Trace metal(loid)s contamination in paddy rice (Oryza sativa L.) from wetlands near two gold mines in Côte d'Ivoire and health risk assessment.

This study examined the concentrations of arsenic (As), cadmium (Cd), and mercury (Hg) in rice grains grown in wetlands associated with gold mining in central-southern of Côte d'Ivoire to evaluate potential health risks exposure via rice consumption. In total, 30 rice grains were sampled around Agbaou and Bonikro gold mines. Arsenic and cadmium concentrations were determined using an inductively coupled plasma-optical emission spectrometer (ICP-OES), while atomic absorption spectrometry (AAS) was used for mercury. Results showed that As and Hg average concentrations in rice were above the permissible limits, while Cd average concentrations were below the permissible limit established by FAO/WHO in both sites. Except for Hg at Agbaou, no significant (p < 0.05) difference was found between trace metal concentrations in the two sites. The average daily intake (ADI) of As via rice consumption exceeded the USEPA reference dose (RfD) of 0.0003 µg g-1 day-1, indicating that rice ingestion is a pathway of As exposure for adults and children in the area. The average values of non-carcinogen (HQ) for As and carcinogen (CR) for As and Cd risks index suggest that potential health risks exist for both adults and children due to rice consumption at Agbaou and Bonikro. The maximum safe weekly consumption (MSWC) of rice relative to As, Cd, and Hg was estimated for the study area. Overall, this study provides strong evidence that As could threaten local population health in Côte d'Ivoire regions where gold mine extraction is occurring through rice ingestion.

Effect of natural geotextile on the cotransport of heavy metals (Cu2+, Pb2+, and Zn2+) and kaolinite particles.

A cotransport study of heavy metals and kaolinite particles in sand column with and without flax geotextiles was carried out. The objectives were to evaluate the potential role of kaolinite in heavy metals transfer and to analyse the influence of flax geotextiles on the transfer of these pollutants. The adsorption rates of heavy metals on the kaolinite particles were, respectively, 53%, 65% and 25% for copper, lead, and zinc. The injection of kaolinite with heavy metals resulted in a significant decrease in the retention efficiency of copper and lead in the filter. The presence of kaolinite in the injected solution has virtually no influence on the effectiveness of zinc fixation in the filter. The retention of heavy metals is in the order of Zn > Cu > Pb with a significant drop of retention efficiency of 34% for copper, 67% for lead, and less than 1% for zinc. The presence of kaolinite in the injected solution reversed the retention order of heavy metals when metals solution was injected alone. Flax geotextiles increase the ability of the filter to retain soluble and attached heavy metals. It improves the sand retention capacity and it retains soluble and attached metals in its structure.

Direct Inlet Probe Atmospheric Pressure Photo and Chemical Ionization Coupled to Ultrahigh Resolution Mass Spectrometry for the Description of Lignocellulosic Biomass.

Lignocellulosic biomass, in particular wood, is a complex mixture containing cellulose, hemicellulose, lignin, and other trace compounds. Chemical analysis of these biomasses, especially lignin components, is a challenge. Lignin is a highly reticulated polymer that is poorly soluble and usually requires chemical, enzymatic, or thermal degradation for its analysis. Here, we studied the thermal degradation of lignocellulosic biomass using a direct insertion probe (DIP). The DIP was used with two ionization sources: atmospheric pressure chemical ionization (APCI) and atmospheric pressure photoionization (APPI) coupled to ultrahigh-resolution mass spectrometry. Beech lignocellulosic biomass samples were used to develop the DIP-APCI/APPI methodology. Two other wood species (maple and oak) were analyzed after optimization of DIP parameters. The two ionization sources were compared at first and showed different responses toward beech samples, according to the source specificity. APPI was more specific to lignin degradation compounds, whereas APCI covered a larger variety of oxygenated compounds, e.g., fatty acids and polyphenolics compounds, in addition to lignin degradation products. The study of the thermodesorption profile gave information on the different steps of lignocellulosic biomass pyrolysis. The comparison of the three feed sample types (oak, maple, and beech), using principal component analysis (PCA) with DIP-APCI experiments, showed molecular level differences between beech wood pellets and the two other wood species (maple and oak).

Nonwoven flax fibres geotextiles effects on solute heavy metals transport in porous media.

Filtration tests were carried out in laboratory columns filled with crushed sand with and without flax geotextiles to study the transfer and retention of soluble heavy metals. Divalent cations of copper, zinc and lead were simultaneously and continuously injected in filtration columns. Results show that, when geotextiles discs are present the retention of metals in sand is favoured and retention profiles are modified. In addition, and unlike synthetic geotextiles, flax fibres geotextiles contribute to the retention of a significant fraction of the cationic metal pollutants in their own structure. The overall metals retention efficiency of the filter is improved. Competition between cationic metals for adsorption on retention sites occurs in the column in the order Pb > Cu > Zn. Most of the lead is retained in the inlet of the column while copper and even more zinc migrate deeper in the column.

Particulate inorganic salts and trace element emissions of a domestic boiler fed with five commercial brands of wood pellets.

Pellet stoves arouse a real interest from consumers because they are perceived as a renewable and carbon neutral energy. However, wood combustion can contribute significantly to air pollution, in particular through the emission of particulate matter (PM). In this article, five brands of wood pellets were burnt under optimal combustion conditions and trace element and inorganic salt emission factors (EFs) in PM were determined. Results show that a significant proportion of metals such as lead, zinc, cadmium, and copper initially present in pellets were emitted into the air during combustion with 20 ± 6%, 31 ± 12%, and 19 ± 6% of the initial content respectively for Zn, Pb, and Cd. The median emission factors for Pb, Cu, Cd, As, Zn, and Ni were respectively 188, 86, 9.3, 8.7, 2177, and 3.5 µg kg-1. The inorganic fraction of the PM emissions was dominated by K+, SO42-, and Cl- with respective EFs of 33, 28.7, and 11.2 mg kg-1. Even taking into account a consumption of 40.1 million tons by 2030 in the EU, the resulting pollution in terms of heavy metal emissions remains minimal in comparison with global emissions in the EU.

Development of two-dimensional gas chromatography (GC×GC) coupled with Orbitrap-technology-based mass spectrometry: Interest in the identification of biofuel composition.

Comprehensive gas chromatography (GC) has emerged in recent years as the technique of choice for the analysis of volatile and semivolatile compounds in complex matrices. Coupling it with high-resolution mass spectrometry (MS) makes a powerful tool for identification and quantification of organic compounds. The results obtained in this study showed a significant improvement by using GC×GC-EI-MS in comparison with GC-EI-MS; the separation of chromatogram peaks was highly improved, which facilitated detection and identification. However, the limitation of Orbitrap mass analyzer compared with time-of-flight analyzer is the data acquisition rate; the frequency average was about 25 Hz at a mass resolving power of 15.000, which is barely sufficient for the proper reconstruction of the narrowest chromatographic peaks. On the other hand, the different spectra obtained in this study showed an average mass accuracy of about 1 ppm. Within this average mass accuracy, some reasonable elemental compositions can be proposed and combined with characteristic fragment ions, and the molecules can be identified with precision. At a mass resolving power of 7.500, the scan rate reaches 43 Hz and the GC×GC-MS peaks can be represented by more than 10 data points, which should be sufficient for quantification. The GC×GC-MS was also applied to analyze a cellulose bio-oil sample. Following this, a highly resolved chromatogram was obtained, allowing EI mass spectra containing molecular and fragment ions of many distinct molecules present in the sample to be identified.

Flux estimation, temporal trends and source determination of trace metal contamination in a major tributary of the Seine estuary, France.

Anthropogenic impacts on rivers have increased significantly over the past ~150 years, particularly at the beginning of the industrial revolution. Among other signs, this impact is manifested through the addition of trace metals and metalloid elements to rivers. The Eure River watershed in France covers an area of 6017 km2 and is a major tributary of the Seine estuary. It is not exempt from anthropogenic pressures and has been exposed to significant metal discharges over the last 80 years. The average concentrations of metals (i.e., Cr, Co, Ni, Cu, Zn, Ag, Cd, Sb, and Pb), in suspended particulate matter currently transported by the river are high compared to the local geochemical background. Moreover, the lack of correlation between concentration variations and the hydrosedimentary behaviour of the Eure River suggests that the river is currently under anthropogenic pressure. Analysis of sediment cores indicate strong As contamination during the 1940s, Cr, Co, Ni, Cu, Zn, Ag, and Cd contamination during the 1960s and 1970s, and Sb and Pb contamination during the 1990s and 2000s. The enrichment factors calculation suggests that total anthropogenic pressure within the Eure River watershed since the 1940s was comparable or higher than those in many other French watersheds. An estimation of particulate metal flux in 2017 shows that the Eure River watershed contributed to 7, 8, 9, 10 and 16% of total inputs to the Seine estuary in Cr, Cu, Zn, Cd and Pb respectively. Moreover, the estimation of past theoretical flux indicates that during the 1990s the Eure River watershed was the main contributor of particulate Pb to the estuary. The use of Pb isotopes has revealed that this contamination was primarily of industrial origin.

Determination of iodine in polyamide by inductively-coupled plasma/mass spectrometry.

A method was developed for the determination of iodine in polyamide (PA). This method is needed as PA containing iodine (such as CuI/KX (X = I or Br) heat stabilizing agent), may represent a risk of corrosion for electronic parts in the automotive industry. The method involved a microwave assisted digestion method using nitric acid followed by inductively coupled plasma mass spectrometry (ICP-MS) analysis. A dilution in 0.5% NH3 was needed prior to ICP-MS analysis to suppress memory effect. The limit of quantification was estimated to be 0.9 mg kg-1 which allows the control of very low iodine content PA used for applications in sensitive electronic parts. Spiking with iodide at 50 mg kg-1 gave recovery factors of 100 ±â€¯0.8%. The acid digestion method was compared with microwave assisted extraction of PA with 5% NH3 solution. Alkaline extraction gave slightly lower results (10% below). Finally, the acid digestion method was applied to the analysis of raw materials PA pellets and molded parts (used or not). Obtained iodine contents were ranged from < 0.9-1000 mg kg-1 with relative standard deviation (RSD) on samples in the range 2.2-4.5%.

Preliminary data on arsenic and trace metals concentrations in wetlands around artisanal and industrial mining areas (Cote d'Ivoire, West Africa).

This data article is issued from the research article ''Distribution trends and ecological risks of arsenic and trace metals in wetland sediments around gold mining activities in central-southern and southeastern Côte d'Ivoire'' [1]. It presents arsenic and trace metal Cd, Pb, Cu, Zn, Cr, Co, Fe, Al, Mn, and Ni loadings in surface sediments collected from industrial mining, artisanal and small scale mining, and non-mining areas (West Africa). Are also provided, hierarchical dendrograms and factor loadings derived from the Hierarchical Clustering Analysis (HCA) and the principal component analysis (PCA), respectively. Data ranged from

Experimental investigation on removal of suspended particles from water using flax fibre geotextiles.

Natural geotextiles are increasingly used in geotechnical applications such as bank protection and short-term soil reinforcement. This study aimed to highlight the behaviour of natural flax fibre geotextiles towards the retention of suspended particles (SP) present in urban runoff and often polluted. Indeed, it is well known that a large fraction of the heavy metals are often associated with the SP. Long-term filtration tests were performed on four laboratory filter designs. The objective was to study the influence of a nonwoven flax fibre geotextiles on SP transfer through a sandy porous media under saturated conditions. The experiments consisted of injecting SP in a column filled with sand with and without flax fibre geotextiles at a constant flow rate. The results showed that nonwoven flax fibre geotextiles can increase flow homogeneity. Retention efficiency of SP at column scale as well as spatial deposition profile was modified by the presence of geotextile. The use of flax fibre geotextiles increases considerably the durability of the filtration system. Particle size analysis of the particles retained in the sand medium and in geotextiles shows that the coarser particles are mainly deposited at the entrance of the column, and in the geotextiles.

Performance of vegetated swales for improving road runoff quality in a moderate traffic urban area.

In recent years, due to their economic and ecological advantages, green infrastructures for stormwater management have been widely implemented. The present study focused on vegetated swales and compared two vegetated covers, grassed or planted with macrophytes in order to evaluate their performance in terms of water quality improvement. These swales collected runoff of a moderately busy road (<2500vehday(-1)) in a commercial area. Twelve storm events were analyzed over a two year period with measurement of total suspended solids (TSS), chemical oxygen demand (COD), biochemical oxygen demand (BOD), total hydrocarbons (THC), total phosphorous (TP), total Kjeldahl nitrogen (TKN), trace elements and 16 polycyclic aromatic hydrocarbons (PAHs). The grass cover led to poor results due to lower retention of soil particles on which trace elements and PAHs are bounded. The swales planted with macrophytes, with a deeper root system more capable of retaining soil particles, led to reductions of concentrations from 17 to 45% for trace elements such as lead, zinc and copper and 30% for the 16 PAHs in infiltrated waters. In addition, the macrophyte cover showed lower variability of pollutant concentrations in infiltrated waters compared to incoming waters. This buffering capacity is interesting to mitigate the impact of moderate peak pollution on surface water or ground water quality.

Total synthesis and structural confirmation of malayamycin A: a novel bicyclic C-nucleoside from Streptomyces malaysiensis.

[reaction: see text] The stereocontrolled synthesis of malayamycin A, a novel naturally occurring bicyclic C-nucleoside of the perhydrofuropyran type, is described.