New toothpaste to deal with dentine hypersensitivity: double-blind randomized controlled clinical trial.

OBJECTIVES: The purpose was to evaluate a combined effect of active ingredients contained in new toothpaste in reducing dentine hypersensitivity. METHODS: The tested toothpaste contained active ingredients potassium nitrate (5.00%) and zinc citrate (0.50%). Pain to water stimulus and blowing air was reported on hypersensitive teeth and measured using the VAS (Visual Analogue Scale). The degree of pain to water stimulus was detected after each subject drank a few sips of water which was boiled to the room temperature. Data were collected on each subject's dental history. RESULTS: A significant reduction in dentine hypersensitivity (26-29% after 2 weeks versus 40% after 4 weeks) was detected in the tested group. The controls also showed significant reduction to both stimuli, but at lower rate. A statistically significant difference to blowing air and water stimuli showed the highest impact for the tested group after 4 weeks (P = 0.033, P = 0.006). CONCLUSION: This study supports the efficacy of the tested toothpaste in reducing the phenomenon of dentine hypersensitivity after 4 weeks of usage.

Oral health in children with Down syndrome: Parents' views on dental care in Flanders (Belgium).

AIM: Evaluate the views and knowledge, regarding dental care, of parents who have a child with Down syndrome (DS). MATERIALS AND METHODS: Parents of children with DS were invited to fill in a questionnaire. They were recruited by the Flemish Organization for DS, from schools for children with special needs and by four multidisciplinary medical DS teams at four University Hospitals. STATISTICS: Chi-square tests were used to test the correlation between different variables. Results were assessed in the 95% confidence interval with p<0.05. RESULTS: Mean age of the children was 10.1 years old (SD: 5.3). Oral health was indicated as rather good by 53% of the parents. Of the children, 66% went to a dentist within the last six months. Most of the children (64%) received a dental examination. In 53% of the cases, parents visited the same dentist for their child with DS as their other child(ren) without DS. Eighty-three percent of the parents are pleased with their dentist. They expect the dentist to be kind and reassuring. Children aged 10 years or younger get significantly more help with tooth brushing (79%) than children older than 10 years (36%). However 20% of the parents never received any oral hygiene instructions for their child with DS. CONCLUSION: Prevention is the most frequent service provided by the dentist. Parents seem to be pleased with the dentist who treats their child with DS.

Temporomandibular disorders in young people with an intellectual disability: prevalence of signs and symptoms.

AIM: To assess the prevalence of signs and symptoms related to TMJ disorders in a group of young people with intelectual disability (ID) and a matched group of healthy adolescents. MATERIALS AND METHODS: A group of 105 young Special Olympics (SO) athletes (ID group) aged from 14 to 25 years and a control group were examined for the presence or absence of signs and symptoms of TMD through interview and clinical examination. RESULTS: A total of 64 young people with ID (61%) had at least one sign of TMD compared to 41 (39%) of the individuals screened that was free of any TMD symptoms. A significantly higher prevalence of TMJ sounds (palpation and stethoscope), TMJ tenderness, maximum vertical opening, headaches were observed among SO athletes compared to the healthy control group (p<0.05). A significant difference was recorded only for the Temporalis tenderness between the girls and boys (p<0.05). CONCLUSION: TMJ disorders are noticeable problem for intellectually disabled patients and a possible cause of pain that should be examined more in detail. We suggest that oral screening in people with a mental disability should be modified by including basic TMJ examination parameters in order to allow better understanding of the pathological aspects so as to address effective preventive and therapeutic measures.

Dental agenesis: genetic and clinical perspectives.

Dental agenesis is the most common developmental anomaly in humans and is frequently associated with several other oral abnormalities. Whereas the incidence of missing teeth may vary considerably depending on dentition, gender, and demographic or geographic profiles, distinct patterns of agenesis have been detected in the permanent dentition. These frequently involve the last teeth of a class to develop (I2, P2, M3) suggesting a possible link with evolutionary trends. Hypodontia can either occur as an isolated condition (non-syndromic hypodontia) involving one (80% of cases), a few (less than 10%) or many teeth (less than 1%), or can be associated with a systemic condition or syndrome (syndromic hypodontia), essentially reflecting the genetically and phenotypically heterogeneity of the condition. Based on our present knowledge of genes and transcription factors that are involved in tooth development, it is assumed that different phenotypic forms are caused by different genes involving different interacting molecular pathways, providing an explanation not only for the wide variety in agenesis patterns but also for associations of dental agenesis with other oral anomalies. At present, the list of genes involved in human non-syndromic hypodontia includes not only those encoding a signaling molecule (TGFA) and transcription factors (MSX1 and PAX9) that play critical roles during early craniofacial development, but also genes coding for a protein involved in canonical Wnt signaling (AXIN2), and a transmembrane receptor of fibroblast growth factors (FGFR1). Our objective was to review the current literature on the molecular mechanisms that are responsible for selective dental agenesis in humans and to present a detailed overview of syndromes with hypodontia and their causative genes. These new perspectives and future challenges in the field of identification of possible candidate genes involved in dental agenesis are discussed.

Percutaneous transluminal balloon angioplasty of stenotic standard Blalock-Taussig shunts: effect on choice of initial palliation in cyanotic congenital heart disease.

To date, attempted balloon dilation of stenotic standard Blalock-Taussig shunts has been largely disappointing. It has been suggested that this may be due to the use of balloons of insufficient diameter. Balloon dilation of stenotic Blalock-Taussig shunts was attempted with use of relatively large balloons in five patients (11 to 67 months old) with cyanotic heart disease who were becoming progressively cyanotic and polycythemic (hemoglobin 17.9 +/- 1.1 g/dl) because of discrete shunt stenosis at the site of pulmonary anastomosis. Balloon diameters selected were equal to or within 1 mm of the unobstructed proximal shunt diameter. Before balloon dilation the diameter at the site of the stenosis was 2.8 +/- 0.8 mm (range 1.7 to 4); after balloon dilation it was 5.7 +/- 1.1 mm (range 4.5 to 7.5). The diameter increased in all patients (range 2.0 to 3.5 mm); the mean increase was 2.8 +/- 0.2 mm (p less than 0.005). Expressed as a percent, the increase in diameter at the stenosis ranged from 80% to 182.4% (mean 108.2 +/- 16.8%). Before balloon dilation the systemic oxygen saturation was 72.8 +/- 9.2% (range 55% to 80%) and after balloon dilation it was 83.6 +/- 2.9% (range 80% to 87%). A satisfactory increase (range 6% to 25%) in blood oxygen saturation was seen in all patients; the mean increase was 10.8 +/- 3.2% (p less than 0.01). At follow-up, the oxygen saturation by pulse oximetry was 85.8 +/- 2.9% (mean 5.8 +/- 1.7 months after balloon dilation) and the hemoglobin was 15.6 +/- 1.9 g/dl (mean 6.6 +/- 1.5 months after balloon dilation).(ABSTRACT TRUNCATED AT 250 WORDS)

Validation of right ventricular volume measurements by magnetic resonance imaging in small hearts using a fetal lamb model.

RATIONALE AND OBJECTIVES: Cine-magnetic resonance (MR) imaging is established as an accurate method of determining cardiac ventricular volumes in adults but has not been validated for the smaller ventricular volumes found in infants. The purpose of the authors study was to evaluate the accuracy and reproducibility of MR imaging to measure small ventricle volumes. METHODS: The volume of silicone-rubber casts of the right ventricle of 11 fetal lamb hearts was measured by MR imaging using different imaging planes and slice section thicknesses and by water displacement. RESULTS: The ventricle volumes of the 11 hearts ranged from 0.45 to 3.00 mL. Accurate and reproducible values for the right ventricle volumes were obtained by MR imaging. Thin sections (3 mm) in the axial plane produced the best results. CONCLUSIONS: Based on studies in the nonmoving heart, MR imaging can accurately measure the small ventricular volumes expected in infants.

Effect of maturation on the fluoride release of resin-modified glass ionomer and polyacid-modified composite resin cements.

The effect of an early water contact on the fluoride release is studied for the resin-modified glass ionomer cements (RM-GIC) GC Lining LC, PhotacBond, Vitremer and Vitrebond and for the polyacid-modified composite resins (PAM-C) Variglass and Dyract. Six months fluoride release profiles were determined in regularly renewed water (37 degrees C), for the products directly after light curing and after 24 h maturation in a humid atmosphere (85% RH). ANOVA shows that both the short-term and the long-term fluoride release of a RM-GIC are influenced by this maturation. This indicates that direct water contact for this material should be avoided. For the RM-GIC a correlation is found between the initial fluoride release process and the long-term process. For the PAM-C materials, no differences in the fluoride release are found as a function of maturation, indicating that early water contact has no effect. The amounts of fluoride released by PAM-C are low compared to RM-GIC, which can affect their caries preventive potential. The results are explained on the basis of the setting reaction of both types of materials.

Effect of a neutral citrate solution on the fluoride release of resin-modified glass ionomer and polyacid-modified composite resin cements.

The effect of 0.01 mol/l citrate solution at pH = 7 on the fluoride release is compared for the resin-modified glass ionomer cements (RM-GIC) GC Lining LC, PhotacBond, Vitremer and Vitrebond and for the polyacid-modified composite resins (PAM-C) Variglass and Dyract by means of the six-month fluoride release profiles at 37 degrees C. The fluoride release of both RM-GIC and PAM-C increases in the neutral citrate solution as compared to water, which can be explained by the ability of citrate to complex metal ions and hence to degrade the glass as well as the polysalt matrix of the cement. Although RM-GIC release more fluoride than PAM-C in water as well as in citrate solution, the relative increase in fluoride release upon immersion in citrate solution is most pronounced for PAM-C. Whereas for the latter citrate affects both the short-term and long-term fluoride release, for RM-GIC only the long-term fluoride release is affected. This suggests that the action of citrate increases with decreasing importance of the polysalt formation in the hardening of the material. This could be explained on the basis of the difference in the chemical properties of the cement matrix.

Fluoride release process of (resin-modified) glass-ionomer cements versus (polyacid-modified) composite resins.

The fluoride release of conventional and resin-modified glass-ionomers is reviewed and compared to that of fluoride-releasing (polyacid-modified) composite resins. Each formulation displays a typical fluoride release profile. The cumulative amount of fluoride released is described by [F]c = [F](I)t/(t + t1/2) + beta square root t for glass ionomers whether resin-modified or not, whereas for composite resins this quantity is given by [F]c = [F](I)t/(t + t1/2) + alpha t. Both equations indicate that two kinetic processes are responsible for the fluoride release profiles. The kinetic parameters [F](I), t1/2, beta and alpha depend on the formulation. On the basis of the exchange characteristics for fluoride, an attempt is made to explain the mechanisms responsible for these fluoride release processes.

Staged repair of pentalogy of Cantrell with tetralogy of Fallot.

We report a successful two-stage repair of tetralogy of Fallot associated with pentalogy of Cantrell. The first stage, performed in the neonatal period, consisted of repairing the omphalocele, separating the peritoneal from the pericardial cavities, and covering the heart. The second stage, performed at 6 years of age, consisted of complete intracardiac repair and placing the heart in the chest. The patient is alive and well 18 months after the operation.

Optimizing cuff width for noninvasive measurement of blood pressure.

BACKGROUND: It is well established that indirect measurements of blood pressure made with a standard 13cm-wide cuff are erroneously high for large arms and low for small arms. To correct for this error, the American Heart Association recommends adjusting cuff width to 40% of the arm's circumference. OBJECTIVE: To test the validity of this method of correction. DESIGN: This study was a prospective, nonblinded, paired Student's t-test analysis. METHODS: Blood pressures in 50 subjects were measured directly by using a radial artery line and indirectly by the Korotkov method. For each subject multiple indirect measurements of blood pressure were made with the cuff width:arm circumference ratio varied from 30-55% in 5% increments. Error was defined as indirect blood pressure minus direct blood pressure. RESULTS: A ratio of 40% resulted in overestimation of blood pressure for most arms and with particularly high errors for small arms. The ratio producing zero mean error for the pooled study group was 46.4+/-0.7% (mean+/-SEM). Using this ratio of 46.4%, the error varied inversely with arm circumference (P<0.02), resulting in overestimation of systolic blood pressure for small arms and underestimation of systolic blood pressure for large arms. This error is comparable in magnitude, but opposite in sign, to that which occurs with a standard 13cm-wide cuff for all arms. The optimum ratio was found to be closely approximated by the relationship, cuff width=9.34 log(10) arm circumference. Using this relationship, error in systolic blood pressure was insensitive to arm circumference (r=0.04, P>0.05) and near zero. CONCLUSION: The optimum cuff width for the indirect measurement of blood pressure is not directly proportional to arm circumference, but is proportional to the logarithm of the arm's circumference.

Medical technology transfer: the inventor's perspective.

Technology transfer can be a difficult and frustrating experience for an inventor, one with a questionable outcome despite tremendous effort. A university-based inventor may find that there is a "technology transfer office" at his or her institution, but that it is poorly equipped to patent and license inventions. In such a case, the inventor may have to play a particularly active role in the patenting process and, especially, the marketing process. Furthermore, university-based inventors may find themselves caught up in issues of academic freedom and potential conflicts of interests. There are often no role models for entrepreneurial activity at a university, and as a result many inventors have had to leave their university positions to pursue financial gain from their inventions. When licensing inventions to companies, the "NIH syndrome" can be extremely frustrating. It is often difficult for the inventor to communicate his or her certain knowledge that the invention solves a specific problem perfectly. Also, an inventor may find that even if a company is interested and wishes to license the invention it may ultimately have little or no competence in the subject area and, as a result, the invention never finds its way to commercial production. Nonetheless, the rewards can be well worth the effort. If a successful license is reached and the device goes into production, there may be substantial personal financial reward for the inventor. If the university's patent policy is enlightened, a portion of the royalty income may support ongoing and future activities in the inventor's research laboratory.(ABSTRACT TRUNCATED AT 250 WORDS)

Literature review: Restorations of class II cavities in the primary dentition with compomers.

BACKGROUND: A large number of studies concerning the use of compomers in class II cavities in the primary dentition already exist, but the variety of the research perspectives is even bigger. AIM: This study therefore intends to abridge and evaluate the existing research through a systematic literature review. METHODS: In order to gather relevant articles an extended literature research was carried out. The criteria for the evaluation of the resulting articles were based on the article of Kilpatrick and Neumann [2007]. RESULTS: According to the subject of the research, the articles were divided into the following groups: PAM-C; PAM-C and amalgam; PAM-C and GIC; PAM-C and hybrid composites; PAM-C and pre-treatment. CONCLUSIONS: The findings lead to the conclusion that PAM-C can be an alternative to other restorative materials in the primary dentition in class II cavities, except in the case of teeth with pulpectomies or pulpotomies. The placement of compomers takes longer than placing amalgam, but the procedure consists of fewer steps compared to composites. However, patient-compliance remains essential.

Cranial suture biology and dental development: genetic and clinical perspectives.

Premature fusion of the calvarial bones at the sutures, or craniosynostosis (CS), is a relatively common birth defect (1:2000-3000) frequently associated with limb deformity. Patients with CS may present oral defects, such as cleft soft palate, hypodontia, hyperdontia, and delayed tooth eruption, but also unusual associations of major dental anomalies such as taurodontism, microdontia, multiple dens invaginatus, and dentin dysplasia. The list of genes that are involved in CS includes those coding for the different fibroblast growth factor receptors and a ligand of ephrin receptors, but also genes encoding transcription factors, such as MSX2 and TWIST. Most of these genes are equally involved in odontogenesis, providing a pausible explanation for clinical associations of CS with dental agenesis or tooth malformations. On the basis of the present knowledge on genes and transcription factors that are involved in craniofacial morphogenesis, and from dental clinics of CS syndromes, the molecular mechanisms that control suture formation and suture closure are expected to play key roles in patterning events and development of teeth. The purpose of this article is to review and merge the recent advances in the field of suture research at the genetic and cellular levels with those of tooth development, and to apply them to the dental clinics of CS syndromes. These new perspectives and future challenges in the field of both dental clinics and molecular genetics, more in particular the identification of possible candidate genes involved in both CS and dental defects, are discussed.

Review: finishing and polishing procedures of (resin-modified) glass ionomers and compomers in paediatric dentistry.

BACKGROUND: A smooth surface has a beneficial effect on the aesthetic quality and longevity of a dental restoration, as well as on its biocompatibility with oral tissues. In this review studies on glass-ionomer cements (GIC), resin-modified glass-ionomer cements (RM-GIC), and compomers or polyacid-modified resin composites (PAM-C) were assessed as these are currently used in paediatric dentistry. METHOD: Medline databases (USA National Library of Medicine) was searched using WinSpirs and Pubmed. This search used a keyword filter including dental materials, polishing procedures, and instrumentation including influencing factors. FINDINGS: Although the literature shows different commercially available tools it seems that the ideal polishing instrumentation in paediatric dentistry for GIC and compomers is not yet on the market. Furthermore, the constant development of dental materials and polishing products impose a need for continuous scientific research.

Dentinogenesis imperfecta associated with short stature, hearing loss and mental retardation: a new syndrome with autosomal recessive inheritance?

The follow-up history and oral findings in two brothers from consanguineous parents suggest that the association of dentinogenesis imperfecta (DI), delayed tooth eruption, mild mental retardation, proportionate short stature, sensorineural hearing loss and dysmorphic facies may represent a new syndrome with autosomal recessive inheritance. Histological examination of the dentin matrix of a permanent molar from one of the siblings reveals morphological similarities with defective dentinogenesis as presenting in patients affected with Osteogenesis Imperfecta (OI), a condition caused by deficiency of type I collagen. A number of radiographic and histological characteristics, however, are inconsistent with classical features of DI. These findings suggest that DI may imply greater genetical heterogeneity than currently assumed.

[Use of fluorides in children: recommendations of the European Academy for Pediatric Dentistry]. / Utilisation du fluor chez les enfants: recommandations de l'European Academy for Paediatric Dentistry (EAPD).

The European Academy of Paediatric Dentistry (EAPD) strongly endorses that fluoride use should be part of any preventive programme for the control of dental caries in children. Each child under the care of a dentist should have a carefully planned programme appropriate to the level of caries risk and age of each child. Such a preventive programme should be reevaluated at least every six or 12 months and changed according to the patient's risk and the improvement or not of his or her's overall health. It is the combination of the use of an appropriate fluoride toothpaste with good oral hygiene that is the key to good dental health. This policy document deals with guidelines for systemic use of fluorides, fluoride supplements, topical methods (varnishes, mouthrinses and gels) and toothpastes. Moreover some recommendations are given to toothpaste manufacturers.

Evaluation of magnetic resonance imaging in coarctation of the aorta: the importance of multiple imaging planes.

Coarctation of the aorta can be evaluated reliably and noninvasively by magnetic resonance imaging. However, the value of different imaging planes in the evaluation of restenosis or aneurysm has not previously been studied. Our purpose was to study the relative sensitivity for oblique coronal and oblique parasagittal magnetic resonance imaging to detect restenosis or aneurysm formation in children following surgical repair or balloon angioplasty of coarctation of the aorta. The study included magnetic resonance imaging studies in 27 children. Each exam included ECG gated, spin-echo imaging in oblique coronal and oblique parasagittal planes. Recoarctation was defined as a greater than 50% narrowing of the aorta. Aneurysms were defined as focal dilatation of the aorta in the region of coarctation 20% or greater than the adjacent aortic diameter. Recoarctation was detected in 11 children, but in both views in only five children. Aneurysms were detected in 15 children, but in both views in only three children. Recoarctation and aneurysm detection were both statistically more likely to be detected if oblique coronal and oblique parasagittal views were obtained, indicating that multiple imaging planes are necessary to completely evaluate magnetic resonance imaging of coarctation.