, and significantly enhanced transgene expression both in vitro and in vivo. CONCLUSIONS: This strategy highlights a paradigmatic approach to construct vectors that need precise intracellular delivery for innovative applications.

Anisotropic Gas Separation in Oriented ZIF-95 Membranes Prepared by Vapor-Assisted In-Plane Epitaxial Growth.

Control of the microstructure grain orientation, grain boundaries and thickness are crucial for MOF membranes. We report a novel synthesis strategy to prepare highly c-oriented ZIF-95 membranes through vapor-assisted in-plane epitaxial growth. In a mixed DMF/water vapor atmosphere, in-plane epitaxial growth of a ZIF-95 seeds layer was achieved to obtain an oriented and well-intergrown ZIF-95 membrane with a thickness of only 600 nm. Demonstrated by both experimental and simulation studies, the c-oriented ZIF-95 membrane displayed superior separation performance because a perfectly oriented structure resulted in a notable reduction of intercrystalline defects and transport pathways. For the separation of equimolar binary mixtures at 100 °C and 1 bar, the mixture separation factors of H2 /CO2 and H2 /CH4 were 32.2 and 53.7, respectively, with an H2 permeance of over 7.9×10-7  mol m-2 s-1 Pa-1 , which was 4.6 times higher than that of a randomly oriented ZIF-95 membrane.

Polymer Composite Membrane with Penetrating ZIF-7 Sheets Displays High Hydrogen Permselectivity.

Oriented and penetrating molecular sieving membranes display enhanced separation performance. A polyimide (PI) solution containing highly dispersed ZIF-7(III) sheets in CHCl3 was deposited on a glass side and subjected to flat-scraping with a membrane fabricator. In this way we developed a novel oriented and penetrating ZIF-7@PI mixed matrix membrane (MMM) with 50 wt. % ZIF-7 loading. Because the height of the ZIF-7 sheets (5 µm) is higher than the film thickness, every ZIF-7 sheet penetrates both surfaces of the polyimide film. Since the ZIF-7 channels are the dominant pathway for gas permeation, the ZIF-7@PI MMM displays a high molecular sieve performance for the separation of H2 (0.29 nm) from larger gas molecules. At 100 °C and 2 bar, the mixture separation factors of H2 /CO2 and H2 /CH4 are 91.5 and 128.4, with a high H2 permeance of about 3.0×10-7  mol m-2 s-1 Pa-1 , which is promising for hydrogen separation by molecular sieving.

Construction and evaluation of BSA-CaP nanomaterials with enhanced transgene performance via biocorona-inspired caveolae-mediated endocytosis.

Non-viral nanovectors have attracted much attention owing to their ability to condense genetic materials and their ease of modification. However, their poor stability, low biocompatibility and gene degradation in endosomes or lysosomes has significantly hampered their application in vivo and in the clinic. In an attempt to overcome these difficulties a series of bovine serum albumin (BSA)-calcium phosphate (CaP) nanoparticles were constructed. The CaP condenses with DNA to form nanocomplexes coated with a biomimetic corona of BSA. Such complexes may retain the inherent endocytosis profile of BSA, with improved biocompatibility. In particular the transgene performance may be enhanced by stimulating the cellular uptake pathway via caveolae-mediated endocytosis. Two methods were employed to construct and optimize the formulation of BSA-CaP nanomaterials. The optimized BSA-CaP-50-M2 nanoparticles prepared by our second method exhibited good stability, negligible cytotoxicity and enhanced transgene performance with long-term expression for 72 h in vivo even with a single dose. Determination of the cellular uptake pathway and Western blot revealed that cellular uptake of the designed BSA-CaP-50-M2 nanoparticles was mainly via caveolae-mediated endocytosis in a non-degradative pathway in which the biomimetic uptake profile of BSA was retained.

Chitosan cross-linked with poly(ethylene glycol)dialdehyde via reductive amination as effective controlled release carriers for oral protein drug delivery.

The covalently cross-linked chitosan-poly(ethylene glycol)1540 derivatives have been developed as a controlled release system with potential for the delivery of protein drug. The swelling characteristics of the hydrogels based on these derivatives as the function of different PEG content and the release profiles of a model protein (bovine serum albumin, BSA) from the hydrogels were evaluated in simulated gastric fluid with or without enzyme in order to simulate the gastrointestinal tract conditions. The derivatives cross-linked with difunctional PEG1540-dialdehyde via reductive amination can swell in alkaline pH and remain insoluble in acidic medium. The cumulative release amount of BSA was relatively low in the initial 2h and increased significantly at pH 7.4 with intestinal lysozyme for additional 12h. The results proved that the release-and-hold behavior of the cross-linked CS-PEG1540H-CS hydrogel provided a swell and intestinal enzyme controlled release carrier system, which is suitable for oral protein drug delivery.

Design and application of cationic amphiphilic ß-cyclodextrin derivatives as gene delivery vectors.

The nano self-assembly profiles of amphiphilic gene delivery vectors could improve the density of local cationic head groups to promote their DNA condensation capability and enhance the interaction between cell membrane and hydrophobic tails, thus increasing cellular uptake and gene transfection. In this paper, two series of cationic amphiphilic ß-cyclodextrin (ß-CD) derivatives were designed and synthesized by using 6-mono-OTs-ß-CD (1) as the precursor to construct amphiphilic gene vectors with different building blocks in a selective and controlled manner. The effect of different type and degree of cationic head groups on transfection and the endocytic mechanism of ß-CD derivatives/DNA nanocomplexes were also investigated. The results demonstrated that the designed ß-cyclodextrin derivatives were able to compact DNA to form stable nanocomplexes and exhibited low cytotoxicity. Among them, PEI-1 with PEI head group showed enhanced transfection activity, significantly higher than commercially available agent PEI25000 especially in the presence of serum, showing potential application prospects in clinical trials. Moreover, the endocytic uptake mechanism involved in the gene transfection of PEI-1 was mainly through caveolae-mediated endocytosis, which could avoid the lysosomal degradation of loaded gene, and had great importance for improving gene transfection activity.

Enhanced gene transfection performance and biocompatibility of polyethylenimine through pseudopolyrotaxane formation with α-cyclodextrin.

Polyethylenimine (PEI), a commercially available gene transfection reagent, is a promising nonviral vector due to its inherent ability to efficiently condense genetic materials and its successful transfection performance in vitro. However, its low transfection efficiency in vivo, along with its high cytotoxicity, limit any further applications in gene therapy. To enhance the gene transfection performance and reduce the cytotoxicity of linear polyethylenimine, pseudopolyrotaxane PEI25k/CD and the polyrotaxanes PEI25k/CD-PA and PEI25k/CD-PB were prepared and their transfection efficiencies were then evaluated. The pseudopolyrotaxane PEI25k/CD exhibited better transfection efficiency and lower cytotoxicity than the transfection reagent linear PEI25k, even in the presence of serum. It also showed a remarkably higher cell viability, similar DNA protecting capability, and better DNA decondensation and release ability, and could be useful for the development of novel and safe nonviral gene delivery vectors for gene therapy.

Cholesterol derived cationic lipids as potential non-viral gene delivery vectors and their serum compatibility.

Cholesterol derivatives M1-M6 as synthetic cationic lipids were designed and the biological evaluation of the cationic liposomes based on them as non-viral gene delivery vectors were described. Plasmid pEGFP-N1, used as model gene, was transferred into 293T cells by cationic liposomes formed with M1-M6 and transfection efficiency and GFP expression were tested. Cationic liposomes prepared with cationic lipids M1-M6 exhibited good transfection activity, and the transfection activity was parallel (M2 and M4) or superior (M1 and M6) to that of DC-Chol derived from the same backbone. Among them, the transfection efficiency of cationic lipid M6 was parallel to that of the commercially available Lipofectamine2000. The optimal formulation of M1 and M6 were found to be at a mol ratio of 1:0.5 for cationic lipid/DOPE, and at a N/P charge mol ratio of 3:1 for liposome/DNA. Under optimized conditions, the efficiency of M1 and M6 is greater than that of all the tested commercial liposomes DC-Chol and Lipofectamine2000, even in the presence of serum. The results indicated that M1 and M6 exhibited low cytotoxicity, good serum compatibility and efficient transfection performance, having the potential of being excellent non-viral vectors for gene delivery.

Preparation, Physicochemical Properties, and Transfection Activities of Tartaric Acid-Based Cationic Lipids as Effective Nonviral Gene Delivery Vectors.

In this work two novel cationic lipids using natural tartaric acid as linking backbone were synthesized. These cationic lipids were simply constructed by tartaric acid backbone using head group 6-aminocaproic acid and saturated hydrocarbon chains dodecanol (T-C12-AH) or hexadecanol (T-C16-AH). The physicochemical properties, gel electrophoresis, transfection activities, and cytotoxicity of cationic liposomes were tested. The optimum formulation for T-C12-AH and T-C16-AH was at cationic lipid/dioleoylphosphatidylethanolamine (DOPE) molar ratio of 1 : 0.5 and 1 : 2, respectively, and N/P charge molar ratio of 1 : 1 and 1 : 1, respectively. Under optimized conditions, T-C12-AH and T-C16-AH showed effective gene transfection capabilities, superior or comparable to that of commercially available transfecting reagent 3ß-[N-(N',N'-dimethylaminoethyl)carbamoyl]cholesterol (DC-Chol) and N-[2,3-dioleoyloxypropyl]-N,N,N-trimethylammonium chloride (DOTAP). The results demonstrated that the two novel tartaric acid-based cationic lipids exhibited low toxicity and efficient transfection performance, offering an excellent prospect as nonviral vectors for gene delivery.

Low-temperature cross-talk magnetic-field sensor based on tapered all-solid waveguide-array fiber and magnetic fluids.

A compact fiber-optic magnetic-field sensor based on tapered all-solid waveguide-array fiber (WAF) and magnetic fluid (MF) has been proposed and experimentally demonstrated. The tapered all-solid WAF is fabricated by using a fusion splicer, and the sensor is formed by immersing the tapered all-solid WAF into the MF. The transmission spectra have been measured and analyzed under different magnetic-field intensities. Experimental results show that the acquired magnetic-field sensitivity is 44.57 pm/Oe for a linear magnetic-field intensity range from 50 to 200 Oe. All-solid WAF has very similar thermal expansion coefficient for high- and low-refractive-index glasses, so mode profile is not affected by thermal drifts. Also, magnetically induced refractive-index changes into the ferrofluid are of the order of ∼5×10(-2), while the corresponding thermally induced refractive-index changes into the ferrofluid are expected to be lower. The temperature response has also been detected, and the temperature-induced wavelength shift perturbation is less than 0.3 nm from temperature of 26.9°C-44°C. The proposed magnetic-field sensor has such advantages as low temperature sensitivity, simple structure, and ease of fabrication. It also indicates that the magnetic-field sensor based on tapered all-solid WAF and MF is helpful to reduce temperature cross-sensitivity for the measurement of magnetic field.

Photonic crystal fiber modal interferometer based on thin-core-fiber mode exciter.

A thin-core-fiber excited photonic crystal fiber modal interferometer has been proposed and experimentally demonstrated. By employing a thin-core fiber as the mode exciter, both of the core and cladding modes propagate in the photonic crystal fiber and interfere with each other. The experimental results show that the transmission dips corresponding to different-order modes have various strain responses with opposite shift directions. The strain sensitivity could be improved to 58.57 pm/µÎµ for the applied strain from 0 to 491 µÎµ by utilizing the wavelength interval between the dips with opposite shift directions. Moreover, due to the pure silica property of the employed photonic crystal fiber, the proposed fiber modal interferometer exhibits a low-temperature sensitivity of about 0.56 pm/°C within a temperature range from 26.4°C (room temperature) to 70°C. Additionally, the proposed fiber modal interferometer has several advantages, such as good stability, compact structure, and simple fabrication. Therefore, it is more applicable for strain measurement with reducing temperature cross-sensitivity.

Single nucleotide polymorphism of RANKL and OPG genes may play a role in bone and joint injury in rheumatoid arthritis.

OBJECTIVES: This paper aims to investigate the influence of single-nucleotide polymorphisms (SNPs) in the receptor of activator of nuclear factor kappaB ligand (RANKL) gene (TNFSF11) and osteoprotegerin (OPG) gene (TNFRSF11B) on bone and joint injury in patients with rheumatoid arthritis (RA). METHODS: Two hundred RA patients and 201 matched controls were analysed by case-control design, and their samples were genotyped. Bone mineral density (BMD) and serum OPG and RANKL levels were measured. Clinical and laboratory parameters were recorded, and the radiographic changes in both hands of RA were evaluated by Sharp's method. RESULTS: Our results showed no significant differences in the distribution frequency of the alleles and genotypes of TNFRSF11B (rs2073618 and rs3102735) and TNFSF11 (rs2277438) between the RA group and controls (p>0.05). Compared to patients with TNFSF11 (rs2277438) AA or GG genotype, RA with TNFSF11 (rs2277438) AG genotype had significantly decreased BMD values at lumbar spine 3, lumbar spine 4, lumbar spine 2-4 (p<0.05-0.01), and apparently elevated Sharp scores (p<0.05), respectively. The RA group showed significantly higher serum levels of RANKL, RANKL/OPG ratio and a lower serum level of OPG than that of the controls (p<0.05-0.0001). RA patients with RANKL-rs2277438 heterozygotic genotype (AG) had significantly increased serum levels of RANKL (p<0.05), compared to homozygotic genotype (AA or GG). CONCLUSIONS: These results indicate that SNP of TNFRSF11B (rs2073618 and rs3102735) and TNFSF11 (rs2277438) may not be susceptibility factors for RA in Chinese Han population. SNP of TNFSF11 (rs2277438) may have an important influence on bone and joint injury in RA.

[Exploration of risk factors on the occurrence of osteoporotic vertebral fracture in patients with rheumatoid arthritis].

OBJECTIVE: To explore the prevalence of osteoporosis (OP) and vertebral osteoporotic fracture (OPF) and related risk factors in patients with rheumatoid arthritis (RA). METHOD: A total of 644 patients with RA from Jan. 2010 to Oct. 2013 were recruited, anteroposterior and lateral X-rays examination of vertebral column (T5-L5) were conducted, and semi-quantity method were used as the standard for judging vertebral OPF. Meanwhile, patients' clinical and laboratory data including daily dosage of glucocorticoid, duration of glucocorticoid usage, cumulative amount dosage of glucocorticoid were recorded in details. 158 normal subjects were selected as control group. RESULTS: (1)The prevalence of vertebral OPF in patients with RA was 16.6%. Bone mineral density (BMD) of all measured lumbar vertebra in RA group were markedly decreased [(0.97 ± 0.22) g/cm(2)]. The total prevalence of OP at lumbar vertebra in RA was 17.9% (81/452), which was significantly higher than that of control group (4.4%, 7/158) (P < 0.001). (2) The percentage of OP in RA patients with vertebral OPF was significantly higher than that in patients without OPF [40.6% (41/101) vs 11.4% (40/351); P < 0.001]. Patients with OPF were of older age, longer use of glucocorticoid, more cumulative amount dosage of glucocorticoid, longer disease duration, higher scores of health assessment questionnaires (HAQ) and increased ESR (P < 0.05). (3) Logistic regression analysis revealed that age (OR = 1.094, 95% CI 1.065-1.125, P < 0.001) and gender (1 = male, 2 = female) (OR = 5.600, 95% CI 2.097-15.087, P = 0.001) were the risk factors for the development of OP in RA, while body mass index (BMI) was the protective factor (OR = 0.770, 95% CI 0.696-0.853, P < 0.001). Age (OR = 1.031, 95% CI 1.009-1.053, P = 0.005) and occurrence of OP at lumbar vertebra (OR = 3.765, 95% CI 2.092-6.776, P < 0.001) were risk factors of the development of OPF in RA patients. Logistic regression analysis also showed that RA was the risk factor of OPF (OR = 4.716, 95% CI 1.987-11.192, P < 0.001), even after the adjustment of age, gender and BMI. (4) Receiver operator characteristic(ROC) curve in RA patients with OPF has found that age-OPF and daily dosage of glucocorticoid-OPF AUCROC were 0.689 and 0.636 respectively. The cut-off value in ROC curve of age and daily dose or treatment course of glucocorticoid-OPF were 54.5 years and 6.25 mg (P < 0.001) , while duration of glucocorticoid usage-OPF AUCROC was 0.685, with cut-off value in ROC of age-OPF 135 days (P < 0.001). CONCLUSION: Prevalence of OPF in patients with RA increases remarkably. Old age and OP at spine are risk factors related to the development of OPF in patients with RA.

Comparative Analysis of Plant Growth-Promoting Rhizobacteria's Effects on Alfalfa Growth at the Seedling and Flowering Stages under Salt Stress.

Alfalfa (Medicago sativa L.), a forage legume known for its moderate salt-alkali tolerance, offers notable economic and ecological benefits and aids in soil amelioration when cultivated in saline-alkaline soils. Nonetheless, the limited stress resistance of alfalfa could curtail its productivity. This study investigated the salt tolerance and growth-promoting characteristics (in vitro) of four strains of plant growth-promoting rhizobacteria (PGPR) that were pre-selected, as well as their effects on alfalfa at different growth stages (a pot experiment). The results showed that the selected strains belonged to the genera Priestia (HL3), Bacillus (HL6 and HG12), and Paenibacillus (HG24). All four strains exhibited the ability to solubilize phosphate and produce indole-3-acetic acid (IAA) and 1-aminocyclopropane-1-carboxylate (ACC) deaminase. Among them, except for strain HG24, the other strains could tolerate 9% NaCl stress. Treatment with 100 mM NaCl consistently decreased the IAA production levels of the selected strains, but inconsistent changes (either enhanced or reduced) in terms of phosphate solubilization, ACC deaminase, and exopolysaccharides (EPS) production were observed among the strains. During the various growth stages of alfalfa, PGPR exhibited different growth-promoting effects: at the seedling stage, they enhanced salt tolerance through the induction of physiological changes; at the flowering stage, they promoted growth through nutrient acquisition. The current findings suggest that strains HL3, HL6, and HG12 are effective microbial inoculants for alleviating salt stress in alfalfa plants in arid and semi-arid regions. This study not only reveals the potential of indigenous salt-tolerant PGPR in enhancing the salt tolerance of alfalfa but also provides new insights into the mechanisms of action of PGPR.

RNA-based modulation of macrophage-mediated efferocytosis potentiates antitumor immunity in colorectal cancer.

Tumor-associated macrophages play pivotal roles in tumor progression and metastasis. Macrophage-mediated clearance of apoptotic cells (efferocytosis) supports inflammation resolution, contributing to immune evasion in colorectal cancers. To reverse this immunosuppressive process, we propose a readily translatable RNA therapy to selectively inhibit macrophage-mediated efferocytosis in tumor microenvironment. A clinically approved lipid nanoparticle platform (LNP) is employed to encapsulate siRNA for the phagocytic receptor MerTK (siMerTK), enabling selective MerTK inhibition in the diseased organ. Decreased MerTK expression in tumor-associated macrophages results in apoptotic cell accumulation and immune activation in tumor microenvironment, leading to suppressed tumor growth and better survival in both liver and peritoneal metastasis models of colorectal cancers. siMerTK delivery combined with PD-1 blockade further produces enhanced antimetastatic efficacy with reactivated intratumoral immune milieu. Collectively, LNP-based siMerTK delivery combined with immune checkpoint therapy may present a feasible modality for metastatic colorectal cancer therapy.

Bipolar Membrane Electrodialysis for Cleaner Production of Diprotic Malic Acid: Separation Mechanism and Performance Evaluation.

Bipolar membrane electrodialysis (BMED) is a promising process for the cleaner production of organic acid. In this study, the separation mechanism of BMED with different cell configurations, i.e., BP-A, BP-A-C, and BP-C (BP, bipolar membrane; A, anion exchange membrane; C, cation exchange membrane), to produce diprotic malic acid from sodium malate was compared in consideration of the conversion ratio, current efficiency and energy consumption. Additionally, the current density and feed concentration were investigated to optimize the BMED performance. Results indicate that the conversion ratio follows BP-C > BP-A-C > BP-A, the current efficiency follows BP-A-C > BP-C > BP-A, and the energy consumption follows BP-C < BP-A-C < BP-A. For the optimized BP-C configuration, the current density was optimized as 40 mA/cm2 in consideration of low total process cost; high feed concentration (0.5-1.0 mol/L) is more feasible to produce diprotic malic acid due to the high conversion ratio (73.4-76.2%), high current efficiency (88.6-90.7%), low energy consumption (0.66-0.71 kWh/kg) and low process cost (0.58-0.59 USD/kg). Moreover, a high concentration of by-product NaOH (1.3497 mol/L) can be directly recycled to the upstream process. Therefore, BMED is a cleaner, high-efficient, low energy consumption and environmentally friendly process to produce diprotic malic acid.

MAPK4 silencing in gastric cancer drives liver metastasis by positive feedback between cancer cells and macrophages.

Liver metastasis is a major cause of death in gastric cancer patients, but the underlying mechanisms are poorly understood. Through a combination of in vivo screening and transcriptome profiling followed by quantitative RT-PCR and tissue array analyses, we found that mitogen-activated protein kinase 4 (MAPK4) downregulation in gastric cancer tissues from patients is significantly associated with liver metastasis and poor prognosis. The knockdown of MAPK4 in gastric cancer cells promotes liver metastasis in orthotopic mouse models. MAPK4 depletion in gastric cancer cells induces the secretion of macrophage migration inhibitory factor (MIF) to polarize tumor-associated macrophages (TAMs) in orthotopic xenograft tumors. Moreover, TAMs activate epithelial-mesenchymal transition of gastric cancer cells to suppress MAPK4 expression, which further increases MIF secretion to polarize TAMs. Taken together, our results suggest a previously undescribed positive feedback loop between cancer cells and macrophages mediated by MAPK4 silencing that facilitates gastric cancer liver metastasis.

Proteomic and physiological responses of contrasting two different heat-resistant orchardgrass genotypes to heat stress.

As an important forage crop worldwide, the growth and productivity of orchardgrass are greatly impacted by high temperatures. However, little information is known about how orchardgrass proteomic changes under heat conditions. Therefore, the present study investigated the proteomics and physiological changes in 667 [AKZ-NRGR667 (heat-tolerant)] and 7602 [PI237602 (heat-sensitive)] under heat stress (40/35 °C). In addition, the responses of translational regulating of heat stress in orchardgrass were analyzed through proteomic changes using the tandem mass tags (TMT) technique. Together, 410 differentially expressed proteins (DEPs) were identified from two orchardgrass genotypes under heat at 24 h. Proteomics analyses indicated that proteins related to substance metabolism, photosynthesis, and heat shock proteins (HSPs) were differentially expressed under heat stress and control conditions. Moreover, a large proportion of HSPs were expressed in the heat-tolerant genotype as compared to the heat-sensitive genotype. In conclusion, genotype 667 has higher adaptability and repairing capability due to stronger heat tolerance capacity that can make it more suited to sustaining its survival and growth than genotype 7602. These findings can provide the basis for genetic improvements in orchardgrass and other crops facing high-temperature stress or heat environment that may lead to heat resistance or tolerance.