Short-term results of the uncemented triathlon total knee arthroplasty: a large cohort single-centre comparative study.

BACKGROUND: The purpose of this study is to assess the short-term survivorship of a new uncemented TKA design in a high-volume centre to evaluate the safety of this design prior to widespread adoption. METHODS: We performed a retrospective cohort study of all primary TKAs (cemented and uncemented) between May 2018 and May 2019. Primary outcome variables included aseptic revision, all-cause revision, time to revision, operative time and radiological outcomes. Predictor variables considered included age, gender, BMI, ASA, implant type (cruciate-retaining, posterior-stabilised or totally-stabilised) and the use of cemented or uncemented implants. RESULTS: There were 300 cemented TKAs and 249 uncemented TKAs (Triathlon, Stryker Inc., Mahwah, NJ) implanted. The mean follow-up for all cases was 31.6 months (minimum follow-up 2 years). Of the entire 549 implants only 4 were revised. Two of these were for infection, 1 was for patellar maltracking and 1 was for knee stiffness. All 4 revisions occurred in the cemented cohort. The aseptic revision rate in the cemented cohort was 0.7% compared to 0.0% in the uncemented cohort (p = 0.298). Operative times were significantly reduced in the uncemented cohort from 57.9 to 51.7 min (p < 0.001). There were 8/300 (2.6%) patients with RLLs in the cemented cohort and 4/249 (1.6%) patients with RLLs in the uncemented cohort (p = 0.56). CONCLUSION: The uncemented Triathlon TKA demonstrates excellent survivorship at short-term follow-up when compared to the cemented Triathlon TKA, thus eliminating any potential clinical concerns with this novel implant in the early post-operative phase.

Highly cross-linked polyethylene (HXLPE) is equivalent to conventional polyethylene (CPE) in total knee arthroplasty: A systematic review and meta-analysis.

BACKGROUND: The benefits of HXLPE in total knee arthroplasty (TKA) have not been as evident as total hip arthroplasty (THA). A systematic review and meta-analysis to assess the impact of highly-crosslinked polyethylene (HXLPE) on TKA outcomes compared to conventional polyethylene (CPE) is described. METHODS: All studies comparing HXLPE with CPE for primary TKA were included for analysis. The minimum dataset included revision rates, indication for revision, aseptic component loosening and follow-up time. The primary outcome variables were all-cause revision, aseptic revision, revision for loosening, radiographic component loosening, osteolysis and incidence of radiolucent lines. Secondary outcome measures included postoperative functional knee scores. A random-effects meta-analysis allowing for all missing data was performed for all primary outcome variables. RESULTS: Six studies met the inclusion criteria. In total, there were 2,234 knees (1,105 HXLPE and 1,129 CPE). The combined mean follow-up for all studies was 6 years. The aseptic revision rate in the HXLPE group was 1.02% compared to 1.97% in the CPE group. There was no difference in the rate of all-cause revision (p = 0.131), aseptic revision (p = 0.298) or revision for component loosening (p = 0.206) between the two groups. Radiographic loosening (p = 0.200), radiolucent lines (p = 0.123) and osteolysis (p = 0.604) was similar between both groups. Functional outcomes were similar between groups. CONCLUSION: The use of HXLPE in TKA yields similar results for clinical and radiographic outcomes when compared to CPE at midterm follow-up. HXLPE does not confer the same advantages to TKA as seen in THA.

Computed tomography topographic mapping of subchondral density (CT-TOMASD) in osteoarthritic and normal knees: methodological development and preliminary findings.

OBJECTIVES: To develop a precise imaging tool which measures three-dimensional (3D) subchondral bone mineral density (BMD), and investigate its ability to distinguish subchondral bone properties in osteoarthritic and normal cadaveric tibiae. METHODS: We developed a novel imaging tool [Computed tomography topographic mapping of subchondral density (CT-TOMASD)], which employs a surface projection image processing technique to map 3D subchondral BMD measured in relation to depth from the joint surface. Sixteen intact cadaver knees from 10 donors (8M:2F; age: 77.8+/-7.4) were scanned using quantitative computed tomography (QCT). Projections of average BMD to normalized depths of 2.5mm and 5.0mm were acquired, with regional analyses including: (1) medial and lateral BMD, (2) anterior/central/posterior compartmental BMD, (3) max BMD contained within a 10mm diameter 'core', and (4) medial:lateral BMD ratio. Precision was assessed using coefficients of variation (CV%). Osteoarthritis (OA) severity was assessed by examination of computed tomography (CT) and fluoroscopic radiographic images, and categorized using modified Kellgren-Lawrence (mKL) scoring. RESULTS: Precision errors for CT-TOMASD BMD measures were focused around 1.5%, reaching a maximum CV% of 3.5%. OA was identified in eight compartments of six knees. Substantial qualitative and quantitative differences were observed between the OA and normal knees, with the medial:lateral BMD ratio and peak core regional analyses demonstrating differences greater than 4.7 standard deviations (SDs) when compared with normals. Preliminary results revealed effect sizes ranging from 1.6 to 4.3 between OA and normal knees. CONCLUSIONS: CT-TOMASD offers precise 3D measures of subchondral BMD. Preliminary results demonstrate large qualitative and quantitative differences and large effect sizes between OA and normal knees. This method has the potential to identify and quantify changes in subchondral BMD associated with OA disease progression.

Can the Oxford Knee and Hip Score identify patients who do not require total knee or hip arthroplasty?

AIMS: The aim of this study was to determine if the Oxford Knee and Hip Score (OKHS) can accurately predict when a primary knee or hip referral is deemed nonsurgical versus surgical by the surgeon during their first consultation, and to identify nonsurgical OKHS screening thresholds. PATIENTS AND METHODS: We retrospectively reviewed pre-consultation OKHS for all consecutive primary total knee arthroplasty (TKA) and total hip arthroplasty (THA) consultations of a single surgeon over three years. The 1436 knees (1016 patients) and 478 hips (388 patients) included were categorized based on the surgeon's decision into those offered surgery during the first consultation versus those not (nonsurgical). Spearman's rank correlation coefficients and receiver operating characteristic (ROC) curve analysis were performed. RESULTS: Oxford Scores were better for the nonsurgical cohorts (p < 0.001) and correlated with the surgical decision (p < 0.001). ROC area under the curve values for knees (0.83, 95% confidence intervals (CI) 0.81 to 0.85) and hips (0.87, 95% CI 0.84 to 0.91) were excellent. A conservative and effective threshold for knees is Oxford Knee Score (OKS) > 32 points (sensitivity = 0.997, negative predictive value (NPV) = 0.992) and for hips is Oxford Hip Score (OHS) > 34 points (sensitivity = 0.997, NPV = 0.978). Severable potential lower OKHS thresholds were identified. CONCLUSION: Pre-consultation OKHS demonstrate good ability to predict when a primary TKA or THA referral will be deemed nonsurgical in a single surgeon's practice. Multiple OKHS thresholds can effectively screen out nonsurgical referrals. Cite this article: Bone Joint J 2019;101-B(6 Supple B):23-30.

Long-term results of tripolar constrained total hip arthroplasty in revision hip arthroplasty: a minimum follow-up of ten years.

AIMS: We investigated the long-term performance of the Tripolar Trident acetabular component used for recurrent dislocation in revision total hip arthroplasty. We assessed: 1) rate of re-dislocation; 2) incidence of complications requiring re-operation; and 3) Western Ontario and McMaster Universities osteoarthritis index (WOMAC) pain and functional scores. PATIENTS AND METHODS: We retrospectively identified 111 patients who had 113 revision tripolar constrained liners between 1994 and 2008. All patients had undergone revision hip arthroplasty before the constrained liner was used: 13 after the first revision, 17 after the second, 38 after the third, and 45 after more than three revisions. A total of 75 hips (73 patients) were treated with Tripolar liners due to recurrent instability with abductor deficiency, In addition, six patients had associated cerebral palsy, four had poliomyelitis, two had multiple sclerosis, two had spina bifida, two had spondyloepiphyseal dysplasia, one had previous reversal of an arthrodesis, and 21 had proximal femoral replacements. The mean age of patients at time of Tripolar insertions was 72 years (53 to 89); there were 69 female patients (two bilateral) and 42 male patients. All patients were followed up for a mean of 15 years (10 to 24). Overall, 55 patients (57 hips) died between April 2011 and February 2018, at a mean of 167 months (122 to 217) following their tripolar liner implantation. We extracted demographics, implant data, rate of dislocations, and incidence of other complications. RESULTS: At ten years, the Kaplan-Meier survivorship for dislocation was 95.6% (95% confidence interval (CI) 90 to 98), with 101 patients at risk. At 20 years, the survivorship for dislocation was 90.6% (95% CI 81.0 to 95.5), with one patient at risk. Eight patients (7.2%) had a dislocation of their constrained liners. At ten years, the survival to any event was 89.4% (95% CI 82 to 93.8), with 96 patients at risk. At 20 years, the survival to any event was 82.5% (95% CI 71.9 to 89.3), with one patient at risk. Five hips (4.4%) had deep infection. Two patients (1.8%) developed dissociated constraining rings with pain but without dislocation, which required re-operation. Two patients (1.8%) had periprosthetic femoral fractures, without dislocation, that were treated by revision stems along with exchange of the well-functioning constrained liners. CONCLUSION: Constrained tripolar liners used at revision hip arthroplasty provided favourable results in the long term for treatment of recurrent dislocation and for patients at high risk of dislocation. Cite this article: Bone Joint J 2019;101-B(6 Supple B):123-126.

Intraoperative vs. weightbearing patellar kinematics in total knee arthroplasty: a cadaveric study.

BACKGROUND: During knee replacement surgery, surgeons optimize intraoperative patellar tracking with the aim of optimizing postoperative tracking. This link has not been investigated to date. Our research questions were: (1) How well do patellar kinematics correlate between passive and weightbearing flexion across numerous changes in component placement? (2) How do the kinematics differ between the two loading configurations? METHODS: Eight cadaveric knee joints with modified knee components that allowed 11 different femoral, tibial and patellar placements were tested in two experimental rigs simulating intraoperative and weightbearing dynamic flexion. Baseline placement had all components in neutral position. Pearson correlation coefficients were calculated for absolute baseline kinematics and for relative kinematics due to changes in component position (i.e., the 10 altered positions vs. baseline). FINDINGS: Correlations between intraoperative and weightbearing rigs for absolute baseline kinematics were unpredictable, ranging from poor to excellent (mean 0.56 for tilt and mean 0.50 for shift). Correlations between rigs for changes in tilt and shift, i.e. relative kinematics, were strong (>0.8) or very strong (>0.9), with the exception of shift in early flexion (0.54). Differences in relative kinematics, which averaged 2.2 degrees in tilt (standard deviation 1.8 degrees ) and 1.6mm in shift (standard deviation 1.7mm), were notably smaller and less variable than differences in absolute kinematics, which averaged 4.2 degrees in tilt (standard deviation 3.6 degrees ) and 4.3mm in shift (standard deviation 3.9mm). INTERPRETATION: The results of this study suggest that, while absolute kinematics may differ between conditions, if a surgeon adjusts a component position to improve patellar kinematics intraoperatively, the effects of such a geometric change will likely carry through to the postoperative joint.

Determinants of patellar tracking in total knee arthroplasty.

BACKGROUND: Optimizing patellar tracking in total knee arthroplasty is a surgical priority. Despite this, a comparison of the effects of different component placements on patellar tracking is not available; the biomechanical impact of the patellar resection angle has not been studied; and the similarity between intraoperative and postoperative effects, fundamental to improving patellar tracking, is unknown. Our objective was to compare the impact of the major controllable femoral, tibial and patellar component positions on patellar kinematics during both passive and loaded flexion. METHODS: We tested eight cadaveric knee specimens in two rigs, simulating intraoperative and weightbearing flexion. Optoelectronic marker arrays were attached to the femur, tibia and patella to record kinematics throughout the range of motion. We modified posterior-stabilized fixed-bearing knee components to allow for five types of variations in component placement in addition to the neutral position: femoral component rotation, tibial component rotation, patellar resection angle, patellar component medialization and additional patellar thickness, for a total of 11 individual variations. FINDINGS: The major determinants of patellar tilt and shift were patellar component medialization, patellar resection angle and femoral component rotation. The relative order of these variables depended on the structure (bone or component), kinematic parameter (tilt or shift) and flexion angle (early or late flexion). Effects of component changes were consistent between the intraoperative and weightbearing rigs. INTERPRETATION: To improve patellar tracking, and thereby the clinical outcome, surgeons should focus on patellar component medialization, patellar resection angle and femoral component rotation. These have been linked with anterior knee pain as well. Neither tibial component rotation nor patellar thickness should be adjusted to improve patellar tracking.

Revision for adverse local tissue reaction following metal-on-polyethylene total hip arthroplasty is associated with a high risk of early major complications.

Aims: Fretting and corrosion at the modular head/neck junction, known as trunnionosis, in total hip arthroplasty (THA) is a cause of adverse reaction to metal debris (ARMD). We describe the outcome of revision of metal-on-polyethylene (MoP) THA for ARMD due to trunnionosis with emphasis on the risk of major complications. Patients and Methods: A total of 36 patients with a MoP THA who underwent revision for ARMD due to trunnionosis were identified. Three were excluded as their revision had been to another metal head. The remaining 33 were revised to a ceramic head with a titanium sleeve. We describe the presentation, revision findings, and risk of complications in these patients. Results: The patients presented with pain, swelling, stiffness, or instability and an inflammatory mass was confirmed radiologically. Macroscopic material deposition on the trunnion was seen in all patients, associated with ARMD. Following revision, six (18.2%) dislocated, requiring further revision in four. Three (9.1%) developed a deep infection and six (18.2%) had significant persistent pain without an obvious cause. One developed a femoral artery thrombosis after excision of an iliofemoral pseudotumor, requiring a thrombectomy. Conclusion: The risk of serious complications following revision MoP THA for ARMD associated with trunnionosis is high. In the presence of extensive tissue damage, a constrained liner or dual mobility construct is recommended in these patients. Cite this article: Bone Joint J 2018;100-B:720-4.

Middle East and North Africa consensus on osteoporosis.

With the increasing life expectancy, osteoporosis is becoming a major worldwide health problem. The magnitude of the disease may become larger in developing countries, more particularly in the Middle East region where the prevalence of low bone mass is higher than in western countries. Although several local organizations and countries have developed guidelines for osteoporosis, no previous regional guidelines have been developed encompassing all Middle-Eastern and North African countries. The present document reviews all the regional published data on bone mineral density, risk factors, fracture prevalence and vitamin D status. It also gives simple recommendations applicable to all these countries. This document was endorsed by leading members of all the different regional countries including, Iran, Egypt, Tunisia, Jordan, Palestine, Syria, Iraq, Libya, Oman, Kuwait, Saudi Arabia and Bahrain.

Predictors of quality of life outcomes after revision total hip replacement.

A prospective cohort of 222 patients who underwent revision hip replacement between April 2001 and March 2004 was evaluated to determine predictors of function, pain and activity level between one and two years post-operatively, and to define quality of life outcomes using validated patient reported outcome tools. Predictive models were developed and proportional odds regression analyses were performed to identify factors that predict quality of life outcomes at one and two years post-operatively. The dependent outcome variables were the Western Ontario and McMaster Osteoarthritis Index (WOMAC) function and pain scores, and University of California Los Angeles activity scores. The independent variables included patient demographics, operative factors, and objective quality of life parameters, including pre-operative WOMAC, and the Short Form-12 mental component score. There was a significant improvement (t-test, p < 0.001) in all patient quality of life scores. In the predictive model, factors predictive of improved function (original regression analyses, p < 0.05) included a higher pre-operative WOMAC function score (p < 0.001), age between 60 and 70 years (p < 0.037), male gender (p = 0.017), lower Charnley class (p < 0.001) and aseptic loosening being the indication for revision (p < 0.003). Using the WOMAC pain score as an outcome variable, factors predictive of improvement included the pre-operative WOMAC function score (p = 0.001), age between 60 and 70 years (p = 0.004), male gender (p = 0.005), lower Charnley class (p = 0.001) and no previous revision procedure (p = 0.023). The pre-operative WOMAC function score (p = 0.001), the indication for the operation (p = 0.007), and the operating surgeon (p = 0.008) were significant predictors of the activity assessment at follow-up. Predictors of quality of life outcomes after revision hip replacement were established. Although some patient-specific and surgery-specific variables were important, age, gender, Charnley class and pre-operative WOMAC function score had the most robust associations with outcome.

Cement penetration and primary stability of the femoral component after impaction allografting. A biomechanical study in the cadaveric femur.

This study explored the relationship between the initial stability of the femoral component and penetration of cement into the graft bed following impaction allografting. Impaction allografting was carried out in human cadaveric femurs. In one group the cement was pressurised conventionally but in the other it was not pressurised. Migration and micromotion of the implant were measured under simulated walking loads. The specimens were then cross-sectioned and penetration of the cement measured. Around the distal half of the implant we found approximately 70% and 40% of contact of the cement with the endosteum in the pressure and no-pressure groups, respectively. The distal migration/micromotion, and valgus/varus migration were significantly higher in the no-pressure group than in that subjected to pressure. These motion components correlated negatively with the mean area of cement and its contact with the endosteum. The presence of cement at the endosteum appears to play an important role in the initial stability of the implant following impaction allografting.

Comparative repeatability of guide-pin axis positioning in computer-assisted and manual femoral head resurfacing arthroplasty.

The orientation of the femoral component in hip resurfacing arthroplasty affects the likelihood of loosening and fracture. Computer-assisted surgery has been shown to improve significantly the surgeon's ability to achieve a desired position and orientation; nevertheless, both bias and variability in positioning remain and can potentially be improved. The authors recently developed a computer-assisted surgical (CAS) technique to guide the placement of the pin used in femoral head resurfacing arthroplasty and showed that it produced significantly less variation than a typical manual technique in varus/valgus placement relative to a preoperatively determined surgical plan while taking a comparable amount of time. In the present study, the repeatability of both the CAS and manual techniques is evaluated in order to estimate the relative contributions to overall variability of surgical technique (CAS versus manual), surgeon experience (novice versus experienced), and other sources of variability (e.g. across specimens and across surgeons). This will enable further improvements in the accuracy of CAS techniques. Three residents/fellows new to femoral head resurfacing and three experienced hip arthroplasty surgeons performed 20-30 repetitions of each of the CAS and manual techniques on at least one of four cadaveric femur specimens. The CAS system had markedly better repeatability (1.2 degrees) in varus/valgus placement relative to the manual technique (2.8 degrees), slightly worse repeatability in version (4.4 degrees versus 3.2 degrees), markedly better repeatability in mid-neck placement (0.7 mm versus 2.5 mm), no significant dependence on surgeon skill level (in contrast to the manual technique), and took significantly less time (50 s versus 123 s). Proposed improvements to the version measurement process showed potential for reducing the standard deviation by almost two thirds. This study supports the use of CAS for femoral head resurfacing as it is quicker than the manual technique, independent of surgeon experience, and demonstrates improved repeatability.

Apelin signalling: a promising pathway from cloning to pharmacology.

The discovery of new signalling pathways is always followed by the development of pharmacological agents as drugs that can be used in the treatment of diseases resulting from a dysfunction of the signalling pathway in question. Apelin signalling plays a role in the central and peripheral regulation of the cardiovascular system, in water and food intake, and possibly in immune function. Up-regulation of ligand and receptor is also associated with pathophysiological states such as cardiac dysfunction and neovascularisation. Finally, the apelin receptor is a coreceptor for the entry of several HIV-1 and SIV strains. In view of these features, the apelin receptor constitutes a very interesting target for the design of new drugs for treating the prime causes of human mortality.

Modular tapered titanium stems in revision arthroplasty of the hip: The Risk and Causes of Stem Fracture.

Tapered fluted titanium stems are increasingly used for femoral revision arthroplasty. They are available in modular and non-modular forms. Modularity has advantages when the bone loss is severe, the proximal femur is mis shapen or the surgeon is unfamiliar with the implant, but it introduces the risk of fracture of the stem at the junction between it and the proximal body segment. For that reason, and while awaiting intermediate-term results of more recently introduced designs of this junction, non-modularity has attracted attention, at least for straightforward revision cases. We review the risks and causes of fracture of tapered titanium modular revision stems and present an argument in favour of the more selective use of modular designs.

Porous tantalum uncemented acetabular components in revision total hip arthroplasty: a minimum ten-year clinical, radiological and quality of life outcome study.

AIMS: Reconstruction of the acetabulum after failed total hip arthroplasty (THA) can be a surgical challenge in the presence of severe bone loss. We report the long-term survival of a porous tantalum revision acetabular component, its radiological appearance and quality of life outcomes. PATIENTS AND METHODS: We reviewed the results of 46 patients who had undergone revision of a failed acetabular component with a Paprosky II or III bone defect and reconstruction with a hemispherical, tantalum acetabular component, supplementary screws and a cemented polyethylene liner. RESULTS: After a minimum follow-up of ten years (ten to 12), the survivorship of the porous tantalum acetabular component was 96%, with further revision of the acetabular component as the end point. The ten-year survivorship, with hip revision for any reason as the end point, was 92%. We noted excellent pain relief (mean Western Ontario and McMaster Universities Arthritis Index (WOMAC) score pain 92.6, (40 to 100)) and good functional outcomes (mean WOMAC function 90.3 (30.9 to 100), mean University of California Los Angeles activity scale 5 (2 to 10)) and generic quality of life measures (mean Short Form-12 (SF-12) physical component 48.3 (18.1 to 56.8), mean SF-12 mental component 56.7 (32.9 to 70.3)). Patient satisfaction with pain relief, function and return to recreational activities were excellent. TAKE HOME MESSAGE: Uncemented acetabular reconstruction using a tantalum acetabular component gives excellent clinical and quality of life outcomes at a minimum follow-up of ten years. Cite this article: Bone Joint J 2016;98-B:767-71.

Periprosthetic fractures associated with total knee arthroplasty: an update.

Fractures around total knee arthroplasties pose a significant surgical challenge. Most can be managed with osteosynthesis and salvage of the replacement. The techniques of fixation of these fractures and revision surgery have evolved and so has the assessment of outcome. This specialty update summarises the current evidence for the classification, methods of fixation, revision surgery and outcomes of the management of periprosthetic fractures associated with total knee arthroplasty. Cite this article: Bone Joint J 2016;98-B:1489-96.

Delayed dislocation following metal-on-polyethylene arthroplasty of the hip due to 'silent' trunnion corrosion.

AIMS: We present a case series of ten metal-on-polyethylene total hip arthroplasties (MoP THAs) with delayed dislocation associated with unrecognised adverse local tissue reaction due to corrosion at the trunnion and pseudotumour formation. METHODS: The diagnosis was not suspected in nine of the ten patients (six female/four male; mean age 66 years), despite treatment in a specialist unit (mean time from index surgery to revision was 58 months, 36 to 84). It was identified at revision surgery and subsequently confirmed by histological examination of resected tissue. Pre-operative assessment and culture results ruled out infection. A variety of treatment strategies were used, including resection of the pseudotumour and efforts to avoid recurrent dislocation. RESULTS: The rate of complications was high and included three deep infections, two patients with recurrent dislocation, and one recurrent pseudotumour. CONCLUSION: This series (mean follow-up of 76 months following index procedure and 19 months following revision THA) demonstrates that pseudotumour is an infrequent but important contributor to delayed instability following MoP THA. It is easy to overlook in the differential diagnosis, especially if the alignment of the components is less than optimal, leading to an assumption that malalignment is the cause of the dislocation. The instability is likely to be multifactorial and the revision surgery is complex. TAKE HOME MESSAGE: Due to the high complication rate associated with revision in this cohort, the diagnosis should be borne in mind when counselling patients regarding the risks of revision surgery.

Apelin receptors: From signaling to antidiabetic strategy.

The G protein-coupled receptor APJ and its cognate ligand, apelin, are widely expressed throughout human body. They are implicated in different key physiological processes such as angiogenesis, cardiovascular functions, fluid homeostasis and energy metabolism regulation. On the other hand, this couple ligand-receptor is also involved in the development and progression of different pathologies including diabetes, obesity, cardiovascular disease and cancer. Recently, a new endogenous peptidic ligand of APJ, named Elabela/Toddler, has been identified and shown to play a crucial role in embryonic development. Whereas nothing is yet known regarding Elabela/Toddler functions in adulthood, apelin has been extensively described as a beneficial adipokine regarding to glucose and lipid metabolism and is endowed with anti-diabetic and anti-obesity properties. Indeed, there is a growing body of evidence supporting apelin signaling as a novel promising therapeutic target for metabolic disorders (obesity, type 2 diabetes). In this review, we provide an overview of the pharmacological properties of APJ and its endogenous ligands. We also report the activity of peptidic and non-peptidic agonists and antagonists targeting APJ described in the literature. Finally, we highlight the important role of this signaling pathway in the control of energy metabolism at the peripheral level and in the central nervous system in both physiological conditions and during obesity or diabetes.

Adverse local tissue reactions in metal-on-polyethylene total hip arthroplasty due to trunnion corrosion: the risk of misdiagnosis.

Adverse reaction to wear and corrosion debris is a cause for concern in total hip arthroplasty (THA). Modular junctions are a potential source of such wear products and are associated with secondary pseudotumour formation. We present a consecutive series of 17 patients treated at our unit for this complication following metal-on-highly cross-linked polyethylene (MoP) THA. We emphasise the risk of misdiagnosis as infection, and present the aggregate laboratory results and pathological findings in this series. The clinical presentation was pain, swelling or instability. Solid, cystic and mixed soft-tissue lesions were noted on imaging and confirmed intra-operatively. Corrosion at the head-neck junction was noted in all cases. No bacteria were isolated on multiple pre- and intra-operative samples yet the mean erythrocyte sedimentation rate was 49 (9 to 100) and C-reactive protein 32 (0.6 to 106) and stromal polymorphonuclear cell counts were noted in nine cases. Adverse soft-tissue reactions can occur in MoP THA owing to corrosion products released from the head-neck junction. The diagnosis should be carefully considered when investigating pain after THA. This may avoid the misdiagnosis of periprosthetic infection with an unidentified organism and mitigate the unnecessary management of these cases with complete single- or two-stage exchange.

Epithelioid angiosarcoma arising in a surgically constructed arteriovenous fistula: a rare complication of chronic immunosuppression in the setting of renal transplantation.

Immunosuppression in the setting of solid organ transplantation is associated with the development of a variety of malignant tumors, most commonly squamous carcinomas and non-Hodgkin's lymphomas. Sarcomas, apart from Kaposi's sarcoma, are relatively infrequent. We recently encountered a 71-year-old man with chronic renal failure, treated by allograft kidney transplantation, who developed a high-grade epithelioid angiosarcoma at the site of a nonfunctioning arteriovenous fistula, previously constructed for hemodialysis. At diagnosis, the patient had numerous satellite nodules of angiosarcoma involving the distal skin, soft tissues, and bones. After a below-elbow amputation, there was a rapid local recurrence at the amputation stump. Currently, the patient is alive with numerous pulmonary metastases, 6 months after amputation. A literature review identified three recently reported identical cases of epithelioid angiosarcoma arising in nonfunctioning arteriovenous fistulae. All three patients had been treated by kidney transplantation for renal failure, suggesting a possible causal association between these events. We performed polymerase chain reaction for human herpes virus 8, the recently recognized herpes virus proposed as a major etiologic agent of Kaposi's sarcoma, and possibly some conventional angiosarcomas, but we failed to identify any viral DNA within the tumor.