Highly Selective Ratiometric Sensors for Pb2+ Based on Luminescent Zn(II)-Coordination Polymers with Thiophenedicarboxylate. Crystal Structures and Spectroscopic Studies.

The development of luminescent coordination polymers for the selective sensing of Pb2+ in water constitutes an active area of research that impacts analytical, environmental, and inorganic chemistry. Herein, two novel water-stable 2D Zn-coordination polymers {[Zn2(H2O)2(tdc)2(bpy)]·(H2O)}n 1 and [Zn(tdc)(tmb)]n 2 (tdc = thiophenedicarboxylate; bpy = 4,4'-bipyridine and tmb = 4,4'-trimethylenebipyridine) were synthesized, structurally determined by single crystal X-ray diffraction, and studied in-depth as luminescent sensors for a series of cations (Ca2+, Mg2+, Mn2+, Fe2+, Co2+, Ni2+, Cu2+, Zn2+ Cd2+, Hg2+ and Pb2+) in 20% aqueous ethanol. These Zn-polymers possess photostability in 20% aqueous ethanol with a strong emission at 410 upon excitation at 330 nm and quantum yields of around Φ = 0.09. Under these conditions, Pb+2 can be efficiently sensed with polymer 2 through a fluorescent ratiometric response with selectivity over common interfering metal ions such as Cu2+, Cd2+ and Hg2+ in the micromolar concentration range (detection limit = 1.78 ± 10 µM). Such selectivity/affinity of Pb2+ over Hg2+ for luminescent chemosensors is still rare. On the basis of spectroscopic tools (1H NMR, far ATR-IR, PXRD), the X-ray crystal structure of 2, and Scanning Electron Microscopy with Energy-Dispersive X-ray Spectroscopic analysis, the ratiometric fluorescent response is proposed via an efficient metal-ion exchange driven through interactions between thiophenedicarboxylate rings and Pb2+ ions. The use of flexible luminescent Zn-coordination polymers as sensors for selective and direct detection of Pb2+ in aqueous media has been unexplored until now.

Oxy- and Chloroarylation Pathways in Gold-Mediated Cyclization of 2-Aminoaryl-3-arylpropargyl-benzenesulfonamides.

A one-pot diazotization/gold-mediated cyclization of 2-aminoaryl-3-arylpropargyl-benzenesulfonamides is described. After diazotization, Me2 SAuCl triggers an oxy- and/or chloroarylation of the alkyne moiety, resulting in the formation of 3-acylindoles and/or Z-3-(chloromethylene)indolines. Density Functional Theory (DFT) calculations show the significant energetic preference of both processes over an insertion pathway. Notably, a Z-3-(chloromethylene)indoline crystallized with [Cl-Au-Cl],- exhibiting Au⋅⋅⋅H-C short contacts.

Fluorescence Sensing of Monosaccharides by Bis-boronic Acids Derived from Quinolinium Dicarboxamides: Structural and Spectroscopic Studies.

Three new diboronic acid-substituted bisquinolinium salts were synthesized, structurally described by single-crystal X-ray diffraction, and studied in-depth as fluorescent receptors for six monosaccharides and two open-chain polyols in water at physiological pH. The dicationic pyridine-2,6-dicarboxamide-based receptors contain two N-quinolinium rings as the fluorescent units covalently linked to three different isomers of phenylboronic acid (ortho, 2; meta, 3; and para, 4) as chelating binding sites for polyols. Additions of glucose/fructose in the micromolar concentration range to receptors 2 and 3 induce significant fluorescence changes, but in the presence of arabinose, galactose, mannose, and xylose, only modest optical changes are observed. This optical change is attributed to a static photoinduced electron transfer mechanism. The meta-diboronic receptor 3 exhibited a high affinity/selectivity toward glucose (K = 3800 M-1) over other monosaccharides including common interfering species such as fructose and mannitol. Based on multiple spectroscopic tools, electrospray ionization high-resolution mass spectrometry, crystal structures, and density functional theory calculations, the binding mode between 3 and glucose is proposed as a 1:1 complex with the glucofuranose form involving a cooperative chelating diboronate binding. These results demonstrate the usefulness of a new set of cationic fluorescent diboronic acid receptors with a strong ability for optical recognition of glucose in the sub-millimolar concentration range.

Molecular Alumo- and Gallosilicate Hydrides Functionalized with Terminal M(NR2)3 and Bridging M(NR2)2 (M = Ti, Zr, Hf; R = Me, Et) Moieties.

A general synthetic strategy for the systematic synthesis of group 4 MIV heterometallic complexes LMIII(H)(µ-O)Si(µ-O)(OtBu)2}nMIV(NR2)4-n (L = {[HC{C(Me)N(2,6-iPr2C6H3)}2; MIII = Al or Ga; n = 1 or 2; MIV = Ti, Zr, Hf; R = Me, Et), based on alumo- or gallosilicate hydride ligands bearing a Si-OH moiety, is presented. The challenging isolation of these metalloligands involved two strategies. On the one hand, the acid-base reaction of LAlH2 with (HO)2Si(OtBu)2 yielded LAlH(µ-O)Si(OH)(OtBu)2 (1), while on the other hand, the oxidative addition of (HO)2Si(OtBu)2 to LGa produced the gallium analog (2). These metalloligands successfully stabilized two hydrogen atoms with different acid-base properties (MIII-H and SiO-H) in the same molecule. Reactivity studies between 1 and 2 and group 4 amides MIV(NR2)4 (MIV = Ti, Zr, Hf; R = Me, Et) and tuning the reactions conditions and stoichiometry led to isolation and structural characterization of heterometallic complexes 3-11 with a 1:1 or 2:1 metalloligand/MIV ratio. Notably, some of these molecular heterometallic silicate complexes stabilize for the first time terminal (O3Si-O-)MIV(NR2)3 moieties known from single-site silica-grafted species. Furthermore, the aluminum-containing heterometallic complexes possess Al-H vibrational energies similar to those reported for modified alumina surfaces, which makes them potentially suitable models for the proposed MIV species grafted onto silica/alumina surfaces with hydride and dihydride architectures.

Selective Luminescent Chemosensing of Chloride Based on a Cyclometalated Platinum(II) Complex in Water: Crystal Structures, Spectroscopic Studies, Extraction, and Bioimaging.

Selective anion sensing by luminescent chemosensors capable of operating in aqueous conditions is a central field of modern supramolecular chemistry that impacts analytical and biological chemistry. A cationic cyclometalated [Pt(N^C^N)NCCH3]OTf complex, 1 [N^C^N = 1,3-bis(1-(p-tolyl)-benzimidazol-2'-yl)benzene, OTf = triflate], was prepared, structurally described by single-crystal X-ray diffraction and studied in-depth as a luminescent chemosensor for anions in aqueous phase and solid state. A series of related neutral [Pt(N^C^N)X] complexes (X = Cl, 2; CN, 3 and I, 4) were formed readily upon treatment of 1 with the respective NaX salt in aqueous media and were described structurally by X-ray diffraction. Complex 1 is hydrostable with phosphorescent green emission originated by intraligand transitions, and [dyz(Pt) → π*(N^C^N)] charge transfer transitions, as evidenced by TD-DFT calculations and lifetime. Additions of halides, pseudohalides, oxyanions, and dicarboxylates to a neutral aqueous solution of 1 modified its green emission intensity with a pronounced affinity (K = 1.5 × 105 M-1) and turn-on signal toward Cl- within the micromolar concentration range. Pt complex 1 is two orders of magnitude more selective for Cl- than the other halides, CN- and basic oxyanions. Such Cl- affinity for a metal-based chemosensor in aqueous media is still rare. On the basis of X-ray crystallographic analysis and multiple spectroscopic tools (NMR, UV-vis, luminescence, MS, lifetimes) the origin of this selectivity hinges on the cooperative three-point recognition involving one coordination bond (Pt-Cl) and two convergent short C-H···Cl- contacts. This strong affinity and efficient optical response can be utilized in quantitative Cl- sensing in real samples and solid-liquid extractions. Additionally, chloro-Pt complex, 2 may be relevant to bioimaging as a marker for cell nuclei, as revealed by its emission within living cells and intracellular distribution by confocal microscopic studies. These results demonstrate the usefulness of the new water-stable luminescent Pt-N^C^N complexes as effective analytical tools in anion sensing and extraction agents.

Benzene and Borazine, so Different, yet so Similar: Insight from Experimental Charge Density Analysis.

Although benzene and borazine are isoelectronic and isostructural, they have very different electronic structures, mainly due to the polar nature of the B-N bond. Herein, we present an experimental study of the charge density distribution obtained from the multipole model formalism and Hirshfeld atom refinement (HAR) based on high-resolution X-ray diffraction data of borazine B3N3H6 (1) and B,B',B″-trichloroborazine (2) crystals. These data are compared to those obtained from HAR for benzene (4) and 1,3,5-trichlorobenzene (5) and further compared with values obtained from density functional theory calculations in the gas phase, where N,N',N″-trichloroborazine (3) was also included. The results confirm that, unlike benzene, borazines are only weakly aromatic with an island-like electronic delocalization within the B3N3 ring involving only the nitrogen atoms. Furthermore, delocalization indices and interacting quantum atom energy for bonded and non-bonded atoms were found to be highly suitable indicators capable of describing the origin of the discrepancies observed when the degree of aromaticity in 2 and 3 is evaluated using common aromaticity indices. Additionally, analysis of intermolecular interactions in the crystals brings further evidence of a weakly aromatic character of the borazines as it reveals surprising similarities between the crystal packing of borazine and benzene and also between B,B',B″-trichloroborazine and 1,3,5-trichlorobenzene.

Casiopeinas of Third Generations: Synthesis, Characterization, Cytotoxic Activity and Structure-Activity Relationships of Mixed Chelate Compounds with Bioactive Secondary Ligands.

Casiopeinas are a family of copper(II) coordination compounds that have shown an important antineoplastic effect and low toxicity in normal cells. These compounds induce death cells by apoptosis through a catalytic redox process with endogenous reducing agents. Further studies included a structural variation, improving the activity and selectivity in cancer cells or other targets. In the present work we report the third generation, which contains a bioactive monocharged secondary ligand, as well as the design, synthesis, characterization and antiproliferative activity, of sixteen new copper(II) coordination compounds with curcumin or dimethoxycurcumin as secondary ligands. All compounds were characterized by elemental analysis, FTIR, UV-Vis, magnetic susceptibility, mass spectra with MALDI-flight time, cyclic voltammetry, electron paramagnetic resonance (EPR) spectroscopy and X-ray diffraction. Crystallization of two complexes was achieved in dimethylsulfoxide (DMSO) with polar solvent, and crystal data demonstrated that a square-based or square-base pyramid geometry are possible. A 1:1:1 stoichiometry (diimine: copper: curcuminoid) ratio and the possibility of a nitrate ion as a counterion were supported. 1H, 13C NMR spectra were used for the ligands. A sulforhodamine B assay was used to evaluate the cytotoxicity effect against two human cancer cell lines, SKLU-1 and HeLa. Electronic descriptors and redox potential were obtained by DFT calculations. Structure-activity relationships are strongly determined by the redox potential (E1/2) of copper(II) and molar volume (V) of the complexes. These compounds can be used as a template to open a wide field of research both experimentally and theoretically.

Non-Covalent Interactions in the Biphenyl Crystal: Is the Planar Conformer a Transition State?

A combined experimental and theoretical study of the biphenyl (BP) crystal is presented. The X-ray diffraction data collected at 100 K were subjected to Hirshfeld atom and multipole refinements of the electron density, ρ(r). A theoretical exploration of the potential energy surface (PES) of the crystal was also carried out. This investigation challenges the common assumption that the planar structure of BP in the phase I crystal is an average of two twisted configurations in a double-well potential. The theoretical computations provide compelling evidence that this structure corresponds to a minimum on the PES hence to a stable molecular arrangement. Consistently, the experiment showed no evidence of positional or dynamic disorder. The intramolecular hydrogen-hydrogen bonds detected are not repulsive. The topological analysis of the experimental and theoretical ρ(r) reveals that both the intra- and intermolecular H⋅⋅⋅H and the C-H⋅⋅⋅π contacts stabilize the BP crystal.

Effect of the nO → π*C═O Interaction on the Conformational Preference of 1,3-Diketones: A Case Study of Riolozatrione Derivatives.

The cyclopropane ring-opening reaction of riolozatrione, a natural product obtained from Jatropha dioica, afforded a 2,2-disubstituted 1,3-cyclohexandione displaying an alkyl methyl ether group at position 5. The conformational analysis of this product showed a high preference for the trans-diaxial conformation in both solution and solid state. Such conformation was possible from the noncovalent intramolecular nX → π*C═O interactions (X = an element having an unshared electron pair), allowing the determination of the interaction energies. Since the nX → π*C═O interactions can be regarded as additive, the energy values ranged from 4.52 to 6.51 kcal mol-1 for each carbonyl group with a strong dependency on the interatomic distances. The rigorous analysis of the electron density in the topological theory of atoms in molecules framework clearly shows that the origin of O-C═O interactions are through the nO → π*C═O electron transfer mechanism. Such interactions are slightly weaker than a canonical hydrogen bond but seemingly stronger than a van der Waals interaction. This interaction must be considered as a stereoelectronic effect due the electronic transfer between the interacting groups, which are limited by their relative stereochemistry and can be represented by a bond-no bond interaction, causing the pyramidalization of the carbonyl, which is the charge acceptor group.

Hydroxy-neo-Clerodanes and 5,10-seco-neo-Clerodanes from Salvia decora.

Preliminary analysis of the mass spectrometric (MS) and NMR spectroscopic data of the primary fractions from the biologically active extract of Salvia decora revealed spectra that are characteristic for neo-clerodane-type diterpenoids. MS-guided isolation of the bioactive fractions led to the isolation of three new chemical entities, including two hydroxy-neo-clerodanes (1 and 2) and one acylated 5,10-seco-neo-clerodane (3), along with three known diterpenoids (4-6), ursolic acid (7), and eupatorin (8). The structures of the new compounds were established by analysis of the 1D and 2D NMR and MS data, whereas their absolute configuration was deduced using a combination of experimental and theoretical ECD data and confirmed by X-ray crystallography (1 and 4). Furthermore, compounds 1, 3, 4, and 6-8 were evaluated as hPTP1B1-400 (human protein tyrosine phosphatase) inhibitors, where 7 showed the best activity, with an IC50 value in the lower µM range. Additionally, compound 7 was evaluated as an α-glucosidase inhibitor. The affinity constant of the 7-hPTP1B1-400 complex was determined by quenching fluorescence experiments (ka = 1.3 × 104 M-1), while the stoichiometry ratio (1:1 protein-ligand) was determined by a continuous variation method.

Self-Assembly of Aluminum- and Gallium-Based meso-Metallaporphyrins.

The molecular meso-metallaporphyrin has been obtained from the reaction of AlMe3 with the bulky 4,5-(Ph2(HO)C)2-1,2,3-triazole (1). The presence of Al-Me groups coordinated to the triazole rings creates three different stereoisomers that were identified by single-crystal X-ray diffraction. Further studies revealed that, for steric reasons, only one of the two main stereoisomers is active in the polymerization of ε-caprolactone. When GaMe3 is used instead of AlMe3, a trimetallic species is formed instead of the meso-metallaporphyrin pointing to a metal-directed self-assembly. On the other hand, the reaction of the monolithium salt [{Li(THF)2}{κ2- N, N'-4,5-(Ph2(HO)C)-1,2,3-triazole}]2 (2; THF = tetrahydrofuran) with MCl3 (M = Al, Ga) yields meso-metallaporphyrin species with a lithium atom in the center of the metallacycle. While the gallium derivative is rather stable in solution, the aluminum analogue decomposes rapidly. In the solid state, continuous cationic columns running throughout the whole crystal are formed from alternating Li⊂[M]4 (M = Al, Ga) meso-metallaporphyrin and [Li(THF)4]+ cations. Density functional theory calculations determined that the weak Cl···H, H···H, N···H, and Cl···O interactions with a total interaction energy of -38.6 kcal·mol-1 are responsible for this unusual packing.

Structure and Absolute Configuration of Abietane Diterpenoids from Salvia clinopodioides: Antioxidant, Antiprotozoal, and Antipropulsive Activities.

The aerial parts of Salvia clinopodioides afforded abietanes 1a, 2a, and 3 (clinopodiolides A-C), two of which possess an unusual lactol moiety at C-19-C-20, together with an icetexane named clinopodiolide D (4a). Their structures were established by spectroscopic means, mainly 1H and 13C NMR, including 1D and 2D homo- and heteronuclear experiments. The antioxidant, antiprotozoal, and antidiarrheal effects of the isolates were evaluated. Compounds 2a and 3 showed better effects than α-tocopherol in the inhibition of lipid peroxidation with IC50 (µM) = 5.9 ± 0.1 and 2.7 ± 0.2, respectively, and moderate activity in the DPPH assay. All tested compounds showed moderate antiamoebic and antigiardial activity, as well as a good antipropulsive effect.

Bottleneck Effect of N,N-Dimethylformamide in InOF-1: Increasing CO2 Capture in Porous Coordination Polymers.

The bottleneck effect of confined N,N-dimethylformamide (DMF) molecules was observed in InOF-1 for the first time: CO2 capture was remarkably enhanced in samples of as-synthesized InOF-1, thermally activated in such a way that a small residual amount of DMF molecules remained confined within the pores (DMF@InOF-1). Dynamic CO2 adsorption experiments on DMF@InOF-1 exhibited a CO2 capture of 8.06 wt % [1.5-fold higher than that of a fully activated InOF-1 (5.24%)]. DMF@InOF-1 can reversibly adsorb/desorb 8.09% CO2 with no loss of CO2 capacity after 10 cycles, and the desorption is accomplished by only turning the CO2 flow off. Static CO2 adsorption experiments (at 196 K) demonstrated a 1.4-fold CO2 capture increase (from 5.5 mmol·g-1, fully activated InOF-1, to 7.5 mmol·g-1, DMF@InOF-1). Therefore, these CO2 capture properties are the result of the presence of residual-confined DMF molecules within the InOF-1 framework and their interactions via a very strong hydrogen bond with the In2(µ-OH) groups, which prevent DMF leaching. The stability of this hydrogen bond is given by a perfect fit of the DMF molecule in the "dent" around the OH group that allows a nearly ideal orientation of the DMF molecule towards the OH group.

Molecular Group 13 Metallaborates Derived from M-O-M Cleavage Promoted by BH3.

The reaction of metalloxanes [{MeLM(OH)}2(µ-O)] [M = Al (1), Ga (2); MeL = CH{CMe(NAr)}2-, Ar = 2,4,6-Me3C6H2, Me = methyl] with an excess of BH3·D (D = tetrahydrofuran (THF), SMe2) affords annular metallaborate systems achieved through M-O-M cleavage. Compound 1 led exclusively to the formation of eight-membered ring systems [{MeLAl(µ-O){B(OnBu)}(µ-O)}2] (3) and [{MeLAl(µ-O)(BH)(µ-O)}2] (6), while for 2 the unprecedented six-membered ring systems [{(MeLGa)2(µ-O)}(µ-O)2{B(OnBu)}] (4) and [(MeLGa)(µ-O)2{(BOnBu)2(µ-O)}] (5) were observed. The use of BH3·THF with 1 and 2 led to the concomitant THF ring-opening reaction, while with BH3·SMe2 in THF no such reaction was observed. The metallaborates [MeLAl{OB(pinacol)}(OH)] (7) and [{MeLGa(OB(pinacol))}2(µ-O)] (8) were synthesized from pinacolborane and the corresponding metalloxane, providing structural evidence that supports the reaction pathways proposed for the formation of 3-6. Density functional theory studies were performed on 3-5 to assess the effect of the metal exchange between aluminum and gallium atoms on the energy of the general ring structures.

Synthesis of Cyclic and Cage Borosilicates Based on Boronic Acids and Acetoxysilylalkoxides. Experimental and Computational Studies of the Stability Difference of Six- and Eight-Membered Rings.

A series of borosilicates was synthesized, where the structure of the borosilicate core was easily modulated using two strategies: blocking of condensation sites and controlling the stoichiometry of the reaction. Thus, on the one hand, the condensation of phenylboronic or 3-hydroxyphenylboronic acid with diacetoxysilylalkoxide [(tBuO)(Ph3CO)Si(OAc)2] led to the formation of borosilicates (tBuO)(Ph3CO)Si{(µ-O)BPh}2(µ-O) (1), [{(tBuO)(Ph3CO)Si(µ-O)BPh(µ-O)}2] (2), and [{(tBuO)(Ph3CO)Si(µ-O)B(3-HOPh)(µ-O)}2] (3) with a cyclic inorganic B2SiO3 or B2Si2O4 core, respectively. On the other hand, the reaction of phenylboronic acid with triacetoxysilylalkoxide (Ph3CO)Si(OAc)3 in 3:2 ratio resulted in the formation of a cagelike structure [{(Ph3CO)Si(µ-O)2BPh(µ-O)}2] (4) with B4Si4O10 core, while the reaction of the boronic acid with silicon tetraacetate generated an unusual 1,3-bis(acetate)-1,3-diphenyldiboraxane PhB(µ-O)(µ-O,O'-OAc)2BPh (5). Additionally, compound 1 was used to evaluate the possibility to form N→B donor-acceptor bond between the boron atom in the borosilicates and a nitrogen donor. Thus, coordination of 1 with piperazine yielded a tricyclic [{(tBuO)(Ph3CO)Si(OBPh)2(µ-O)}2·C4H10N2] compound 6 with two borosilicate rings bridged by a piperazine molecule. Finally, the processes involved in the formation of the six- and eight-membered rings (B2SiO3 and B2Si2O4) in compounds 1 and 2 were explored using solution 1H NMR studies and density functional theory calculations. These molecules represent to the best of our knowledge first examples of cyclic molecular borosilicates containing SiO4 units.

Taming the oxidative power of SeO(3) in 1,4-dioxane, isolation of two new isomers of mixed-valence selenium oxides, and two unprecedented cyclic esters of selenic acid.

The reaction of (SeO3)4 with 1,4-dioxane (diox, dioxane) with or without diluting solvent led to the isolation of the unprecedented esters of selenic acid-1,2-ethyl selenate (CH2O)2SeO2 and the glyoxal diselenate O2Se[(OCHO)2]SeO2. It was possible to isolate an unknown dimeric form of Se2O5 (Se4O10·(diox)2) and a geometrical isomer of the mixed-valence oxide trans-Se3O7, both stabilized by dioxane. The dioxane adduct of monomeric selenium trioxide SeO3·diox was obtained from the reaction of (SeO3)4 with dioxane in liquid SO2. The reaction mechanism for the formation of these compounds was elucidated, and the molecular structure of the unstable form of the selenium trioxide was determined, consisting in a trimeric arrangement (SeO3)3.

Crystal structure of N,N'-bis-[(pyridin-4-yl)meth-yl]naphthalene di-imide.

In the centrosymmetric title compound, C26H16N4O4 {systematic name: 6,13-bis-[(pyridin-4-yl)meth-yl]-6,13-di-aza-tetra-cyclo-[6.6.2.0(4,16)0(11,15)]hexa-deca-1,3,8,10,15-pantaene-5,7,12,14-tetrone}, the central ring system is essentially planar [maximum deviation = 0.0234 (8) Å] and approximately perpendicular to the terminal pyridine ring [dihedral angle = 84.38 (3)°]. The mol-ecules displays a trans conformation with the (pyridin-4-yl)methyl groups on both sides of the central naphthalene di-imide plane. In the crystal, mol-ecules are linked by π-π stacking between parallel pyridine rings [centroid-centroid distances = 3.7014 (8) and 3.8553 (8) Å] and weak C-H⋯O hydrogen bonds, forming a three-dimensional supra-molecular architecture.

Tri-fluoro-methane-sulfonate salt of 5,10,15,20-tetra-kis-(1-benzyl-pyridin-1-ium-4-yl)-21H,23H-porphyrin and its CaII complex.

The synthesis, crystallization and characterization of a tri-fluoro-methane-sulfonate salt of 5,10,15,20-tetra-kis-(1-benzyl-pyridin-1-ium-4-yl)-21H,23H-por-phy-rin, C68H54N8 4+·4CF3SO3 -·4H2O, 1·OTf, are reported in this work. The reaction between 5,10,15,20-tetra-kis-(pyridin-4-yl)-21H,23H-porphyrin and benzyl bromide in the presence of 0.1 equiv. of Ca(OH)2 in CH3CN under reflux with an N2 atmosphere and subsequent treatment with silver tri-fluoro-methane-sulfonate (AgOTf) salt produced a red-brown solution. This reaction mixture was filtered and the solvent was allowed to evaporate at room temperature for 3 d to give 1·OTf. Crystal structure determination by single-crystal X-ray diffraction (SCXD) revealed that 1·OTf crystallizes in the space group P21/c. The asymmetric unit contains half a porphyrin mol-ecule, two tri-fluoro-methane-sulfonate anions and two water mol-ecules of crystallization. The macrocycle of tetra-pyrrole moieties is planar and unexpectedly it has coordinated CaII ions in occupational disorder. This CaII ion has only 10% occupancy (C72H61.80Ca0.10F12N8O16S4). The pyridinium rings bonded to methyl-ene groups from porphyrin are located in two different arrangements in almost orthogonal positions between the plane formed by the porphyrin and the pyridinium rings. The crystal structure features cation⋯π inter-actions between the CaII atom and the π-system of the phenyl ring of neighboring mol-ecules. Both tri-fluoro-methane-sulfonate anions are found at the periphery of 1, forming hydrogen bonds with water mol-ecules.

Synthesis of organotin(IV) heterocycles containing a xanthenyl group by a Barbier approach via ultrasound activation: synthesis, crystal structure and Hirshfeld surface analysis.

A series of organotin heterocycles of general formula [{Me2C(C6H3CH2)2O}SnR2] [R = methyl (Me, 4), n-butyl (n-Bu, 5), benzyl (Bn, 6) and phenyl (Ph, 7)] was easily synthesized by a Barbier-type reaction assisted by the sonochemical activation of metallic magnesium. The 119Sn{1H} NMR data for all four compounds confirm the presence of a central Sn atom in a four-coordinated environment in solution. Single-crystal X-ray diffraction studies for 17,17-dimethyl-7,7-diphenyl-15-oxa-7-stannatetracyclo[11.3.1.05,16.09,14]heptadeca-1,3,5(16),9(14),10,12-hexaene, [Sn(C6H5)2(C17H16O)], 7, at 100 and 295 K confirmed the formation of a mononuclear eight-membered heterocycle, with a conformation depicted as boat-chair, resulting in a weak Sn...O interaction. The Sn and O atoms are surrounded by hydrophobic C-H bonds. A Hirshfeld surface analysis of 7 showed that the eight-membered heterocycles are linked by weak C-H...π, π-π and H...H noncovalent interactions. The pairwise interaction energies showed that the cohesion between the heterocycles are mainly due to dispersion forces.

Using cocrystals as a tool to study non-crystallizing molecules: crystal structure, Hirshfeld surface analysis and computational study of the 1:1 cocrystal of (E)-N-(3,4-difluorophenyl)-1-(pyridin-4-yl)methanimine and acetic acid.

Using a 1:1 cocrystal of (E)-N-(3,4-difluorophenyl)-1-(pyridin-4-yl)methanimine with acetic acid, C12H8F2N2·C2H4O2, we investigate the influence of F atoms introduced to the aromatic ring on promoting π-π interactions. The cocrystal crystallizes in the triclinic space group P1. Through crystallographic analysis and computational studies, we reveal the molecular arrangement within this cocrystal, demonstrating the presence of hydrogen bonding between the acetic acid molecule and the pyridyl group, along with π-π interactions between the aromatic rings. Our findings highlight the importance of F atoms in promoting π-π interactions without necessitating full halogenation of the aromatic ring.